Fix hf 15 sim (#696)

[proxmark3-svn] / common / iso15693tools.h

diff --git a/common/iso15693tools.h b/common/iso15693tools.h
index ec63728fe1a50604f849ef6ae213f1ecd81554e2..96095fba51e13717a00ff359f050eb48441e657d 100644 (file)
--- a/common/iso15693tools.h
+++ b/common/iso15693tools.h
@@ -5,67 +5,9 @@
 #define ISO15693_H__
 
 // ISO15693 CRC
 #define ISO15693_H__
 
 // ISO15693 CRC

-#define ISO15_CRC_PRESET       (uint16_t)0xFFFF
-#define ISO15_CRC_POLY         (uint16_t)0x8408
-#define ISO15_CRC_CHECK                ((uint16_t)(~0xF0B8 & 0xFFFF))  // use this for checking of a correct crc
-
-// REQUEST FLAGS
-
-#define ISO15_REQ_SUBCARRIER_SINGLE    0x00    // Tag should respond using one subcarrier (ASK)
-#define ISO15_REQ_SUBCARRIER_TWO               0x01    // Tag should respond using two subcarriers (FSK)
-#define ISO15_REQ_DATARATE_LOW         0x00    // Tag should respond using low data rate
-#define ISO15_REQ_DATARATE_HIGH                0x02    // Tag should respond using high data rate
-#define ISO15_REQ_NONINVENTORY         0x00
-#define ISO15_REQ_INVENTORY            0x04    // This is an inventory request - see inventory flags
-#define ISO15_REQ_PROTOCOL_NONEXT              0x00
-#define ISO15_REQ_PROTOCOL_EXT         0x08    // RFU
-
-// REQUEST FLAGS when INVENTORY is not set
-
-#define ISO15_REQ_SELECT                       0x10    // only selected cards response
-#define ISO15_REQ_ADDRESS                      0x20    // this req contains an address
-#define ISO15_REQ_OPTION                       0x40    // Command specific option selector
-
-//REQUEST FLAGS when INVENTORY is set
-
-#define ISO15_REQINV_AFI                       0x10    // AFI Field is present
-#define ISO15_REQINV_SLOT1             0x20    // 1 Slot
-#define ISO15_REQINV_SLOT16            0x00    // 16 Slots
-#define ISO15_REQINV_OPTION            0x40    // Command specific option selector
-
-//RESPONSE FLAGS
-#define ISO15_RES_ERROR                        0x01
-#define ISO15_RES_EXT                  0x08    // Protocol Extention   
-
-// RESPONSE ERROR CODES
-#define ISO15_NOERROR                  0x00
-#define ISO15_ERROR_CMD_NOT_SUP                0x01    // Command not supported
-#define ISO15_ERROR_CMD_NOT_REC                0x02    // Command not recognized (eg. parameter error)
-#define ISO15_ERROR_CMD_OPTION         0x03    // Command option not supported
-#define ISO15_ERROR_GENERIC            0x0F    // No additional Info about this error
-#define ISO15_ERROR_BLOCK_UNAVAILABLE  0x10    
-#define ISO15_ERROR_BLOCK_LOCKED_ALREADY       0x11    // cannot lock again
-#define ISO15_ERROR_BLOCK_LOCKED               0x12    // cannot be changed
-#define ISO15_ERROR_BLOCK_WRITE                0x13    // Writing was unsuccessful
-#define ISO15_ERROR_BLOCL_WRITELOCK    0x14    // Locking was unsuccessful
-
-// COMMAND CODES
-#define ISO15_CMD_INVENTORY                    0x01
-#define ISO15_CMD_STAYQUIET                    0x02
-#define ISO15_CMD_READ                                 0x20
-#define ISO15_CMD_WRITE                                        0x21
-#define ISO15_CMD_LOCK                                 0x22
-#define ISO15_CMD_READMULTI                    0x23
-#define ISO15_CMD_WRITEMULTI                   0x24
-#define ISO15_CMD_SELECT                               0x25
-#define ISO15_CMD_RESET                                        0x26
-#define ISO15_CMD_WRITEAFI                             0x27
-#define ISO15_CMD_LOCKAFI                              0x28
-#define ISO15_CMD_WRITEDSFID                   0x29
-#define ISO15_CMD_LOCKDSFID                    0x2A
-#define ISO15_CMD_SYSINFO                              0x2B
-#define ISO15_CMD_SECSTATUS                    0x2C
-
+#define ISO15693_CRC_PRESET  (uint16_t)0xFFFF
+#define ISO15693_CRC_POLY    (uint16_t)0x8408
+#define ISO15693_CRC_CHECK   ((uint16_t)(~0xF0B8 & 0xFFFF))  // use this for checking of a correct crc

 
 uint16_t Iso15693Crc(uint8_t *v, int n);
 int Iso15693AddCrc(uint8_t *req, int n);
 
 uint16_t Iso15693Crc(uint8_t *v, int n);
 int Iso15693AddCrc(uint8_t *req, int n);