//-----------------------------------------------------------------------------
// Copyright (C) 2018 Merlok
+// Copyright (C) 2018 drHatson
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
#include "ui.h"
#include "cmdhf14a.h"
#include "mifare.h"
+#include "mifare4.h"
+#include "cliparser/cliparser.h"
+#include "polarssl/libpcrypto.h"
+
+static const uint8_t DefaultKey[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+typedef struct {
+ uint8_t Code;
+ const char *Description;
+} PlusErrorsElm;
+
+static const PlusErrorsElm PlusErrors[] = {
+ {0xFF, ""},
+ {0x00, "Transfer cannot be granted within the current authentication."},
+ {0x06, "Access Conditions not fulfilled. Block does not exist, block is not a value block."},
+ {0x07, "Too many read or write commands in the session or in the transaction."},
+ {0x08, "Invalid MAC in command or response"},
+ {0x09, "Block Number is not valid"},
+ {0x0a, "Invalid block number, not existing block number"},
+ {0x0b, "The current command code not available at the current card state."},
+ {0x0c, "Length error"},
+ {0x0f, "General Manipulation Error. Failure in the operation of the PICC (cannot write to the data block), etc."},
+ {0x90, "OK"},
+};
+int PlusErrorsLen = sizeof(PlusErrors) / sizeof(PlusErrorsElm);
+
+const char * GetErrorDescription(uint8_t errorCode) {
+ for(int i = 0; i < PlusErrorsLen; i++)
+ if (errorCode == PlusErrors[i].Code)
+ return PlusErrors[i].Description;
+
+ return PlusErrors[0].Description;
+}
static int CmdHelp(const char *Cmd);
+static bool VerboseMode = false;
+void SetVerboseMode(bool verbose) {
+ VerboseMode = verbose;
+}
+
+int intExchangeRAW14aPlus(uint8_t *datain, int datainlen, bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen) {
+ if(VerboseMode)
+ PrintAndLog(">>> %s", sprint_hex(datain, datainlen));
+
+ int res = ExchangeRAW14a(datain, datainlen, activateField, leaveSignalON, dataout, maxdataoutlen, dataoutlen);
+
+ if(VerboseMode)
+ PrintAndLog("<<< %s", sprint_hex(dataout, *dataoutlen));
+
+ return res;
+}
+
+int MFPWritePerso(uint8_t *keyNum, uint8_t *key, bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen) {
+ uint8_t rcmd[3 + 16] = {0xa8, keyNum[1], keyNum[0], 0x00};
+ memmove(&rcmd[3], key, 16);
+
+ return intExchangeRAW14aPlus(rcmd, sizeof(rcmd), activateField, leaveSignalON, dataout, maxdataoutlen, dataoutlen);
+}
+
+int MFPCommitPerso(bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen) {
+ uint8_t rcmd[1] = {0xaa};
+
+ return intExchangeRAW14aPlus(rcmd, sizeof(rcmd), activateField, leaveSignalON, dataout, maxdataoutlen, dataoutlen);
+}
+
+int MFPReadBlock(mf4Session *session, bool plain, uint8_t blockNum, uint8_t blockCount, bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen, uint8_t *mac) {
+ uint8_t rcmd[4 + 8] = {(plain?(0x37):(0x33)), blockNum, 0x00, blockCount};
+ if (!plain && session)
+ CalculateMAC(session, mtypReadCmd, blockNum, blockCount, rcmd, 4, &rcmd[4], VerboseMode);
+
+ int res = intExchangeRAW14aPlus(rcmd, plain?4:sizeof(rcmd), activateField, leaveSignalON, dataout, maxdataoutlen, dataoutlen);
+ if(res)
+ return res;
+
+ if (session)
+ session->R_Ctr++;
+
+ if(session && mac && *dataoutlen > 11)
+ CalculateMAC(session, mtypReadResp, blockNum, blockCount, dataout, *dataoutlen - 8 - 2, mac, VerboseMode);
