ADD: @marshmellow42 fudan detection in hf mfu

[proxmark3-svn] / armsrc / appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index 3e670f0be9ef004f8cbf668074f14a7b2b479623..9db69f0c837ec565a9449a5c9d6b0a48600492d3 100644 (file)
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -180,7 +180,7 @@ void MeasureAntennaTuning(void)
        int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0 
        int vLf125 = 0, vLf134 = 0, vHf = 0;    // in mV
 
        int i, adcval = 0, peak = 0, peakv = 0, peakf = 0; //ptr = 0 
        int vLf125 = 0, vLf134 = 0, vHf = 0;    // in mV
 

-       LED_B_ON();
+  LED_B_ON();

 
 /*
  * Sweeps the useful LF range of the proxmark from
 
 /*
  * Sweeps the useful LF range of the proxmark from


@@ -212,7 +212,7 @@ void MeasureAntennaTuning(void)
 
        for (i=18; i >= 0; i--) LF_Results[i] = 0;
        
 
        for (i=18; i >= 0; i--) LF_Results[i] = 0;
        

-       LED_A_ON();
+  LED_A_ON();

        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
        // Let the FPGA drive the high-frequency antenna around 13.56 MHz.
        FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);


@@ -221,9 +221,9 @@ void MeasureAntennaTuning(void)
 
        cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 
        cmd_send(CMD_MEASURED_ANTENNA_TUNING, vLf125 | (vLf134<<16), vHf, peakf | (peakv<<16), LF_Results, 256);
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);

-       LED_A_OFF();
-       LED_B_OFF();
-       return;
+  LED_A_OFF();
+  LED_B_OFF();
+  return;

 }
 
 void MeasureAntennaTuningHf(void)
 }
 
 void MeasureAntennaTuningHf(void)


@@ -250,55 +250,6 @@ void MeasureAntennaTuningHf(void)
 }
 
 
 }
 
 

-void SimulateTagHfListen(void)
-{
-       // ToDo: historically this used the free buffer, which was 2744 Bytes long. 
-       // There might be a better size to be defined:
-       #define HF_14B_SNOOP_BUFFER_SIZE 2744
-       uint8_t *dest = BigBuf_malloc(HF_14B_SNOOP_BUFFER_SIZE);
-       uint8_t v = 0;
-       int i;
-       int p = 0;
-
-       // We're using this mode just so that I can test it out; the simulated
-       // tag mode would work just as well and be simpler.
-       FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP);
-
-       // We need to listen to the high-frequency, peak-detected path.
-       SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
-       FpgaSetupSsc();
-
-       i = 0;
-       for(;;) {
-               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
-                       AT91C_BASE_SSC->SSC_THR = 0xff;
-               }
-               if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-                       uint8_t r = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-
-                       v <<= 1;
-                       if(r & 1) {
-                               v |= 1;
-                       }
-                       p++;
-
-                       if(p >= 8) {
-                               dest[i] = v;
-                               v = 0;
-                               p = 0;
-                               i++;
-
-                               if(i >= HF_14B_SNOOP_BUFFER_SIZE) {
-                                       break;
-                               }
-                       }
-               }
-       }
-       DbpString("simulate tag (now type bitsamples)");
-}
-

 void ReadMem(int addr)
 {
        const uint8_t *data = ((uint8_t *)addr);
 void ReadMem(int addr)
 {
        const uint8_t *data = ((uint8_t *)addr);


@@ -370,7 +321,7 @@ void SamyRun()
        for (;;)
        {
                usb_poll();
        for (;;)
        {
                usb_poll();

-    WDT_HIT();
+               WDT_HIT();

 
                // Was our button held down or pressed?
                int button_pressed = BUTTON_HELD(1000);
 
                // Was our button held down or pressed?
                int button_pressed = BUTTON_HELD(1000);


@@ -640,7 +591,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 {
        UsbCommand *c = (UsbCommand *)packet;
 
 {
        UsbCommand *c = (UsbCommand *)packet;
 

-//  Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]);
+  //Dbprintf("received %d bytes, with command: 0x%04x and args: %d %d %d",len,c->cmd,c->arg[0],c->arg[1],c->arg[2]);

   
        switch(c->cmd) {
 #ifdef WITH_LF
   
        switch(c->cmd) {
 #ifdef WITH_LF


@@ -648,7 +599,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        setSamplingConfig((sample_config *) c->d.asBytes);
                        break;
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        setSamplingConfig((sample_config *) c->d.asBytes);
                        break;
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_125K:

