Merge branch 'master' of https://github.com/iceman1001/proxmark3

[proxmark3-svn] / bootrom / bootrom.c

diff --git a/bootrom/bootrom.c b/bootrom/bootrom.c
index 04bc14bea3a522f615f670e94b548db5e7250831..63c04ae5c952ab4ec61aac15f1d61ba4b188e5a4 100644 (file)
--- a/bootrom/bootrom.c
+++ b/bootrom/bootrom.c
@@ -1,4 +1,22 @@
+//-----------------------------------------------------------------------------
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Main code for the bootloader
+//-----------------------------------------------------------------------------
+

 #include <proxmark3.h>
 #include <proxmark3.h>

+#include "usb_cdc.h"
+#include "cmd.h"
+
+void DbpString(char *str) {
+       byte_t len = 0;
+       while (str[len] != 0x00)
+               ++len;
+       
+       cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len);
+}

 
 struct common_area common_area __attribute__((section(".commonarea")));
 unsigned int start_addr, end_addr, bootrom_unlocked;
 
 struct common_area common_area __attribute__((section(".commonarea")));
 unsigned int start_addr, end_addr, bootrom_unlocked;


@@ -21,21 +39,22 @@ static void ConfigClocks(void)
                (1<<AT91C_ID_PWMC)      |
                (1<<AT91C_ID_UDP);
 
                (1<<AT91C_ID_PWMC)      |
                (1<<AT91C_ID_UDP);
 

-       // worst case scenario, with 16Mhz xtal startup delay is 14.5ms
-       // with a slow clock running at it worst case (max) frequency of 42khz
-       // max startup delay = (14.5ms*42k)/8 = 76 = 0x4C round up to 0x50
+       // worst case scenario, with MAINCK = 16Mhz xtal, startup delay is 1.4ms
+       // if SLCK slow clock runs at its worst case (max) frequency of 42khz
+       // max startup delay = (1.4ms*42k)/8 = 7.356 so round up to 8

 
        // enable main oscillator and set startup delay
     AT91C_BASE_PMC->PMC_MOR =
 
        // enable main oscillator and set startup delay
     AT91C_BASE_PMC->PMC_MOR =

-       PMC_MAIN_OSC_ENABLE |
-        PMC_MAIN_OSC_STARTUP_DELAY(0x50);
+        AT91C_CKGR_MOSCEN |
+        PMC_MAIN_OSC_STARTUP_DELAY(8);

 
        // wait for main oscillator to stabilize
 
        // wait for main oscillator to stabilize

-       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_STABILIZED) )
+       while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS) )

                ;
 
                ;
 

-    // minimum PLL clock frequency is 80 MHz in range 00 (96 here so okay)
-    // frequency is crystal * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz
+    // PLL output clock frequency in range  80 - 160 MHz needs CKGR_PLL = 00
+    // PLL output clock frequency in range 150 - 180 MHz needs CKGR_PLL = 10
+    // PLL output is MAINCK * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz

     AT91C_BASE_PMC->PMC_PLLR =
        PMC_PLL_DIVISOR(2) |
                PMC_PLL_COUNT_BEFORE_LOCK(0x50) |
     AT91C_BASE_PMC->PMC_PLLR =
        PMC_PLL_DIVISOR(2) |
                PMC_PLL_COUNT_BEFORE_LOCK(0x50) |


@@ -44,132 +63,131 @@ static void ConfigClocks(void)
                PMC_PLL_USB_DIVISOR(1);
 
        // wait for PLL to lock
                PMC_PLL_USB_DIVISOR(1);
 
        // wait for PLL to lock

-       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_PLL_LOCK) )
+       while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) )

                ;
 
        // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz
                ;
 
        // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz

-       // as per datasheet, this register must be programmed in two operations
+       // datasheet recommends that this register is programmed in two operations

        // when changing to PLL, program the prescaler first then the source
        // when changing to PLL, program the prescaler first then the source

-    AT91C_BASE_PMC->PMC_MCKR = PMC_CLK_PRESCALE_DIV_2;
+    AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;

 
        // wait for main clock ready signal
 
        // wait for main clock ready signal

-       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) )
+       while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) )

                ;
 
        // set the source to PLL
                ;
 
        // set the source to PLL

-    AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | PMC_CLK_PRESCALE_DIV_2;
+    AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLL_CLK;

