FIX: a suggested fix for #136 where the "lf t55x7 read" command when called with...

[proxmark3-svn] / armsrc / lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 4b668751c4a24016b4a0a8526e02d28d17b75b45..31fe4ca970db134dcb8f884dfeb77f9d47a68370 100644 (file)
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -1132,6 +1132,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
  * Relevant times in microsecond
  * To compensate antenna falling times shorten the write times
  * and enlarge the gap ones.
  * Relevant times in microsecond
  * To compensate antenna falling times shorten the write times
  * and enlarge the gap ones.

+ * Q5 tags seems to have issues when these values changes. 

  */
 
 #define START_GAP 50*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (or 15fc)
  */
 
 #define START_GAP 50*8 // was 250 // SPEC:  1*8 to 50*8 - typ 15*8 (or 15fc)


@@ -1257,7 +1258,6 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) {
        LED_A_OFF();
 }
 
        LED_A_OFF();
 }
 

-

 // Read card traceability data (page 1)
 void T55xxReadTrace(void){
        LED_A_ON();
 // Read card traceability data (page 1)
 void T55xxReadTrace(void){
        LED_A_ON();


@@ -1285,7 +1285,6 @@ void T55xxReadTrace(void){
        LED_A_OFF();
 }
 
        LED_A_OFF();
 }
 

-

 /*-------------- Cloning routines -----------*/
 // Copy HID id to card and setup block 0 config
 void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
 /*-------------- Cloning routines -----------*/
 // Copy HID id to card and setup block 0 config
 void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)


@@ -1542,7 +1541,6 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
 // Clone Indala 64-bit tag by UID to T55x7
 void CopyIndala64toT55x7(int hi, int lo)
 {
 // Clone Indala 64-bit tag by UID to T55x7
 void CopyIndala64toT55x7(int hi, int lo)
 {

-

        //Program the 2 data blocks for supplied 64bit UID
        // and the block 0 for Indala64 format
        T55xxWriteBlock(hi,1,0,0);
        //Program the 2 data blocks for supplied 64bit UID
        // and the block 0 for Indala64 format
        T55xxWriteBlock(hi,1,0,0);


@@ -1556,12 +1554,10 @@ void CopyIndala64toT55x7(int hi, int lo)
        //      T5567WriteBlock(0x603E1042,0);
 
        DbpString("DONE!");
        //      T5567WriteBlock(0x603E1042,0);
 
        DbpString("DONE!");

-

 }
 
 void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7)
 {
 }
 
 void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7)
 {

-

        //Program the 7 data blocks for supplied 224bit UID
        // and the block 0 for Indala224 format
        T55xxWriteBlock(uid1,1,0,0);
        //Program the 7 data blocks for supplied 224bit UID
        // and the block 0 for Indala224 format
        T55xxWriteBlock(uid1,1,0,0);


@@ -1580,7 +1576,6 @@ void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int
        //      T5567WriteBlock(0x603E10E2,0);
 
        DbpString("DONE!");
        //      T5567WriteBlock(0x603E10E2,0);
 
        DbpString("DONE!");

-

 }
 
 //-----------------------------------
 }
 
 //-----------------------------------


@@ -1591,7 +1586,6 @@ void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int
 #define FWD_CMD_READ 0x9
 #define FWD_CMD_DISABLE 0x5
 
 #define FWD_CMD_READ 0x9
 #define FWD_CMD_DISABLE 0x5
 

-

 uint8_t forwardLink_data[64]; //array of forwarded bits
 uint8_t * forward_ptr; //ptr for forward message preparation
 uint8_t fwd_bit_sz; //forwardlink bit counter
 uint8_t forwardLink_data[64]; //array of forwarded bits
 uint8_t * forward_ptr; //ptr for forward message preparation
 uint8_t fwd_bit_sz; //forwardlink bit counter


@@ -1601,9 +1595,7 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer
 // prepares command bits
 // see EM4469 spec
 //====================================================================
 // prepares command bits
 // see EM4469 spec
 //====================================================================

-//--------------------------------------------------------------------

 uint8_t Prepare_Cmd( uint8_t cmd ) {
 uint8_t Prepare_Cmd( uint8_t cmd ) {

-       //--------------------------------------------------------------------

 
        *forward_ptr++ = 0; //start bit
        *forward_ptr++ = 0; //second pause for 4050 code
 
        *forward_ptr++ = 0; //start bit
        *forward_ptr++ = 0; //second pause for 4050 code