-                       cmd_send(CMD_ACK,SampleLF(),0,0,0,0);
+                       cmd_send(CMD_ACK,SampleLF(c->arg[0]),0,0,0,0);

                        break;
                case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K:
                        ModThenAcquireRawAdcSamples125k(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);


@@ -738,7 +689,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
                        break;
 #endif
                        ReaderHitag((hitag_function)c->arg[0],(hitag_data*)c->d.asBytes);
                        break;
 #endif

-            
+

 #ifdef WITH_ISO15693
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
                        AcquireRawAdcSamplesIso15693();
 #ifdef WITH_ISO15693
                case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693:
                        AcquireRawAdcSamplesIso15693();


@@ -782,20 +733,17 @@ void UsbPacketReceived(uint8_t *packet, int len)
 #endif
 
 #ifdef WITH_ISO14443b
 #endif
 
 #ifdef WITH_ISO14443b

-               case CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443:
-                       AcquireRawAdcSamplesIso14443(c->arg[0]);
-                       break;

                case CMD_READ_SRI512_TAG:
                case CMD_READ_SRI512_TAG:

-                       ReadSTMemoryIso14443(0x0F);
+                       ReadSTMemoryIso14443b(0x0F);

                        break;
                case CMD_READ_SRIX4K_TAG:
                        break;
                case CMD_READ_SRIX4K_TAG:

-                       ReadSTMemoryIso14443(0x7F);
+                       ReadSTMemoryIso14443b(0x7F);

                        break;
                        break;

-               case CMD_SNOOP_ISO_14443:
-                       SnoopIso14443();
+               case CMD_SNOOP_ISO_14443B:
+                       SnoopIso14443b();

                        break;
                        break;

-               case CMD_SIMULATE_TAG_ISO_14443:
-                       SimulateIso14443Tag();
+               case CMD_SIMULATE_TAG_ISO_14443B:
+                       SimulateIso14443bTag();

                        break;
                case CMD_ISO_14443B_COMMAND:
                        SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);
                        break;
                case CMD_ISO_14443B_COMMAND:
                        SendRawCommand14443B(c->arg[0],c->arg[1],c->arg[2],c->d.asBytes);


@@ -804,7 +752,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 
 #ifdef WITH_ISO14443a
                case CMD_SNOOP_ISO_14443a:
 
 #ifdef WITH_ISO14443a
                case CMD_SNOOP_ISO_14443a:

-                       SnoopIso14443a(c->arg[0]);
+                       SniffIso14443a(c->arg[0]);

                        break;
                case CMD_READER_ISO_14443a:
                        ReaderIso14443a(c);
                        break;
                case CMD_READER_ISO_14443a:
                        ReaderIso14443a(c);


@@ -824,19 +772,16 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFAREU_READBL:
                        MifareReadBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFAREU_READBL:

-                       MifareUReadBlock(c->arg[0],c->d.asBytes);
-                       break;
-               case CMD_MIFAREUC_AUTH1:
-                       MifareUC_Auth1(c->arg[0],c->d.asBytes);
+                       MifareUReadBlock(c->arg[0],c->arg[1], c->d.asBytes);

                        break;
                        break;

-               case CMD_MIFAREUC_AUTH2:
-                       MifareUC_Auth2(c->arg[0],c->d.asBytes);
+               case CMD_MIFAREUC_AUTH:
+                       MifareUC_Auth(c->arg[0],c->d.asBytes);

                        break;
                case CMD_MIFAREU_READCARD:
                        break;
                case CMD_MIFAREU_READCARD:

-                       MifareUReadCard(c->arg[0], c->arg[1], c->d.asBytes);
+                       MifareUReadCard(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);

                        break;
                        break;

-               case CMD_MIFAREUC_READCARD:
-                       MifareUReadCard(c->arg[0], c->arg[1], c->d.asBytes);
+               case CMD_MIFAREUC_SETPWD: 
+                       MifareUSetPwd(c->arg[0], c->d.asBytes);

                        break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_READSC:
                        MifareReadSector(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);