+
+ return 0;
+}
+
+int MFPWriteBlock(mf4Session *session, uint8_t blockNum, uint8_t *data, bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen, uint8_t *mac) {
+ uint8_t rcmd[1 + 2 + 16 + 8] = {0xA3, blockNum, 0x00};
+ memmove(&rcmd[3], data, 16);
+ if (session)
+ CalculateMAC(session, mtypWriteCmd, blockNum, 1, rcmd, 19, &rcmd[19], VerboseMode);
+
+ int res = intExchangeRAW14aPlus(rcmd, sizeof(rcmd), activateField, leaveSignalON, dataout, maxdataoutlen, dataoutlen);
+ if(res)
+ return res;
+
+ if (session)
+ session->W_Ctr++;
+
+ if(session && mac && *dataoutlen > 3)
+ CalculateMAC(session, mtypWriteResp, blockNum, 1, dataout, *dataoutlen, mac, VerboseMode);
+
+ return 0;
+}
+
int CmdHFMFPInfo(const char *cmd) {
if (cmd && strlen(cmd) > 0)
return 0;
}
+int CmdHFMFPWritePerso(const char *cmd) {
+ uint8_t keyNum[64] = {0};
+ int keyNumLen = 0;
+ uint8_t key[64] = {0};
+ int keyLen = 0;
+
+ CLIParserInit("hf mfp wrp",
+ "Executes Write Perso command. Can be used in SL0 mode only.",
+ "Usage:\n\thf mfp wrp 4000 000102030405060708090a0b0c0d0e0f -> write key (00..0f) to key number 4000 \n"
+ "\thf mfp wrp 4000 -> write default key(0xff..0xff) to key number 4000");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("vV", "verbose", "show internal data."),
+ arg_str1(NULL, NULL, "<HEX key number (2b)>", NULL),
+ arg_strx0(NULL, NULL, "<HEX key (16b)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, true);
+
+ bool verbose = arg_get_lit(1);
+ CLIGetHexWithReturn(2, keyNum, &keyNumLen);
+ CLIGetHexWithReturn(3, key, &keyLen);
+ CLIParserFree();
+
+ SetVerboseMode(verbose);
+
+ if (!keyLen) {
+ memmove(key, DefaultKey, 16);
+ keyLen = 16;
+ }
+
+ if (keyNumLen != 2) {
+ PrintAndLog("Key number length must be 2 bytes instead of: %d", keyNumLen);
+ return 1;
+ }
+ if (keyLen != 16) {
+ PrintAndLog("Key length must be 16 bytes instead of: %d", keyLen);
+ return 1;
+ }
+
+ uint8_t data[250] = {0};
+ int datalen = 0;
+
+ int res = MFPWritePerso(keyNum, key, true, false, data, sizeof(data), &datalen);
+ if (res) {
+ PrintAndLog("Exchange error: %d", res);
+ return res;
+ }
+
+ if (datalen != 3) {
+ PrintAndLog("Command must return 3 bytes instead of: %d", datalen);
+ return 1;
+ }
+
+ if (data[0] != 0x90) {
+ PrintAndLog("Command error: %02x %s", data[0], GetErrorDescription(data[0]));
+ return 1;
+ }
+ PrintAndLog("Write OK.");
+
+ return 0;
+}
+
+uint16_t CardAddresses[] = {0x9000, 0x9001, 0x9002, 0x9003, 0x9004, 0xA000, 0xA001, 0xA080, 0xA081, 0xC000, 0xC001};
+
+int CmdHFMFPInitPerso(const char *cmd) {
+ int res;
+ uint8_t key[256] = {0};
+ int keyLen = 0;
+ uint8_t keyNum[2] = {0};
+ uint8_t data[250] = {0};
+ int datalen = 0;
+
+ CLIParserInit("hf mfp initp",
+ "Executes Write Perso command for all card's keys. Can be used in SL0 mode only.",
+ "Usage:\n\thf mfp initp 000102030405060708090a0b0c0d0e0f -> fill all the keys with key (00..0f)\n"
+ "\thf mfp initp -vv -> fill all the keys with default key(0xff..0xff) and show all the data exchange");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_litn("vV", "verbose", 0, 2, "show internal data."),
+ arg_strx0(NULL, NULL, "<HEX key (16b)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, true);
+
