#include <stdarg.h>
#include <stdlib.h>
#include <stdio.h>
+#include <stdbool.h>
#include <time.h>
#include <readline/readline.h>
#include <pthread.h>
-
+#include "loclass/cipherutils.h"
#include "ui.h"
+#include "cmdmain.h"
+#include "cmddata.h"
+#include "graph.h"
+//#include <liquid/liquid.h>
+#define M_PI 3.14159265358979323846264338327
double CursorScaleFactor;
int PlotGridX, PlotGridY, PlotGridXdefault= 64, PlotGridYdefault= 64;
int offline;
-int flushAfterWrite = 0; //buzzy
+int flushAfterWrite = 0;
extern pthread_mutex_t print_lock;
static char *logfilename = "proxmark3.log";
int saved_point;
va_list argptr, argptr2;
static FILE *logfile = NULL;
- static int logging=1;
+ static int logging = 1;
// lock this section to avoid interlacing prints from different threats
pthread_mutex_lock(&print_lock);
if (logging && !logfile) {
- logfile=fopen(logfilename, "a");
+ logfile = fopen(logfilename, "a");
if (!logfile) {
fprintf(stderr, "Can't open logfile, logging disabled!\n");
logging=0;
}
va_end(argptr2);
- if (flushAfterWrite == 1) //buzzy
- {
+ if (flushAfterWrite == 1) {
fflush(NULL);
}
//release lock
pthread_mutex_unlock(&print_lock);
}
-
void SetLogFilename(char *fn)
{
logfilename = fn;
}
-
-uint8_t manchester_decode(const uint8_t * data, const size_t len, uint8_t * dataout){
+int manchester_decode( int * data, const size_t len, uint8_t * dataout, size_t dataoutlen){
- size_t bytelength = len;
-
- uint8_t bitStream[bytelength];
- memset(bitStream, 0x00, bytelength);
-
- int clock,high, low, bit, hithigh, hitlow, first, bit2idx, lastpeak;
- int i,invert, lastval;
- int bitidx = 0;
- int lc = 0;
- int warnings = 0;
+ int bitlength = 0;
+ int clock, high, low, startindex;
+ low = startindex = 0;
high = 1;
- low = bit = bit2idx = lastpeak = invert = lastval = hithigh = hitlow = first = 0;
- clock = 0xFFFF;
-
- /* Detect high and lows */
- for (i = 0; i < bytelength; i++) {
- if (data[i] > high)
- high = data[i];
- else if (data[i] < low)
- low = data[i];
- }
+ uint8_t * bitStream = (uint8_t* ) malloc(sizeof(uint8_t) * dataoutlen);
+ memset(bitStream, 0x00, dataoutlen);
+ /* Detect high and lows */
+ DetectHighLowInGraph(&high, &low, TRUE);
+
/* get clock */
- int j=0;
- for (i = 1; i < bytelength; i++) {
- /* if this is the beginning of a peak */
- j = i-1;
- if ( data[j] != data[i] &&
- data[i] == high)
- {
- /* find lowest difference between peaks */
- if (lastpeak && i - lastpeak < clock)
- clock = i - lastpeak;
- lastpeak = i;
- }
- }
-
- int tolerance = clock/4;
- PrintAndLog(" Detected clock: %d",clock);
-
- /* Detect first transition */
- /* Lo-Hi (arbitrary) */
- /* skip to the first high */
- for (i= 0; i < bytelength; i++)
- if (data[i] == high)
- break;
-
- /* now look for the first low */
- for (; i < bytelength; i++) {
- if (data[i] == low) {
- lastval = i;
+ clock = GetAskClock("",false, false);
+
+ startindex = DetectFirstTransition(data, len, high);
+
+ if (high != 1)
+ // decode "raw"
+ bitlength = ManchesterConvertFrom255(data, len, bitStream, dataoutlen, high, low, clock, startindex);
+ else
+ // decode manchester
+ bitlength = ManchesterConvertFrom1(data, len, bitStream, dataoutlen, clock, startindex);
