#include "util.h"
#include "string.h"
#include "cmd.h"
-
#include "iso14443crc.h"
#include "iso14443a.h"
-#include "crapto1.h"
+#include "crapto1/crapto1.h"
#include "mifareutil.h"
#include "BigBuf.h"
+#include "protocols.h"
+#include "parity.h"
+
+
static uint32_t iso14a_timeout;
int rsamples = 0;
uint8_t trigger = 0;
#define SEC_Y 0x00
#define SEC_Z 0xc0
-const uint8_t OddByteParity[256] = {
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
-};
-
void iso14a_set_trigger(bool enable) {
trigger = enable;
// Generate the parity value for a byte sequence
//
//-----------------------------------------------------------------------------
-byte_t oddparity (const byte_t bt)
-{
- return OddByteParity[bt];
-}
-
void GetParity(const uint8_t *pbtCmd, uint16_t iLen, uint8_t *par)
{
uint16_t paritybit_cnt = 0;
for (uint16_t i = 0; i < iLen; i++) {
// Generate the parity bits
- parityBits |= ((OddByteParity[pbtCmd[i]]) << (7-paritybit_cnt));
+ parityBits |= ((oddparity8(pbtCmd[i])) << (7-paritybit_cnt));
if (paritybit_cnt == 7) {
par[paritybyte_cnt] = parityBits; // save 8 Bits parity
parityBits = 0; // and advance to next Parity Byte
ComputeCrc14443(CRC_14443_A,data,len,data+len,data+len+1);
}
+void AppendCrc14443b(uint8_t* data, int len)
+{
+ ComputeCrc14443(CRC_14443_B,data,len,data+len,data+len+1);
+}
+
+
//=============================================================================
// ISO 14443 Type A - Miller decoder
//=============================================================================
static tUart Uart;
// Lookup-Table to decide if 4 raw bits are a modulation.
-// We accept two or three consecutive "0" in any position with the rest "1"
+// We accept the following:
+// 0001 - a 3 tick wide pause
+// 0011 - a 2 tick wide pause, or a three tick wide pause shifted left
+// 0111 - a 2 tick wide pause shifted left
+// 1001 - a 2 tick wide pause shifted right
const bool Mod_Miller_LUT[] = {
- TRUE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, FALSE,
- TRUE, TRUE, FALSE, FALSE, TRUE, FALSE, FALSE, FALSE
+ FALSE, TRUE, FALSE, TRUE, FALSE, FALSE, FALSE, TRUE,
+ FALSE, TRUE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE
};
-#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x00F0) >> 4])
-#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x000F)])
+#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x000000F0) >> 4])
+#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x0000000F)])
void UartReset()
{
Uart.parityLen = 0; // number of decoded parity bytes
Uart.shiftReg = 0; // shiftreg to hold decoded data bits
Uart.parityBits = 0; // holds 8 parity bits
- Uart.twoBits = 0x0000; // buffer for 2 Bits
- Uart.highCnt = 0;
Uart.startTime = 0;
Uart.endTime = 0;
}
{
Uart.output = data;
Uart.parity = parity;
+ Uart.fourBits = 0x00000000; // clear the buffer for 4 Bits
UartReset();
}
static RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time)
{
- Uart.twoBits = (Uart.twoBits << 8) | bit;
+ Uart.fourBits = (Uart.fourBits << 8) | bit;
if (Uart.state == STATE_UNSYNCD) { // not yet synced
- if (Uart.highCnt < 2) { // wait for a stable unmodulated signal
- if (Uart.twoBits == 0xffff) {
- Uart.highCnt++;
- } else {
- Uart.highCnt = 0;
- }
- } else {
- Uart.syncBit = 0xFFFF; // not set
- // we look for a ...1111111100x11111xxxxxx pattern (the start bit)
- if ((Uart.twoBits & 0xDF00) == 0x1F00) Uart.syncBit = 8; // mask is 11x11111 xxxxxxxx,
- // check for 00x11111 xxxxxxxx
- else if ((Uart.twoBits & 0xEF80) == 0x8F80) Uart.syncBit = 7; // both masks shifted right one bit, left padded with '1'
- else if ((Uart.twoBits & 0xF7C0) == 0xC7C0) Uart.syncBit = 6; // ...