+ bool verbose = arg_get_lit(1);
+ bool verbose2 = arg_get_lit(1) > 1;
+ CLIGetHexWithReturn(2, key, &keyLen);
+ CLIParserFree();
+
+ if (keyLen && keyLen != 16) {
+ PrintAndLog("Key length must be 16 bytes instead of: %d", keyLen);
+ return 1;
+ }
+
+ if (!keyLen)
+ memmove(key, DefaultKey, 16);
+
+ SetVerboseMode(verbose2);
+ for (uint16_t sn = 0x4000; sn < 0x4050; sn++) {
+ keyNum[0] = sn >> 8;
+ keyNum[1] = sn & 0xff;
+ res = MFPWritePerso(keyNum, key, (sn == 0x4000), true, data, sizeof(data), &datalen);
+ if (!res && (datalen == 3) && data[0] == 0x09) {
+ PrintAndLog("2k card detected.");
+ break;
+ }
+ if (res || (datalen != 3) || data[0] != 0x90) {
+ PrintAndLog("Write error on address %04x", sn);
+ break;
+ }
+ }
+
+ SetVerboseMode(verbose);
+ for (int i = 0; i < sizeof(CardAddresses) / 2; i++) {
+ keyNum[0] = CardAddresses[i] >> 8;
+ keyNum[1] = CardAddresses[i] & 0xff;
+ res = MFPWritePerso(keyNum, key, false, true, data, sizeof(data), &datalen);
+ if (!res && (datalen == 3) && data[0] == 0x09) {
+ PrintAndLog("Skipped[%04x]...", CardAddresses[i]);
+ } else {
+ if (res || (datalen != 3) || data[0] != 0x90) {
+ PrintAndLog("Write error on address %04x", CardAddresses[i]);
+ break;
+ }
+ }
+ }
+
+ DropField();
+
+ if (res)
+ return res;
+
+ PrintAndLog("Done.");
+
+ return 0;
+}
+
+int CmdHFMFPCommitPerso(const char *cmd) {
+ CLIParserInit("hf mfp commitp",
+ "Executes Commit Perso command. Can be used in SL0 mode only.",
+ "Usage:\n\thf mfp commitp -> \n");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("vV", "verbose", "show internal data."),
+ arg_int0(NULL, NULL, "SL mode", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, true);
+
+ bool verbose = arg_get_lit(1);
+ CLIParserFree();
+
+ SetVerboseMode(verbose);
+
+ uint8_t data[250] = {0};
+ int datalen = 0;
+
+ int res = MFPCommitPerso(true, false, data, sizeof(data), &datalen);
+ if (res) {
+ PrintAndLog("Exchange error: %d", res);
+ return res;
+ }
+
+ if (datalen != 3) {
+ PrintAndLog("Command must return 3 bytes instead of: %d", datalen);
+ return 1;
+ }
+
+ if (data[0] != 0x90) {
+ PrintAndLog("Command error: %02x %s", data[0], GetErrorDescription(data[0]));
+ return 1;
+ }
+ PrintAndLog("Switch level OK.");
+
+ return 0;
+}
+
+int CmdHFMFPAuth(const char *cmd) {
+ uint8_t keyn[250] = {0};
+ int keynlen = 0;
+ uint8_t key[250] = {0};
+ int keylen = 0;
+
+ CLIParserInit("hf mfp auth",
+ "Executes AES authentication command for Mifare Plus card",
+ "Usage:\n\thf mfp auth 4000 000102030405060708090a0b0c0d0e0f -> executes authentication\n"
+ "\thf mfp auth 9003 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -v -> executes authentication and shows all the system data\n");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("vV", "verbose", "show internal data."),
+ arg_str1(NULL, NULL, "<Key Num (HEX 2 bytes)>", NULL),
+ arg_str1(NULL, NULL, "<Key Value (HEX 16 bytes)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, true);
+
+ bool verbose = arg_get_lit(1);
+ CLIGetHexWithReturn(2, keyn, &keynlen);
+ CLIGetHexWithReturn(3, key, &keylen);
+ CLIParserFree();
+
+ if (keynlen != 2) {
+ PrintAndLog("ERROR: <Key Num> must be 2 bytes long instead of: %d", keynlen);
+ return 1;
+ }
+
+ if (keylen != 16) {
