X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/21a615cb3bd9142902017135b33be42248f36a33..d889dacc9d6a45b41deca907042d97221a06e9a5:/armsrc/lfops.c?ds=sidebyside diff --git a/armsrc/lfops.c b/armsrc/lfops.c index cf04c31b..14b62673 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -16,7 +16,8 @@ #include "string.h" #include "lfdemod.h" #include "lfsampling.h" -#include "usb_cdc.h" //test +#include "protocols.h" +#include "usb_cdc.h" // for usb_poll_validate_length /** * Function to do a modulation and then get samples. @@ -36,6 +37,8 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint sample_config sc = { 0,0,1, divisor_used, 0}; setSamplingConfig(&sc); + //clear read buffer + BigBuf_Clear_keep_EM(); /* Make sure the tag is reset */ FpgaDownloadAndGo(FPGA_BITSTREAM_LF); @@ -72,8 +75,6 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint DoAcquisition_config(false); } - - /* blank r/w tag data stream ...0000000000000000 01111111 1010101010101010101010101010101010101010101010101010101010101010 @@ -213,8 +214,6 @@ void ReadTItag(void) } } - - void WriteTIbyte(uint8_t b) { int i = 0; @@ -249,7 +248,7 @@ void AcquireTiType(void) // clear buffer uint32_t *BigBuf = (uint32_t *)BigBuf_get_addr(); - memset(BigBuf,0,BigBuf_max_traceLen()/sizeof(uint32_t)); + BigBuf_Clear_ext(false); // Set up the synchronous serial port AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN; @@ -311,16 +310,11 @@ void AcquireTiType(void) } } - - - // arguments: 64bit data split into 32bit idhi:idlo and optional 16bit crc // if crc provided, it will be written with the data verbatim (even if bogus) // if not provided a valid crc will be computed from the data and written. void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) { - - FpgaDownloadAndGo(FPGA_BITSTREAM_LF); if(crc == 0) { crc = update_crc16(crc, (idlo)&0xff); @@ -401,8 +395,8 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK; - #define SHORT_COIL() LOW(GPIO_SSC_DOUT) - #define OPEN_COIL() HIGH(GPIO_SSC_DOUT) + #define SHORT_COIL() LOW(GPIO_SSC_DOUT) + #define OPEN_COIL() HIGH(GPIO_SSC_DOUT) i = 0; for(;;) { @@ -648,7 +642,6 @@ static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase) memset(dest+(*n), c ^ *phase, clock); *phase ^= 1; } - } // args clock, ask/man or askraw, invert, transmission separator @@ -693,13 +686,9 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) //i+=16; //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]); - if (ledcontrol) - LED_A_ON(); - + if (ledcontrol) LED_A_ON(); SimulateTagLowFrequency(n, 0, ledcontrol); - - if (ledcontrol) - LED_A_OFF(); + if (ledcontrol) LED_A_OFF(); } //carrier can be 2,4 or 8 @@ -749,12 +738,9 @@ void CmdPSKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) //i+=16; //Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]); - if (ledcontrol) - LED_A_ON(); + if (ledcontrol) LED_A_ON(); SimulateTagLowFrequency(n, 0, ledcontrol); - - if (ledcontrol) - LED_A_OFF(); + if (ledcontrol) LED_A_OFF(); } // loop to get raw HID waveform then FSK demodulate the TAG ID from it @@ -768,6 +754,9 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); + //clear read buffer + BigBuf_Clear_keep_EM(); + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { WDT_HIT(); @@ -851,9 +840,10 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol) void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) { uint8_t *dest = BigBuf_get_addr(); - //const size_t sizeOfBigBuff = BigBuf_max_traceLen(); size_t size; int idx=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -864,72 +854,71 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) DoAcquisition_default(-1,true); // FSK demodulator - //size = sizeOfBigBuff; //variable size will change after demod so re initialize it before use size = 50*128*2; //big enough to catch 2 sequences of largest format idx = AWIDdemodFSK(dest, &size); - if (idx>0 && size==96){ - // Index map - // 0 10 20 30 40 50 60 - // | | | | | | | - // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96 - // ----------------------------------------------------------------------------- - // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1 - // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96 - // |---26 bit---| |-----117----||-------------142-------------| - // b = format bit len, o = odd parity of last 3 bits - // f = facility code, c = card number - // w = wiegand parity - // (26 bit format shown) - - //get raw ID before removing parities - uint32_t rawLo = bytebits_to_byte(dest+idx+64,32); - uint32_t rawHi = bytebits_to_byte(dest+idx+32,32); - uint32_t rawHi2 = bytebits_to_byte(dest+idx,32); - - size = removeParity(dest, idx+8, 4, 1, 88); - // ok valid card found! - - // Index map - // 0 10 20 30 40 50 60 - // | | | | | | | - // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456 - // ----------------------------------------------------------------------------- - // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000 - // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx - // |26 bit| |-117--| |-----142------| - // b = format bit len, o = odd parity of last 3 bits - // f = facility code, c = card number - // w = wiegand parity - // (26 bit format shown) - - uint32_t fc = 0; - uint32_t cardnum = 0; - uint32_t code1 = 0; - uint32_t code2 = 0; - uint8_t fmtLen = bytebits_to_byte(dest,8); - if (fmtLen==26){ - fc = bytebits_to_byte(dest+9, 8); - cardnum = bytebits_to_byte(dest+17, 16); - code1 = bytebits_to_byte(dest+8,fmtLen); - Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo); - } else { - cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16); - if (fmtLen>32){ - code1 = bytebits_to_byte(dest+8,fmtLen-32); - code2 = bytebits_to_byte(dest+8+(fmtLen-32),32); - Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo); - } else{ - code1 = bytebits_to_byte(dest+8,fmtLen); - Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo); - } - } - if (findone){ - if (ledcontrol) LED_A_OFF(); - return; + if (idx<=0 || size!=96) continue; + // Index map + // 0 10 20 30 40 50 60 + // | | | | | | | + // 01234567 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 456 7 890 1 234 5 678 9 012 3 - to 96 + // ----------------------------------------------------------------------------- + // 00000001 000 1 110 1 101 1 011 1 101 1 010 0 000 1 000 1 010 0 001 0 110 1 100 0 000 1 000 1 + // premable bbb o bbb o bbw o fff o fff o ffc o ccc o ccc o ccc o ccc o ccc o wxx o xxx o xxx o - to 96 + // |---26 bit---| |-----117----||-------------142-------------| + // b = format bit len, o = odd parity of last 3 bits + // f = facility code, c = card number + // w = wiegand parity + // (26 bit format shown) + + //get raw ID before removing parities + uint32_t rawLo = bytebits_to_byte(dest+idx+64,32); + uint32_t rawHi = bytebits_to_byte(dest+idx+32,32); + uint32_t rawHi2 = bytebits_to_byte(dest+idx,32); + + size = removeParity(dest, idx+8, 4, 1, 88); + if (size != 66) continue; + // ok valid card found! + + // Index map + // 0 10 20 30 40 50 60 + // | | | | | | | + // 01234567 8 90123456 7890123456789012 3 456789012345678901234567890123456 + // ----------------------------------------------------------------------------- + // 00011010 1 01110101 0000000010001110 1 000000000000000000000000000000000 + // bbbbbbbb w ffffffff cccccccccccccccc w xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx + // |26 bit| |-117--| |-----142------| + // b = format bit len, o = odd parity of last 3 bits + // f = facility code, c = card number + // w = wiegand parity + // (26 bit format shown) + + uint32_t fc = 0; + uint32_t cardnum = 0; + uint32_t code1 = 0; + uint32_t code2 = 0; + uint8_t fmtLen = bytebits_to_byte(dest,8); + if (fmtLen==26){ + fc = bytebits_to_byte(dest+9, 8); + cardnum = bytebits_to_byte(dest+17, 16); + code1 = bytebits_to_byte(dest+8,fmtLen); + Dbprintf("AWID Found - BitLength: %d, FC: %d, Card: %d - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, fc, cardnum, code1, rawHi2, rawHi, rawLo); + } else { + cardnum = bytebits_to_byte(dest+8+(fmtLen-17), 16); + if (fmtLen>32){ + code1 = bytebits_to_byte(dest+8,fmtLen-32); + code2 = bytebits_to_byte(dest+8+(fmtLen-32),32); + Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x%08x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, code2, rawHi2, rawHi, rawLo); + } else{ + code1 = bytebits_to_byte(dest+8,fmtLen); + Dbprintf("AWID Found - BitLength: %d -unknown BitLength- (%d) - Wiegand: %x, Raw: %08x%08x%08x", fmtLen, cardnum, code1, rawHi2, rawHi, rawLo); } - // reset } + if (findone){ + if (ledcontrol) LED_A_OFF(); + return; + } + // reset idx = 0; WDT_HIT(); } @@ -945,6 +934,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) int clk=0, invert=0, errCnt=0, maxErr=20; uint32_t hi=0; uint64_t lo=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -1004,6 +995,8 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) uint8_t version=0; uint8_t facilitycode=0; uint16_t number=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -1062,62 +1055,11 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) } /*------------------------------ - * T5555/T5557/T5567 routines + * T5555/T5557/T5567/T5577 routines *------------------------------ - */ - -/* T55x7 configuration register definitions */ -#define T55x7_POR_DELAY 0x00000001 -#define T55x7_ST_TERMINATOR 0x00000008 -#define T55x7_PWD 0x00000010 -#define T55x7_MAXBLOCK_SHIFT 5 -#define T55x7_AOR 0x00000200 -#define T55x7_PSKCF_RF_2 0 -#define T55x7_PSKCF_RF_4 0x00000400 -#define T55x7_PSKCF_RF_8 0x00000800 -#define T55x7_MODULATION_DIRECT 0 -#define T55x7_MODULATION_PSK1 0x00001000 -#define T55x7_MODULATION_PSK2 0x00002000 -#define T55x7_MODULATION_PSK3 0x00003000 -#define T55x7_MODULATION_FSK1 0x00004000 -#define T55x7_MODULATION_FSK2 0x00005000 -#define T55x7_MODULATION_FSK1a 0x00006000 -#define T55x7_MODULATION_FSK2a 0x00007000 -#define T55x7_MODULATION_MANCHESTER 0x00008000 -#define T55x7_MODULATION_BIPHASE 0x00010000 -#define T55x7_MODULATION_DIPHASE 0x00018000 -#define T55x7_BITRATE_RF_8 0 -#define T55x7_BITRATE_RF_16 0x00040000 -#define T55x7_BITRATE_RF_32 0x00080000 -#define T55x7_BITRATE_RF_40 0x000C0000 -#define T55x7_BITRATE_RF_50 0x00100000 -#define T55x7_BITRATE_RF_64 0x00140000 -#define T55x7_BITRATE_RF_100 0x00180000 -#define T55x7_BITRATE_RF_128 0x001C0000 - -/* T5555 (Q5) configuration register definitions */ -#define T5555_ST_TERMINATOR 0x00000001 -#define T5555_MAXBLOCK_SHIFT 0x00000001 -#define T5555_MODULATION_MANCHESTER 0 -#define T5555_MODULATION_PSK1 0x00000010 -#define T5555_MODULATION_PSK2 0x00000020 -#define T5555_MODULATION_PSK3 0x00000030 -#define T5555_MODULATION_FSK1 0x00000040 -#define T5555_MODULATION_FSK2 0x00000050 -#define T5555_MODULATION_BIPHASE 0x00000060 -#define T5555_MODULATION_DIRECT 0x00000070 -#define T5555_INVERT_OUTPUT 0x00000080 -#define T5555_PSK_RF_2 0 -#define T5555_PSK_RF_4 0x00000100 -#define T5555_PSK_RF_8 0x00000200 -#define T5555_USE_PWD 0x00000400 -#define T5555_USE_AOR 0x00000800 -#define T5555_BITRATE_SHIFT 12 -#define T5555_FAST_WRITE 0x00004000 -#define T5555_PAGE_SELECT 0x00008000 - -/* - * Relevant times in microsecond + * NOTE: T55x7/T5555 configuration register definitions moved to protocols.h + * + * Relevant communication times in microsecond * To compensate antenna falling times shorten the write times * and enlarge the gap ones. * Q5 tags seems to have issues when these values changes. @@ -1126,21 +1068,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) #define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) #define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) #define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 -#define READ_GAP 52*8 - -// VALUES TAKEN FROM EM4x function: SendForward -// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) -// WRITE_GAP = 128; (16*8) -// WRITE_1 = 256 32*8; (32*8) - -// These timings work for 4469/4269/4305 (with the 55*8 above) -// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); - -// Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK) -// TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz -// Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier) -// T0 = TIMER_CLOCK1 / 125000 = 192 -// 1 Cycle = 8 microseconds(us) == 1 field clock +#define READ_GAP 15*8 void TurnReadLFOn(int delay) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); @@ -1150,19 +1078,48 @@ void TurnReadLFOn(int delay) { // Write one bit to card void T55xxWriteBit(int bit) { - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); if (!bit) - SpinDelayUs(WRITE_0); + TurnReadLFOn(WRITE_0); else - SpinDelayUs(WRITE_1); + TurnReadLFOn(WRITE_1); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(WRITE_GAP); } -// Write one card block in page 0, no lock -void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { +// Send T5577 reset command then read stream (see if we can identify the start of the stream) +void T55xxResetRead(void) { LED_A_ON(); + //clear buffer now so it does not interfere with timing later + BigBuf_Clear_keep_EM(); + + // Set up FPGA, 125kHz + LFSetupFPGAForADC(95, true); + + // Trigger T55x7 in mode. + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelayUs(START_GAP); + + // reset tag - op code 00 + T55xxWriteBit(0); + T55xxWriteBit(0); + + // Turn field on to read the response + TurnReadLFOn(READ_GAP); + + // Acquisition + doT55x7Acquisition(BigBuf_max_traceLen()); + + // Turn the field off + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off + cmd_send(CMD_ACK,0,0,0,0,0); + LED_A_OFF(); +} +// Write one card block in page 0, no lock +void T55xxWriteBlockExt(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { + LED_A_ON(); + bool PwdMode = arg & 0x1; + uint8_t Page = (arg & 0x2)>>1; uint32_t i = 0; // Set up FPGA, 125kHz @@ -1174,8 +1131,8 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Opcode 10 T55xxWriteBit(1); - T55xxWriteBit(0); //Page 0 - if (PwdMode == 1){ + T55xxWriteBit(Page); //Page 0 + if (PwdMode){ // Send Pwd for (i = 0x80000000; i != 0; i >>= 1) T55xxWriteBit(Pwd & i); @@ -1194,18 +1151,29 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550, // so wait a little more) TurnReadLFOn(20 * 1000); + //could attempt to do a read to confirm write took + // as the tag should repeat back the new block + // until it is reset, but to confirm it we would + // need to know the current block 0 config mode // turn field off FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - cmd_send(CMD_ACK,0,0,0,0,0); LED_A_OFF(); } -// Read one card block in page 0 -void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { - LED_A_ON(); +// Write one card block in page 0, no lock +void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t arg) { + T55xxWriteBlockExt(Data, Block, Pwd, arg); + cmd_send(CMD_ACK,0,0,0,0,0); +} +// Read one card block in page [page] +void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { + LED_A_ON(); + bool PwdMode = arg0 & 0x1; + uint8_t Page = (arg0 & 0x2) >> 1; uint32_t i = 0; + bool RegReadMode = (Block == 0xFF); //clear buffer now so it does not interfere with timing later BigBuf_Clear_ext(false); @@ -1213,31 +1181,18 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { //make sure block is at max 7 Block &= 0x7; - // Set up FPGA, 125kHz + // Set up FPGA, 125kHz to power up the tag LFSetupFPGAForADC(95, true); - /* - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); - - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - - // Give