X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/12d708fec157dfde6f94d61e5fdc265713a71578..42c235e7efdac01da7e7ef3e4e442557fe50198d:/armsrc/epa.c?ds=sidebyside diff --git a/armsrc/epa.c b/armsrc/epa.c index 9012bf11..16d90014 100644 --- a/armsrc/epa.c +++ b/armsrc/epa.c @@ -5,18 +5,18 @@ // at your option, any later version. See the LICENSE.txt file for the text of // the license. //----------------------------------------------------------------------------- -// Routines to support the German eletronic "Personalausweis" (ID card) +// Routines to support the German electronic "Personalausweis" (ID card) // Note that the functions which do not implement USB commands do NOT initialize // the card (with iso14443a_select_card etc.). If You want to use these // functions, You need to do the setup before calling them! //----------------------------------------------------------------------------- #include "iso14443a.h" +#include "iso14443b.h" #include "epa.h" -#include "../common/cmd.h" +#include "cmd.h" - -// Protocol and Parameter Selection Request +// Protocol and Parameter Selection Request for ISO 14443 type A cards // use regular (1x) speed in both directions // CRC is already included static const uint8_t pps[] = {0xD0, 0x11, 0x00, 0x52, 0xA6}; @@ -75,6 +75,54 @@ static const uint8_t oid_pace_start[] = { 0x04 // id-PACE }; +// APDUs for replaying: +// MSE: Set AT (initiate PACE) +static uint8_t apdu_replay_mse_set_at_pace[41]; +// General Authenticate (Get Nonce) +static uint8_t apdu_replay_general_authenticate_pace_get_nonce[8]; +// General Authenticate (Map Nonce) +static uint8_t apdu_replay_general_authenticate_pace_map_nonce[75]; +// General Authenticate (Mutual Authenticate) +static uint8_t apdu_replay_general_authenticate_pace_mutual_authenticate[75]; +// General Authenticate (Perform Key Agreement) +static uint8_t apdu_replay_general_authenticate_pace_perform_key_agreement[18]; +// pointers to the APDUs (for iterations) +static struct { + uint8_t len; + uint8_t *data; +} const apdus_replay[] = { + {sizeof(apdu_replay_mse_set_at_pace), apdu_replay_mse_set_at_pace}, + {sizeof(apdu_replay_general_authenticate_pace_get_nonce), apdu_replay_general_authenticate_pace_get_nonce}, + {sizeof(apdu_replay_general_authenticate_pace_map_nonce), apdu_replay_general_authenticate_pace_map_nonce}, + {sizeof(apdu_replay_general_authenticate_pace_mutual_authenticate), apdu_replay_general_authenticate_pace_mutual_authenticate}, + {sizeof(apdu_replay_general_authenticate_pace_perform_key_agreement), apdu_replay_general_authenticate_pace_perform_key_agreement} +}; + +// lengths of the replay APDUs +static uint8_t apdu_lengths_replay[5]; + +// type of card (ISO 14443 A or B) +static char iso_type; + +//----------------------------------------------------------------------------- +// Wrapper for sending APDUs to type A and B cards +//----------------------------------------------------------------------------- +int EPA_APDU(uint8_t *apdu, size_t length, uint8_t *response) +{ + switch(iso_type) + { + case 'a': + return iso14_apdu(apdu, (uint16_t) length, response); + break; + case 'b': + return iso14443b_apdu(apdu, length, response); + break; + default: + return 0; + break; + } +} + //----------------------------------------------------------------------------- // Closes the communication channel and turns off the field //----------------------------------------------------------------------------- @@ -82,6 +130,7 @@ void EPA_Finish() { FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); + iso_type = 0; } //----------------------------------------------------------------------------- @@ -102,7 +151,7 @@ size_t EPA_Parse_CardAccess(uint8_t *data, pace_version_info_t *pace_info) { size_t index = 0; - + while (index <= length - 2) { // determine type of element // SET or SEQUENCE @@ -159,7 +208,7 @@ size_t EPA_Parse_CardAccess(uint8_t *data, index += 2 + data[index + 1]; } } - + // TODO: We should check whether we reached the end in error, but for that // we need a better parser (e.g. with states like IN_SET or