X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/2c39c25c67ef9db6693a895df0780ff8fd09e481..0db11b71efad3781186cc2da9f31686a6562d065:/common/protocols.h diff --git a/common/protocols.h b/common/protocols.h index 62cfb7ff..875b0af0 100644 --- a/common/protocols.h +++ b/common/protocols.h @@ -31,6 +31,9 @@ ISO14443B 05 = REQB 1D = ATTRIB 50 = HALT + + BA = PING (reader -> tag) + AB = PONG (tag -> reader) SRIX4K (tag does not respond to 05) 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) @@ -88,7 +91,29 @@ NXP/Philips CUSTOM COMMANDS BA = Enable Privacy BB = 64bit Password Protection 40 = Long Range CMD (Standard ISO/TR7003:1990) - */ + +ISO 7816-4 Basic interindustry commands. For command APDU's. + B0 = READ BINARY + D0 = WRITE BINARY + D6 = UPDATE BINARY + 0E = ERASE BINARY + B2 = READ RECORDS + D2 = WRITE RECORDS + E2 = APPEND RECORD + DC = UPDATE RECORD + CA = GET DATA + DA = PUT DATA + A4 = SELECT FILE + 20 = VERIFY + 88 = INTERNAL AUTHENTICATION + 82 = EXTERNAL AUTHENTICATION + B4 = GET CHALLENGE + 70 = MANAGE CHANNEL + + For response APDU's + 90 00 = OK + 6x xx = ERROR +*/ #define ICLASS_CMD_ACTALL 0x0A #define ICLASS_CMD_READ_OR_IDENTIFY 0x0C @@ -123,8 +148,12 @@ NXP/Philips CUSTOM COMMANDS #define MIFARE_CMD_RESTORE 0xC2 #define MIFARE_CMD_TRANSFER 0xB0 -#define MIFARE_ULC_WRITE 0xA2 -//#define MIFARE_ULC_COMP_WRITE 0xA0 +#define MIFARE_EV1_PERSONAL_UID 0x40 +#define MIFARE_EV1_SETMODE 0x43 + + +#define MIFARE_ULC_WRITE 0xA2 +//#define MIFARE_ULC__COMP_WRITE 0xA0 #define MIFARE_ULC_AUTH_1 0x1A #define MIFARE_ULC_AUTH_2 0xAF @@ -137,6 +166,23 @@ NXP/Philips CUSTOM COMMANDS #define MIFARE_ULEV1_CHECKTEAR 0x3E #define MIFARE_ULEV1_VCSL 0x4B + +// Magic Generation 1, parameter "work flags" +// bit 0 - need get UID +// bit 1 - send wupC (wakeup chinese) +// bit 2 - send HALT cmd after sequence +// bit 3 - turn on FPGA +// bit 4 - turn off FPGA +// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a) +#define MAGIC_UID 0x01 +#define MAGIC_WUPC 0x02 +#define MAGIC_HALT 0x04 +#define MAGIC_INIT 0x08 +#define MAGIC_OFF 0x10 +#define MAGIC_DATAIN 0x20 +#define MAGIC_WIPE 0x40 +#define MAGIC_SINGLE (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E + /** 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) @@ -159,6 +205,8 @@ NXP/Philips CUSTOM COMMANDS #define ISO14443B_RESET 0x0C #define ISO14443B_COMPLETION 0x0F #define ISO14443B_AUTHENTICATE 0x0A +#define ISO14443B_PING 0xBA +#define ISO14443B_PONG 0xAB //First byte is 26 #define ISO15693_INVENTORY 0x01 @@ -193,10 +241,11 @@ NXP/Philips CUSTOM COMMANDS #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) -#define ISO_14443A 0 -#define ICLASS 1 -#define ISO_14443B 2 +#define ISO_14443A 0 +#define ICLASS 1 +#define ISO_14443B 2 #define TOPAZ 3 +#define ISO_7816_4 4 //-- Picopass fuses #define FUSE_FPERS 0x80 @@ -208,7 +257,82 @@ NXP/Philips CUSTOM COMMANDS #define FUSE_FPROD0 0x02 #define FUSE_RA 0x01 +// ISO 7816-4 Basic interindustry commands. For command APDU's. +#define ISO7816_READ_BINARY 0xB0 +#define ISO7816_WRITE_BINARY 0xD0 +#define ISO7816_UPDATE_BINARY 0xD6 +#define ISO7816_ERASE_BINARY 0x0E +#define ISO7816_READ_RECORDS 0xB2 +#define ISO7816_WRITE_RECORDS 0xD2 +#define ISO7816_APPEND_RECORD 0xE2 +#define ISO7816_UPDATE_RECORD 0xDC +#define ISO7816_GET_DATA 0xCA +#define ISO7816_PUT_DATA 0xDA +#define ISO7816_SELECT_FILE 0xA4 +#define ISO7816_VERIFY 0x20 +#define ISO7816_INTERNAL_AUTHENTICATION 0x88 +#define ISO7816_EXTERNAL_AUTHENTICATION 0x82 +#define ISO7816_GET_CHALLENGE 0xB4 +#define ISO7816_MANAGE_CHANNEL 0x70 +// ISO7816-4 For response APDU's +#define ISO7816_OK 0x9000 +// 6x xx = ERROR + void printIclassDumpInfo(uint8_t* iclass_dump); +void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb); + +/* T55x7 configuration register definitions */ +#define T55x7_POR_DELAY 0x00000001 +#define T55x7_ST_TERMINATOR 0x00000008 +#define T55x7_PWD 0x00000010 +#define T55x7_MAXBLOCK_SHIFT 5 +#define T55x7_AOR 0x00000200 +#define T55x7_PSKCF_RF_2 0 +#define T55x7_PSKCF_RF_4 0x00000400 +#define T55x7_PSKCF_RF_8 0x00000800 +#define T55x7_MODULATION_DIRECT 0 +#define T55x7_MODULATION_PSK1 0x00001000 +#define T55x7_MODULATION_PSK2 0x00002000 +#define T55x7_MODULATION_PSK3 0x00003000 +#define T55x7_MODULATION_FSK1 0x00004000 +#define T55x7_MODULATION_FSK2 0x00005000 +#define T55x7_MODULATION_FSK1a 0x00006000 +#define T55x7_MODULATION_FSK2a 0x00007000 +#define T55x7_MODULATION_MANCHESTER 0x00008000 +#define T55x7_MODULATION_BIPHASE 0x00010000 +#define T55x7_MODULATION_DIPHASE 0x00018000 +#define T55x7_BITRATE_RF_8 0 +#define T55x7_BITRATE_RF_16 0x00040000 +#define T55x7_BITRATE_RF_32 0x00080000 +#define T55x7_BITRATE_RF_40 0x000C0000 +#define T55x7_BITRATE_RF_50 0x00100000 +#define T55x7_BITRATE_RF_64 0x00140000 +#define T55x7_BITRATE_RF_100 0x00180000 +#define T55x7_BITRATE_RF_128 0x001C0000 + +/* T5555 (Q5) configuration register definitions */ +#define T5555_ST_TERMINATOR 0x00000001 +#define T5555_MAXBLOCK_SHIFT 0x00000001 +#define T5555_MODULATION_MANCHESTER 0 +#define T5555_MODULATION_PSK1 0x00000010 +#define T5555_MODULATION_PSK2 0x00000020 +#define T5555_MODULATION_PSK3 0x00000030 +#define T5555_MODULATION_FSK1 0x00000040 +#define T5555_MODULATION_FSK2 0x00000050 +#define T5555_MODULATION_BIPHASE 0x00000060 +#define T5555_MODULATION_DIRECT 0x00000070 +#define T5555_INVERT_OUTPUT 0x00000080 +#define T5555_PSK_RF_2 0 +#define T5555_PSK_RF_4 0x00000100 +#define T5555_PSK_RF_8 0x00000200 +#define T5555_USE_PWD 0x00000400 +#define T5555_USE_AOR 0x00000800 +#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2 +#define T5555_FAST_WRITE 0x00004000 +#define T5555_PAGE_SELECT 0x00008000 + +uint32_t GetT55xxClockBit(uint32_t clock); -#endif // PROTOCOLS_H +#endif +// PROTOCOLS_H