it a bit of time for the resonant antenna to settle. - //SpinDelayUs(8*200); //192FC - SpinDelay(50); - */ - // Trigger T55x7 Direct Access Mode + // Trigger T55x7 Direct Access Mode with start gap FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); - // Opcode 10 + // Opcode 1[page] T55xxWriteBit(1); - T55xxWriteBit(0); //Page 0 + T55xxWriteBit(Page); //Page 0 - if (PwdMode == 1){ + if (PwdMode){ // Send Pwd for (i = 0x80000000; i != 0; i >>= 1) T55xxWriteBit(Pwd & i); @@ -1245,15 +1200,16 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { // Send a zero bit separation T55xxWriteBit(0); - // Send Block number - for (i = 0x04; i != 0; i >>= 1) - T55xxWriteBit(Block & i); + // Send Block number (if direct access mode) + if (!RegReadMode) + for (i = 0x04; i != 0; i >>= 1) + T55xxWriteBit(Block & i); // Turn field on to read the response TurnReadLFOn(READ_GAP); // Acquisition - doT55x7Acquisition(); + doT55x7Acquisition(12000); // Turn the field off FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off @@ -1261,44 +1217,44 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { LED_A_OFF(); } -// Read card traceability data (page 1) -void T55xxReadTrace(void){ - LED_A_ON(); - - //clear buffer now so it does not interfere with timing later - BigBuf_Clear_ext(false); - +void T55xxWakeUp(uint32_t Pwd){ + LED_B_ON(); + uint32_t i = 0; + // Set up FPGA, 125kHz LFSetupFPGAForADC(95, true); - - // Trigger T55x7 Direct Access Mode + + // Trigger T55x7 Direct Access Mode FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); - - // Opcode 11 + + // Opcode 10 T55xxWriteBit(1); - T55xxWriteBit(1); //Page 1 - - // Turn field on to read the response - TurnReadLFOn(READ_GAP); + T55xxWriteBit(0); //Page 0 - // Acquisition - doT55x7Acquisition(); + // Send Pwd + for (i = 0x80000000; i != 0; i >>= 1) + T55xxWriteBit(Pwd & i); - // Turn the field off - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - cmd_send(CMD_ACK,0,0,0,0,0); - LED_A_OFF(); + // Turn and leave field on to let the begin repeating transmission + TurnReadLFOn(20*1000); } /*-------------- Cloning routines -----------*/ + +void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) { + // write last block first and config block last (if included) + for (uint8_t i = numblocks+startblock; i > startblock; i--) { + T55xxWriteBlockExt(blockdata[i-1],i-1,0,0); + } +} + // Copy HID id to card and setup block 0 config -void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) -{ - int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format - int last_block = 0; +void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { + uint32_t data[] = {0,0,0,0,0,0,0}; + uint8_t last_block = 0; - if (longFMT){ + if (longFMT) { // Ensure no more than 84 bits supplied if (hi2>0xFFFFF) { DbpString("Tags can only have 84 bits."); @@ -1306,140 +1262,100 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) } // Build the 6 data blocks for supplied 84bit ID last_block = 6; - data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded) - for (int i=0;i<4;i++) { - if (hi2 & (1<<(19-i))) - data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10 - else - data1 |= (1<<((3-i)*2)); // 0 -> 01 - } - - data2 = 0; - for (int i=0;i<16;i++) { - if (hi2 & (1<<(15-i))) - data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data2 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data3 = 0; - for (int i=0;i<16;i++) { - if (hi & (1<<(31-i))) - data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data3 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data4 = 0; - for (int i=0;i<16;i++) { - if (hi & (1<<(15-i))) - data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data4 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data5 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(31-i))) - data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data5 