 
        // wait for main clock ready signal
 
        // wait for main clock ready signal

-       while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) )
+       while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) )

                ;
 }
 
                ;
 }
 

-static void Fatal(void)
-{
-    for(;;);
+static void Fatal(void) {
+  for(;;);

 }
 
 }
 

-void UsbPacketReceived(uint8_t *packet, int len)
-{
-    int i, dont_ack=0;
-    UsbCommand *c = (UsbCommand *)packet;
-    volatile uint32_t *p;
-
-    if(len != sizeof(*c)) {
-        Fatal();
-    }
-
-    switch(c->cmd) {
-        case CMD_DEVICE_INFO:
-            dont_ack = 1;
-            c->cmd = CMD_DEVICE_INFO;
-            c->arg[0] = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM |
-                DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH;
-            if(common_area.flags.osimage_present) c->arg[0] |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT;
-            UsbSendPacket(packet, len);
-            break;
-
-        case CMD_SETUP_WRITE:
-            /* The temporary write buffer of the embedded flash controller is mapped to the
-             * whole memory region, only the last 8 bits are decoded.
-             */
-            p = (volatile uint32_t *)&_flash_start;
-            for(i = 0; i < 12; i++) {
-                p[i+c->arg[0]] = c->d.asDwords[i];
-            }
-            break;
-
-        case CMD_FINISH_WRITE:
-            p = (volatile uint32_t *)&_flash_start;
-            for(i = 0; i < 4; i++) {
-                p[i+60] = c->d.asDwords[i];
-            }
-
-            /* Check that the address that we are supposed to write to is within our allowed region */
-            if( ((c->arg[0]+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (c->arg[0] < start_addr) ) {
-                /* Disallow write */
-                dont_ack = 1;
-                c->cmd = CMD_NACK;
-                UsbSendPacket(packet, len);
-            } else {
-                /* Translate address to flash page and do flash, update here for the 512k part */
-                AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY |
-                    MC_FLASH_COMMAND_PAGEN((c->arg[0]-(int)&_flash_start)/AT91C_IFLASH_PAGE_SIZE) |
-                    AT91C_MC_FCMD_START_PROG;
-            }
-
-            uint32_t sr;
-
-            while(!((sr = AT91C_BASE_EFC0->EFC_FSR) & MC_FLASH_STATUS_READY))
-                ;
-            if(sr & (MC_FLASH_STATUS_LOCKE | MC_FLASH_STATUS_PROGE)) {
-                   dont_ack = 1;
-                    c->cmd = CMD_NACK;
-                    UsbSendPacket(packet, len);
-            }
-            break;
-
-        case CMD_HARDWARE_RESET:
-            USB_D_PLUS_PULLUP_OFF();
-            AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
-            break;
-
-        case CMD_START_FLASH:
-            if(c->arg[2] == START_FLASH_MAGIC) bootrom_unlocked = 1;
-            else bootrom_unlocked = 0;
-            {
-                int prot_start = (int)&_bootrom_start;
-                int prot_end = (int)&_bootrom_end;
-                int allow_start = (int)&_flash_start;
-                int allow_end = (int)&_flash_end;
-                int cmd_start = c->arg[0];
-                int cmd_end = c->arg[1];
-
-                /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected
-                 * bootrom area. In any case they must be within the flash area.
-                 */
-                if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start)))
-                    && (cmd_start >= allow_start) && (cmd_end <= allow_end) ) {
-                    start_addr = cmd_start;
-                    end_addr = cmd_end;
-                } else {
-                    start_addr = end_addr = 0;
-                    dont_ack = 1;
-                    c->cmd = CMD_NACK;
-                    UsbSendPacket(packet, len);
-                }
-            }
-            break;
-
-        default:
-            Fatal();
-            break;
-    }
-
-    if(!dont_ack) {
-        c->cmd = CMD_ACK;
-        UsbSendPacket(packet, len);
-    }
+void UsbPacketReceived(uint8_t *packet, int len) {
+       int i, dont_ack=0;
+       UsbCommand* c = (UsbCommand *)packet;
+       volatile uint32_t *p;
+
+       if(len != sizeof(UsbCommand)) Fatal();
+  
+       uint32_t arg0 = (uint32_t)c->arg[0];
+  
+       switch(c->cmd) {
+               case CMD_DEVICE_INFO: {
+                       dont_ack = 1;
+                       arg0 = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM |
+                       DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH;
+                       if(common_area.flags.osimage_present)
+                               arg0 |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT;
+               
+                       cmd_send(CMD_DEVICE_INFO,arg0,1,2,0,0);
+               } break;
+      
+               case CMD_SETUP_WRITE: {
+                       /* The temporary write buffer of the embedded flash controller is mapped to the
+                       * whole memory region, only the last 8 bits are decoded.
+                       */
+                       p = (volatile uint32_t *)&_flash_start;
+                       for(i = 0; i < 12; i++)
+                               p[i+arg0] = c->d.asDwords[i];
+               } break;
+      
+               case CMD_FINISH_WRITE: {
+                       uint32_t* flash_mem = (uint32_t*)(&_flash_start);
+                       for ( int j=0; j<2; j++) {
+                               for(i = 0+(64*j); i < 64+(64*j); i++) {
+                                       flash_mem[i] = c->d.asDwords[i];
+                               }
+        
+                               uint32_t flash_address = arg0 + (0x100*j);
+        
+                               /* Check that the address that we are supposed to write to is within our allowed region */
+                               if( ((flash_address+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (flash_address < start_addr) ) {
+                                       /* Disallow write */
+                                       dont_ack = 1;
+                                       cmd_send(CMD_NACK,0,0,0,0,0);
+                               } else {
+                                       uint32_t page_n = (flash_address - ((uint32_t)flash_mem)) / AT91C_IFLASH_PAGE_SIZE;
+                                       /* Translate address to flash page and do flash, update here for the 512k part */
+                                       AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY |
+                                       MC_FLASH_COMMAND_PAGEN(page_n) |
+                                       AT91C_MC_FCMD_START_PROG;
+                               }
+        
+                               // Wait until flashing of page finishes
+                               uint32_t sr;
+                               while(!((sr = AT91C_BASE_EFC0->EFC_FSR) & AT91C_MC_FRDY));
+                                       if(sr & (AT91C_MC_LOCKE | AT91C_MC_PROGE)) {
+                                               dont_ack = 1;
+                                               cmd_send(CMD_NACK,sr,0,0,0,0);
+                                       }
+                       }
+               } break;
+      
+               case CMD_HARDWARE_RESET: {
+                       usb_disable();
+                       AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
+               } break;
+      
+               case CMD_START_FLASH: {
+                       if(c->arg[2] == START_FLASH_MAGIC) 
+                               bootrom_unlocked = 1;
+                       else 
+                               bootrom_unlocked = 0;
+               
+                       int prot_start = (int)&_bootrom_start;
+                       int prot_end = (int)&_bootrom_end;
+                       int allow_start = (int)&_flash_start;
+                       int allow_end = (int)&_flash_end;
+                       int cmd_start = c->arg[0];
+                       int cmd_end = c->arg[1];
+
+                       /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected
+                       * bootrom area. In any case they must be within the flash area.
+                       */
+                       if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start))) &&
+                               (cmd_start >= allow_start) && 
+                               (cmd_end <= allow_end) ) {
+                               start_addr = cmd_start;
+                               end_addr = cmd_end;
+                       } else {
+                               start_addr = end_addr = 0;
+                               dont_ack = 1;
+                               cmd_send(CMD_NACK,0,0,0,0,0);
+                       }
+               } break;
+      
+               default: {
+                       Fatal();
+               } break;
+       }
+  
+       if(!dont_ack)
+               cmd_send(CMD_ACK,arg0,0,0,0,0);