- else if ((Uart.twoBits & 0xFBE0) == 0xE3E0) Uart.syncBit = 5;
- else if ((Uart.twoBits & 0xFDF0) == 0xF1F0) Uart.syncBit = 4;
- else if ((Uart.twoBits & 0xFEF8) == 0xF8F8) Uart.syncBit = 3;
- else if ((Uart.twoBits & 0xFF7C) == 0xFC7C) Uart.syncBit = 2;
- else if ((Uart.twoBits & 0xFFBE) == 0xFE3E) Uart.syncBit = 1;
- if (Uart.syncBit != 0xFFFF) { // found a sync bit
- Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8);
- Uart.startTime -= Uart.syncBit;
- Uart.endTime = Uart.startTime;
- Uart.state = STATE_START_OF_COMMUNICATION;
- }
+ Uart.syncBit = 9999; // not set
+ // The start bit is one ore more Sequence Y followed by a Sequence Z (... 11111111 00x11111). We need to distinguish from
+ // Sequence X followed by Sequence Y followed by Sequence Z (111100x1 11111111 00x11111)
+ // we therefore look for a ...xx11111111111100x11111xxxxxx... pattern
+ // (12 '1's followed by 2 '0's, eventually followed by another '0', followed by 5 '1's)
+ #define ISO14443A_STARTBIT_MASK 0x07FFEF80 // mask is 00000111 11111111 11101111 10000000
+ #define ISO14443A_STARTBIT_PATTERN 0x07FF8F80 // pattern is 00000111 11111111 10001111 10000000
+ if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 0)) == ISO14443A_STARTBIT_PATTERN >> 0) Uart.syncBit = 7;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 1)) == ISO14443A_STARTBIT_PATTERN >> 1) Uart.syncBit = 6;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 2)) == ISO14443A_STARTBIT_PATTERN >> 2) Uart.syncBit = 5;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 3)) == ISO14443A_STARTBIT_PATTERN >> 3) Uart.syncBit = 4;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 4)) == ISO14443A_STARTBIT_PATTERN >> 4) Uart.syncBit = 3;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 5)) == ISO14443A_STARTBIT_PATTERN >> 5) Uart.syncBit = 2;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 6)) == ISO14443A_STARTBIT_PATTERN >> 6) Uart.syncBit = 1;
+ else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 7)) == ISO14443A_STARTBIT_PATTERN >> 7) Uart.syncBit = 0;
+
+ if (Uart.syncBit != 9999) { // found a sync bit
+ Uart.startTime = non_real_time?non_real_time:(GetCountSspClk() & 0xfffffff8);
+ Uart.startTime -= Uart.syncBit;
+ Uart.endTime = Uart.startTime;
+ Uart.state = STATE_START_OF_COMMUNICATION;
}
} else {
- if (IsMillerModulationNibble1(Uart.twoBits >> Uart.syncBit)) {
- if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation in both halves - error
+ if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) {
+ if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error
UartReset();
} else { // Modulation in first half = Sequence Z = logic "0"
if (Uart.state == STATE_MILLER_X) { // error - must not follow after X
}
}
} else {
- if (IsMillerModulationNibble2(Uart.twoBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
+ if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
Uart.bitCount++;
Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg
Uart.state = STATE_MILLER_X;
return TRUE; // we are finished with decoding the raw data sequence
} else {
UartReset(); // Nothing received - start over
- Uart.highCnt = 1;
}
}
if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC
UartReset();
- Uart.highCnt = 1;
} else { // a logic "0"
Uart.bitCount++;
Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg
// And ready to receive another response.
DemodReset();
+ // And reset the Miller decoder including itS (now outdated) input buffer
+ UartInit(receivedCmd, receivedCmdPar);
+
LED_C_OFF();
}
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
}
// Only transmit parity bit if we transmitted a complete byte
- if (j == 8) {
+ if (j == 8 && parity != NULL) {
// Get the parity bit
if (parity[i>>3] & (0x80 >> (i&0x0007))) {
// Sequence X
}
}
+
void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing)
{
CodeIso14443aBitsAsReaderPar(frame, bits, par);
}
}
+
void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *timing)
{
ReaderTransmitBitsPar(frame, len*8, par, timing);
}
+
void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
ReaderTransmitBitsPar(frame, len, par, timing);
}
+
void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing)
{
// Generate parity and redirect
memset(uid_ptr,0,10);
}
+ // check for proprietary anticollision:
+ if ((resp[0] & 0x1F) == 0) {
+ return 3;
+ }
+
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
// which case we need to make a cascade 2 request and select - this is a long UID
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
if(param & ISO14A_RAW) {
if(param & ISO14A_APPEND_CRC) {
- AppendCrc14443a(cmd,len);
+ if(param & ISO14A_TOPAZMODE) {
+ AppendCrc14443b(cmd,len);
+ } else {
+ AppendCrc14443a(cmd,len);
+ }
len += 2;
if (lenbits) lenbits += 16;
}
- if(lenbits>0) {
- GetParity(cmd, lenbits/8, par);
- ReaderTransmitBitsPar(cmd, lenbits, par, NULL);
- } else {
- ReaderTransmit(cmd,len, NULL);
+ if(lenbits>0) { // want to send a specific number of bits (e.g. short commands)
+ if(param & ISO14A_TOPAZMODE) {
+ int bits_to_send = lenbits;
+ uint16_t i = 0;
+ ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 7), NULL, NULL); // first byte is always short (7bits) and no parity
+ bits_to_send -= 7;
+ while (bits_to_send > 0) {
+ ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 8), NULL, NULL); // following bytes are 8 bit and no parity
+ bits_to_send -= 8;
+ }
+ } else {
+ GetParity(cmd, lenbits/8, par);
+ ReaderTransmitBitsPar(cmd, lenbits, par, NULL); // bytes are 8 bit with odd parity
+ }
+ } else { // want to send complete bytes only
+ if(param & ISO14A_TOPAZMODE) {
+ uint16_t i = 0;
+ ReaderTransmitBitsPar(&cmd[i++], 7, NULL, NULL); // first byte: 7 bits, no paritiy
+ while (i < len) {
+ ReaderTransmitBitsPar(&cmd[i++], 8, NULL, NULL); // following bytes: 8 bits, no paritiy
+ }
+ } else {
+ ReaderTransmit(cmd,len, NULL); // 8 bits, odd parity
+ }
}
arg0 = ReaderReceive(buf, par);
cmd_send(CMD_ACK,arg0,0,0,buf,sizeof(buf));
#define PRNG_SEQUENCE_LENGTH (1 << 16);
static uint32_t sync_time;
- static uint32_t sync_cycles;
+ static int32_t sync_cycles;
int catch_up_cycles = 0;
int last_catch_up = 0;
+ uint16_t elapsed_prng_sequences;
uint16_t consecutive_resyncs = 0;
int isOK = 0;
sync_time = GetCountSspClk() & 0xfffffff8;
sync_cycles = PRNG_SEQUENCE_LENGTH; // theory: Mifare Classic's random generator repeats every 2^16 cycles (and so do the tag nonces).
