X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/18a3bf6119630ad15968c252a4f69033ebd2f503..16cdfa6355e0eb1a8bd8879727249518fdb8be39:/armsrc/i2c.c?ds=inline diff --git a/armsrc/i2c.c b/armsrc/i2c.c index 721b4b2e..7efb1fd3 100644 --- a/armsrc/i2c.c +++ b/armsrc/i2c.c @@ -8,9 +8,21 @@ //----------------------------------------------------------------------------- // The main i2c code, for communications with smart card module //----------------------------------------------------------------------------- + #include "i2c.h" -#include "mifareutil.h" //for mf_dbglevel + +#include +#include #include "string.h" //for memset memcmp +#include "proxmark3.h" +#include "mifareutil.h" // for MF_DBGLEVEL +#include "BigBuf.h" +#include "apps.h" + +#ifdef WITH_SMARTCARD +#include "smartcard.h" +#endif + // ¶¨ÒåÁ¬½ÓÒý½Å #define GPIO_RST AT91C_PIO_PA1 @@ -27,13 +39,13 @@ #define I2C_ERROR "I2C_WaitAck Error" -volatile unsigned long c; +static volatile unsigned long c; // Ö±½ÓʹÓÃÑ­»·À´ÑÓʱ£¬Ò»¸öÑ­»· 6 ÌõÖ¸Á48M£¬ Delay=1 ´ó¸ÅΪ 200kbps // timer. // I2CSpinDelayClk(4) = 12.31us // I2CSpinDelayClk(1) = 3.07us -void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) { +static void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) { for (c = delay * 2; c; c--) {}; } @@ -45,23 +57,19 @@ void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) { #define ISO7618_MAX_FRAME 255 -void I2C_init(void) { - // ÅäÖø´Î»Òý½Å£¬¹Ø±ÕÉÏÀ­£¬ÍÆÍìÊä³ö£¬Ä¬ÈÏ¸ß - // Configure reset pin, close up pull up, push-pull output, default high - AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST; - AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST; +static void I2C_init(void) { + // Configure reset pin + AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST; // disable pull up resistor + AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST; // push-pull output (multidriver disabled) - // ÅäÖà I2C Òý½Å£¬¿ªÆôÉÏÀ­£¬¿ªÂ©Êä³ö - // Configure I2C pin, open up, open leakage - AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA); // ´ò¿ªÉÏÀ­ Open up the pull up - AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA); + // Configure SCL and SDA pins + AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA); // enable pull up resistor + AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA); // open drain output (multidriver enabled) - requires external pull up resistor - // ĬÈÏÈý¸ùÏßÈ«²¿À­¸ß - // default three lines all pull up + // set all three outputs to high AT91C_BASE_PIOA->PIO_SODR |= (GPIO_SCL | GPIO_SDA | GPIO_RST); - // ÔÊÐíÊä³ö - // allow output + // configure all three pins as output, controlled by PIOA AT91C_BASE_PIOA->PIO_OER |= (GPIO_SCL | GPIO_SDA | GPIO_RST); AT91C_BASE_PIOA->PIO_PER |= (GPIO_SCL | GPIO_SDA | GPIO_RST); } @@ -69,7 +77,7 @@ void I2C_init(void) { // ÉèÖø´Î»×´Ì¬ // set the reset state -void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) { +static void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) { if (LineRST) HIGH(GPIO_RST); else @@ -89,7 +97,7 @@ void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) { // ¸´Î»½øÈëÖ÷³ÌÐò // Reset the SIM_Adapter, then enter the main program // Note: the SIM_Adapter will not enter the main program after power up. Please run this function before use SIM_Adapter. -void I2C_Reset_EnterMainProgram(void) { +static void I2C_Reset_EnterMainProgram(void) { I2C_SetResetStatus(0, 0, 0); // À­µÍ¸´Î»Ïß SpinDelay(30); I2C_SetResetStatus(1, 0, 0); // ½â³ý¸´Î» @@ -98,19 +106,9 @@ void I2C_Reset_EnterMainProgram(void) { SpinDelay(10); } -// ¸´Î»½øÈëÒýµ¼Ä£Ê½ -// Reset the SIM_Adapter, then enter the bootloader program -// Reserve£ºFor firmware update. -void I2C_Reset_EnterBootloader(void) { - I2C_SetResetStatus(0, 1, 