X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/0892b968ceaacda1b295ba7afa4553b48479f9eb..40148ab609cdcf58ae6ef517c319a758006e1c6d:/armsrc/lfops.c?ds=sidebyside

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index 7b6fa97a..780af199 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -15,130 +15,44 @@
 #include "crc16.h"
 #include "string.h"
 #include "lfdemod.h"
+#include "lfsampling.h"
 
 
 /**
-* Does the sample acquisition. If threshold is specified, the actual sampling
-* is not commenced until the threshold has been reached.
-* @param trigger_threshold - the threshold
-* @param silent - is true, now outputs are made. If false, dbprints the status
-*/
-void DoAcquisition125k_internal(int trigger_threshold,bool silent)
-{
-    uint8_t *dest = BigBuf_get_addr();
-    int n = BigBuf_max_traceLen();
-    int i;
-
-    memset(dest, 0, n);
-    i = 0;
-    for(;;) {
-        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
-            AT91C_BASE_SSC->SSC_THR = 0x43;
-            LED_D_ON();
-        }
-        if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
-            dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-            LED_D_OFF();
-            if (trigger_threshold != -1 && dest[i] < trigger_threshold)
-                continue;
-            else
-                trigger_threshold = -1;
-            if (++i >= n) break;
-        }
-    }
-    if(!silent)
-    {
-        Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
-                 dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
-
-    }
-}
-/**
-* Perform sample aquisition.
-*/
-void DoAcquisition125k(int trigger_threshold)
-{
-    DoAcquisition125k_internal(trigger_threshold, false);
-}
-
-/**
-* Setup the FPGA to listen for samples. This method downloads the FPGA bitstream
-* if not already loaded, sets divisor and starts up the antenna.
-* @param divisor : 1, 88> 255 or negative ==> 134.8 KHz
-* 				   0 or 95 ==> 125 KHz
-*
-**/
-void LFSetupFPGAForADC(int divisor, bool lf_field)
-{
-    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-    if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-    else if (divisor == 0)
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-    else
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
-
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
-
-    // Connect the A/D to the peak-detected low-frequency path.
-    SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-    // Give it a bit of time for the resonant antenna to settle.
-    SpinDelay(50);
-    // Now set up the SSC to get the ADC samples that are now streaming at us.
-    FpgaSetupSsc();
-}
-/**
-* Initializes the FPGA, and acquires the samples.
-**/
-void AcquireRawAdcSamples125k(int divisor)
-{
-    LFSetupFPGAForADC(divisor, true);
-    // Now call the acquisition routine
-    DoAcquisition125k_internal(-1,false);
-}
-/**
-* Initializes the FPGA for snoop-mode, and acquires the samples.
-**/
-
-void SnoopLFRawAdcSamples(int divisor, int trigger_threshold)
-{
-    LFSetupFPGAForADC(divisor, false);
-    DoAcquisition125k(trigger_threshold);
-}
-
+ * Function to do a modulation and then get samples.
+ * @param delay_off
+ * @param period_0
+ * @param period_1
+ * @param command
+ */
 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
 
-    /* Make sure the tag is reset */
-    FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-    SpinDelay(2500);
-
-
     int divisor_used = 95; // 125 KHz
     // see if 'h' was specified
 
     if (command[strlen((char *) command) - 1] == 'h')
         divisor_used = 88; // 134.8 KHz
 
+	sample_config sc = { 0,0,1, divisor_used, 0};
+	setSamplingConfig(&sc);
 
-    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
-    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
-    // Give it a bit of time for the resonant antenna to settle.
-    SpinDelay(50);
+	/* Make sure the tag is reset */
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	SpinDelay(2500);
 
-    // And a little more time for the tag to fully power up
-    SpinDelay(2000);
+	LFSetupFPGAForADC(sc.divisor, 1);
 
-    // Now set up the SSC to get the ADC samples that are now streaming at us.
-    FpgaSetupSsc();
+	// And a little more time for the tag to fully power up
+	SpinDelay(2000);
 
     // now modulate the reader field
     while(*command != '\0' && *command != ' ') {
         FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
         LED_D_OFF();
         SpinDelayUs(delay_off);
-        FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
 
         FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
         LED_D_ON();
@@ -150,14 +64,16 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
     FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
     LED_D_OFF();
     SpinDelayUs(delay_off);
-    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used);
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, sc.divisor);
 
     FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
     // now do the read
-    DoAcquisition125k(-1);
+	DoAcquisition_config(false);
 }
 
+
+
 /* blank r/w tag data stream
 ...0000000000000000 01111111
 1010101010101010101010101010101010101010101010101010101010101010
@@ -478,8 +394,8 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
     AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
     AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
 