nt_attacked = 0;
- nt = 0;
par[0] = 0;
}
else {
#define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up.
- #define MAX_SYNC_TRIES 16
+ #define MAX_SYNC_TRIES 32
+ #define NUM_DEBUG_INFOS 8 // per strategy
+ #define MAX_STRATEGY 3
uint16_t unexpected_random = 0;
uint16_t sync_tries = 0;
int16_t debug_info_nr = -1;
- uint32_t debug_info[MAX_SYNC_TRIES];
+ uint16_t strategy = 0;
+ int32_t debug_info[MAX_STRATEGY][NUM_DEBUG_INFOS];
+ uint32_t select_time;
+ uint32_t halt_time;
for(uint16_t i = 0; TRUE; i++) {
break;
}
+ if (strategy == 2) {
+ // test with additional hlt command
+ halt_time = 0;
+ int len = mifare_sendcmd_short(NULL, false, 0x50, 0x00, receivedAnswer, receivedAnswerPar, &halt_time);
+ if (len && MF_DBGLEVEL >= 3) {
+ Dbprintf("Unexpected response of %d bytes to hlt command (additional debugging).", len);
+ }
+ }
+
+ if (strategy == 3) {
+ // test with FPGA power off/on
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+ SpinDelay(200);
+ iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
+ SpinDelay(100);
+ }
+
if(!iso14443a_select_card(uid, NULL, &cuid)) {
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card");
continue;
}
+ select_time = GetCountSspClk();
+ elapsed_prng_sequences = 1;
if (debug_info_nr == -1) {
sync_time = (sync_time & 0xfffffff8) + sync_cycles + catch_up_cycles;
catch_up_cycles = 0;
// if we missed the sync time already, advance to the next nonce repeat
while(GetCountSspClk() > sync_time) {
+ elapsed_prng_sequences++;
sync_time = (sync_time & 0xfffffff8) + sync_cycles;
}
// Transmit MIFARE_CLASSIC_AUTH at synctime. Should result in returning the same tag nonce (== nt_attacked)
ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
} else {
- ReaderTransmit(mf_auth, sizeof(mf_auth), NULL);
+ // collect some information on tag nonces for debugging:
+ #define DEBUG_FIXED_SYNC_CYCLES PRNG_SEQUENCE_LENGTH
+ if (strategy == 0) {
+ // nonce distances at fixed time after card select:
+ sync_time = select_time + DEBUG_FIXED_SYNC_CYCLES;
+ } else if (strategy == 1) {
+ // nonce distances at fixed time between authentications:
+ sync_time = sync_time + DEBUG_FIXED_SYNC_CYCLES;
+ } else if (strategy == 2) {
+ // nonce distances at fixed time after halt:
+ sync_time = halt_time + DEBUG_FIXED_SYNC_CYCLES;
+ } else {
+ // nonce_distances at fixed time after power on
+ sync_time = DEBUG_FIXED_SYNC_CYCLES;
+ }
+ ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
}
// Receive the (4 Byte) "random" nonce
} else {
if (nt_distance == -99999) { // invalid nonce received
unexpected_random++;
- if (!nt_attacked && unexpected_random > MAX_UNEXPECTED_RANDOM) {
+ if (unexpected_random > MAX_UNEXPECTED_RANDOM) {
isOK = -3; // Card has an unpredictable PRNG. Give up
break;
} else {
}
}
if (++sync_tries > MAX_SYNC_TRIES) {
- if (sync_tries > 2 * MAX_SYNC_TRIES) {
+ if (strategy > MAX_STRATEGY || MF_DBGLEVEL < 3) {
isOK = -4; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
break;
} else { // continue for a while, just to collect some debug info
- debug_info[++debug_info_nr] = nt_distance;
+ debug_info[strategy][debug_info_nr] = nt_distance;
+ debug_info_nr++;
+ if (debug_info_nr == NUM_DEBUG_INFOS) {
+ strategy++;
+ debug_info_nr = 0;
+ }
continue;
}
}
- sync_cycles = (sync_cycles - nt_distance);
+ sync_cycles = (sync_cycles - nt_distance/elapsed_prng_sequences);
if (sync_cycles <= 0) {
sync_cycles += PRNG_SEQUENCE_LENGTH;
}
if (MF_DBGLEVEL >= 3) {
- Dbprintf("calibrating in cycle %d. nt_distance=%d, Sync_cycles: %d\n", i, nt_distance, sync_cycles);
+ Dbprintf("calibrating in cycle %d. nt_distance=%d, elapsed_prng_sequences=%d, new sync_cycles: %d\n", i, nt_distance, elapsed_prng_sequences, sync_cycles);