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data6 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(15-i))) - data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data6 |= (1<<((15-i)*2)); // 0 -> 01 - } - } - else { + // load preamble (1D) & long format identifier (9E manchester encoded) + data[1] = 0x1D96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF); + // load raw id from hi2, hi, lo to data blocks (manchester encoded) + data[2] = manchesterEncode2Bytes(hi2 & 0xFFFF); + data[3] = manchesterEncode2Bytes(hi >> 16); + data[4] = manchesterEncode2Bytes(hi & 0xFFFF); + data[5] = manchesterEncode2Bytes(lo >> 16); + data[6] = manchesterEncode2Bytes(lo & 0xFFFF); + } else { // Ensure no more than 44 bits supplied if (hi>0xFFF) { DbpString("Tags can only have 44 bits."); return; } - // Build the 3 data blocks for supplied 44bit ID last_block = 3; - - data1 = 0x1D000000; // load preamble - - for (int i=0;i<12;i++) { - if (hi & (1<<(11-i))) - data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10 - else - data1 |= (1<<((11-i)*2)); // 0 -> 01 - } - - data2 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(31-i))) - data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data2 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data3 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(15-i))) - data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data3 |= (1<<((15-i)*2)); // 0 -> 01 - } + // load preamble + data[1] = 0x1D000000 | (manchesterEncode2Bytes(hi) & 0xFFFFFF); + data[2] = manchesterEncode2Bytes(lo >> 16); + data[3] = manchesterEncode2Bytes(lo & 0xFFFF); } + // load chip config block + data[0] = T55x7_BITRATE_RF_50 | T55x7_MODULATION_FSK2a | last_block << T55x7_MAXBLOCK_SHIFT; + + //TODO add selection of chip for Q5 or T55x7 + // data[0] = (((50-2)/2)<> 32), 1, 0, 0); - T55xxWriteBlock((uint32_t)id, 2, 0, 0); - - // Config for EM410x (RF/64, Manchester, Maxblock=2) - if (card) { - // Clock rate is stored in bits 8-15 of the card value - clock = (card & 0xFF00) >> 8; - Dbprintf("Clock rate: %d", clock); - switch (clock) { - case 50: - clock = T55x7_BITRATE_RF_50; - case 40: - clock = T55x7_BITRATE_RF_40; - case 32: - clock = T55x7_BITRATE_RF_32; - break; - case 16: - clock = T55x7_BITRATE_RF_16; - break; - case 0: - // A value of 0 is assumed to be 64 for backwards-compatibility - // Fall through... - case 64: - clock = T55x7_BITRATE_RF_64; - break; - default: + uint32_t data[] = {0, id>>32, id & 0xFFFFFFFF}; + + clock = (card & 0xFF00) >> 8; + clock = (clock == 0) ? 64 : clock; + Dbprintf("Clock rate: %d", clock); + if (card & 0xFF) { //t55x7 + clock = GetT55xxClockBit(clock); + if (clock == 0) { Dbprintf("Invalid clock rate: %d", clock); return; } - - // Writing configuration for T55x7 tag - T55xxWriteBlock(clock | - T55x7_MODULATION_MANCHESTER | - 2 << T55x7_MAXBLOCK_SHIFT, - 0, 0, 0); + data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT); + } else { //t5555 (Q5) + clock = (clock-2)>>1; //n = (RF-2)/2 + data[0] = (clock << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT); } - else - // Writing configuration for T5555(Q5) tag - T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT | - T5555_MODULATION_MANCHESTER | - 2 << T5555_MAXBLOCK_SHIFT, - 0, 0, 0); + + WriteT55xx(data, 0, 3); LED_D_OFF(); Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555", (uint32_t)(id >> 32), (uint32_t)id); } -// Clone Indala 64-bit tag by UID to T55x7 -void CopyIndala64toT55x7(int hi, int lo) -{ - - //Program the 2 data blocks for supplied 64bit UID - // and the block 0 for Indala64 format - T55xxWriteBlock(hi,1,0,0); - T55xxWriteBlock(lo,2,0,0); - //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2) - T55xxWriteBlock(T55x7_BITRATE_RF_32 | - T55x7_MODULATION_PSK1 | - 2 << T55x7_MAXBLOCK_SHIFT, - 0, 0, 