-#define SHORT_COIL()	LOW(GPIO_SSC_DOUT)
-#define OPEN_COIL()		HIGH(GPIO_SSC_DOUT)
+ #define SHORT_COIL()	LOW(GPIO_SSC_DOUT)
+ #define OPEN_COIL()		HIGH(GPIO_SSC_DOUT)
 
     i = 0;
     for(;;) {
@@ -501,7 +417,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 
         if (ledcontrol)
             LED_D_OFF();
-
+        //wait for next sample time
         while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
             if(BUTTON_PRESS()) {
                 DbpString("Stopped");
@@ -526,8 +442,9 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
 {
 }
 
-// compose fc/8 fc/10 waveform
-static void fc(int c, int *n) {
+// compose fc/8 fc/10 waveform (FSK2)
+static void fc(int c, int *n)
+{
     uint8_t *dest = BigBuf_get_addr();
     int idx;
 
@@ -535,20 +452,21 @@ static void fc(int c, int *n) {
     if(c==0) {
         dest[((*n)++)]=1;
         dest[((*n)++)]=1;
-        dest[((*n)++)]=0;
-        dest[((*n)++)]=0;
+        dest[((*n)++)]=1;
+        dest[((*n)++)]=1;
         dest[((*n)++)]=0;
         dest[((*n)++)]=0;
         dest[((*n)++)]=0;
         dest[((*n)++)]=0;
     }
+  
     //	an fc/8  encoded bit is a bit pattern of  11000000  x6 = 48 samples
     if(c==8) {
         for (idx=0; idx<6; idx++) {
             dest[((*n)++)]=1;
             dest[((*n)++)]=1;
-            dest[((*n)++)]=0;
-            dest[((*n)++)]=0;
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=1;
             dest[((*n)++)]=0;
             dest[((*n)++)]=0;
             dest[((*n)++)]=0;
@@ -559,6 +477,8 @@ static void fc(int c, int *n) {
     //	an fc/10 encoded bit is a bit pattern of 1110000000 x5 = 50 samples
     if(c==10) {
         for (idx=0; idx<5; idx++) {
+            dest[((*n)++)]=1;
+            dest[((*n)++)]=1;
             dest[((*n)++)]=1;
             dest[((*n)++)]=1;
             dest[((*n)++)]=1;
@@ -567,8 +487,37 @@ static void fc(int c, int *n) {
             dest[((*n)++)]=0;
             dest[((*n)++)]=0;
             dest[((*n)++)]=0;
-            dest[((*n)++)]=0;
-            dest[((*n)++)]=0;
+        }
+    }
+}
+// compose fc/X fc/Y waveform (FSKx)
+static void fcAll(uint8_t c, int *n, uint8_t clock) 
+{
+    uint8_t *dest = BigBuf_get_addr();
+    uint8_t idx;
+    uint8_t fcCnt;
+    // c = count of field clock for this bit
+
+    int mod = clock % c;
+    // loop through clock - step field clock
+    for (idx=0; idx < (uint8_t) clock/c; idx++){
+        // loop through field clock length - put 1/2 FC length 1's and 1/2 0's per field clock wave (to create the wave)
+        for (fcCnt=0; fcCnt < c; fcCnt++){
+            if (fcCnt < c/2){
+                dest[((*n)++)]=1;
+            } else {
+                dest[((*n)++)]=0;    
+            }
+        }
+    }
+    Dbprintf("mod: %d",mod);
+    if (mod>0){ //for FC counts that don't add up to a full clock cycle padd with extra wave
+        for (idx=0; idx < mod; idx++){
+            if (idx < mod/2) {
+                dest[((*n)++)]=1;
+            } else {
+                dest[((*n)++)]=0;
+            }
         }
     }
 }
@@ -629,6 +578,114 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
         LED_A_OFF();
 }
 