@@ -1623,10 +1615,7 @@ uint8_t Prepare_Cmd( uint8_t cmd ) {
 // prepares address bits
 // see EM4469 spec
 //====================================================================
 // prepares address bits
 // see EM4469 spec
 //====================================================================

-
-//--------------------------------------------------------------------

 uint8_t Prepare_Addr( uint8_t addr ) {
 uint8_t Prepare_Addr( uint8_t addr ) {

-       //--------------------------------------------------------------------

 
        register uint8_t line_parity;
 
 
        register uint8_t line_parity;
 


@@ -1647,10 +1636,7 @@ uint8_t Prepare_Addr( uint8_t addr ) {
 // prepares data bits intreleaved with parity bits
 // see EM4469 spec
 //====================================================================
 // prepares data bits intreleaved with parity bits
 // see EM4469 spec
 //====================================================================

-
-//--------------------------------------------------------------------

 uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
 uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {

-       //--------------------------------------------------------------------

 
        register uint8_t line_parity;
        register uint8_t column_parity;
 
        register uint8_t line_parity;
        register uint8_t column_parity;


@@ -1694,21 +1680,14 @@ void SendForward(uint8_t fwd_bit_count) {
 
        LED_D_ON();
 
 
        LED_D_ON();
 

-       //Field on
-       FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-       FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-
-       // Give it a bit of time for the resonant antenna to settle.
-       // And for the tag to fully power up
-       SpinDelay(150);
-
+       // Set up FPGA, 125kHz
+       LFSetupFPGAForADC(95, true);
+       

        // force 1st mod pulse (start gap must be longer for 4305)
        fwd_bit_sz--; //prepare next bit modulation
        fwd_write_ptr++;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
        // force 1st mod pulse (start gap must be longer for 4305)
        fwd_bit_sz--; //prepare next bit modulation
        fwd_write_ptr++;
        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
        SpinDelayUs(55*8); //55 cycles off (8us each)for 4305

-       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz

        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
        SpinDelayUs(16*8); //16 cycles on (8us each)
 
        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
        SpinDelayUs(16*8); //16 cycles on (8us each)
 


@@ -1720,7 +1699,6 @@ void SendForward(uint8_t fwd_bit_count) {
                        //These timings work for 4469/4269/4305 (with the 55*8 above)
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
                        SpinDelayUs(23*8); //16-4 cycles off (8us each)
                        //These timings work for 4469/4269/4305 (with the 55*8 above)
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
                        SpinDelayUs(23*8); //16-4 cycles off (8us each)

-                       FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz

                        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
                        SpinDelayUs(9*8); //16 cycles on (8us each)
                }
                        FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
                        SpinDelayUs(9*8); //16 cycles on (8us each)
                }


@@ -1739,7 +1717,6 @@ void EM4xLogin(uint32_t Password) {
 
        //Wait for command to complete
        SpinDelay(20);
 
        //Wait for command to complete
        SpinDelay(20);

-

 }
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 }
 
 void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {


@@ -1779,9 +1756,9 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
                        if (i >= bufferlength) break;
                }
        }
                        if (i >= bufferlength) break;
                }
        }

-  
+
+       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off    

        cmd_send(CMD_ACK,0,0,0,0,0);
        cmd_send(CMD_ACK,0,0,0,0,0);

-       FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off

        LED_D_OFF();
 }
 
        LED_D_OFF();
 }
 


@@ -1805,13 +1782,15 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode
        LED_D_OFF();
 }
 
        LED_D_OFF();
 }
 

-void CopyViKingtoT55x7(uint32_t block1,uint32_t block2) {
+void CopyViKingtoT55x7(uint32_t block1, uint32_t block2) {

     LED_D_ON();
     T55xxWriteBlock(block1,1,0,0);
     T55xxWriteBlock(block2,2,0,0);
     LED_D_ON();
     T55xxWriteBlock(block1,1,0,0);
     T55xxWriteBlock(block2,2,0,0);

-

     T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T5555_MAXBLOCK_SHIFT,0,0,1);
     T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T5555_MAXBLOCK_SHIFT,0,0,1);

+       // ICEMAN NOTES:
+       // Shouldn't this one be: T55x7_MAXBLOCK_SHIFT  and 0 in password mode
+       // like this:
+       // T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T55x7_MAXBLOCK_SHIFT,0,0,0);

     LED_D_OFF();
     LED_D_OFF();

-    DbpString("DONE!");

 }
 
 }