+ PrintAndLog("ERROR: <Key Value> must be 16 bytes long instead of: %d", keylen);
+ return 1;
+ }
+
+ return MifareAuth4(NULL, keyn, key, true, false, verbose);
+}
+
+int CmdHFMFPRdbl(const char *cmd) {
+ uint8_t keyn[2] = {0};
+ uint8_t key[250] = {0};
+ int keylen = 0;
+
+ CLIParserInit("hf mfp rdbl",
+ "Reads several blocks from Mifare Plus card.",
+ "Usage:\n\thf mfp rdbl 0 000102030405060708090a0b0c0d0e0f -> executes authentication and read block 0 data\n"
+ "\thf mfp rdbl 1 -v -> executes authentication and shows sector 1 data with default key 0xFF..0xFF and some additional data\n");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("vV", "verbose", "show internal data."),
+ arg_int0("nN", "count", "blocks count (by default 1).", NULL),
+ arg_lit0("bB", "keyb", "use key B (by default keyA)."),
+ arg_lit0("pP", "plain", "plain communication mode between reader and card."),
+ arg_int1(NULL, NULL, "<Block Num (0..255)>", NULL),
+ arg_str0(NULL, NULL, "<Key Value (HEX 16 bytes)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, false);
+
+ bool verbose = arg_get_lit(1);
+ int blocksCount = arg_get_int_def(2, 1);
+ bool keyB = arg_get_lit(3);
+ int plain = arg_get_lit(4);
+ uint32_t blockn = arg_get_int(5);
+ CLIGetHexWithReturn(6, key, &keylen);
+ CLIParserFree();
+
+ SetVerboseMode(verbose);
+
+ if (!keylen) {
+ memmove(key, DefaultKey, 16);
+ keylen = 16;
+ }
+
+ if (blockn > 255) {
+ PrintAndLog("ERROR: <Block Num> must be in range [0..255] instead of: %d", blockn);
+ return 1;
+ }
+
+ if (keylen != 16) {
+ PrintAndLog("ERROR: <Key Value> must be 16 bytes long instead of: %d", keylen);
+ return 1;
+ }
+
+ // 3 blocks - wo iso14443-4 chaining
+ if (blocksCount > 3) {
+ PrintAndLog("ERROR: blocks count must be less than 3 instead of: %d", blocksCount);
+ return 1;
+ }
+
+ if (blocksCount > 1 && mfIsSectorTrailer(blockn)) {
+ PrintAndLog("WARNING: trailer!");
+ }
+
+ uint8_t sectorNum = mfSectorNum(blockn & 0xff);
+ uint16_t uKeyNum = 0x4000 + sectorNum * 2 + (keyB ? 1 : 0);
+ keyn[0] = uKeyNum >> 8;
+ keyn[1] = uKeyNum & 0xff;
+ if (verbose)
+ PrintAndLog("--block:%d sector[%d]:%02x key:%04x", blockn, mfNumBlocksPerSector(sectorNum), sectorNum, uKeyNum);
+
+ mf4Session session;
+ int res = MifareAuth4(&session, keyn, key, true, true, verbose);
+ if (res) {
+ PrintAndLog("Authentication error: %d", res);
+ return res;
+ }
+
+ uint8_t data[250] = {0};
+ int datalen = 0;
+ uint8_t mac[8] = {0};
+ res = MFPReadBlock(&session, plain, blockn & 0xff, blocksCount, false, false, data, sizeof(data), &datalen, mac);
+ if (res) {
+ PrintAndLog("Read error: %d", res);
+ return res;
+ }
+
+ if (datalen && data[0] != 0x90) {
+ PrintAndLog("Card read error: %02x %s", data[0], GetErrorDescription(data[0]));
+ return 6;
+ }
+
+ if (datalen != 1 + blocksCount * 16 + 8 + 2) {
+ PrintAndLog("Error return length:%d", datalen);
+ return 5;
+ }
+
+ int indx = blockn;
+ for(int i = 0; i < blocksCount; i++) {
+ PrintAndLog("data[%03d]: %s", indx, sprint_hex(&data[1 + i * 16], 16));
+ indx++;
+ if (mfIsSectorTrailer(indx) && i != blocksCount - 1){
+ PrintAndLog("data[%03d]: ------------------- trailer -------------------", indx);
+ indx++;
+ }
+ }
+
+ if (memcmp(&data[blocksCount * 16 + 1], mac, 8)) {
+ PrintAndLog("WARNING: mac not equal...");