IN_PACE_INFO) return 0; @@ -177,31 +226,31 @@ int EPA_Read_CardAccess(uint8_t *buffer, size_t max_length) // we reserve 262 bytes here just to be safe (256-byte APDU + SW + ISO frame) uint8_t response_apdu[262]; int rapdu_length = 0; - + // select the file EF.CardAccess - rapdu_length = iso14_apdu((uint8_t *)apdu_select_binary_cardaccess, + rapdu_length = EPA_APDU((uint8_t *)apdu_select_binary_cardaccess, sizeof(apdu_select_binary_cardaccess), response_apdu); - if (rapdu_length != 6 + if (rapdu_length < 6 || response_apdu[rapdu_length - 4] != 0x90 || response_apdu[rapdu_length - 3] != 0x00) { - Dbprintf("epa - no select cardaccess"); + DbpString("Failed to select EF.CardAccess!"); return -1; } - + // read the file - rapdu_length = iso14_apdu((uint8_t *)apdu_read_binary, + rapdu_length = EPA_APDU((uint8_t *)apdu_read_binary, sizeof(apdu_read_binary), response_apdu); if (rapdu_length <= 6 || response_apdu[rapdu_length - 4] != 0x90 || response_apdu[rapdu_length - 3] != 0x00) { - Dbprintf("epa - no read cardaccess"); + Dbprintf("Failed to read EF.CardAccess!"); return -1; } - + // copy the content into the buffer // length of data available: apdu_length - 4 (ISO frame) - 2 (SW) size_t to_copy = rapdu_length - 6; @@ -216,14 +265,9 @@ int EPA_Read_CardAccess(uint8_t *buffer, size_t max_length) //----------------------------------------------------------------------------- static void EPA_PACE_Collect_Nonce_Abort(uint8_t step, int func_return) { -// // step in which the failure occured -// ack->arg[0] = step; -// // last return code -// ack->arg[1] = func_return; - // power down the field EPA_Finish(); - + // send the USB packet cmd_send(CMD_ACK,step,func_return,0,0,0); } @@ -247,15 +291,10 @@ void EPA_PACE_Collect_Nonce(UsbCommand *c) // return value of a function int func_return = 0; -// // initialize ack with 0s -// memset(ack->arg, 0, 12); -// memset(ack->d.asBytes, 0, 48); - // set up communication func_return = EPA_Setup(); if (func_return != 0) { EPA_PACE_Collect_Nonce_Abort(1, func_return); - Dbprintf("epa: setup fucked up! %d", func_return); return; } @@ -265,13 +304,10 @@ void EPA_PACE_Collect_Nonce(UsbCommand *c) int card_access_length = EPA_Read_CardAccess(card_access, 256); // the response has to be at least this big to hold the OID if (card_access_length < 18) { - Dbprintf("epa: Too small!"); EPA_PACE_Collect_Nonce_Abort(2, card_access_length); return; } - Dbprintf("epa: foo!"); - // this will hold the PACE info of the card pace_version_info_t pace_version_info; // search for the PACE OID @@ -282,13 +318,11 @@ void EPA_PACE_Collect_Nonce(UsbCommand *c) EPA_PACE_Collect_Nonce_Abort(3, func_return); return; } - - Dbprintf("epa: bar!"); - + // initiate the PACE protocol // use the CAN for the password since that doesn't change func_return = EPA_PACE_MSE_Set_AT(pace_version_info, 2); - + // now get the nonce uint8_t nonce[256] = {0}; uint8_t requested_size = (uint8_t)c->arg[0]; @@ -299,13 +333,11 @@ void EPA_PACE_Collect_Nonce(UsbCommand *c) EPA_PACE_Collect_Nonce_Abort(4, func_return); return; } - - // all done, return + + // all done, return EPA_Finish(); - + // save received information -// ack->arg[1] = func_return; -// memcpy(ack->d.asBytes, nonce, func_return); cmd_send(CMD_ACK,0,func_return,0,nonce,func_return); } @@ -327,10 +359,10 @@ int EPA_PACE_Get_Nonce(uint8_t requested_length, uint8_t *nonce) sizeof(apdu_general_authenticate_pace_get_nonce)); // append Le (requested length + 2 due to tag/length taking 2 bytes) in RAPDU apdu[sizeof(apdu_general_authenticate_pace_get_nonce)] = requested_length + 4; - + // send it uint8_t response_apdu[262]; - int send_return = iso14_apdu(apdu, + int send_return = EPA_APDU(apdu, sizeof(apdu), response_apdu); // check if the command succeeded @@ -340,7 +372,7 @@ int EPA_PACE_Get_Nonce(uint8_t requested_length, uint8_t *nonce) { return -1; } - + // if there is no nonce in the RAPDU, return here if (send_return < 10) { @@ -355,7 +387,7 @@ int EPA_PACE_Get_Nonce(uint8_t requested_length, uint8_t *nonce) } // copy the nonce memcpy(nonce, response_apdu + 6, nonce_length); - + return