code cleaning (#445)

[proxmark3-svn] / CHANGELOG.md

diff --git a/CHANGELOG.md b/CHANGELOG.md
index 59e87277c9ccc62ebe0d5c12d597e2afb4c62fce..044538c4679274e6b6c0b011eb313c8bfb3cab70 100644 (file)
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -2,9 +2,64 @@
 All notable changes to this project will be documented in this file.
 This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
 
 All notable changes to this project will be documented in this file.
 This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
 

+

 ## [unreleased][unreleased]
 
 ## [unreleased][unreleased]
 

+### Changed
+- Improved backdoor detection missbehaving magic s50/1k tag (Fl0-0)
+- Deleted wipe functionality from `hf mf csetuid` (Merlok)
+- Changed `hf mf nested` logic (Merlok)
+- Added `hf mf nested` mode: autosearch keys for attack (from well known keys) (Merlok)
+- `hf mf nested` Check keys after they have found (Merlok)
+- `hf mf chk` Move main cycle to arm (Merlok)
+- Changed proxmark command line parameter `flush` to `-f` or `-flush` (Merlok)
+
+### Fixed
+- Changed start sequence in Qt mode (fix: short commands hangs main Qt thread) (Merlok)
+
+### Added
+- Added PAC/Stanley detection to lf search (marshmellow)
+- Added lf pac demod and lf pac read - extracts the raw blocks from a PAC/Stanley tag (marshmellow)
+- Added hf mf c* commands compatibity for 4k and gen1b backdoor (Fl0-0)
+- Added backdoor detection for gen1b magic s70/4k tag (Fl0-0)
+- Added data fsktonrz, a fsk cleaning/demodulating routine for weak fsk signal. Note: follow this up with a `data rawdemod nr` to finish demoding your signal. (marshmellow)
+- Added lf em 410xbrute, LF EM410x reader bruteforce attack by simulating UIDs from a file (Fl0-0)
+- Added `hf mf cwipe` command. It wipes "magic Chinese" card. For 1a generation it uses card's "wipe" command. For gen1a and gen1b it uses a write command. (Merlok)
+- Added to `hf mf nested` source key check before attack (Merlok)
+- Added to `hf mf nested` after attack it checks all found keys on non-open sectors (Merlok)
+- `hf mf chk` Added setings to set iso14443a operations timeout. default timeout set to 500us (Merlok)
+- Added to `hf mf nested` parameters `s` and `ss` for checking slow cards (Merlok)
+- Added to proxmark command line parameters `w` - wait 20s for serial port (Merlok)
+- Added to proxmark command line parameters `c` and `l` - execute command and lua script from command line (Merlok)
+- Added to proxmark ability to execute commands from stdin (pipe) (Merlok)
+
+## [3.0.1][2017-06-08]
+
+### Fixed
+- Compiles on OS X
+- Compiles with gcc 4.9
+- Compiles for non-Intel CPUs
+
+
+## [3.0.0][2017-06-05]
+
+### Added
+- Added lf hitag write 24, the command writes a block to hitag2 tags in crypto mode (henjo)
+

 ### Added
 ### Added

+- Added hf mf hardnested, an attack working for hardened Mifare cards (EV1, Mifare Plus SL1) where hf mf nested fails
+- Added experimental testmode write option for t55xx (danger) (marshmellow)
+- Added t55xx p1detect to `lf search` chip detections (marshmellow)
+- Added lf t55xx p1detect, detect page 1 of a t55xx tag based on E015 mfg code (marshmellow)
+- Added lf noralsy demod, read, clone, sim commands (iceman)
+- Added lf jablotron demod, read, clone, sim commands (iceman)
+- Added lf nexwatch read   - reads a nexwatch tag from the antenna
+- Added lf paradox read    - reads a paradox tag from the antenna
+- Added lf fdx sim (iceman)
+- Added lf fdx clone       - clones an fdx-b animal tag to t55x7 or q5 (iceman)
+- Added lf fdx read        - reads a fdx-b tag from the antenna (iceman)
+- Added lf gproxii read    - reads a gproxii tag from the antenna (marshmellow)
+- Added lf indala read     - reads an indala tag from the antenna (marshmellow)

