X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/38b65694d61805baa4f0f0d55949d183462b18a7..2e68bd40651f4d451135999f91d39ee68ea57407:/armsrc/appmain.c?ds=inline diff --git a/armsrc/appmain.c b/armsrc/appmain.c index e7b868bd..72d8789e 100644 --- a/armsrc/appmain.c +++ b/armsrc/appmain.c @@ -5,7 +5,6 @@ // Edits by Gerhard de Koning Gans, Sep 2007 (##) //----------------------------------------------------------------------------- - #include #include #include "apps.h" @@ -14,9 +13,6 @@ #include "LCD.h" #endif -// The large multi-purpose buffer, typically used to hold A/D samples, -// maybe pre-processed in some way. -DWORD BigBuf[16000]; //============================================================================= // A buffer where we can queue things up to be sent through the FPGA, for @@ -28,7 +24,6 @@ BYTE ToSend[256]; int ToSendMax; static int ToSendBit; - void BufferClear(void) { memset(BigBuf,0,sizeof(BigBuf)); @@ -67,6 +62,10 @@ void ToSendStuffBit(int b) void DbpString(char *str) { + /* this holds up stuff unless we're connected to usb */ + if (!UsbConnected()) + return; + UsbCommand c; c.cmd = CMD_DEBUG_PRINT_STRING; c.ext1 = strlen(str); @@ -79,6 +78,10 @@ void DbpString(char *str) void DbpIntegers(int x1, int x2, int x3) { + /* this holds up stuff unless we're connected to usb */ + if (!UsbConnected()) + return; + UsbCommand c; c.cmd = CMD_DEBUG_PRINT_INTEGERS; c.ext1 = x1; @@ -90,113 +93,6 @@ void DbpIntegers(int x1, int x2, int x3) SpinDelay(50); } -void AcquireRawAdcSamples125k(BOOL at134khz) -{ - if(at134khz) { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_134_KHZ); - } else { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_125_KHZ); - } - - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); - - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - - // Now call the acquisition routine - DoAcquisition125k(at134khz); -} - -// split into two routines so we can avoid timing issues after sending commands // -void DoAcquisition125k(BOOL at134khz) -{ - BYTE *dest = (BYTE *)BigBuf; - int n = sizeof(BigBuf); - int i; - - memset(dest,0,n); - i = 0; - for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0x43; - LED_D_ON(); - } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - dest[i] = (BYTE)SSC_RECEIVE_HOLDING; - i++; - LED_D_OFF(); - if(i >= n) { - break; - } - } - } - DbpIntegers(dest[0], dest[1], at134khz); -} - -void ModThenAcquireRawAdcSamples125k(int delay_off,int period_0,int period_1,BYTE *command) -{ - BOOL at134khz; - - // see if 'h' was specified - if(command[strlen(command) - 1] == 'h') - at134khz= TRUE; - else - at134khz= FALSE; - - if(at134khz) { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_134_KHZ); - } else { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_125_KHZ); - } - - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); - - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - - // now modulate the reader field - while(*command != '\0' && *command != ' ') - { - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - LED_D_OFF(); - SpinDelayUs(delay_off); - if(at134khz) { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_134_KHZ); - } else { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_125_KHZ); - } - LED_D_ON(); - if(*(command++) == '0') - SpinDelayUs(period_0); - else - SpinDelayUs(period_1); - } - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - LED_D_OFF(); - SpinDelayUs(delay_off); - if(at134khz) { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_134_KHZ); - } else { - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_125_KHZ); - } - - // now do the read - DoAcquisition125k(at134khz); -} - //----------------------------------------------------------------------------- // Read an ADC channel and block till it completes, then return the result // in ADC units (0 to 1023). Also a routine to average 32 samples and @@ -231,459 +127,402 @@ static int AvgAdc(int ch) return (a + 15) >> 5; } -/* - * Sweeps the useful LF range of the proxmark from - * 46.8kHz (divisor=255) to 600kHz (divisor=19) and - * reads the voltage in the antenna: the result is a graph - * which should clearly show the resonating frequency of your - * LF antenna ( hopefully around 90 if it is tuned to 125kHz!) - */ -void SweepLFrange() +void MeasureAntennaTuning(void) { BYTE *dest = (BYTE *)BigBuf; - BYTE dummy[12]; - int i, peak= 0, ptr= 0; - double freq; + int i, ptr = 0, adcval = 0, peak = 0, peakv = 0, peakf = 0;; + int vLf125 = 0, vLf134 = 0, vHf = 0; // in mV + + UsbCommand c; - // clear buffer + DbpString("Measuring antenna characteristics, please wait."); memset(BigBuf,0,sizeof(BigBuf)); +/* + * Sweeps the useful LF range of the proxmark from + * 46.8kHz (divisor=255) to 600kHz (divisor=19) and + * read the voltage in the antenna, the result left + * in the buffer is a graph which should clearly show + * the resonating frequency of your LF antenna + * ( hopefully around 95 if it is tuned to 125kHz!) + */ FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER); for (i=255; i>19; i--) { FpgaSendCommand(FPGA_CMD_SET_DIVISOR, i); SpinDelay(20); - dest[i] = (137500 * AvgAdc(ADC_CHAN_LF)) >> 18; + // Vref = 3.3V, and a 10000:240 voltage divider on the input + // can measure voltages up to 137500 mV + adcval = ((137500 * AvgAdc(ADC_CHAN_LF)) >> 10); + if (i==95) vLf125 = adcval; // voltage at 125Khz + if (i==89) vLf134 = adcval; // voltage at 134Khz + + dest[i] = adcval>>8; // scale int to fit in byte for graphing purposes if(dest[i] > peak) { - peak= dest[i]; - ptr= i; - } - } - dummy[11]= '\0'; - dummy[10]= 'z'; - dummy[9]= 'H'; - dummy[8]= 'k'; - dummy[7]= ' '; - freq= 12000000/(ptr + 1); - for(i= 6; i > 3 ; --i) { - dummy[i]= '0' + ((int) freq) % 10; - freq /= 10; + peakv = adcval; + peak = dest[i]; + peakf = i; + ptr = i; } - dummy[3]= '.'; - for(i= 2; i >= 0 ; --i) { - dummy[i]= '0' + ((int) freq) % 10; - freq /= 10; - } - DbpString("Antenna resonates at:"); - DbpString(dummy); -} - -void MeasureAntennaTuning(void) -{ -// Impedances are Zc = 1/(j*omega*C), in ohms -#define LF_TUNING_CAP_Z 1273 // 1 nF @ 125 kHz -#define HF_TUNING_CAP_Z 235 // 50 pF @ 13.56 MHz - - int vLf125, vLf134, vHf; // in mV - - UsbCommand c; - - // Let the FPGA drive the low-frequency antenna around 125 kHz. - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_125_KHZ); - SpinDelay(20); - vLf125 = AvgAdc(ADC_CHAN_LF); - // Vref = 3.3V, and a 10000:240 voltage divider on the input - // can measure voltages up to 137500 mV - vLf125 = (137500 * vLf125) >> 10; - - // Let the FPGA drive the low-frequency antenna around 134 kHz. - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_134_KHZ); - SpinDelay(20); - vLf134 = AvgAdc(ADC_CHAN_LF); - // Vref = 3.3V, and a 10000:240 voltage divider on the input - // can measure voltages up to 137500 mV - vLf134 = (137500 * vLf134) >> 10; + } // Let the FPGA drive the high-frequency antenna around 13.56 MHz. FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR); SpinDelay(20); - vHf = AvgAdc(ADC_CHAN_HF); // Vref = 3300mV, and an 10:1 voltage divider on the input // can measure voltages up to 33000 mV - vHf = (33000 * vHf) >> 10; + vHf = (33000 * AvgAdc(ADC_CHAN_HF)) >> 10; c.cmd = CMD_MEASURED_ANTENNA_TUNING; c.ext1 = (vLf125 << 0) | (vLf134 << 16); c.ext2 = vHf; - c.ext3 = (LF_TUNING_CAP_Z << 0) | (HF_TUNING_CAP_Z << 16); + c.ext3 = peakf | (peakv << 16); UsbSendPacket((BYTE *)&c, sizeof(c)); } -void SimulateTagLowFrequency(int period) +void SimulateTagHfListen(void) { + BYTE *dest = (BYTE *)BigBuf; + int n = sizeof(BigBuf); + BYTE v = 0; int i; - BYTE *tab = (BYTE *)BigBuf; - - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR); + int p = 0; - PIO_ENABLE = (1 << GPIO_SSC_DOUT) | (1 << GPIO_SSC_CLK); + // We're using this mode just so that I can test it out; the simulated + // tag mode would work just as well and be simpler. + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP); - PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT); - PIO_OUTPUT_DISABLE = (1 << GPIO_SSC_CLK); + // We need to listen to the high-frequency, peak-detected path. + SetAdcMuxFor(GPIO_MUXSEL_HIPKD); -#define SHORT_COIL() LOW(GPIO_SSC_DOUT) -#define OPEN_COIL() HIGH(GPIO_SSC_DOUT) + FpgaSetupSsc(); i = 0; for(;;) { - while(!(PIO_PIN_DATA_STATUS & (1<= 8) { + dest[i] = v; + v = 0; + p = 0; + i++; + + if(i >= n) { + break; + } } - WDT_HIT(); } - - i++; - if(i == period) i = 0; } + DbpString("simulate tag (now type bitsamples)"); } -// compose fc/8 fc/10 waveform -static void fc(int c, int *n) { - BYTE *dest = (BYTE *)BigBuf; - int idx; - - // for when we want an fc8 pattern every 4 logical bits - if(c==0) { - dest[((*n)++)]=1; - dest[((*n)++)]=1; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - } - // an fc/8 encoded bit is a bit pattern of 11000000 x6 = 48 samples - if(c==8) { - for (idx=0; idx<6; idx++) { - dest[((*n)++)]=1; - dest[((*n)++)]=1; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - } - } +void ReadMem(int addr) +{ + const