}
continue;
}
catch_up_cycles = 0;
continue;
}
+ catch_up_cycles /= elapsed_prng_sequences;
if (catch_up_cycles == last_catch_up) {
consecutive_resyncs++;
}
else {
sync_cycles = sync_cycles + catch_up_cycles;
if (MF_DBGLEVEL >= 3) Dbprintf("Lost sync in cycle %d for the fourth time consecutively (nt_distance = %d). Adjusting sync_cycles to %d.\n", i, -catch_up_cycles, sync_cycles);
+ last_catch_up = 0;
+ catch_up_cycles = 0;
+ consecutive_resyncs = 0;
}
continue;
}
consecutive_resyncs = 0;
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
- if (ReaderReceive(receivedAnswer, receivedAnswerPar))
- {
+ if (ReaderReceive(receivedAnswer, receivedAnswerPar)) {
catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer
- if (nt_diff == 0)
- {
+ if (nt_diff == 0) {
par_low = par[0] & 0xE0; // there is no need to check all parities for other nt_diff. Parity Bits for mf_nr_ar[0..2] won't change
}
if (isOK == -4) {
if (MF_DBGLEVEL >= 3) {
- for(uint16_t i = 0; i < MAX_SYNC_TRIES; i++) {
- Dbprintf("collected debug info[%d] = %d\n", i, debug_info[i]);
+ for (uint16_t i = 0; i <= MAX_STRATEGY; i++) {
+ for(uint16_t j = 0; j < NUM_DEBUG_INFOS; j++) {
+ Dbprintf("collected debug info[%d][%d] = %d", i, j, debug_info[i][j]);
+ }
}
}
}
set_tracing(FALSE);
}
+typedef struct {
+ uint32_t cuid;
+ uint8_t sector;
+ uint8_t keytype;
+ uint32_t nonce;
+ uint32_t ar;
+ uint32_t nr;
+ uint32_t nonce2;
+ uint32_t ar2;
+ uint32_t nr2;
+} nonces_t;
+
/**
*MIFARE 1K simulate.
*
*@param flags :
* FLAG_INTERACTIVE - In interactive mode, we are expected to finish the operation with an ACK
- * 4B_FLAG_UID_IN_DATA - means that there is a 4-byte UID in the data-section, we're expected to use that
- * 7B_FLAG_UID_IN_DATA - means that there is a 7-byte UID in the data-section, we're expected to use that
+ * FLAG_4B_UID_IN_DATA - means that there is a 4-byte UID in the data-section, we're expected to use that
+ * FLAG_7B_UID_IN_DATA - means that there is a 7-byte UID in the data-section, we're expected to use that
+ * FLAG_10B_UID_IN_DATA - use 10-byte UID in the data-section not finished
* FLAG_NR_AR_ATTACK - means we should collect NR_AR responses for bruteforcing later
- *@param exitAfterNReads, exit simulation after n blocks have been read, 0 is inifite
+ * FLAG_RANDOM_NONCE - means we should generate some pseudo-random nonce data (only allows moebius attack)
+ *@param exitAfterNReads, exit simulation after n blocks have been read, 0 is infinite ...
+ * (unless reader attack mode enabled then it runs util it gets enough nonces to recover all keys attmpted)
*/
void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *datain)
{
int cardSTATE = MFEMUL_NOFIELD;
- int _7BUID = 0;
+ int _UID_LEN = 0; // 4, 7, 10
int vHf = 0; // in mV
int res;
uint32_t selTimer = 0;
uint8_t response[MAX_MIFARE_FRAME_SIZE];
uint8_t response_par[MAX_MIFARE_PARITY_SIZE];
- uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
+ uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!!
- uint8_t rSAK[] = {0x08, 0xb6, 0xdd};
- uint8_t rSAK1[] = {0x04, 0xda, 0x17};
+ uint8_t rUIDBCC3[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
+
+ uint8_t rSAKfinal[]= {0x08, 0xb6, 0xdd}; // mifare 1k indicated
+ uint8_t rSAK1[] = {0x04, 0xda, 0x17}; // indicate UID not finished
uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04};
uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00};
- //Here, we collect UID,NT,AR,NR,UID2,NT2,AR2,NR2
- // This can be used in a reader-only attack.
- // (it can also be retrieved via 'hf 14a list', but hey...
- uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0};
- uint8_t ar_nr_collected = 0;
+ //Here, we collect UID,sector,keytype,NT,AR,NR,NT2,AR2,NR2
+ // This will be used in the reader-only attack.
+
+ //allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys
+ #define ATTACK_KEY_COUNT 8 // keep same as define in cmdhfmf.c -> readerAttack()
+ nonces_t ar_nr_resp[ATTACK_KEY_COUNT*2]; //*2 for 2 separate attack types (nml, moebius)
+ memset(ar_nr_resp, 0x00, sizeof(ar_nr_resp));
+
+ uint8_t ar_nr_collected[ATTACK_KEY_COUNT*2]; //*2 for 2nd attack type (moebius)
+ memset(ar_nr_collected, 0x00, sizeof(ar_nr_collected));
+ uint8_t nonce1_count = 0;
+ uint8_t nonce2_count = 0;
+ uint8_t moebius_n_count = 0;
+ bool gettingMoebius = false;
+ uint8_t mM = 0; //moebius_modifier for collection storage
// Authenticate response - nonce
- uint32_t nonce = bytes_to_num(rAUTH_NT, 4);
+ uint32_t nonce;
+ if (flags & FLAG_RANDOM_NONCE) {
+ nonce = prand();
+ } else {
+ nonce = bytes_to_num(rAUTH_NT, 4);
+ }
//-- Determine the UID
// Can be set from emulator memory, incoming data
// 4B uid comes from data-portion of packet
memcpy(rUIDBCC1,datain,4);
rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
-
+ _UID_LEN = 4;
} else if (flags & FLAG_7B_UID_IN_DATA) {
// 7B uid comes from data-portion of packet
memcpy(&rUIDBCC1[1],datain,3);
memcpy(rUIDBCC2, datain+3, 4);
- _7BUID = true;
+ _UID_LEN = 7;
+ } else if (flags & FLAG_10B_UID_IN_DATA) {
+ memcpy(&rUIDBCC1[1], datain, 3);
+ memcpy(&rUIDBCC2[1], datain+3, 3);
+ memcpy( rUIDBCC3, datain+6, 4);
+ _UID_LEN = 10;
} else {
- // get UID from emul memory
+ // get UID from emul memory - guess at length
emlGetMemBt(receivedCmd, 7, 1);
- _7BUID = !(receivedCmd[0] == 0x00);
- if (!_7BUID) { // ---------- 4BUID
+ if (receivedCmd[0] == 0x00) { // ---------- 4BUID
emlGetMemBt(rUIDBCC1, 0, 4);
+ _UID_LEN = 4;
} else { // ---------- 7BUID
emlGetMemBt(&rUIDBCC1[1], 0, 3);
emlGetMemBt(rUIDBCC2, 3, 4);
+ _UID_LEN = 7;
}
}
- /*
- * Regardless of what method was used to set the UID, set fifth byte and modify
- * the ATQA for 4 or 7-byte UID
- */
- rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
- if (_7BUID) {
- rATQA[0] = 0x44;
- rUIDBCC1[0] = 0x88;
- rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
- rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
- }
-
- if (MF_DBGLEVEL >= 1) {
- if (!_7BUID) {
- Dbprintf("4B UID: %02x%02x%02x%02x",
- rUIDBCC1[0], rUIDBCC1[1], rUIDBCC1[2], rUIDBCC1[3]);
- } else {
- Dbprintf("7B UID: (%02x)%02x%02x%02x%02x%02x%02x%02x",
- rUIDBCC1[0], rUIDBCC1[1], rUIDBCC1[2], rUIDBCC1[3],
- rUIDBCC2[0], rUIDBCC2[1] ,rUIDBCC2[2], rUIDBCC2[3]);
- }
+ switch (_UID_LEN) {
+ case 4:
+ // save CUID
+ cuid = bytes_to_num(rUIDBCC1, 4);
+ // BCC
+ rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
+ if (MF_DBGLEVEL >= 2) {
+ Dbprintf("4B UID: %02x%02x%02x%02x",
+ rUIDBCC1[0],
+ rUIDBCC1[1],
+ rUIDBCC1[2],
+ rUIDBCC1[3]
+ );
+ }
+ break;
+ case 7:
+ rATQA[0] |= 0x40;
+ // save CUID
+ cuid = bytes_to_num(rUIDBCC2, 4);
+ // CascadeTag, CT
+ rUIDBCC1[0] = 0x88;
+ // BCC
+ rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
+ rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
+ if (MF_DBGLEVEL >= 2) {
+ Dbprintf("7B UID: %02x %02x %02x %02x %02x %02x %02x",
+ rUIDBCC1[1],
+ rUIDBCC1[2],
+ rUIDBCC1[3],
+ rUIDBCC2[0],
+ rUIDBCC2[1],
+ rUIDBCC2[2],
+ rUIDBCC2[3]
+ );
+ }
+ break;
+ case 10:
+ rATQA[0] |= 0x80;
+ //sak_10[0] &= 0xFB;
+ // save CUID
+ cuid = bytes_to_num(rUIDBCC3, 4);
+ // CascadeTag, CT
+ rUIDBCC1[0] = 0x88;
+ rUIDBCC2[0] = 0x88;
+ // BCC
+ rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
+ rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
+ rUIDBCC3[4] = rUIDBCC3[0] ^ rUIDBCC3[1] ^ rUIDBCC3[2] ^ rUIDBCC3[3];
+
+ if (MF_DBGLEVEL >= 2) {
+ Dbprintf("10B UID: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+ rUIDBCC1[1],
+ rUIDBCC1[2],
+ rUIDBCC1[3],
+ rUIDBCC2[1],
+ rUIDBCC2[2],
+ rUIDBCC2[3],
+ rUIDBCC3[0],
+ rUIDBCC3[1],
+ rUIDBCC3[2],
+ rUIDBCC3[3]
+ );
+ }
+ break;
+ default:
+ break;
}
// We need to listen to the high-frequency, peak-detected path.