 - Added lf visa2000 demod, read, clone, sim commands (iceman)
 - Added markers in the graph around found Sequence Terminator after askmandemod.
 - Added data mtrim <start> <stop> command to trim out samples between start and stop
 - Added lf visa2000 demod, read, clone, sim commands (iceman)
 - Added markers in the graph around found Sequence Terminator after askmandemod.
 - Added data mtrim <start> <stop> command to trim out samples between start and stop


@@ -26,7 +81,7 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 - `lf viking read` - read viking tag and output ID
 - `lf t55xx wipe`  - sets t55xx back to factory defaults
 - Added viking demod to `lf search` (marshmellow)
 - `lf viking read` - read viking tag and output ID
 - `lf t55xx wipe`  - sets t55xx back to factory defaults
 - Added viking demod to `lf search` (marshmellow)

-- `data askvikingdemod` demod viking id tag from graphbuffer (marshmellow)
+- `lf viking demod` demod viking id tag from graphbuffer (marshmellow)

 - `lf t55xx resetread` added reset then read command - should allow determining start of stream transmissions (marshmellow)
 - `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow)
 - `hf iclass managekeys` to save, load and manage iclass keys.  (adjusted most commands to accept a loaded key in memory) (marshmellow)
 - `lf t55xx resetread` added reset then read command - should allow determining start of stream transmissions (marshmellow)
 - `lf t55xx wakeup` added wake with password (AOR) to allow lf search or standard lf read after (iceman, marshmellow)
 - `hf iclass managekeys` to save, load and manage iclass keys.  (adjusted most commands to accept a loaded key in memory) (marshmellow)


@@ -45,6 +100,20 @@ This project uses the changelog in accordance with [keepchangelog](http://keepac
 - Added option c to 'hf list' (mark CRC bytes) (piwi)
 
 ### Changed
 - Added option c to 'hf list' (mark CRC bytes) (piwi)
 
 ### Changed

+- Adjusted the lf demods to auto align and set the grid for the graph plot. 
+- `lf snoop` now automatically gets samples from the device
+- `lf read` now accepts [#samples] as arg. && now automatically gets samples from the device
+- adjusted lf t5 chip timings to use WaitUS. and adjusted the readblock timings
+    appears to have more consistent results with more antennas.
+- `lf t5 wakeup` has been adjusted to not need the p in front of the pwd arg.
+- `data psknexwatchdemod` has been moved to `lf nexwatch demod` (reads from graphbuffer)
+- `data fskparadoxdemod` has been moved to `lf paradox demod` (reads from graphbuffer)
+- `data fdxdemod` has been moved to `lf fdx demod` (reads from graphbuffer)
+- `data askgproxiidemod has been moved to `lf gproxii demod` (reads from graphbuffer)
+- `lf indalaclone` has been moved to `lf indala clone`
+- `lf indalademod` has been moved to `lf indala altdemod` (reads from graphbuffer)
+- `data pskindalademod` has been moved to `lf indala demod` (reads from graphbuffer)
+- `data askvikingdemod` has been moved to `lf viking demod` (reads from graphbuffer)

 - `data fskpyramiddemod` has been moved to `lf pyramid demod` (reads from graphbuffer)
 - `data fskiodemod` has been moved to `lf io demod` (reads from graphbuffer)
 - `lf io fskdemod` has been renamed to `lf io read` (reads from antenna)
 - `data fskpyramiddemod` has been moved to `lf pyramid demod` (reads from graphbuffer)
 - `data fskiodemod` has been moved to `lf io demod` (reads from graphbuffer)
 - `lf io fskdemod` has been renamed to `lf io read` (reads from antenna)