+
+ memcpy(dataout, bitStream, bitlength);
+ free(bitStream);
+ return bitlength;
+}
+
+ int DetectFirstTransition(const int * data, const size_t len, int threshold){
+
+ int i = 0;
+ /* now look for the first threshold */
+ for (; i < len; ++i) {
+ if (data[i] == threshold) {
break;
}
- }
-
- /* If we're not working with 1/0s, demod based off clock */
- if (high != 1)
+ }
+ return i;
+ }
+
+ int ManchesterConvertFrom255(const int * data, const size_t len, uint8_t * dataout, int dataoutlen, int high, int low, int clock, int startIndex){
+
+ int i, j, z, hithigh, hitlow, bitIndex, startType;
+ i = 0;
+ bitIndex = 0;
+
+ int isDamp = 0;
+ int damplimit = (int)((high / 2) * 0.3);
+ int dampHi = (high/2)+damplimit;
+ int dampLow = (high/2)-damplimit;
+ int firstST = 0;
+
+ // i = clock frame of data
+ for (; i < (int)(len/clock); i++)
{
- bit = 0; /* We assume the 1st bit is zero, it may not be
- * the case: this routine (I think) has an init problem.
- * Ed.
- */
- for (; i < (int)(bytelength / clock); i++)
- {
hithigh = 0;
hitlow = 0;
- first = 1;
-
+ startType = -1;
+ z = startIndex + (i*clock);
+ isDamp = 0;
+
/* Find out if we hit both high and low peaks */
for (j = 0; j < clock; j++)
- {
- if (data[(i * clock) + j] == high)
+ {
+ if (data[z+j] == high){
hithigh = 1;
- else if (data[(i * clock) + j] == low)
+ if ( startType == -1)
+ startType = 1;
+ }
+
+ if (data[z+j] == low ){
hitlow = 1;
-
- /* it doesn't count if it's the first part of our read
- because it's really just trailing from the last sequence */
- if (first && (hithigh || hitlow))
- hithigh = hitlow = 0;
- else
- first = 0;
-
+ if ( startType == -1)
+ startType = 0;
+ }
+
if (hithigh && hitlow)
break;
- }
-
- /* If we didn't hit both high and low peaks, we had a bit transition */
- if (!hithigh || !hitlow)
- bit ^= 1;
-
- bitStream[bit2idx++] = bit ^ invert;
}
- }
- /* standard 1/0 bitstream */
- else {
- /* Then detect duration between 2 successive transitions */
- for (bitidx = 1; i < bytelength; i++) {
- if (data[i-1] != data[i]) {
- lc = i-lastval;
- lastval = i;
-
- // Error check: if bitidx becomes too large, we do not
- // have a Manchester encoded bitstream or the clock is really
- // wrong!
- if (bitidx > (bytelength*2/clock+8) ) {
- PrintAndLog("Error: the clock you gave is probably wrong, aborting.");
- return 0;
+ // No high value found, are we in a dampening field?
+ if ( !hithigh ) {
+ //PrintAndLog(" # Entering damp test at index : %d (%d)", z+j, j);
+ for (j = 0; j < clock; j++) {
+ if (
+ (data[z+j] <= dampHi && data[z+j] >= dampLow)
+ ){
+ isDamp++;
}
- // Then switch depending on lc length:
- // Tolerance is 1/4 of clock rate (arbitrary)
- if (abs(lc-clock/2) < tolerance) {
- // Short pulse : either "1" or "0"
- bitStream[bitidx++] = data[i-1];
- } else if (abs(lc-clock) < tolerance) {
- // Long pulse: either "11" or "00"
- bitStream[bitidx++] = data[i-1];
- bitStream[bitidx++] = data[i-1];
- } else {
- // Error
- warnings++;
- PrintAndLog("Warning: Manchester decode error for pulse width detection.");
- if (warnings > 10) {
- PrintAndLog("Error: too many detection errors, aborting.");
- return 0;
- }
+ }
+ }
+
+ /* Manchester Switching..
