+ return 0;
+}
+
+int CmdHFiClassReader_Dump(const char *Cmd)
+{
+ uint8_t readerType = 0;
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ //uint8_t CC_temp[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t keytable[128] = {0};
+ int elite = 0;
+ uint8_t *used_key;
+ int i;
+ if (strlen(Cmd)<1)
+ {
+ PrintAndLog("Usage: hf iclass dump <Key> [e]");
+ PrintAndLog(" Key - A 16 byte master key");
+ PrintAndLog(" e - If 'e' is specified, the key is interpreted as the 16 byte");
+ PrintAndLog(" Custom Key (KCus), which can be obtained via reader-attack");
+ PrintAndLog(" See 'hf iclass sim 2'. This key should be on iclass-format");
+ PrintAndLog(" sample: hf iclass dump 0011223344556677");
+
+
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, KEY, 16))
+ {
+ PrintAndLog("KEY must include 16 HEX symbols");
+ return 1;
+ }
+
+ if (param_getchar(Cmd, 1) == 'e')
+ {
+ PrintAndLog("Elite switch on");
+ elite = 1;
+
+ //calc h2
+ hash2(KEY, keytable);
+ printarr_human_readable("keytable", keytable, 128);
+
+ }
+
+ UsbCommand resp;
+ uint8_t key_sel[8] = {0};
+ uint8_t key_sel_p[8] = { 0 };
+
+ //HACK -- Below is for testing without access to a tag
+ uint8_t fake_dummy_test = false;
+ if(fake_dummy_test)
+ {
+ uint8_t xdata[16] = {0x01,0x02,0x03,0x04,0xF7,0xFF,0x12,0xE0, //CSN from http://www.proxmark.org/forum/viewtopic.php?pid=11230#p11230
+ 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; // Just a random CC. Would be good to add a real testcase here
+ memcpy(resp.d.asBytes,xdata, 16);
+ resp.arg[0] = 2;
+ }
+
+ //End hack
+
+
+ UsbCommand c = {CMD_READER_ICLASS, {0}};
+ c.arg[0] = FLAG_ICLASS_READER_ONLY_ONCE;
+ if(!fake_dummy_test)
+ SendCommand(&c);
+
+
+
+ if (fake_dummy_test || WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ uint8_t * data = resp.d.asBytes;
+
+ memcpy(CSN,data,8);
+ memcpy(CCNR,data+8,8);
+
+ PrintAndLog("isOk:%02x", isOK);
+
+ if(isOK > 0)
+ {
+ PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+ }
+ if(isOK > 1)
+ {
+ if(elite)
+ {
+ //Get the key index (hash1)
+ uint8_t key_index[8] = {0};
+
+ hash1(CSN, key_index);
+ printvar("hash1", key_index,8);
+ for(i = 0; i < 8 ; i++)
+ key_sel[i] = keytable[key_index[i]] & 0xFF;
+ PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
+ printvar("k_sel", key_sel,8);
+ //Permute from iclass format to standard format
+ permutekey_rev(key_sel,key_sel_p);
+ used_key = key_sel_p;
+ }else{
+ //Perhaps this should also be permuted to std format?
+ // Something like the code below? I have no std system
+ // to test this with /Martin
+
+ //uint8_t key_sel_p[8] = { 0 };
+ //permutekey_rev(KEY,key_sel_p);
+ //used_key = key_sel_p;
+
+ used_key = KEY;
+
+ }
+
+ PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
+ printvar("Used key",used_key,8);
+ diversifyKey(CSN,used_key, div_key);
+ PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
+ printvar("Div key", div_key, 8);
+ printvar("CC_NR:",CCNR,12);
+ doMAC(CCNR,12,div_key, MAC);
+ printvar("MAC", MAC, 4);
+
+ UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
+ memcpy(d.d.asBytes, MAC, 4);
+ if(!fake_dummy_test) SendCommand(&d);
+
+ }else{
+ PrintAndLog("Failed to obtain CC! Aborting");
+ }
+ } else {
+ PrintAndLog("Command execute timeout");
+ }
+
+ return 0;
+}
+
+int CmdHFiClass_iso14443A_write(const char *Cmd)
+{
+ uint8_t readerType = 0;
+ uint8_t MAC[4]={0x00,0x00,0x00,0x00};
+ uint8_t KEY[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CSN[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t CCNR[12]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+ uint8_t div_key[8]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
+
+ uint8_t blockNo=0;
+ uint8_t bldata[8]={0};
+
+ if (strlen(Cmd)<3)
+ {
+ PrintAndLog("Usage: hf iclass write <Key> <Block> <Data>");
+ PrintAndLog(" sample: hf iclass write 0011223344556677 10 AAAAAAAAAAAAAAAA");
+ return 0;
+ }
+
+ if (param_gethex(Cmd, 0, KEY, 16))
+ {
+ PrintAndLog("KEY must include 16 HEX symbols");
+ return 1;
+ }
+
+ blockNo = param_get8(Cmd, 1);
+ if (blockNo>32)
+ {
+ PrintAndLog("Error: Maximum number of blocks is 32 for iClass 2K Cards!");
+ return 1;
+ }
+ if (param_gethex(Cmd, 2, bldata, 8))
+ {
+ PrintAndLog("Block data must include 8 HEX symbols");
+ return 1;
+ }
+
+ UsbCommand c = {CMD_ICLASS_ISO14443A_WRITE, {0}};
+ SendCommand(&c);
+ UsbCommand resp;
+
+ if (WaitForResponseTimeout(CMD_ACK,&resp,4500)) {
+ uint8_t isOK = resp.arg[0] & 0xff;
+ uint8_t * data = resp.d.asBytes;
+
+ memcpy(CSN,data,8);
+ memcpy(CCNR,data+8,8);
+ PrintAndLog("DEBUG: %s",sprint_hex(CSN,8));
+ PrintAndLog("DEBUG: %s",sprint_hex(CCNR,8));
projects / proxmark3-svn / blobdiff