 }
 
 static void flash_mode(int externally_entered)
 }
 
 static void flash_mode(int externally_entered)


@@ -177,19 +195,29 @@ static void flash_mode(int externally_entered)
        start_addr = 0;
        end_addr = 0;
        bootrom_unlocked = 0;
        start_addr = 0;
        end_addr = 0;
        bootrom_unlocked = 0;

+       byte_t rx[sizeof(UsbCommand)];
+       size_t rx_len;
+
+       usb_enable();
+       for (volatile size_t i=0; i<0x100000; i++)
+               ;

 
 

-       UsbStart();

        for(;;) {
                WDT_HIT();
 
        for(;;) {
                WDT_HIT();
 

-               UsbPoll(TRUE);
+               if (usb_poll()) {
+                       rx_len = usb_read(rx,sizeof(UsbCommand));
+                       if (rx_len)
+                               UsbPacketReceived(rx,rx_len);
+               }

 
                if(!externally_entered && !BUTTON_PRESS()) {
                        /* Perform a reset to leave flash mode */
 
                if(!externally_entered && !BUTTON_PRESS()) {
                        /* Perform a reset to leave flash mode */

-                       USB_D_PLUS_PULLUP_OFF();
+                       usb_disable();

                        LED_B_ON();
                        AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;
                        LED_B_ON();
                        AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST;

-                       for(;;);
+                       for(;;)
+                               ;

                }
                if(externally_entered && BUTTON_PRESS()) {
                        /* Let the user's button press override the automatic leave */
                }
                if(externally_entered && BUTTON_PRESS()) {
                        /* Let the user's button press override the automatic leave */


@@ -198,7 +226,7 @@ static void flash_mode(int externally_entered)
        }
 }
 
        }
 }
 

-extern char _osimage_entry;
+extern uint32_t _osimage_entry;

 void BootROM(void)
 {
     //------------
 void BootROM(void)
 {
     //------------


@@ -242,25 +270,16 @@ void BootROM(void)
                GPIO_LED_C                      |
                GPIO_LED_D;
 
                GPIO_LED_C                      |
                GPIO_LED_D;
 

-    USB_D_PLUS_PULLUP_OFF();
-    LED_D_OFF();
-    LED_C_ON();
-    LED_B_OFF();
-    LED_A_OFF();
-
-    // if 512K FLASH part - TODO make some defines :)
-    if ((AT91C_BASE_DBGU->DBGU_CIDR | 0xf00) == 0xa00) {
-           AT91C_BASE_EFC0->EFC_FMR =
-               MC_FLASH_MODE_FLASH_WAIT_STATES(1) |
-                       MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);
-           AT91C_BASE_EFC1->EFC_FMR =
-               MC_FLASH_MODE_FLASH_WAIT_STATES(1) |
-                       MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48);
-    } else {
-           AT91C_BASE_EFC0->EFC_FMR =
-               MC_FLASH_MODE_FLASH_WAIT_STATES(0) |
-                       MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);
-    }
+//    USB_D_PLUS_PULLUP_OFF();
+       usb_disable();
+       LED_D_OFF();
+       LED_C_ON();
+       LED_B_OFF();
+       LED_A_OFF();
+
+       AT91C_BASE_EFC0->EFC_FMR =
+               AT91C_MC_FWS_1FWS |
+               MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48);

 
     // Initialize all system clocks
     ConfigClocks();
 
     // Initialize all system clocks
     ConfigClocks();


@@ -283,9 +302,11 @@ void BootROM(void)
 
     if(!common_area_present){
            /* Common area not ok, initialize it */
 
     if(!common_area_present){
            /* Common area not ok, initialize it */

-           int i; for(i=0; i<sizeof(common_area); i++) { /* Makeshift memset, no need to drag util.c into this */
+           int i; 
+               /* Makeshift memset, no need to drag util.c into this */
+               for(i=0; i<sizeof(common_area); i++) 

                    ((char*)&common_area)[i] = 0;
                    ((char*)&common_area)[i] = 0;

-           }
+           

            common_area.magic = COMMON_AREA_MAGIC;
            common_area.version = 1;
            common_area.flags.bootrom_present = 1;
            common_area.magic = COMMON_AREA_MAGIC;
            common_area.version = 1;
            common_area.flags.bootrom_present = 1;


@@ -297,10 +318,10 @@ void BootROM(void)
            flash_mode(1);
     } else if(BUTTON_PRESS()) {
            flash_mode(0);
            flash_mode(1);
     } else if(BUTTON_PRESS()) {
            flash_mode(0);

-    } else if(*(uint32_t*)&_osimage_entry == 0xffffffffU) {
+    } else if(_osimage_entry == 0xffffffffU) {

            flash_mode(1);
     } else {
            // jump to Flash address of the osimage entry point (LSBit set for thumb mode)
            flash_mode(1);
     } else {
            // jump to Flash address of the osimage entry point (LSBit set for thumb mode)

-           asm("bx %0\n" : : "r" ( ((int)&_osimage_entry) | 0x1 ) );
+           __asm("bx %0\n" : : "r" ( ((int)&_osimage_entry) | 0x1 ) );

     }
 }
     }
 }