X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/125a98a1102cc27cefeba77f6d37542c1c475c52..e39a92bb1d876f880ad8cbea82921838422358e8:/client/flash.c

diff --git a/client/flash.c b/client/flash.c
index 4af0dea8..4e222ece 100644
--- a/client/flash.c
+++ b/client/flash.c
@@ -13,7 +13,6 @@
 #include <stdlib.h>
 #include "proxmark3.h"
 #include "sleep.h"
-//#include "proxusb.h"
 #include "flash.h"
 #include "elf.h"
 #include "proxendian.h"
@@ -276,7 +275,6 @@ static int get_proxmark_state(uint32_t *state)
 {
 	UsbCommand c;
 	c.cmd = CMD_DEVICE_INFO;
-//	SendCommand_(&c);
   SendCommand(&c);
 	UsbCommand resp;
 	ReceiveCommand(&resp);
@@ -306,7 +304,7 @@ static int get_proxmark_state(uint32_t *state)
 }
 
 // Enter the bootloader to be able to start flashing
-static int enter_bootloader(void)
+static int enter_bootloader(char *serial_port_name)
 {
 	uint32_t state;
 
@@ -337,14 +335,14 @@ static int enter_bootloader(void)
 			SendCommand(&c);
 			fprintf(stderr,"Press and hold down button NOW if your bootloader requires it.\n");
 		}
-		fprintf(stderr,"Waiting for Proxmark to reappear on USB...");
-
+    msleep(100);
 		CloseProxmark();
-		sleep(1);
-		while (!OpenProxmark(0)) {
+
+		fprintf(stderr,"Waiting for Proxmark to reappear on %s",serial_port_name);
+    do {
 			sleep(1);
 			fprintf(stderr, ".");
-		}
+		} while (!OpenProxmark(0));
 		fprintf(stderr," Found.\n");
 
 		return 0;
@@ -366,11 +364,11 @@ static int wait_for_ack(void)
 }
 
 // Go into flashing mode
-int flash_start_flashing(int enable_bl_writes)
+int flash_start_flashing(int enable_bl_writes,char *serial_port_name)
 {
 	uint32_t state;
 
-	if (enter_bootloader() < 0)
+	if (enter_bootloader(serial_port_name) < 0)
 		return -1;
 
 	if (get_proxmark_state(&state) < 0)
@@ -391,7 +389,6 @@ int flash_start_flashing(int enable_bl_writes)
 			c.arg[2] = 0;
 		}
 		SendCommand(&c);
-//		SendCommand_(&c);
 		return wait_for_ack();
 	} else {
 		fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
@@ -408,22 +405,8 @@ static int write_block(uint32_t address, uint8_t *data, uint32_t length)
 	memset(block_buf, 0xFF, BLOCK_SIZE);
 	memcpy(block_buf, data, length);
   UsbCommand c;
-/*
-	c.cmd = {CMD_SETUP_WRITE};
-	for (int i = 0; i < 240; i += 48) {
-		memcpy(c.d.asBytes, block_buf + i, 48);
-		c.arg[0] = i / 4;
-		SendCommand(&c);
-//		SendCommand_(&c);
-		if (wait_for_ack() < 0) {
-			return -1;
-    }
-	}
-*/
 	c.cmd = CMD_FINISH_WRITE;
 	c.arg[0] = address;
-//	memcpy(c.d.asBytes, block_buf+240, 16);
-//	SendCommand_(&c);
 	memcpy(c.d.asBytes, block_buf, length);
   SendCommand(&c);
   return wait_for_ack();
@@ -486,7 +469,7 @@ void flash_free(flash_file_t *ctx)
 // just reset the unit
 int flash_stop_flashing(void) {
 	UsbCommand c = {CMD_HARDWARE_RESET};
-//	SendCommand_(&c);
   SendCommand(&c);
+  msleep(100);
   return 0;
 }