+ PrintAndLog("MAC card: %s", sprint_hex(&data[blocksCount * 16 + 1], 8));
+ PrintAndLog("MAC reader: %s", sprint_hex(mac, 8));
+ } else {
+ if(verbose)
+ PrintAndLog("MAC: %s", sprint_hex(&data[blocksCount * 16 + 1], 8));
+ }
+
+ return 0;
+}
+
+int CmdHFMFPRdsc(const char *cmd) {
+ uint8_t keyn[2] = {0};
+ uint8_t key[250] = {0};
+ int keylen = 0;
+
+ CLIParserInit("hf mfp rdsc",
+ "Reads one sector from Mifare Plus card.",
+ "Usage:\n\thf mfp rdsc 0 000102030405060708090a0b0c0d0e0f -> executes authentication and read sector 0 data\n"
+ "\thf mfp rdsc 1 -v -> executes authentication and shows sector 1 data with default key 0xFF..0xFF and some additional data\n");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("vV", "verbose", "show internal data."),
+ arg_lit0("bB", "keyb", "use key B (by default keyA)."),
+ arg_lit0("pP", "plain", "plain communication mode between reader and card."),
+ arg_int1(NULL, NULL, "<Sector Num (0..255)>", NULL),
+ arg_str0(NULL, NULL, "<Key Value (HEX 16 bytes)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, false);
+
+ bool verbose = arg_get_lit(1);
+ bool keyB = arg_get_lit(2);
+ bool plain = arg_get_lit(3);
+ uint32_t sectorNum = arg_get_int(4);
+ CLIGetHexWithReturn(5, key, &keylen);
+ CLIParserFree();
+
+ SetVerboseMode(verbose);
+
+ if (!keylen) {
+ memmove(key, DefaultKey, 16);
+ keylen = 16;
+ }
+
+ if (sectorNum > 39) {
+ PrintAndLog("ERROR: <Sector Num> must be in range [0..39] instead of: %d", sectorNum);
+ return 1;
+ }
+
+ if (keylen != 16) {
+ PrintAndLog("ERROR: <Key Value> must be 16 bytes long instead of: %d", keylen);
+ return 1;
+ }
+
+ uint16_t uKeyNum = 0x4000 + sectorNum * 2 + (keyB ? 1 : 0);
+ keyn[0] = uKeyNum >> 8;
+ keyn[1] = uKeyNum & 0xff;
+ if (verbose)
+ PrintAndLog("--sector[%d]:%02x key:%04x", mfNumBlocksPerSector(sectorNum), sectorNum, uKeyNum);
+
+ mf4Session session;
+ int res = MifareAuth4(&session, keyn, key, true, true, verbose);
+ if (res) {
+ PrintAndLog("Authentication error: %d", res);
+ return res;
+ }
+
+ uint8_t data[250] = {0};
+ int datalen = 0;
+ uint8_t mac[8] = {0};
+ for(int n = mfFirstBlockOfSector(sectorNum); n < mfFirstBlockOfSector(sectorNum) + mfNumBlocksPerSector(sectorNum); n++) {
+ res = MFPReadBlock(&session, plain, n & 0xff, 1, false, true, data, sizeof(data), &datalen, mac);
+ if (res) {
+ PrintAndLog("Read error: %d", res);
+ DropField();
+ return res;
+ }
+
+ if (datalen && data[0] != 0x90) {
+ PrintAndLog("Card read error: %02x %s", data[0], GetErrorDescription(data[0]));
+ DropField();
+ return 6;
+ }
+ if (datalen != 1 + 16 + 8 + 2) {
+ PrintAndLog("Error return length:%d", datalen);
+ DropField();
+ return 5;
+ }
+
+ PrintAndLog("data[%03d]: %s", n, sprint_hex(&data[1], 16));
+
+ if (memcmp(&data[1 + 16], mac, 8)) {
+ PrintAndLog("WARNING: mac on block %d not equal...", n);
+ PrintAndLog("MAC card: %s", sprint_hex(&data[1 + 16], 8));
+ PrintAndLog("MAC reader: %s", sprint_hex(mac, 8));
+ } else {
+ if(verbose)
+ PrintAndLog("MAC: %s", sprint_hex(&data[1 + 16], 8));
+ }
+ }
+ DropField();
+
+ return 0;
+}
+
+int CmdHFMFPWrbl(const char *cmd) {
+ uint8_t keyn[2] = {0};
+ uint8_t key[250] = {0};
+ int keylen = 0;
+ uint8_t datain[250] = {0};
+ int datainlen = 0;
+
+ CLIParserInit("hf mfp wrbl",