nonce_length; } @@ -401,7 +433,7 @@ int EPA_PACE_MSE_Set_AT(pace_version_info_t pace_version_info, uint8_t password) apdu[4] = apdu_length - 5; // send it uint8_t response_apdu[6]; - int send_return = iso14_apdu(apdu, + int send_return = EPA_APDU(apdu, apdu_length, response_apdu); // check if the command succeeded @@ -414,35 +446,113 @@ int EPA_PACE_MSE_Set_AT(pace_version_info_t pace_version_info, uint8_t password) return 0; } +//----------------------------------------------------------------------------- +// Perform the PACE protocol by replaying given APDUs +//----------------------------------------------------------------------------- +void EPA_PACE_Replay(UsbCommand *c) +{ + uint32_t timings[sizeof(apdu_lengths_replay) / sizeof(apdu_lengths_replay[0])] = {0}; + + // if an APDU has been passed, save it + if (c->arg[0] != 0) { + // make sure it's not too big + if(c->arg[2] > apdus_replay[c->arg[0] - 1].len) + { + cmd_send(CMD_ACK, 1, 0, 0, NULL, 0); + } + memcpy(apdus_replay[c->arg[0] - 1].data + c->arg[1], + c->d.asBytes, + c->arg[2]); + // save/update APDU length + if (c->arg[1] == 0) { + apdu_lengths_replay[c->arg[0] - 1] = c->arg[2]; + } else { + apdu_lengths_replay[c->arg[0] - 1] += c->arg[2]; + } + cmd_send(CMD_ACK, 0, 0, 0, NULL, 0); + return; + } + + // return value of a function + int func_return; + + // set up communication + func_return = EPA_Setup(); + if (func_return != 0) { + EPA_Finish(); + cmd_send(CMD_ACK, 2, func_return, 0, NULL, 0); + return; + } + + // increase the timeout (at least some cards really do need this!)///////////// + // iso14a_set_timeout(0x0003FFFF); + + // response APDU + uint8_t response_apdu[300] = {0}; + + // now replay the data and measure the timings + for (int i = 0; i < sizeof(apdu_lengths_replay); i++) { + StartCountUS(); + func_return = EPA_APDU(apdus_replay[i].data, + apdu_lengths_replay[i], + response_apdu); + timings[i] = GetCountUS(); + // every step but the last one should succeed + if (i < sizeof(apdu_lengths_replay) - 1 + && (func_return < 6 + || response_apdu[func_return - 4] != 0x90 + || response_apdu[func_return - 3] != 0x00)) + { + EPA_Finish(); + cmd_send(CMD_ACK, 3 + i, func_return, 0, timings, 20); + return; + } + } + EPA_Finish(); + cmd_send(CMD_ACK,0,0,0,timings,20); + return; +} + //----------------------------------------------------------------------------- // Set up a communication channel (Card Select, PPS) // Returns 0 on success or a non-zero error code on failure //----------------------------------------------------------------------------- int EPA_Setup() { - int return_code = 0; uint8_t uid[10]; uint8_t pps_response[3]; uint8_t pps_response_par[1]; - iso14a_card_select_t card_select_info; + iso14a_card_select_t card_a_info; + iso14b_card_select_t card_b_info; + // first, look for type A cards // power up the field iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); - // select the card - return_code = iso14443a_select_card(uid, &card_select_info, NULL); - if (return_code != 1) { - Dbprintf("Epa: Can't select card"); - return 1; + return_code = iso14443a_select_card(uid, &card_a_info, NULL, true, 0); + if (return_code == 1) { + // send the PPS request + ReaderTransmit((uint8_t *)pps, sizeof(pps), NULL); + return_code = ReaderReceive(pps_response, pps_response_par); + if (return_code != 3 || pps_response[0] != 0xD0) { + return return_code == 0 ? 2 : return_code; + } + Dbprintf("ISO 14443 Type A"); + iso_type = 'a'; + return 0; } - // send the PPS request - ReaderTransmit((uint8_t *)pps, sizeof(pps), NULL); - return_code = ReaderReceive(pps_response, pps_response_par); - if (return_code != 3 || pps_response[0] != 0xD0) { - return return_code == 0 ? 2 : return_code; + // if we're here, there is no type A card, so we look for type B + // power up the field + iso14443b_setup(); + // select the card + return_code = iso14443b_select_card( &card_b_info ); + if (return_code == 1) { + Dbprintf("ISO 14443 Type B"); + iso_type = 'b'; + return 0; } - - return 0; -} \ No newline at end of file + Dbprintf("No card found."); + return 1; +}