- } else {
- PrintAndLog("Command execute timeout");
- }
-
-
- //memcpy(CCNR,CC_temp,8);
- des_setkey_enc( &ctx_enc, KEY);
- des_crypt_ecb(&ctx_enc,CSN,result);
- PrintAndLog("DES Key: %s",sprint_hex(result,8));
- uint64_t newz=0;
- crypted_id = bytes_to_num(result,8);
- uint64_t x = (crypted_id & 0xFFFF000000000000 );
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,0),7);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,1),6);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,2),5);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,3),4);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,4),3);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,5),2);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,6),1);
- pushbackSixBitByte(&newz, getSixBitByte(crypted_id,7),0);
- newz|= x;
- crypted_id=newz;
- num_to_bytes(crypted_id,8,result);
- PrintAndLog("DESr Key: %s",sprint_hex(result,8));
- hash0(crypted_id,div_key);
- PrintAndLog("Div Key: %s",sprint_hex(div_key,8));
- calc_iclass_mac(CCNR,12,div_key,MAC);
-
- UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
- memcpy(d.d.asBytes, MAC, 4);
- SendCommand(&d);
-
- return 0;
+
+ if(isOK > 0)
+ {
+ PrintAndLog("CSN: %s",sprint_hex(CSN,8));
+ }
+ if(isOK <= 1){
+ PrintAndLog("Failed to obtain CC! Aborting");
+ return 0;
+ }
+ //Status 2 or higher
+
+ if(elite)
+ {
+ //Get the key index (hash1)
+ uint8_t key_index[8] = {0};
+
+ hash1(CSN, key_index);
+ printvar("hash1", key_index,8);
+ for(i = 0; i < 8 ; i++)
+ key_sel[i] = keytable[key_index[i]] & 0xFF;
+ PrintAndLog("Pre-fortified 'permuted' HS key that would be needed by an iclass reader to talk to above CSN:");
+ printvar("k_sel", key_sel,8);
+ //Permute from iclass format to standard format
+ permutekey_rev(key_sel,key_sel_p);
+ used_key = key_sel_p;
+ }else{
+ used_key = KEY;
+ }
+
+ PrintAndLog("Pre-fortified key that would be needed by the OmniKey reader to talk to above CSN:");
+ printvar("Used key",used_key,8);
+ diversifyKey(CSN,used_key, div_key);
+ PrintAndLog("Hash0, a.k.a diversified key, that is computed using Ksel and stored in the card (Block 3):");
+ printvar("Div key", div_key, 8);
+ printvar("CC_NR:",CCNR,12);
+ doMAC(CCNR,div_key, MAC);
+ printvar("MAC", MAC, 4);
+
+ uint8_t iclass_data[32000] = {0};
+ uint32_t iclass_datalen = 0;
+ uint32_t iclass_blocksFailed = 0;//Set to 1 if dump was incomplete
+
+ UsbCommand d = {CMD_READER_ICLASS_REPLAY, {readerType}};
+ memcpy(d.d.asBytes, MAC, 4);
+ clearCommandBuffer();
+ SendCommand(&d);
+ PrintAndLog("Waiting for device to dump data. Press button on device and key on keyboard to abort...");
+ while (true) {
+ printf(".");
+ if (ukbhit()) {
+ getchar();
+ printf("\naborted via keyboard!\n");
+ break;
+ }
+ if(WaitForResponseTimeout(CMD_ACK,&resp,4500))
+ {
+ uint32_t dataLength = resp.arg[0];
+ iclass_blocksFailed |= resp.arg[1];
+ if(dataLength > 0)
+ {
+ PrintAndLog("Got %d bytes data (total so far %d)" ,dataLength,iclass_datalen);
+ memcpy(iclass_data, resp.d.asBytes,dataLength);
+ iclass_datalen += dataLength;
+ }else
+ {//Last transfer, datalength 0 means the dump is finished
+ PrintAndLog("Dumped %d bytes of data from tag. ", iclass_datalen);
+ if(iclass_blocksFailed)
+ {
+ PrintAndLog("OBS! Some blocks failed to be dumped correctly!");
+ }
+ if(iclass_datalen > 0)
+ {
+ char filename[100] = {0};
+ //create a preferred filename
+ snprintf(filename, 100,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x",
+ CSN[0],CSN[1],CSN[2],CSN[3],
+ CSN[4],CSN[5],CSN[6],CSN[7]);
+ //Place the div_key in block 3
+ memcpy(iclass_data+(3*8), div_key, 8);
+ saveFile(filename,"bin",iclass_data, iclass_datalen );
+ }
+ //Aaaand we're finished
+ return 0;
+ }
+ }
+ }
+
+
+ return 0;
+}
+
+int hf_iclass_eload_usage()
+{
+ PrintAndLog("Loads iclass tag-dump into emulator memory on device");
+ PrintAndLog("Usage: hf iclass eload f <filename>");
+ PrintAndLog("");
+ PrintAndLog("Example: hf iclass eload f iclass_tagdump-aa162d30f8ff12f1.bin");
+ return 0;
+
+}
+
+int iclassEmlSetMem(uint8_t *data, int blockNum, int blocksCount) {