+ "Writes one block to Mifare Plus card.",
+ "Usage:\n\thf mfp wrbl 1 ff0000000000000000000000000000ff 000102030405060708090a0b0c0d0e0f -> writes block 1 data\n"
+ "\thf mfp wrbl 2 ff0000000000000000000000000000ff -v -> writes block 2 data with default key 0xFF..0xFF and some additional data\n");
+
+ void* argtable[] = {
+ arg_param_begin,
+ arg_lit0("vV", "verbose", "show internal data."),
+ arg_lit0("bB", "keyb", "use key B (by default keyA)."),
+ arg_int1(NULL, NULL, "<Block Num (0..255)>", NULL),
+ arg_str1(NULL, NULL, "<Data (HEX 16 bytes)>", NULL),
+ arg_str0(NULL, NULL, "<Key (HEX 16 bytes)>", NULL),
+ arg_param_end
+ };
+ CLIExecWithReturn(cmd, argtable, false);
+
+ bool verbose = arg_get_lit(1);
+ bool keyB = arg_get_lit(2);
+ uint32_t blockNum = arg_get_int(3);
+ CLIGetHexWithReturn(4, datain, &datainlen);
+ CLIGetHexWithReturn(5, key, &keylen);
+ CLIParserFree();
+
+ SetVerboseMode(verbose);
+
+ if (!keylen) {
+ memmove(key, DefaultKey, 16);
+ keylen = 16;
+ }
+
+ if (blockNum > 39) {
+ PrintAndLog("ERROR: <Block Num> must be in range [0..255] instead of: %d", blockNum);
+ return 1;
+ }
+
+ if (keylen != 16) {
+ PrintAndLog("ERROR: <Key> must be 16 bytes long instead of: %d", keylen);
+ return 1;
+ }
+
+ if (datainlen != 16) {
+ PrintAndLog("ERROR: <Data> must be 16 bytes long instead of: %d", datainlen);
+ return 1;
+ }
+
+ uint8_t sectorNum = mfSectorNum(blockNum & 0xff);
+ uint16_t uKeyNum = 0x4000 + sectorNum * 2 + (keyB ? 1 : 0);
+ keyn[0] = uKeyNum >> 8;
+ keyn[1] = uKeyNum & 0xff;
+ if (verbose)
+ PrintAndLog("--block:%d sector[%d]:%02x key:%04x", blockNum & 0xff, mfNumBlocksPerSector(sectorNum), sectorNum, uKeyNum);
+
+ mf4Session session;
+ int res = MifareAuth4(&session, keyn, key, true, true, verbose);
+ if (res) {
+ PrintAndLog("Authentication error: %d", res);
+ return res;
+ }
+
+ uint8_t data[250] = {0};
+ int datalen = 0;
+ uint8_t mac[8] = {0};
+ res = MFPWriteBlock(&session, blockNum & 0xff, datain, false, false, data, sizeof(data), &datalen, mac);
+ if (res) {
+ PrintAndLog("Write error: %d", res);
+ DropField();
+ return res;
+ }
+
+ if (datalen != 3 && (datalen != 3 + 8)) {
+ PrintAndLog("Error return length:%d", datalen);
+ DropField();
+ return 5;
+ }
+
+ if (datalen && data[0] != 0x90) {
+ PrintAndLog("Card write error: %02x %s", data[0], GetErrorDescription(data[0]));
+ DropField();
+ return 6;
+ }
+
+ if (memcmp(&data[1], mac, 8)) {
+ PrintAndLog("WARNING: mac not equal...");
+ PrintAndLog("MAC card: %s", sprint_hex(&data[1], 8));
+ PrintAndLog("MAC reader: %s", sprint_hex(mac, 8));
+ } else {
+ if(verbose)
+ PrintAndLog("MAC: %s", sprint_hex(&data[1], 8));
+ }
+
+ DropField();
+ PrintAndLog("Write OK.");
+ return 0;
+}
+
static command_t CommandTable[] =
{
{"help", CmdHelp, 1, "This help"},
{"info", CmdHFMFPInfo, 0, "Info about Mifare Plus tag"},
+ {"wrp", CmdHFMFPWritePerso, 0, "Write Perso command"},
+ {"initp", CmdHFMFPInitPerso, 0, "Fills all the card's keys"},
+ {"commitp", CmdHFMFPCommitPerso, 0, "Move card to SL1 or SL3 mode"},
+ {"auth", CmdHFMFPAuth, 0, "Authentication"},
+ {"rdbl", CmdHFMFPRdbl, 0, "Read blocks"},
+ {"rdsc", CmdHFMFPRdsc, 0, "Read sectors"},
+ {"wrbl", CmdHFMFPWrbl, 0, "Write blocks"},
{NULL, NULL, 0, NULL}
};
projects / proxmark3-svn / blobdiff