#include "apps.h"
#include "BigBuf.h"
-
-
void print_result(char *name, uint8_t *buf, size_t len) {
- uint8_t *p = buf;
+ uint8_t *p = buf;
- if ( len % 16 == 0 ) {
- for(; p-buf < len; p += 16)
- Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+ if ( len % 16 == 0 ) {
+ for(; p-buf < len; p += 16)
+ Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
name,
p-buf,
len,
p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]
- );
- }
- else {
- for(; p-buf < len; p += 8)
- Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x", name, p-buf, len, p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
- }
+ );
+ }
+ else {
+ for(; p-buf < len; p += 8)
+ Dbprintf("[%s:%d/%d] %02x %02x %02x %02x %02x %02x %02x %02x",
+ name,
+ p-buf,
+ len,
+ p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+ }
}
size_t nbytes(size_t nbits) {
}
uint32_t SwapBits(uint32_t value, int nrbits) {
- int i;
uint32_t newvalue = 0;
- for(i = 0; i < nrbits; i++) {
+ for(int i = 0; i < nrbits; i++) {
newvalue ^= ((value >> i) & 1) << (nrbits - 1 - i);
}
return newvalue;
}
-void num_to_bytes(uint64_t n, size_t len, uint8_t* dest)
-{
+void num_to_bytes(uint64_t n, size_t len, uint8_t* dest) {
while (len--) {
dest[len] = (uint8_t) n;
n >>= 8;
}
}
-uint64_t bytes_to_num(uint8_t* src, size_t len)
-{
+uint64_t bytes_to_num(uint8_t* src, size_t len) {
uint64_t num = 0;
- while (len--)
- {
+ while (len--) {
num = (num << 8) | (*src);
src++;
}
}
// RotateLeft - Ultralight, Desfire
-void rol(uint8_t *data, const size_t len){
+void rol(uint8_t *data, const size_t len) {
uint8_t first = data[0];
for (size_t i = 0; i < len-1; i++) {
data[i] = data[i+1];
// fast clock
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // timer disable
AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz)/32 -- tick=1.5mks
- AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR |
- AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET;
+ AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR |
+ AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET;
AT91C_BASE_TC0->TC_RA = 1;
AT91C_BASE_TC0->TC_RC = 0xBFFF + 1; // 0xC000
uint32_t RAMFUNC GetCountUS(){
//return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV / 15) * 10);
// By suggestion from PwPiwi, http://www.proxmark.org/forum/viewtopic.php?pid=17548#p17548
- return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3);
+ //return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV * 2) / 3);
+ return (AT91C_BASE_TC1->TC_CV * 0x8000) + ((AT91C_BASE_TC0->TC_CV << 1) / 3);
}
-static uint32_t GlobalUsCounter = 0;
+// static uint32_t GlobalUsCounter = 0;
-uint32_t RAMFUNC GetDeltaCountUS(){
- uint32_t g_cnt = GetCountUS();
- uint32_t g_res = g_cnt - GlobalUsCounter;
- GlobalUsCounter = g_cnt;
- return g_res;
-}
+// uint32_t RAMFUNC GetDeltaCountUS(){
+ // uint32_t g_cnt = GetCountUS();
+ // uint32_t g_res = g_cnt - GlobalUsCounter;
+ // GlobalUsCounter = g_cnt;
+ // return g_res;
+// }
// -------------------------------------------------------------------------
AT91C_BASE_TC2->TC_CMR = AT91C_TC_CLKS_XC2 // TC2 clock = XC2 clock = TIOA0
| AT91C_TC_WAVE // Waveform Mode
| AT91C_TC_WAVESEL_UP; // just count
-
+
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN; // enable TC0
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN; // enable TC1
AT91C_BASE_TC2->TC_CCR = AT91C_TC_CLKEN; // enable TC2
- //
- // synchronize the counter with the ssp_frame signal. Note: FPGA must be in any iso14446 mode, otherwise the frame signal would not be present
- //
+ // synchronize the counter with the ssp_frame signal.
+ // Note: FPGA must be in any iso14443 mode, otherwise the frame signal would not be present
while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME)); // wait for ssp_frame to go high (start of frame)
while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME); // wait for ssp_frame to be low
while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)); // wait for ssp_clk to go high
+
// note: up to now two ssp_clk rising edges have passed since the rising edge of ssp_frame
// it is now safe to assert a sync signal. This sets all timers to 0 on next active clock edge
AT91C_BASE_TCB->TCB_BCR = 1; // assert Sync (set all timers to 0 on next active clock edge)
// at the next (4th) ssp_clk rising edge, TC0 (the low word of our counter) will be reset. From now on,
// whenever the last three bits of our counter go 0, we can be sure to be in the middle of a frame transfer.
// (just started with the transfer of the 4th Bit).
- // The high word of the counter (TC2) will not reset until the low word (TC0) overflows. Therefore need to wait quite some time before
- // we can use the counter.
+
+ // The high word of the counter (TC2) will not reset until the low word (TC0) overflows.
+ // Therefore need to wait quite some time before we can use the counter.
while (AT91C_BASE_TC0->TC_CV < 0xFFF0);
}
uint32_t RAMFUNC GetCountSspClk(){
- uint32_t tmp_count;
- tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV;
- if ((tmp_count & 0x0000ffff) == 0) { //small chance that we may have missed an increment in TC2
+ uint32_t tmp_count = (AT91C_BASE_TC2->TC_CV << 16) | AT91C_BASE_TC0->TC_CV;
+ if ((tmp_count & 0x0000ffff) == 0) //small chance that we may have missed an increment in TC2
return (AT91C_BASE_TC2->TC_CV << 16);
- }
- else {
- return tmp_count;
- }
+ return tmp_count;
}
projects / proxmark3-svn / blobdiff