0); - //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data) - // T5567WriteBlock(0x603E1042,0); - - DbpString("DONE!"); - -} - -void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7) -{ - - //Program the 7 data blocks for supplied 224bit UID - // and the block 0 for Indala224 format - T55xxWriteBlock(uid1,1,0,0); - T55xxWriteBlock(uid2,2,0,0); - T55xxWriteBlock(uid3,3,0,0); - T55xxWriteBlock(uid4,4,0,0); - T55xxWriteBlock(uid5,5,0,0); - T55xxWriteBlock(uid6,6,0,0); - T55xxWriteBlock(uid7,7,0,0); - //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7) - T55xxWriteBlock(T55x7_BITRATE_RF_32 | - T55x7_MODULATION_PSK1 | - 7 << T55x7_MAXBLOCK_SHIFT, - 0,0,0); - //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data) - // T5567WriteBlock(0x603E10E2,0); - - DbpString("DONE!"); - -} - //----------------------------------- // EM4469 / EM4305 routines //----------------------------------- @@ -1599,7 +1447,6 @@ void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int #define FWD_CMD_READ 0x9 #define FWD_CMD_DISABLE 0x5 - uint8_t forwardLink_data[64]; //array of forwarded bits uint8_t * forward_ptr; //ptr for forward message preparation uint8_t fwd_bit_sz; //forwardlink bit counter @@ -1610,8 +1457,15 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer // see EM4469 spec //==================================================================== //-------------------------------------------------------------------- +// VALUES TAKEN FROM EM4x function: SendForward +// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) +// WRITE_GAP = 128; (16*8) +// WRITE_1 = 256 32*8; (32*8) + +// These timings work for 4469/4269/4305 (with the 55*8 above) +// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); + uint8_t Prepare_Cmd( uint8_t cmd ) { - //-------------------------------------------------------------------- *forward_ptr++ = 0; //start bit *forward_ptr++ = 0; //second pause for 4050 code @@ -1631,10 +1485,7 @@ uint8_t Prepare_Cmd( uint8_t cmd ) { // prepares address bits // see EM4469 spec //==================================================================== - -//-------------------------------------------------------------------- uint8_t Prepare_Addr( uint8_t addr ) { - //-------------------------------------------------------------------- register uint8_t line_parity; @@ -1655,10 +1506,7 @@ uint8_t Prepare_Addr( uint8_t addr ) { // prepares data bits intreleaved with parity bits // see EM4469 spec //==================================================================== - -//-------------------------------------------------------------------- uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) { - //-------------------------------------------------------------------- register uint8_t line_parity; register uint8_t column_parity; @@ -1710,7 +1558,6 @@ void SendForward(uint8_t fwd_bit_count) { fwd_write_ptr++; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off SpinDelayUs(55*8); //55 cycles off (8us each)for 4305 - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on SpinDelayUs(16*8); //16 cycles on (8us each) @@ -1722,7 +1569,6 @@ void SendForward(uint8_t fwd_bit_count) { //These timings work for 4469/4269/4305 (with the 55*8 above) FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off SpinDelayUs(23*8); //16-4 cycles off (8us each) - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on SpinDelayUs(9*8); //16 cycles on (8us each) } @@ -1741,7 +1587,6 @@ void EM4xLogin(uint32_t Password) { //Wait for command to complete SpinDelay(20); - } void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { @@ -1752,7 +1597,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { uint32_t i = 0; // Clear destination buffer before sending the command - memset(dest, 0x80, bufferlength); + BigBuf_Clear_ext(false); //If password mode do login if (PwdMode == 1) EM4xLogin(Pwd);