clear_trace();
set_tracing(TRUE);
-
bool finished = FALSE;
- while (!BUTTON_PRESS() && !finished) {
+ bool button_pushed = BUTTON_PRESS();
+ while (!button_pushed && !finished && !usb_poll_validate_length()) {
WDT_HIT();
// find reader field
cardSTATE_TO_IDLE();
LED_A_ON();
}
- }
- if(cardSTATE == MFEMUL_NOFIELD) continue;
+ }
+ if (cardSTATE == MFEMUL_NOFIELD) continue;
//Now, get data
-
res = EmGetCmd(receivedCmd, &len, receivedCmd_par);
if (res == 2) { //Field is off!
cardSTATE = MFEMUL_NOFIELD;
} else if (res == 1) {
break; //return value 1 means button press
}
-
+
// REQ or WUP request in ANY state and WUP in HALTED state
- if (len == 1 && ((receivedCmd[0] == 0x26 && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == 0x52)) {
+ if (len == 1 && ((receivedCmd[0] == ISO14443A_CMD_REQA && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == ISO14443A_CMD_WUPA)) {
selTimer = GetTickCount();
- EmSendCmdEx(rATQA, sizeof(rATQA), (receivedCmd[0] == 0x52));
+ EmSendCmdEx(rATQA, sizeof(rATQA), (receivedCmd[0] == ISO14443A_CMD_WUPA));
cardSTATE = MFEMUL_SELECT1;
// init crypto block
LED_C_OFF();
crypto1_destroy(pcs);
cardAUTHKEY = 0xff;
+ if (flags & FLAG_RANDOM_NONCE) {
+ nonce = prand();
+ }
continue;
}
break;
}
case MFEMUL_SELECT1:{
- // select all
- if (len == 2 && (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x20)) {
+ // select all - 0x93 0x20
+ if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && receivedCmd[1] == 0x20)) {
if (MF_DBGLEVEL >= 4) Dbprintf("SELECT ALL received");
EmSendCmd(rUIDBCC1, sizeof(rUIDBCC1));
break;
}
- if (MF_DBGLEVEL >= 4 && len == 9 && receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 )
- {
- Dbprintf("SELECT %02x%02x%02x%02x received",receivedCmd[2],receivedCmd[3],receivedCmd[4],receivedCmd[5]);
+ // select card - 0x93 0x70 ...
+ if (len == 9 &&
+ (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) {
+ if (MF_DBGLEVEL >= 4)
+ Dbprintf("SELECT %02x%02x%02x%02x received",receivedCmd[2],receivedCmd[3],receivedCmd[4],receivedCmd[5]);
+
+ switch(_UID_LEN) {
+ case 4:
+ cardSTATE = MFEMUL_WORK;
+ LED_B_ON();
+ if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol1 time: %d", GetTickCount() - selTimer);
+ EmSendCmd(rSAKfinal, sizeof(rSAKfinal));
+ break;
+ case 7:
+ cardSTATE = MFEMUL_SELECT2;
+ EmSendCmd(rSAK1, sizeof(rSAK1));
+ break;
+ case 10:
+ cardSTATE = MFEMUL_SELECT2;
+ EmSendCmd(rSAK1, sizeof(rSAK1));
+ break;
+ default:break;
+ }
+ } else {
+ cardSTATE_TO_IDLE();
+ }
+ break;
+ }
+ case MFEMUL_SELECT3:{
+ if (!len) {
+ LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
+ break;
}
- // select card
+ // select all cl3 - 0x97 0x20
+ if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && receivedCmd[1] == 0x20)) {
+ EmSendCmd(rUIDBCC3, sizeof(rUIDBCC3));
+ break;
+ }
+ // select card cl3 - 0x97 0x70
if (len == 9 &&
- (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) {
- EmSendCmd(_7BUID?rSAK1:rSAK, _7BUID?sizeof(rSAK1):sizeof(rSAK));
- cuid = bytes_to_num(rUIDBCC1, 4);
- if (!_7BUID) {
- cardSTATE = MFEMUL_WORK;
- LED_B_ON();
- if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol1 time: %d", GetTickCount() - selTimer);
- break;
- } else {
- cardSTATE = MFEMUL_SELECT2;
- }
+ (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 &&
+ receivedCmd[1] == 0x70 &&
+ memcmp(&receivedCmd[2], rUIDBCC3, 4) == 0) ) {
+
+ EmSendCmd(rSAKfinal, sizeof(rSAKfinal));
+ cardSTATE = MFEMUL_WORK;
+ LED_B_ON();
+ if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol3 time: %d", GetTickCount() - selTimer);
+ break;
}
+ cardSTATE_TO_IDLE();
break;
}
case MFEMUL_AUTH1:{
- if( len != 8)
- {
+ if( len != 8) {
cardSTATE_TO_IDLE();
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
}
- uint32_t ar = bytes_to_num(receivedCmd, 4);
- uint32_t nr = bytes_to_num(&receivedCmd[4], 4);
-
- //Collect AR/NR
- if(ar_nr_collected < 2){
- if(ar_nr_responses[2] != ar)
- {// Avoid duplicates... probably not necessary, ar should vary.