+ 0: High -> Low
+ 1: Low -> High
+ */
+ if (startType == 0)
+ dataout[bitIndex++] = 1;
+ else if (startType == 1)
+ dataout[bitIndex++] = 0;
+ else
+ dataout[bitIndex++] = 2;
+
+ if ( isDamp > clock/2 ) {
+ firstST++;
+ }
+
+ if ( firstST == 4)
+ break;
+ if ( bitIndex >= dataoutlen-1 )
+ break;
+ }
+ return bitIndex;
+ }
+
+ int ManchesterConvertFrom1(const int * data, const size_t len, uint8_t * dataout,int dataoutlen, int clock, int startIndex){
+
+ int i,j, bitindex, lc, tolerance, warnings;
+ warnings = 0;
+ int upperlimit = len*2/clock+8;
+ i = startIndex;
+ j = 0;
+ tolerance = clock/4;
+ uint8_t decodedArr[len];
+
+ /* Detect duration between 2 successive transitions */
+ for (bitindex = 1; i < len; i++) {
+
+ if (data[i-1] != data[i]) {
+ lc = i - startIndex;
+ startIndex = i;
+
+ // Error check: if bitindex becomes too large, we do not
+ // have a Manchester encoded bitstream or the clock is really wrong!
+ if (bitindex > upperlimit ) {
+ PrintAndLog("Error: the clock you gave is probably wrong, aborting.");
+ return 0;
+ }
+ // Then switch depending on lc length:
+ // Tolerance is 1/4 of clock rate (arbitrary)
+ if (abs((lc-clock)/2) < tolerance) {
+ // Short pulse : either "1" or "0"
+ decodedArr[bitindex++] = data[i-1];
+ } else if (abs(lc-clock) < tolerance) {
+ // Long pulse: either "11" or "00"
+ decodedArr[bitindex++] = data[i-1];
+ decodedArr[bitindex++] = data[i-1];
+ } else {
+ ++warnings;
+ PrintAndLog("Warning: Manchester decode error for pulse width detection.");
+ if (warnings > 10) {
+ PrintAndLog("Error: too many detection errors, aborting.");
+ return 0;
}
}
}
}
- // At this stage, we now have a bitstream of "01" ("1") or "10" ("0"), parse it into final decoded bitstream
- // Actually, we overwrite BitStream with the new decoded bitstream, we just need to be careful
- // to stop output at the final bitidx2 value, not bitidx
- for (i = 0; i < bitidx; i += 2) {
- if ((bitStream[i] == 0) && (bitStream[i+1] == 1)) {
- bitStream[bit2idx++] = 1 ^ invert;
- }
- else if ((bitStream[i] == 1) && (bitStream[i+1] == 0)) {
- bitStream[bit2idx++] = 0 ^ invert;
- }
- else {
- // We cannot end up in this state, this means we are unsynchronized,
- // move up 1 bit:
+
+ /*
+ * We have a decodedArr of "01" ("1") or "10" ("0")
+ * parse it into final decoded dataout
+ */
+ for (i = 0; i < bitindex; i += 2) {
+
+ if ((decodedArr[i] == 0) && (decodedArr[i+1] == 1)) {
+ dataout[j++] = 1;
+ } else if ((decodedArr[i] == 1) && (decodedArr[i+1] == 0)) {
+ dataout[j++] = 0;
+ } else {
i++;
warnings++;
PrintAndLog("Unsynchronized, resync...");
- if (warnings > 10) {
+ PrintAndLog("(too many of those messages mean the stream is not Manchester encoded)");
+
+ if (warnings > 10) {
PrintAndLog("Error: too many decode errors, aborting.");
