ADD: `analyse nuid` - generates NUID 4byte from a UID 7byte. Mifare Classic Ev1...

[proxmark3-svn] / client / flash.c

diff --git a/client/flash.c b/client/flash.c
index 576f0d27a340a0e7cb648672a7483e9322d84fa8..37ee8fb0ddd2dc550085194ca576a4717ea29dc6 100644 (file)
--- a/client/flash.c
+++ b/client/flash.c
@@ -28,7 +28,13 @@ int OpenProxmark(size_t i);
 unsigned int current_command = CMD_UNKNOWN;
 
 #define FLASH_START            0x100000
-#define FLASH_SIZE             (256*1024)
+
+#ifdef HAS_512_FLASH
+# define FLASH_SIZE             (512*1024)
+#else
+# define FLASH_SIZE             (256*1024)
+#endif
+
 #define FLASH_END              (FLASH_START + FLASH_SIZE)
 #define BOOTLOADER_SIZE        0x2000
 #define BOOTLOADER_END         (FLASH_START + BOOTLOADER_SIZE)
@@ -296,7 +302,7 @@ static int get_proxmark_state(uint32_t *state)
                        *state = resp.arg[0];
                        break;
                default:
-                       fprintf(stderr, "Error: Couldn't get proxmark state, bad response type: 0x%04"llx"\n", resp.cmd);
+                       fprintf(stderr, "Error: Couldn't get proxmark state, bad response type: 0x%04" PRIx64 "\n", resp.cmd);
                        return -1;
                        break;
        }
@@ -312,10 +318,9 @@ static int enter_bootloader(char *serial_port_name)
        if (get_proxmark_state(&state) < 0)
                return -1;
 
-       if (state & DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM) {
-               /* Already in flash state, we're done. */
+       /* Already in flash state, we're done. */
+       if (state & DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM)
                return 0;
-       }
 
        if (state & DEVICE_INFO_FLAG_CURRENT_MODE_OS) {
                fprintf(stderr,"Entering bootloader...\n");
@@ -323,8 +328,7 @@ static int enter_bootloader(char *serial_port_name)
                memset(&c, 0, sizeof (c));
 
                if ((state & DEVICE_INFO_FLAG_BOOTROM_PRESENT)
-                       && (state & DEVICE_INFO_FLAG_OSIMAGE_PRESENT))
-               {
+                       && (state & DEVICE_INFO_FLAG_OSIMAGE_PRESENT)) {
                        // New style handover: Send CMD_START_FLASH, which will reset the board
                        // and enter the bootrom on the next boot.
                        c.cmd = CMD_START_FLASH;
@@ -336,16 +340,15 @@ static int enter_bootloader(char *serial_port_name)
                        SendCommand(&c);
                        fprintf(stderr,"Press and hold down button NOW if your bootloader requires it.\n");
                }
-    msleep(100);
+               msleep(100);
                CloseProxmark();
 
                fprintf(stderr,"Waiting for Proxmark to reappear on %s",serial_port_name);
-    do {
+               do {
                        sleep(1);
                        fprintf(stderr, ".");
                } while (!OpenProxmark(0));
                fprintf(stderr," Found.\n");
-
                return 0;
        }
 
@@ -353,11 +356,11 @@ static int enter_bootloader(char *serial_port_name)
        return -1;
 }
 
-static int wait_for_ack(UsbCommand *ack)
+static int wait_for_ack(UsbCommand *ack) 
 {
        ReceiveCommand(ack);
        if (ack->cmd != CMD_ACK) {
-               printf("Error: Unexpected reply 0x%04"llx" (expected ACK)\n", ack->cmd);
+               printf("Error: Unexpected reply 0x%04" PRIx64 " %s (expected ACK)\n", ack->cmd, (ack->cmd==CMD_NACK)?"NACK":"");
                return -1;
        }
        return 0;
@@ -401,23 +404,20 @@ int flash_start_flashing(int enable_bl_writes,char *serial_port_name)
 static int write_block(uint32_t address, uint8_t *data, uint32_t length)
 {
        uint8_t block_buf[BLOCK_SIZE];
-
        memset(block_buf, 0xFF, BLOCK_SIZE);
        memcpy(block_buf, data, length);
-  UsbCommand c;
-       c.cmd = CMD_FINISH_WRITE;
-       c.arg[0] = address;
+       UsbCommand c = {CMD_FINISH_WRITE, {address, 0, 0}};
        memcpy(c.d.asBytes, block_buf, length);
-  SendCommand(&c);
+       SendCommand(&c);
        int ret = wait_for_ack(&c);
        if (ret && c.arg[0]) {
                uint32_t lock_bits = c.arg[0] >> 16;
                bool lock_error = c.arg[0] & AT91C_MC_LOCKE;
                bool prog_error = c.arg[0] & AT91C_MC_PROGE;
                bool security_bit = c.arg[0] & AT91C_MC_SECURITY;
-               printf("%s", lock_error?"       Lock Error\n":"");
-               printf("%s", prog_error?"       Invalid Command or bad Keyword\n":"");
-               printf("%s", security_bit?"       Security Bit is set!\n":"");
+               printf("%s", lock_error ? "       Lock Error\n" : "");
+               printf("%s", prog_error ? "       Invalid Command or bad Keyword\n" : "");
+               printf("%s", security_bit ? "       Security Bit is set!\n" : "");
                printf("       Lock Bits:      0x%04x\n", lock_bits);
        }
        return ret;
@@ -480,7 +480,7 @@ void flash_free(flash_file_t *ctx)
 // just reset the unit
 int flash_stop_flashing(void) {
        UsbCommand c = {CMD_HARDWARE_RESET};
-  SendCommand(&c);
-  msleep(100);
-  return 0;
+       SendCommand(&c);
+       msleep(100);
+       return 0;
 }