- ar_nr_responses[ar_nr_collected*4] = cuid;
- ar_nr_responses[ar_nr_collected*4+1] = nonce;
- ar_nr_responses[ar_nr_collected*4+2] = ar;
- ar_nr_responses[ar_nr_collected*4+3] = nr;
- ar_nr_collected++;
+ uint32_t nr = bytes_to_num(receivedCmd, 4);
+ uint32_t ar = bytes_to_num(&receivedCmd[4], 4);
+
+ // Collect AR/NR per keytype & sector
+ if(flags & FLAG_NR_AR_ATTACK) {
+ for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
+ if ( ar_nr_collected[i+mM]==0 || ((cardAUTHSC == ar_nr_resp[i+mM].sector) && (cardAUTHKEY == ar_nr_resp[i+mM].keytype) && (ar_nr_collected[i+mM] > 0)) ) {
+ // if first auth for sector, or matches sector and keytype of previous auth
+ if (ar_nr_collected[i+mM] < 2) {
+ // if we haven't already collected 2 nonces for this sector
+ if (ar_nr_resp[ar_nr_collected[i+mM]].ar != ar) {
+ // Avoid duplicates... probably not necessary, ar should vary.
+ if (ar_nr_collected[i+mM]==0) {
+ // first nonce collect
+ ar_nr_resp[i+mM].cuid = cuid;
+ ar_nr_resp[i+mM].sector = cardAUTHSC;
+ ar_nr_resp[i+mM].keytype = cardAUTHKEY;
+ ar_nr_resp[i+mM].nonce = nonce;
+ ar_nr_resp[i+mM].nr = nr;
+ ar_nr_resp[i+mM].ar = ar;
+ nonce1_count++;
+ // add this nonce to first moebius nonce
+ ar_nr_resp[i+ATTACK_KEY_COUNT].cuid = cuid;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].sector = cardAUTHSC;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].keytype = cardAUTHKEY;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].nonce = nonce;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].nr = nr;
+ ar_nr_resp[i+ATTACK_KEY_COUNT].ar = ar;
+ ar_nr_collected[i+ATTACK_KEY_COUNT]++;
+ } else { // second nonce collect (std and moebius)
+ ar_nr_resp[i+mM].nonce2 = nonce;
+ ar_nr_resp[i+mM].nr2 = nr;
+ ar_nr_resp[i+mM].ar2 = ar;
+ if (!gettingMoebius) {
+ nonce2_count++;
+ // check if this was the last second nonce we need for std attack
+ if ( nonce2_count == nonce1_count ) {
+ // done collecting std test switch to moebius
+ // first finish incrementing last sample
+ ar_nr_collected[i+mM]++;
+ // switch to moebius collection
+ gettingMoebius = true;
+ mM = ATTACK_KEY_COUNT;
+ if (flags & FLAG_RANDOM_NONCE) {
+ nonce = prand();
+ } else {
+ nonce = nonce*7;
+ }
+ break;
+ }
+ } else {
+ moebius_n_count++;
+ // if we've collected all the nonces we need - finish.