return 0;
}
}
}
+
+ PrintAndLog("%s", sprint_hex(dataout, j));
+ return j;
+ }
+
+ void ManchesterDiffDecodedString(const uint8_t* bitstream, size_t len, uint8_t invert){
+ /*
+ * We have a bitstream of "01" ("1") or "10" ("0")
+ * parse it into final decoded bitstream
+ */
+ int i, j, warnings;
+ uint8_t decodedArr[(len/2)+1];
- // PrintAndLog(" Manchester decoded bitstream : %d bits", (bit2idx-16));
- // uint8_t mod = (bit2idx-16) % blocksize;
- // uint8_t div = (bit2idx-16) / blocksize;
-
- // // Now output the bitstream to the scrollback by line of 16 bits
- // for (i = 0; i < div*blocksize; i+=blocksize) {
- // PrintAndLog(" %s", sprint_bin(bitStream+i,blocksize) );
- // }
- // if ( mod > 0 ){
- // PrintAndLog(" %s", sprint_bin(bitStream+i, mod) );
- // }
+ j = warnings = 0;
- if ( bit2idx > 0 )
- memcpy(dataout, bitStream, bit2idx);
+ uint8_t lastbit = 0;
- free(bitStream);
- return bit2idx;
-}
+ for (i = 0; i < len; i += 2) {
+
+ uint8_t first = bitstream[i];
+ uint8_t second = bitstream[i+1];
+ if ( first == second ) {
+ ++i;
+ ++warnings;
+ if (warnings > 10) {
+ PrintAndLog("Error: too many decode errors, aborting.");
+ return;
+ }
+ }
+ else if ( lastbit != first ) {
+ decodedArr[j++] = 0 ^ invert;
+ }
+ else {
+ decodedArr[j++] = 1 ^ invert;
+ }
+ lastbit = second;
+ }
+
+ PrintAndLog("%s", sprint_hex(decodedArr, j));
+}
+
void PrintPaddedManchester( uint8_t* bitStream, size_t len, size_t blocksize){
- PrintAndLog(" Manchester decoded bitstream : %d bits", len);
+ PrintAndLog(" Manchester decoded : %d bits", len);
- uint8_t mod = len % blocksize;
- uint8_t div = len / blocksize;
- int i;
- // Now output the bitstream to the scrollback by line of 16 bits
- for (i = 0; i < div*blocksize; i+=blocksize) {
+ uint8_t mod = len % blocksize;
+ uint8_t div = len / blocksize;
+ int i;
+
+ // Now output the bitstream to the scrollback by line of 16 bits
+ for (i = 0; i < div*blocksize; i+=blocksize) {
PrintAndLog(" %s", sprint_bin(bitStream+i,blocksize) );
- }
- if ( mod > 0 ){
- PrintAndLog(" %s", sprint_bin(bitStream+i, mod) );
- }
+ }
+
+ if ( mod > 0 )
+ PrintAndLog(" %s", sprint_bin(bitStream+i, mod) );
+}
+
+/* Sliding DFT
+ Smooths out
+*/
+void iceFsk2(int * data, const size_t len){
+
+ int i, j;
+ int * output = (int* ) malloc(sizeof(int) * len);
+ memset(output, 0x00, len);
+
+ // for (i=0; i<len-5; ++i){
+ // for ( j=1; j <=5; ++j) {
+ // output[i] += data[i*j];
+ // }
+ // output[i] /= 5;
+ // }
+ int rest = 127;
+ int tmp =0;
+ for (i=0; i<len; ++i){
+ if ( data[i] < 127)
+ output[i] = 0;
+ else {
+ tmp = (100 * (data[i]-rest)) / rest;
+ output[i] = (tmp > 60)? 100:0;
+ }
+ }
+
+ for (j=0; j<len; ++j)
+ data[j] = output[j];
+
+ free(output);
+}
+
+void iceFsk3(int * data, const size_t len){