+// prepare a waveform pattern in the buffer based on the ID given then
+// simulate a FSK tag until the button is pressed
+// arg1 contains fcHigh and fcLow, arg2 contains invert and clock
+void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
+{
+    int ledcontrol=1;
+    int n=0, i=0;
+    uint8_t fcHigh = arg1 >> 8;
+    uint8_t fcLow = arg1 & 0xFF;
+    //spacer bit
+    uint8_t clk = arg2 & 0xFF;
+    uint8_t invert = (arg2 >> 8) & 1;
+    //fcAll(0, &n, clk);
+    
+    WDT_HIT();
+    for (i=0; i<size; i++){
+        //if ((i%4==3) fcAll(0,&n));
+        if (BitStream[i] == invert){
+            fcAll(fcLow, &n, clk);
+        } else {
+            fcAll(fcHigh, &n, clk);
+        }
+    }
+    Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n);
+    //Dbprintf("First 64:");
+    //uint8_t *dest = BigBuf_get_addr();
+    //i=0;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+    //i+=16;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+    //i+=16;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+    //i+=16;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+           
+    if (ledcontrol)
+        LED_A_ON();
+    SimulateTagLowFrequency(n, 0, ledcontrol);
+
+    if (ledcontrol)
+        LED_A_OFF();
+}
+
+// compose ask waveform for one bit(ASK)
+static void askSimBit(uint8_t c, int *n, uint8_t clock, uint8_t manchester) 
+{
+    uint8_t *dest = BigBuf_get_addr();
+    uint8_t idx;
+    // c = current bit 1 or 0
+    int i = 0;
+    // for when we want a separator
+    if (c==2) { //separator
+        for (i=0; i<clock/2; i++){
+            dest[((*n)++)]=0;
+        }
+    } else {
+        if (manchester){
+            for (idx=0; idx < (uint8_t) clock/2; idx++){
+                dest[((*n)++)]=c;    
+            }
+            for (idx=0; idx < (uint8_t) clock/2; idx++){
+                dest[((*n)++)]=c^1;    
+            }
+        } else {
+            for (idx=0; idx < (uint8_t) clock; idx++){
+                dest[((*n)++)]=c;    
+            }
+        }        
+    }
+}
+
+// args clock, ask/man or askraw, invert, transmission separator
+void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream)
+{
+    int ledcontrol = 1;
+    int n=0, i=0;
+    uint8_t clk = (arg1 >> 8) & 0xFF;
+    uint8_t manchester = arg1 & 1;
+    uint8_t separator = arg2 & 1;
+    uint8_t invert = (arg2 >> 8) & 1;
+    WDT_HIT();
+    for (i=0; i<size; i++){
+        askSimBit(BitStream[i]^invert, &n, clk, manchester);
+    }
+    if (separator==1) Dbprintf("sorry but separator option not yet available"); //askSimBit(2, &n, clk, manchester);
+
+    Dbprintf("Simulating with clk: %d, invert: %d, manchester: %d, separator: %d, n: %d",clk, invert, manchester, separator, n);
+    //DEBUG
+    //Dbprintf("First 64:");
+    //uint8_t *dest = BigBuf_get_addr();
+    //i=0;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+    //i+=16;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+    //i+=16;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+    //i+=16;
+    //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]);
+
+
+    if (ledcontrol)
+        LED_A_ON();
+    SimulateTagLowFrequency(n, 0, ledcontrol);
+
+    if (ledcontrol)
+        LED_A_OFF();
+}
+
 // loop to get raw HID waveform then FSK demodulate the TAG ID from it
 void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 {
@@ -645,8 +702,8 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
 
-        DoAcquisition125k_internal(-1,true);
-        // FSK demodulator
+		DoAcquisition_default(-1,true);
+		// FSK demodulator
         size = sizeOfBigBuff;  //variable size will change after demod so re initialize it before use
 		idx = HIDdemodFSK(dest, &size, &hi2, &hi, &lo);
         
@@ -724,7 +781,7 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
     uint8_t *dest = BigBuf_get_addr();
 
 	size_t size=0, idx=0;
-    int clk=0, invert=0, errCnt=0;
+    int clk=0, invert=0, errCnt=0, maxErr=20;
     uint64_t lo=0;
     // Configure to go in 125Khz listen mode
     LFSetupFPGAForADC(95, true);
@@ -734,11 +791,11 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol)
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
 
-        DoAcquisition125k_internal(-1,true);
-        size  = BigBuf_max_traceLen();
+		DoAcquisition_default(-1,true);
+		size  = BigBuf_max_traceLen();
         //Dbprintf("DEBUG: Buffer got");
 		//askdemod and manchester decode
-		errCnt = askmandemod(dest, &size, &clk, &invert);
+		errCnt = askmandemod(dest, &size, &clk, &invert, maxErr);
         //Dbprintf("DEBUG: ASK Got");
         WDT_HIT();
 
@@ -787,8 +844,8 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
     while(!BUTTON_PRESS()) {
         WDT_HIT();
         if (ledcontrol) LED_A_ON();
-        DoAcquisition125k_internal(-1,true);
-        //fskdemod and get start index
+		DoAcquisition_default(-1,true);
+		//fskdemod and get start index
         WDT_HIT();
         idx = IOdemodFSK(dest, BigBuf_max_traceLen());
         if (idx>0){
@@ -1394,7 +1451,9 @@ int DemodPCF7931(uint8_t **outBlocks) {
     int lmin=128, lmax=128;
     uint8_t dir;
 
-    AcquireRawAdcSamples125k(0);
+	LFSetupFPGAForADC(95, true);
+	DoAcquisition_default(0, 0);
+
 
     lmin = 64;
     lmax = 192;
@@ -1621,7 +1680,7 @@ void ReadPCF7931() {
         tries++;
         if (BUTTON_PRESS()) return;
     } while (num_blocks != max_blocks);
-end:
+ end:
     Dbprintf("-----------------------------------------");
     Dbprintf("Memory content:");
     Dbprintf("-----------------------------------------");