+ UsbCommand c = {CMD_MIFARE_EML_MEMSET, {blockNum, blocksCount, 0}};
+ memcpy(c.d.asBytes, data, blocksCount * 16);
+ SendCommand(&c);
+ return 0;
+}
+int CmdHFiClassELoad(const char *Cmd)
+{
+
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return hf_iclass_eload_usage();
+
+ //File handling and reading
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename) > 0)
+ {
+ f = fopen(filename, "rb");
+ }else{
+ return hf_iclass_eload_usage();
+ }
+
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+
+ uint8_t *dump = malloc(fsize);
+
+
+ size_t bytes_read = fread(dump, 1, fsize, f);
+ fclose(f);
+
+ printIclassDumpInfo(dump);
+ //Validate
+
+ if (bytes_read < fsize)
+ {
+ prnlog("Error, could only read %d bytes (should be %d)",bytes_read, fsize );
+ free(dump);
+ return 1;
+ }
+ //Send to device
+ uint32_t bytes_sent = 0;
+ uint32_t bytes_remaining = bytes_read;
+
+ while(bytes_remaining > 0){
+ uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);
+ UsbCommand c = {CMD_ICLASS_EML_MEMSET, {bytes_sent,bytes_in_packet,0}};
+ memcpy(c.d.asBytes, dump, bytes_in_packet);
+ SendCommand(&c);
+ bytes_remaining -= bytes_in_packet;
+ bytes_sent += bytes_in_packet;
+ }
+ free(dump);
+ PrintAndLog("Sent %d bytes of data to device emulator memory", bytes_sent);
+ return 0;
+}
+
+int usage_hf_iclass_decrypt()
+{
+ PrintAndLog("Usage: hf iclass decrypt f <tagdump> o ");
+ PrintAndLog("");
+ PrintAndLog("OBS! In order to use this function, the file 'iclass_decryptionkey.bin' must reside");
+ PrintAndLog("in the working directory. The file should be 16 bytes binary data");
+ PrintAndLog("");
+ PrintAndLog("example: hf iclass decrypt f tagdump_12312342343.bin");
+ PrintAndLog("");
+ PrintAndLog("OBS! This is pretty stupid implementation, it tries to decrypt every block after block 6. ");
+ PrintAndLog("Correct behaviour would be to decrypt only the application areas where the key is valid,");
+ PrintAndLog("which is defined by the configuration block.");
+ return 1;
+}
+
+int readKeyfile(const char *filename, size_t len, uint8_t* buffer)
+{
+ FILE *f = fopen(filename, "rb");
+ if(!f) {
+ PrintAndLog("Failed to read from file '%s'", filename);
+ return 1;
+ }
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ size_t bytes_read = fread(buffer, 1, len, f);
+ fclose(f);
+ if(fsize != len)
+ {
+ PrintAndLog("Warning, file size is %d, expected %d", fsize, len);
+ return 1;
+ }
+ if(bytes_read != len)
+ {
+ PrintAndLog("Warning, could only read %d bytes, expected %d" ,bytes_read, len);
+ return 1;
+ }
+ return 0;
+}
+
+int CmdHFiClassDecrypt(const char *Cmd)
+{
+ uint8_t key[16] = { 0 };
+ if(readKeyfile("iclass_decryptionkey.bin", 16, key))
+ {
+ usage_hf_iclass_decrypt();
+ return 1;
+ }
+ PrintAndLog("Decryption file found... ");
+ char opt = param_getchar(Cmd, 0);
+ if (strlen(Cmd)<1 || opt == 'h')
+ return usage_hf_iclass_decrypt();
+
+ //Open the tagdump-file
+ FILE *f;
+ char filename[FILE_PATH_SIZE];
+ if(opt == 'f' && param_getstr(Cmd, 1, filename) > 0)
+ {
+ f = fopen(filename, "rb");
+ }else{
+ return usage_hf_iclass_decrypt();
+ }
+
+ fseek(f, 0, SEEK_END);
+ long fsize = ftell(f);
+ fseek(f, 0, SEEK_SET);
+ uint8_t enc_dump[8] = {0};
+ uint8_t *decrypted = malloc(fsize);
+ des3_context ctx = { DES_DECRYPT ,{ 0 } };
+ des3_set2key_dec( &ctx, key);
+ size_t bytes_read = fread(enc_dump, 1, 8, f);
+
+ //Use the first block (CSN) for filename
+ char outfilename[FILE_PATH_SIZE] = { 0 };
+ snprintf(outfilename,FILE_PATH_SIZE,"iclass_tagdump-%02x%02x%02x%02x%02x%02x%02x%02x-decrypted",
+ enc_dump[0],enc_dump[1],enc_dump[2],enc_dump[3],
+ enc_dump[4],enc_dump[5],enc_dump[6],enc_dump[7]);
+
+ size_t blocknum =0;
+ while(bytes_read == 8)
+ {
+ if(blocknum < 7)
+ {
+ memcpy(decrypted+(blocknum*8), enc_dump, 8);
+ }else{
+ des3_crypt_ecb(&ctx, enc_dump,decrypted +(blocknum*8) );
+ }
+ printvar("decrypted block", decrypted +(blocknum*8), 8);
+ bytes_read = fread(enc_dump, 1, 8, f);
+ blocknum++;
+ }
+ fclose(f);
+
+ saveFile(outfilename,"bin", decrypted, blocknum*8);
+
+ return 0;
projects / proxmark3-svn / blobdiff