a little cleanup

[proxmark3-svn] / client / cmdhw.c

diff --git a/client/cmdhw.c b/client/cmdhw.c
index 7218f3e9ab33b60508f82d1451ff5a91f6453d1e..74e476eb55067a3c72eb4c666cb82f32dd1f4086 100644 (file)
--- a/client/cmdhw.c
+++ b/client/cmdhw.c
@@ -18,6 +18,7 @@
 #include "cmdhw.h"
 #include "cmdmain.h"
 #include "cmddata.h"
+#include "data.h"
 
 /* low-level hardware control */
 
@@ -405,33 +406,72 @@ int CmdTune(const char *Cmd)
 int CmdVersion(const char *Cmd)
 {
 
+       clearCommandBuffer();
        UsbCommand c = {CMD_VERSION};
-       UsbCommand resp = {0, {0, 0, 0}};
+       static UsbCommand resp = {0, {0, 0, 0}};
 
-       SendCommand(&c);
-       if (WaitForResponseTimeout(CMD_ACK,&resp,1000) && Cmd != NULL) {
+       if (resp.arg[0] == 0 && resp.arg[1] == 0) { // no cached information available
+               SendCommand(&c);
+               if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+                       PrintAndLog("Prox/RFID mark3 RFID instrument");
+                       PrintAndLog((char*)resp.d.asBytes);
+                       lookupChipID(resp.arg[0], resp.arg[1]);
+               }
+       } else {
+               PrintAndLog("[[[ Cached information ]]]\n");
                PrintAndLog("Prox/RFID mark3 RFID instrument");
                PrintAndLog((char*)resp.d.asBytes);
                lookupChipID(resp.arg[0], resp.arg[1]);
+               PrintAndLog("");
+       }
+       return 0;
+}
+
+int CmdStatus(const char *Cmd)
+{
+       uint8_t speed_test_buffer[USB_CMD_DATA_SIZE];
+       sample_buf = speed_test_buffer;
+
+       clearCommandBuffer();
+       UsbCommand c = {CMD_STATUS};
+       SendCommand(&c);
+       if (!WaitForResponseTimeout(CMD_ACK,&c,1900)) {
+               PrintAndLog("Status command failed. USB Speed Test timed out");
        }
+       return 0;
+}
+
 
+int CmdPing(const char *Cmd)
+{
+       clearCommandBuffer();
+       UsbCommand resp;
+       UsbCommand c = {CMD_PING};
+       SendCommand(&c);
+       if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
+               PrintAndLog("Ping successfull");
+       }else{
+               PrintAndLog("Ping failed");
+       }
        return 0;
 }
 
 static command_t CommandTable[] = 
 {
-  {"help",          CmdHelp,        1, "This help"},
-  {"detectreader",  CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
-  {"fpgaoff",       CmdFPGAOff,     0, "Set FPGA off"},
-  {"lcd",           CmdLCD,         0, "<HEX command> <count> -- Send command/data to LCD"},
-  {"lcdreset",      CmdLCDReset,    0, "Hardware reset LCD"},
-  {"readmem",       CmdReadmem,     0, "[address] -- Read memory at decimal address from flash"},
-  {"reset",         CmdReset,       0, "Reset the Proxmark3"},
-  {"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
-  {"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
-  {"tune",          CmdTune,        0, "Measure antenna tuning"},
-  {"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
-  {NULL, NULL, 0, NULL}
+       {"help",          CmdHelp,        1, "This help"},
+       {"detectreader",  CmdDetectReader,0, "['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)"},
+       {"fpgaoff",       CmdFPGAOff,     0, "Set FPGA off"},
+       {"lcd",           CmdLCD,         0, "<HEX command> <count> -- Send command/data to LCD"},
+       {"lcdreset",      CmdLCDReset,    0, "Hardware reset LCD"},
+       {"readmem",       CmdReadmem,     0, "[address] -- Read memory at decimal address from flash"},
+       {"reset",         CmdReset,       0, "Reset the Proxmark3"},
+       {"setlfdivisor",  CmdSetDivisor,  0, "<19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)"},
+       {"setmux",        CmdSetMux,      0, "<loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value"},
+       {"tune",          CmdTune,        0, "['l'|'h'] -- Measure antenna tuning (option 'l' or 'h' to limit to LF or HF)"},
+       {"version",       CmdVersion,     0, "Show version information about the connected Proxmark"},
+       {"status",        CmdStatus,      0, "Show runtime status information about the connected Proxmark"},
+       {"ping",          CmdPing,        0, "Test if the pm3 is responsive"},
+       {NULL, NULL, 0, NULL}
 };
 
 int CmdHW(const char *Cmd)