X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/1d0ccbe04b6d04cc4e05aeb9bbcb7b7fa0cfdbd1..471f89b8bd55837563002f4270d7a2fdb416684a:/common/protocols.h diff --git a/common/protocols.h b/common/protocols.h index d20c95fc..ba3a9a90 100644 --- a/common/protocols.h +++ b/common/protocols.h @@ -134,6 +134,7 @@ ISO 7816-4 Basic interindustry commands. For command APDU's. #define ISO14443A_CMD_WUPA 0x52 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 +#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97 #define ISO14443A_CMD_WRITEBLOCK 0xA0 #define ISO14443A_CMD_HALT 0x50 #define ISO14443A_CMD_RATS 0xE0 @@ -151,7 +152,6 @@ ISO 7816-4 Basic interindustry commands. For command APDU's. #define MIFARE_EV1_PERSONAL_UID 0x40 #define MIFARE_EV1_SETMODE 0x43 - #define MIFARE_ULC_WRITE 0xA2 //#define MIFARE_ULC__COMP_WRITE 0xA0 #define MIFARE_ULC_AUTH_1 0x1A @@ -166,7 +166,27 @@ ISO 7816-4 Basic interindustry commands. For command APDU's. #define MIFARE_ULEV1_CHECKTEAR 0x3E #define MIFARE_ULEV1_VCSL 0x4B - +// mifare 4bit card answers +#define CARD_ACK 0x0A // 1010 - ACK +#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed) +#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error + + +// Magic Generation 1, parameter "work flags" +// bit 0 - need get UID +// bit 1 - send wupC (wakeup chinese) +// bit 2 - send HALT cmd after sequence +// bit 3 - turn on FPGA +// bit 4 - turn off FPGA +// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a) +#define MAGIC_UID 0x01 +#define MAGIC_WUPC 0x02 +#define MAGIC_HALT 0x04 +#define MAGIC_INIT 0x08 +#define MAGIC_OFF 0x10 +#define MAGIC_DATAIN 0x20 +#define MAGIC_WIPE 0x40 +#define MAGIC_SINGLE (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E /** 06 00 = INITIATE @@ -243,39 +263,39 @@ ISO 7816-4 Basic interindustry commands. For command APDU's. #define FUSE_RA 0x01 // ISO 7816-4 Basic interindustry commands. For command APDU's. -#define ISO7816_READ_BINARY 0xB0 -#define ISO7816_WRITE_BINARY 0xD0 -#define ISO7816_UPDATE_BINARY 0xD6 -#define ISO7816_ERASE_BINARY 0x0E -#define ISO7816_READ_RECORDS 0xB2 -#define ISO7816_WRITE_RECORDS 0xD2 -#define ISO7816_APPEND_RECORD 0xE2 -#define ISO7816_UPDATE_RECORD 0xDC -#define ISO7816_GET_DATA 0xCA -#define ISO7816_PUT_DATA 0xDA -#define ISO7816_SELECT_FILE 0xA4 -#define ISO7816_VERIFY 0x20 +#define ISO7816_READ_BINARY 0xB0 +#define ISO7816_WRITE_BINARY 0xD0 +#define ISO7816_UPDATE_BINARY 0xD6 +#define ISO7816_ERASE_BINARY 0x0E +#define ISO7816_READ_RECORDS 0xB2 +#define ISO7816_WRITE_RECORDS 0xD2 +#define ISO7816_APPEND_RECORD 0xE2 +#define ISO7816_UPDATE_RECORD 0xDC +#define ISO7816_GET_DATA 0xCA +#define ISO7816_PUT_DATA 0xDA +#define ISO7816_SELECT_FILE 0xA4 +#define ISO7816_VERIFY 0x20 #define ISO7816_INTERNAL_AUTHENTICATION 0x88 #define ISO7816_EXTERNAL_AUTHENTICATION 0x82 -#define ISO7816_GET_CHALLENGE 0xB4 -#define ISO7816_MANAGE_CHANNEL 