APP_INCLUDES = apps.h
#remove one of the following defines and comment out the relevant line
-#in the next section to remove that particular feature from compilation
-APP_CFLAGS = -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE \
+#in the next section to remove that particular feature from compilation
+APP_CFLAGS = -DWITH_ISO14443a_StandAlone -DWITH_LF -DWITH_ISO15693 -DWITH_ISO14443a -DWITH_ISO14443b -DWITH_ICLASS -DWITH_LEGICRF -DWITH_HITAG -DWITH_CRC -DON_DEVICE -DWITH_HFSNOOP \
-fno-strict-aliasing -ffunction-sections -fdata-sections
-#-DWITH_LCD
+#-DWITH_LCD
#SRC_LCD = fonts.c LCD.c
-SRC_LF = lfops.c hitag2.c lfsampling.c
+SRC_LF = lfops.c hitag2.c hitagS.c lfsampling.c pcf7931.c lfdemod.c protocols.c
SRC_ISO15693 = iso15693.c iso15693tools.c
SRC_ISO14443a = epa.c iso14443a.c mifareutil.c mifarecmd.c mifaresniff.c
-SRC_ISO14443b = iso14443.c
-SRC_CRAPTO1 = crapto1.c crypto1.c des.c aes.c
+SRC_ISO14443b = iso14443b.c
+SRC_CRAPTO1 = crapto1.c crypto1.c des.c aes.c
SRC_CRC = iso14443crc.c crc.c crc16.c crc32.c
#the FPGA bitstream files. Note: order matters!
#the zlib source files required for decompressing the fpga config at run time
SRC_ZLIB = inflate.c inffast.c inftrees.c adler32.c zutil.c
#additional defines required to compile zlib
-ZLIB_CFLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP
+ZLIB_CFLAGS = -DZ_SOLO -DZ_PREFIX -DNO_GZIP -DZLIB_PM3_TUNED
APP_CFLAGS += $(ZLIB_CFLAGS)
# zlib includes:
APP_CFLAGS += -I../zlib
# These are to be compiled in ARM mode
ARMSRC = fpgaloader.c \
legicrf.c \
- lfdemod.c \
$(SRC_ISO14443a) \
$(SRC_ISO14443b) \
$(SRC_CRAPTO1) \
legic_prng.c \
iclass.c \
BigBuf.c \
- optimized_cipher.c
+ optimized_cipher.c \
+ hfsnoop.c
# Do not move this inclusion before the definition of {THUMB,ASM,ARM}SRC
include ../common/Makefile.common
-OBJS = $(OBJDIR)/osimage.s19
+OBJS = $(OBJDIR)/fullimage.s19
FPGA_COMPRESSOR = ../client/fpga_compress
all: $(OBJS)
+.DELETE_ON_ERROR:
+
$(OBJDIR)/fpga_all.o: $(OBJDIR)/fpga_all.bit.z
$(OBJCOPY) -O elf32-littlearm -I binary -B arm --prefix-sections=fpga_all_bit $^ $@
$(OBJDIR)/fpga_all.bit.z: $(FPGA_BITSTREAMS) $(FPGA_COMPRESSOR)
- $(FPGA_COMPRESSOR) $(filter %.bit,$^) $@
+ $(FPGA_COMPRESSOR) $(filter %.bit,$^) $@
+
+$(FPGA_COMPRESSOR):
+ make -C ../client $(notdir $(FPGA_COMPRESSOR))
-$(OBJDIR)/fullimage.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_all.o $(THUMBOBJ) $(ARMOBJ)
+$(OBJDIR)/fullimage.stage1.elf: $(VERSIONOBJ) $(OBJDIR)/fpga_all.o $(THUMBOBJ) $(ARMOBJ)
$(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^ $(LIBS)
+$(OBJDIR)/fullimage.nodata.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --remove-section .data $^ $@
+
+$(OBJDIR)/fullimage.nodata.o: $(OBJDIR)/fullimage.nodata.bin
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=stage1_image $^ $@
+
+$(OBJDIR)/fullimage.data.bin: $(OBJDIR)/fullimage.stage1.elf
+ $(OBJCOPY) -O binary -I elf32-littlearm --only-section .data $^ $@
+
+$(OBJDIR)/fullimage.data.bin.z: $(OBJDIR)/fullimage.data.bin $(FPGA_COMPRESSOR)
+ $(FPGA_COMPRESSOR) $(filter %.bin,$^) $@
+
+$(OBJDIR)/fullimage.data.o: $(OBJDIR)/fullimage.data.bin.z
+ $(OBJCOPY) -O elf32-littlearm -I binary -B arm --rename-section .data=compressed_data $^ $@
+
+$(OBJDIR)/fullimage.elf: $(OBJDIR)/fullimage.nodata.o $(OBJDIR)/fullimage.data.o
+ $(CC) $(LDFLAGS) -Wl,-T,ldscript,-Map,$(patsubst %.elf,%.map,$@) -o $@ $^
+
tarbin: $(OBJS)
$(TAR) $(TARFLAGS) ../proxmark3-$(platform)-bin.tar $(OBJS:%=armsrc/%) $(OBJS:%.s19=armsrc/%.elf)
$(DELETE) $(OBJDIR)$(PATHSEP)*.map
$(DELETE) $(OBJDIR)$(PATHSEP)*.d
$(DELETE) $(OBJDIR)$(PATHSEP)*.z
+ $(DELETE) $(OBJDIR)$(PATHSEP)*.bin
$(DELETE) version.c
.PHONY: all clean help