+ if (nonce1_count == moebius_n_count) finished = true;
+ }
+ }
+ ar_nr_collected[i+mM]++;
+ }
+ }
+ // we found right spot for this nonce stop looking
+ break;
+ }
}
}
// --- crypto
- crypto1_word(pcs, ar , 1);
- cardRr = nr ^ crypto1_word(pcs, 0, 0);
+ crypto1_word(pcs, nr , 1);
+ cardRr = ar ^ crypto1_word(pcs, 0, 0);
// test if auth OK
if (cardRr != prng_successor(nonce, 64)){
break;
}
+ //auth successful
ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0);
num_to_bytes(ans, 4, rAUTH_AT);
if (!len) {
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
break;
- }
- if (len == 2 && (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x20)) {
+ }
+ // select all cl2 - 0x95 0x20
+ if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && receivedCmd[1] == 0x20)) {
EmSendCmd(rUIDBCC2, sizeof(rUIDBCC2));
break;
}
- // select 2 card
+ // select cl2 card - 0x95 0x70 xxxxxxxxxxxx
if (len == 9 &&
- (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0)) {
- EmSendCmd(rSAK, sizeof(rSAK));
- cuid = bytes_to_num(rUIDBCC2, 4);
- cardSTATE = MFEMUL_WORK;
- LED_B_ON();
- if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol2 time: %d", GetTickCount() - selTimer);
+ (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0)) {
+ switch(_UID_LEN) {
+ case 7:
+ EmSendCmd(rSAKfinal, sizeof(rSAKfinal));
+ cardSTATE = MFEMUL_WORK;
+ LED_B_ON();
+ if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol2 time: %d", GetTickCount() - selTimer);
+ break;
+ case 10:
+ EmSendCmd(rSAK1, sizeof(rSAK1));
+ cardSTATE = MFEMUL_SELECT3;
+ break;
+ default:break;
+ }
break;
}
}
if (len == 4 && (receivedCmd[0] == 0x60 || receivedCmd[0] == 0x61)) {
+
+ // if authenticating to a block that shouldn't exist - as long as we are not doing the reader attack
+ if (receivedCmd[1] >= 16 * 4 && !(flags & FLAG_NR_AR_ATTACK)) {
+ //is this the correct response to an auth on a out of range block? marshmellow
+ EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
+ if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02x) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
+ break;
+ }
+
authTimer = GetTickCount();
cardAUTHSC = receivedCmd[1] / 4; // received block num
cardAUTHKEY = receivedCmd[0] - 0x60;
crypto1_destroy(pcs);//Added by martin
crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
+ //uint64_t key=emlGetKey(cardAUTHSC, cardAUTHKEY);
+ //Dbprintf("key: %04x%08x",(uint32_t)(key>>32)&0xFFFF,(uint32_t)(key&0xFFFFFFFF));
if (!encrypted_data) { // first authentication
if (MF_DBGLEVEL >= 4) Dbprintf("Reader authenticating for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY );
break;
}
}
+ button_pushed = BUTTON_PRESS();
}
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LEDsoff();
- if(flags & FLAG_INTERACTIVE)// Interactive mode flag, means we need to send ACK
- {
- //May just aswell send the collected ar_nr in the response aswell
- cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_responses,ar_nr_collected*4*4);
- }
-
- if(flags & FLAG_NR_AR_ATTACK)
- {
- if(ar_nr_collected > 1) {
- Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:");
- Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x",
- ar_nr_responses[0], // UID
- ar_nr_responses[1], //NT
- ar_nr_responses[2], //AR1
- ar_nr_responses[3], //NR1
- ar_nr_responses[6], //AR2
- ar_nr_responses[7] //NR2
- );
- } else {
- Dbprintf("Failed to obtain two AR/NR pairs!");
- if(ar_nr_collected >0) {
- Dbprintf("Only got these: UID=%08x, nonce=%08x, AR1=%08x, NR1=%08x",
- ar_nr_responses[0], // UID
- ar_nr_responses[1], //NT
- ar_nr_responses[2], //AR1
- ar_nr_responses[3] //NR1
+ if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1) {
+ for ( uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
+ if (ar_nr_collected[i] == 2) {
+ Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i<ATTACK_KEY_COUNT/2) ? "keyA" : "keyB", ar_nr_resp[i].sector);
+ Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x",
+ ar_nr_resp[i].cuid, //UID
+ ar_nr_resp[i].nonce, //NT
+ ar_nr_resp[i].nr, //NR1
+ ar_nr_resp[i].ar, //AR1
+ ar_nr_resp[i].nr2, //NR2
+ ar_nr_resp[i].ar2 //AR2
+ );
+ }
+ }
+ for ( uint8_t i = ATTACK_KEY_COUNT; i < ATTACK_KEY_COUNT*2; i++) {
+ if (ar_nr_collected[i] == 2) {
+ Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i<ATTACK_KEY_COUNT/2) ? "keyA" : "keyB", ar_nr_resp[i].sector);
+ Dbprintf("../tools/mfkey/mfkey32v2 %08x %08x %08x %08x %08x %08x %08x",
+ ar_nr_resp[i].cuid, //UID
+ ar_nr_resp[i].nonce, //NT
+ ar_nr_resp[i].nr, //NR1
+ ar_nr_resp[i].ar, //AR1
+ ar_nr_resp[i].nonce2,//NT2
+ ar_nr_resp[i].nr2, //NR2
+ ar_nr_resp[i].ar2 //AR2
);
}
}
}
if (MF_DBGLEVEL >= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen());
-
-}
+ if(flags & FLAG_INTERACTIVE) { // Interactive mode flag, means we need to send ACK
+ //Send the collected ar_nr in the response
+ cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,button_pushed,0,&ar_nr_resp,sizeof(ar_nr_resp));
+ }
+}
//-----------------------------------------------------------------------------
if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break;
/* And ready to receive another command. */
- UartReset();
+ UartInit(receivedCmd, receivedCmdPar);
/* And also reset the demod code */
DemodReset();
// And ready to receive another response.
DemodReset();
+ // And reset the Miller decoder including its (now outdated) input buffer
+ UartInit(receivedCmd, receivedCmdPar);
}
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
}
projects / proxmark3-svn / blobdiff