@@ -844,12 +789,12 @@ void UsbPacketReceived(uint8_t *packet, int len)
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_WRITEBL:
                        MifareWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;

-               case CMD_MIFAREU_WRITEBL_COMPAT:
-                       MifareUWriteBlock(c->arg[0], c->d.asBytes);
-                        break;
+               //case CMD_MIFAREU_WRITEBL_COMPAT:
+                       //MifareUWriteBlockCompat(c->arg[0], c->d.asBytes);
+                       //break;

                case CMD_MIFAREU_WRITEBL:
                case CMD_MIFAREU_WRITEBL:

-                        MifareUWriteBlock_Special(c->arg[0], c->d.asBytes);
-                        break;
+                       MifareUWriteBlock(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;

                case CMD_MIFARE_NESTED:
                        MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;
                case CMD_MIFARE_NESTED:
                        MifareNested(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
                        break;


@@ -893,6 +838,28 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        SniffMifare(c->arg[0]);
                        break;
 
                        SniffMifare(c->arg[0]);
                        break;
 

+               //mifare desfire
+               case CMD_MIFARE_DESFIRE_READBL: break;
+               case CMD_MIFARE_DESFIRE_WRITEBL: break;
+               case CMD_MIFARE_DESFIRE_AUTH1:
+                       MifareDES_Auth1(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes);
+                       break;
+               case CMD_MIFARE_DESFIRE_AUTH2:
+                       //MifareDES_Auth2(c->arg[0],c->d.asBytes);
+                       break;
+               case CMD_MIFARE_DES_READER:
+                       //readermifaredes(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;
+               case CMD_MIFARE_DESFIRE_INFO:
+                       MifareDesfireGetInformation();
+                       break;
+               case CMD_MIFARE_DESFIRE:
+                       MifareSendCommand(c->arg[0], c->arg[1], c->d.asBytes);
+                       break;
+
+               case CMD_MIFARE_COLLECT_NONCES:
+                       MifareCollectNonces(c->arg[0], c->arg[1]);
+                       break;

 #endif
 
 #ifdef WITH_ICLASS
 #endif
 
 #ifdef WITH_ICLASS


@@ -907,17 +874,13 @@ void UsbPacketReceived(uint8_t *packet, int len)
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS_REPLAY:
                        ReaderIClass(c->arg[0]);
                        break;
                case CMD_READER_ICLASS_REPLAY:

-                   ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+                       ReaderIClass_Replay(c->arg[0], c->d.asBytes);

                        break;
        case CMD_ICLASS_EML_MEMSET:
                        emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
                        break;
 #endif
 
                        break;
        case CMD_ICLASS_EML_MEMSET:
                        emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
                        break;
 #endif
 

-               case CMD_SIMULATE_TAG_HF_LISTEN:
-                       SimulateTagHfListen();
-                       break;
-

                case CMD_BUFF_CLEAR:
                        BigBuf_Clear();
                        break;
                case CMD_BUFF_CLEAR:
                        BigBuf_Clear();
                        break;


@@ -1040,7 +1003,7 @@ void  __attribute__((noreturn)) AppMain(void)
        LED_A_OFF();
 
        // Init USB device
        LED_A_OFF();
 
        // Init USB device

-  usb_enable();
+       usb_enable();

 
        // The FPGA gets its clock from us from PCK0 output, so set that up.
        AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;
 
        // The FPGA gets its clock from us from PCK0 output, so set that up.
        AT91C_BASE_PIOA->PIO_BSR = GPIO_PCK0;


@@ -1070,12 +1033,12 @@ void  __attribute__((noreturn)) AppMain(void)
        size_t rx_len;
   
        for(;;) {
        size_t rx_len;
   
        for(;;) {

-    if (usb_poll()) {
-      rx_len = usb_read(rx,sizeof(UsbCommand));
-      if (rx_len) {
-        UsbPacketReceived(rx,rx_len);
-      }
-    }
+               if (usb_poll()) {
+                       rx_len = usb_read(rx,sizeof(UsbCommand));
+                       if (rx_len) {
+                               UsbPacketReceived(rx,rx_len);
+                       }
+               }

                WDT_HIT();
 
 #ifdef WITH_LF
                WDT_HIT();
 
 #ifdef WITH_LF