1); // À­µÍ¸´Î»Ïß - SpinDelay(100); - I2C_SetResetStatus(1, 1, 1); // ½â³ý¸´Î» - SpinDelay(10); -} - // µÈ´ýʱÖÓ±ä¸ß // Wait for the clock to go High. -bool WaitSCL_H_delay(uint32_t delay) { +static bool WaitSCL_H_delay(uint32_t delay) { while (delay--) { if (SCL_read) { return true; @@ -120,26 +118,26 @@ bool WaitSCL_H_delay(uint32_t delay) { return false; } -// 5000 * 3.07us = 15350us. 15.35ms -bool WaitSCL_H(void) { - return WaitSCL_H_delay(5000); +// 15000 * 3.07us = 46050us. 46.05ms +static bool WaitSCL_H(void) { + return WaitSCL_H_delay(15000); } -// Wait max 300ms or until SCL goes LOW. -// Which ever comes first -bool WaitSCL_L_300ms(void) { - volatile uint16_t delay = 300; - while ( delay-- ) { - // exit on SCL LOW - if (!SCL_read) +bool WaitSCL_L_delay(uint32_t delay) { + while (delay--) { + if (!SCL_read) { return true; - - SpinDelay(1); + } + I2C_DELAY_1CLK; } - return (delay == 0); + return false; } -bool I2C_Start(void) { +bool WaitSCL_L(void) { + return WaitSCL_L_delay(15000); +} + +static bool I2C_Start(void) { I2C_DELAY_XCLK(4); SDA_H; I2C_DELAY_1CLK; @@ -155,22 +153,8 @@ bool I2C_Start(void) { return true; } -bool I2C_WaitForSim() { - // variable delay here. - if (!WaitSCL_L_300ms()) - return false; - - // 8051 speaks with smart card. - // 1000*50*3.07 = 153.5ms - // 1byte transfer == 1ms - if (!WaitSCL_H_delay(2000*50) ) - return false; - - return true; -} - // send i2c STOP -void I2C_Stop(void) { +static void I2C_Stop(void) { SCL_L; I2C_DELAY_2CLK; SDA_L; I2C_DELAY_2CLK; SCL_H; I2C_DELAY_2CLK; @@ -179,29 +163,14 @@ void I2C_Stop(void) { I2C_DELAY_XCLK(8); } -// Send i2c ACK -void I2C_Ack(void) { - SCL_L; I2C_DELAY_2CLK; - SDA_L; I2C_DELAY_2CLK; - SCL_H; I2C_DELAY_2CLK; - SCL_L; I2C_DELAY_2CLK; -} - -// Send i2c NACK -void I2C_NoAck(void) { - SCL_L; I2C_DELAY_2CLK; - SDA_H; I2C_DELAY_2CLK; - SCL_H; I2C_DELAY_2CLK; - SCL_L; I2C_DELAY_2CLK; -} - -bool I2C_WaitAck(void) { +static bool I2C_WaitAck(void) { SCL_L; I2C_DELAY_1CLK; SDA_H; I2C_DELAY_1CLK; SCL_H; if (!WaitSCL_H()) return false; + I2C_DELAY_2CLK; I2C_DELAY_2CLK; if (SDA_read) { SCL_L; @@ -211,10 +180,10 @@ bool I2C_WaitAck(void) { return true; } -void I2C_SendByte(uint8_t data) { - uint8_t i = 8; +static void I2C_SendByte(uint8_t data) { + uint8_t bits = 8; - while (i--) { + while (bits--) { SCL_L; I2C_DELAY_1CLK; if (data & 0x80) @@ -223,6 +192,7 @@ void I2C_SendByte(uint8_t data) { SDA_L; data <<= 1; + I2C_DELAY_1CLK; SCL_H; @@ -234,18 +204,92 @@ void I2C_SendByte(uint8_t data) { SCL_L; } -uint8_t I2C_ReadByte(void) { - uint8_t i = 8, b = 0; +bool I2C_is_available(void) { + I2C_init(); + I2C_Reset_EnterMainProgram(); + if (!I2C_Start()) // some other device is active on the bus + return true; + I2C_SendByte(I2C_DEVICE_ADDRESS_MAIN & 0xFE); + if (!I2C_WaitAck()) { // no response from smartcard reader + I2C_Stop(); + return false; + } + I2C_Stop(); + return true; +} + +#ifdef WITH_SMARTCARD +// ¸´Î»½øÈëÒýµ¼Ä£Ê½ +// Reset the SIM_Adapter, then enter the bootloader program +// Reserve£ºFor firmware update. +static void I2C_Reset_EnterBootloader(void) { + I2C_SetResetStatus(0, 1, 1); // À­µÍ¸´Î»Ïß + SpinDelay(100); + I2C_SetResetStatus(1, 1, 1); // ½â³ý¸´Î» + SpinDelay(10); +} + +// Wait max 300ms or until SCL goes LOW. +// Which ever comes first +static bool WaitSCL_L_300ms(void) { + volatile uint16_t delay = 310; + while ( delay-- ) { + // exit on SCL LOW + if (!SCL_read) + return true; + + SpinDelay(1); + } + return (delay == 0); +} + +static bool I2C_WaitForSim() { + // variable delay here. + if (!WaitSCL_L_300ms()) + return false; + + // 8051 speaks with smart card. + // 1000*50*3.07 = 153.5ms + // 1byte transfer == 1ms with max frame being 256bytes + if (!WaitSCL_H_delay(10 * 1000 * 50)) + return