0x70 +#define ISO7816_GET_CHALLENGE 0xB4 +#define ISO7816_MANAGE_CHANNEL 0x70 // ISO7816-4 For response APDU's -#define ISO7816_OK 0x9000 +#define ISO7816_OK 0x9000 // 6x xx = ERROR void printIclassDumpInfo(uint8_t* iclass_dump); void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb); /* T55x7 configuration register definitions */ -#define T55x7_POR_DELAY 0x00000001 -#define T55x7_ST_TERMINATOR 0x00000008 -#define T55x7_PWD 0x00000010 +#define T55x7_POR_DELAY 0x00000001 +#define T55x7_ST_TERMINATOR 0x00000008 +#define T55x7_PWD 0x00000010 #define T55x7_MAXBLOCK_SHIFT 5 -#define T55x7_AOR 0x00000200 -#define T55x7_PSKCF_RF_2 0 -#define T55x7_PSKCF_RF_4 0x00000400 -#define T55x7_PSKCF_RF_8 0x00000800 +#define T55x7_AOR 0x00000200 +#define T55x7_PSKCF_RF_2 0 +#define T55x7_PSKCF_RF_4 0x00000400 +#define T55x7_PSKCF_RF_8 0x00000800 #define T55x7_MODULATION_DIRECT 0 #define T55x7_MODULATION_PSK1 0x00001000 #define T55x7_MODULATION_PSK2 0x00002000 @@ -287,17 +307,17 @@ void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t * #define T55x7_MODULATION_MANCHESTER 0x00008000 #define T55x7_MODULATION_BIPHASE 0x00010000 #define T55x7_MODULATION_DIPHASE 0x00018000 -#define T55x7_BITRATE_RF_8 0 -#define T55x7_BITRATE_RF_16 0x00040000 -#define T55x7_BITRATE_RF_32 0x00080000 -#define T55x7_BITRATE_RF_40 0x000C0000 -#define T55x7_BITRATE_RF_50 0x00100000 -#define T55x7_BITRATE_RF_64 0x00140000 +#define T55x7_BITRATE_RF_8 0 +#define T55x7_BITRATE_RF_16 0x00040000 +#define T55x7_BITRATE_RF_32 0x00080000 +#define T55x7_BITRATE_RF_40 0x000C0000 +#define T55x7_BITRATE_RF_50 0x00100000 +#define T55x7_BITRATE_RF_64 0x00140000 #define T55x7_BITRATE_RF_100 0x00180000 #define T55x7_BITRATE_RF_128 0x001C0000 /* T5555 (Q5) configuration register definitions */ -#define T5555_ST_TERMINATOR 0x00000001 +#define T5555_ST_TERMINATOR 0x00000001 #define T5555_MAXBLOCK_SHIFT 0x00000001 #define T5555_MODULATION_MANCHESTER 0 #define T5555_MODULATION_PSK1 0x00000010 @@ -307,15 +327,15 @@ void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t * #define T5555_MODULATION_FSK2 0x00000050 #define T5555_MODULATION_BIPHASE 0x00000060 #define T5555_MODULATION_DIRECT 0x00000070 -#define T5555_INVERT_OUTPUT 0x00000080 -#define T5555_PSK_RF_2 0 -#define T5555_PSK_RF_4 0x00000100 -#define T5555_PSK_RF_8 0x00000200 -#define T5555_USE_PWD 0x00000400 -#define T5555_USE_AOR 0x00000800 -#define T5555_BITRATE_SHIFT 12 -#define T5555_FAST_WRITE 0x00004000 -#define T5555_PAGE_SELECT 0x00008000 +#define T5555_INVERT_OUTPUT 0x00000080 +#define T5555_PSK_RF_2 0 +#define T5555_PSK_RF_4 0x00000100 +#define T5555_PSK_RF_8 0x00000200 +#define T5555_USE_PWD 0x00000400 +#define T5555_USE_AOR 0x00000800 +#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2 +#define T5555_FAST_WRITE 0x00004000 +#define T5555_PAGE_SELECT 0x00008000 uint32_t GetT55xxClockBit(uint32_t clock);