+
+ int i,j;
+
+ int * output = (int* ) malloc(sizeof(int) * len);
+ memset(output, 0x00, len);
+ float fc = 0.1125f; // center frequency
+ size_t adjustedLen = len;
+
+ // create very simple low-pass filter to remove images (2nd-order Butterworth)
+ float complex iir_buf[3] = {0,0,0};
+ float b[3] = {0.003621681514929, 0.007243363029857, 0.003621681514929};
+ float a[3] = {1.000000000000000, -1.822694925196308, 0.837181651256023};
+
+ float sample = 0; // input sample read from file
+ float complex x_prime = 1.0f; // save sample for estimating frequency
+ float complex x;
+
+ for (i=0; i<adjustedLen; ++i) {
+
+ sample = data[i]+128;
+
+ // remove DC offset and mix to complex baseband
+ x = (sample - 127.5f) * cexpf( _Complex_I * 2 * M_PI * fc * i );
+
+ // apply low-pass filter, removing spectral image (IIR using direct-form II)
+ iir_buf[2] = iir_buf[1];
+ iir_buf[1] = iir_buf[0];
+ iir_buf[0] = x - a[1]*iir_buf[1] - a[2]*iir_buf[2];
+ x = b[0]*iir_buf[0] +
+ b[1]*iir_buf[1] +
+ b[2]*iir_buf[2];
+
+ // compute instantaneous frequency by looking at phase difference
+ // between adjacent samples
+ float freq = cargf(x*conjf(x_prime));
+ x_prime = x; // retain this sample for next iteration
+
+ output[i] =(freq > 0)? 10 : -10;
+ }
+
+ // show data
+ for (j=0; j<adjustedLen; ++j)
+ data[j] = output[j];
+
+ CmdLtrim("30");
+ adjustedLen -= 30;
+
+ // zero crossings.
+ for (j=0; j<adjustedLen; ++j){
+ if ( data[j] == 10) break;
+ }
+ int startOne =j;
+
+ for (;j<adjustedLen; ++j){
+ if ( data[j] == -10 ) break;
+ }
+ int stopOne = j-1;
+
+ int fieldlen = stopOne-startOne;
+
+ fieldlen = (fieldlen == 39 || fieldlen == 41)? 40 : fieldlen;
+ fieldlen = (fieldlen == 59 || fieldlen == 51)? 50 : fieldlen;
+ if ( fieldlen != 40 && fieldlen != 50){
+ printf("Detected field Length: %d \n", fieldlen);
+ printf("Can only handle 40 or 50. Aborting...\n");
+ return;
+ }
+
+ // FSK sequence start == 000111
+ int startPos = 0;
+ for (i =0; i<adjustedLen; ++i){
+ int dec = 0;
+ for ( j = 0; j < 6*fieldlen; ++j){
+ dec += data[i + j];
+ }
+ if (dec == 0) {
+ startPos = i;
+ break;
+ }
+ }
+
+ printf("000111 position: %d \n", startPos);
+
+ startPos += 6*fieldlen+5;
+
+ int bit =0;
+ printf("BINARY\n");
+ printf("R/40 : ");
+ for (i =startPos ; i < adjustedLen; i += 40){
+ bit = data[i]>0 ? 1:0;
+ printf("%d", bit );
+ }
+ printf("\n");
+
+ printf("R/50 : ");
+ for (i =startPos ; i < adjustedLen; i += 50){
+ bit = data[i]>0 ? 1:0;
+ printf("%d", bit ); }
+ printf("\n");
+
+ free(output);
+}
+
+float complex cexpf (float complex Z)
+{
+ float complex Res;
+ double rho = exp (__real__ Z);
+ __real__ Res = rho * cosf(__imag__ Z);
+ __imag__ Res = rho * sinf(__imag__ Z);
+ return Res;
}
projects / proxmark3-svn / blobdiff