false; + + return true; +} + +// Send i2c ACK +static void I2C_Ack(void) { + SCL_L; I2C_DELAY_2CLK; + SDA_L; I2C_DELAY_2CLK; + SCL_H; I2C_DELAY_2CLK; + if (!WaitSCL_H()) return; + SCL_L; I2C_DELAY_2CLK; +} + +// Send i2c NACK +static void I2C_NoAck(void) { + SCL_L; I2C_DELAY_2CLK; + SDA_H; I2C_DELAY_2CLK; + SCL_H; I2C_DELAY_2CLK; + if (!WaitSCL_H()) return; + SCL_L; I2C_DELAY_2CLK; +} + +static int16_t I2C_ReadByte(void) { + uint8_t bits = 8, b = 0; SDA_H; - while (i--) { + while (bits--) { b <<= 1; - SCL_L; I2C_DELAY_2CLK; + SCL_L; + if (!WaitSCL_L()) return -2; + + I2C_DELAY_1CLK; + SCL_H; - if (!WaitSCL_H()) - return 0; + if (!WaitSCL_H()) return -1; - I2C_DELAY_2CLK; + I2C_DELAY_1CLK; if (SDA_read) b |= 0x01; } @@ -254,7 +298,7 @@ uint8_t I2C_ReadByte(void) { } // Sends one byte ( command to be written, SlaveDevice address) -bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) { +static bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) { bool bBreak = true; do { if (!I2C_Start()) @@ -281,7 +325,7 @@ bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) { // дÈë1×Ö½ÚÊý¾Ý £¨´ýдÈëÊý¾Ý£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£© // Sends 1 byte data (Data to be written, command to be written , SlaveDevice address ). -bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) { +static bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) { bool bBreak = true; do { if (!I2C_Start()) @@ -313,7 +357,7 @@ bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) { // дÈë1´®Êý¾Ý£¨´ýдÈëÊý×éµØÖ·£¬´ýдÈ볤¶È£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£© //Sends a string of data (Array, length, command to be written , SlaveDevice address ). // len = uint8 (max buffer to write 256bytes) -bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) { +static bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) { bool bBreak = true; do { if (!I2C_Start()) @@ -352,16 +396,16 @@ bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t dev // ¶Á³ö1´®Êý¾Ý£¨´æ·Å¶Á³öÊý¾Ý£¬´ý¶Á³ö³¤¶È£¬´ø¶Á³öµØÖ·£¬Æ÷¼þÀàÐÍ£© // read 1 strings of data (Data array, Readout length, command to be written , SlaveDevice address ). // len = uint8 (max buffer to read 256bytes) -uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) { +static int16_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) { if ( !data || len == 0 ) return 0; // extra wait 500us (514us measured) // 200us (xx measured) - SpinDelayUs(200); + SpinDelayUs(600); bool bBreak = true; - uint8_t readcount = 0; + uint16_t readcount = 0; do { if (!I2C_Start()) @@ -391,11 +435,14 @@ uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t d return 0; } - // reading while (len) { - *data = I2C_ReadByte(); - + int16_t tmp = I2C_ReadByte(); + if ( tmp < 0 ) + return tmp; + + *data = (uint8_t)tmp & 0xFF; + len--; // ¶ÁÈ¡µÄµÚÒ»¸ö×Ö½ÚΪºóÐø³¤¶È @@ -416,10 +463,10 @@ uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t d I2C_Stop(); // return bytecount - first byte (which is length byte) - return (readcount) ? --readcount : 0; + return --readcount; } -uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) { +static int16_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) { //START, 0xB0, 0x00, 0x00, START, 0xB1, xx, yy, zz, ......, STOP bool bBreak = true; uint8_t readcount = 0; @@ -461,8 +508,13 @@ uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t // reading while (len) { - *data = I2C_ReadByte(); - + + int16_t tmp = I2C_ReadByte(); + if ( tmp < 0 ) + return tmp; + + *data = (uint8_t)tmp & 0xFF; + data++; readcount++; len--; @@ -478,7 +530,7 @@ uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t return readcount; } -bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) { +static bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) { //START, 0xB0, 0x00, 0x00, xx, yy, zz, ......, STOP bool bBreak = true; @@ -534,30 +586,79 @@ void I2C_print_status(void) { DbpString(" version.................FAILED"); } -bool GetATR(smart_card_atr_t *card_ptr) { +// Will read response from smart card module, retries 3 times to get the data. +static bool sc_rx_bytes(uint8_t* dest, uint8_t *destlen) { + uint8_t i = 3; + int16_t len = 0; + while (i--) { + + I2C_WaitForSim(); + + len = I2C_BufferRead(dest, *destlen, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN); + + if ( len > 1 ){ + break; + } else if ( len == 1 ) { + continue; + } else if ( len <= 0 ) { + return false; + } + } + // after three + if ( len <= 1 ) + return false; + + *destlen = (uint8_t)len & 0xFF; + return true; +} + +static bool GetATR(smart_card_atr_t *card_ptr) { - // clear - if ( card_ptr ) { - card_ptr->atr_len = 0; - memset(card_ptr->atr, 0, sizeof(card_ptr->atr)); + if ( !card_ptr ) { + return false; } + card_ptr->atr_len = 0; + memset(card_ptr->atr, 0, sizeof(card_ptr->atr)); + // Send ATR // start [C0 01] stop start C1 len aa bb cc stop] I2C_WriteCmd(I2C_DEVICE_CMD_GENERATE_ATR, I2C_DEVICE_ADDRESS_MAIN); uint8_t cmd[1] = {1}; LogTrace(cmd, 1, 0, 0, NULL, true); - //wait for sim card to answer. + // wait for sim card to answer. + // 1byte = 1ms, max frame 256bytes. Should wait 256ms at least just in case. if (!I2C_WaitForSim()) return false; - // read answer - uint8_t len = I2C_BufferRead(card_ptr->atr, sizeof(card_ptr->atr), I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN); - - if ( len == 0 ) + // read bytes from module + uint8_t len = sizeof(card_ptr->atr); + if ( !sc_rx_bytes(card_ptr->atr, &len) ) return false; + uint8_t pos_td = 1; + if ( (card_ptr->atr[1] & 0x10) == 0x10) pos_td++; + if ( (card_ptr->atr[1] & 0x20) == 0x20) pos_td++; + if ( (card_ptr->atr[1] & 0x40) == 0x40) pos_td++; + + // T0 indicate presence T=0 vs T=1. T=1 has checksum TCK + if ( (card_ptr->atr[1] & 0x80) == 0x80) { + + pos_td++; + + // 1 == T1 , presence of checksum TCK + if ( (card_ptr->atr[pos_td] & 0x01) == 0x01) { + uint8_t chksum = 0; + // xor property. will be zero when xored with chksum. + for (uint8_t i = 1; i < len; ++i) + chksum ^= card_ptr->atr[i]; + if ( chksum ) { + if ( MF_DBGLEVEL > 2) DbpString("Wrong ATR checksum"); + } + } + } + // for some reason we only get first byte of atr, if that is so, send dummy command to retrieve the rest of the atr if (len == 1) { @@ -571,10 +672,8 @@ bool GetATR(smart_card_atr_t *card_ptr) { len = len + len2; } - if ( card_ptr ) { - card_ptr->atr_len = len; - LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false); - } + card_ptr->atr_len = len; + LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false); return true; } @@ -631,7 +730,9 @@ void SmartCardRaw( uint64_t arg0, uint64_t arg1, uint8_t *data ) { if ( !I2C_WaitForSim() ) goto OUT; - len = I2C_BufferRead(resp, ISO7618_MAX_FRAME, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN); + // read bytes from module + len = ISO7618_MAX_FRAME; + sc_rx_bytes(resp, &len); LogTrace(resp, len, 0, 0, NULL, false); } OUT: @@ -652,7 +753,7 @@ void SmartCardUpgrade(uint64_t arg0) { I2C_Reset_EnterBootloader(); bool isOK = true; - uint8_t res = 0; + int16_t res = 0; uint16_t length = arg0; uint16_t pos = 0; uint8_t *fwdata = BigBuf_get_addr(); @@ -680,7 +781,7 @@ void SmartCardUpgrade(uint64_t arg0) { // read res = I2C_ReadFW(verfiydata, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT); - if ( res == 0) { + if ( res <= 0) { DbpString("Reading back failed"); isOK = false; break; @@ -718,3 +819,5 @@ void SmartCardSetClock(uint64_t arg0) { set_tracing(false); LEDsoff(); } + +#endif \ No newline at end of file