DWORD *data = ((DWORD *)addr); + int i; - // an fc/10 encoded bit is a bit pattern of 1110000000 x5 = 50 samples - if(c==10) { - for (idx=0; idx<5; idx++) { - dest[((*n)++)]=1; - dest[((*n)++)]=1; - dest[((*n)++)]=1; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - dest[((*n)++)]=0; - } - } + DbpString("Reading memory at address"); + DbpIntegers(0, 0, addr); + for (i = 0; i < 8; i+= 2) + DbpIntegers(0, data[i], data[i+1]); } -// prepare a waveform pattern in the buffer based on the ID given then -// simulate a HID tag until the button is pressed -static void CmdHIDsimTAG(int hi, int lo) +/* osimage version information is linked in */ +extern struct version_information version_information; +/* bootrom version information is pointed to from _bootphase1_version_pointer */ +extern char _bootphase1_version_pointer, _flash_start, _flash_end; +void SendVersion(void) { - int n=0, i=0; - /* - HID tag bitstream format - The tag contains a 44bit unique code. This is sent out MSB first in sets of 4 bits - A 1 bit is represented as 6 fc8 and 5 fc10 patterns - A 0 bit is represented as 5 fc10 and 6 fc8 patterns - A fc8 is inserted before every 4 bits - A special start of frame pattern is used consisting a0b0 where a and b are neither 0 - nor 1 bits, they are special patterns (a = set of 12 fc8 and b = set of 10 fc10) - */ - - if (hi>0xFFF) { - DbpString("Tags can only have 44 bits."); - return; - } - fc(0,&n); - // special start of frame marker containing invalid bit sequences - fc(8, &n); fc(8, &n); // invalid - fc(8, &n); fc(10, &n); // logical 0 - fc(10, &n); fc(10, &n); // invalid - fc(8, &n); fc(10, &n); // logical 0 - - WDT_HIT(); - // manchester encode bits 43 to 32 - for (i=11; i>=0; i--) { - if ((i%4)==3) fc(0,&n); - if ((hi>>i)&1) { - fc(10, &n); fc(8, &n); // low-high transition - } else { - fc(8, &n); fc(10, &n); // high-low transition - } - } - - WDT_HIT(); - // manchester encode bits 31 to 0 - for (i=31; i>=0; i--) { - if ((i%4)==3) fc(0,&n); - if ((lo>>i)&1) { - fc(10, &n); fc(8, &n); // low-high transition - } else { - fc(8, &n); fc(10, &n); // high-low transition - } + char temp[48]; /* Limited data payload in USB packets */ + DbpString("Prox/RFID mark3 RFID instrument"); + + /* Try to find the bootrom version information. Expect to find a pointer at + * symbol _bootphase1_version_pointer, perform slight sanity checks on the + * pointer, then use it. + */ + void *bootrom_version = *(void**)&_bootphase1_version_pointer; + if( bootrom_version < (void*)&_flash_start || bootrom_version >= (void*)&_flash_end ) { + DbpString("bootrom version information appears invalid"); + } else { + FormatVersionInformation(temp, sizeof(temp), "bootrom: ", bootrom_version); + DbpString(temp); } - - LED_A_ON(); - SimulateTagLowFrequency(n); - LED_A_OFF(); + + FormatVersionInformation(temp, sizeof(temp), "os: ", &version_information); + DbpString(temp); + + FpgaGatherVersion(temp, sizeof(temp)); + DbpString(temp); } -// loop to capture raw HID waveform then FSK demodulate the TAG ID from it -static void CmdHIDdemodFSK(void) +// samy's sniff and repeat routine +void SamyRun() { - BYTE *dest = (BYTE *)BigBuf; - int m=0, n=0, i=0, idx=0, found=0, lastval=0; - DWORD hi=0, lo=0; + DbpString("Stand-alone mode! No PC necessary."); - FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER | FPGA_LF_READER_USE_125_KHZ); + // 3 possible options? no just 2 for now +#define OPTS 2 - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); + int high[OPTS], low[OPTS]; - // Give it a bit of time for the resonant antenna to settle. - SpinDelay(50); + // Oooh pretty -- notify user we're in elite samy mode now + LED(LED_RED, 200); + LED(LED_ORANGE, 200); + LED(LED_GREEN, 200); + LED(LED_ORANGE, 200); + LED(LED_RED, 200); + LED(LED_ORANGE, 200); + LED(LED_GREEN, 200); + LED(LED_ORANGE, 200); + LED(LED_RED, 200); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); + int selected = 0; + int playing = 0; - for(;;) { + // Turn on selected LED + LED(selected + 1, 0); + + for (;;) + { + UsbPoll(FALSE); WDT_HIT(); - LED_A_ON(); - if(BUTTON_PRESS()) { - LED_A_OFF(); - return; - } - i = 0; - m = sizeof(BigBuf); - memset(dest,128,m); - for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0x43; - LED_D_ON(); - } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - dest[i] = (BYTE)SSC_RECEIVE_HOLDING; - // we don't care about actual value, only if it's more or less than a - // threshold essentially we capture zero crossings for later analysis - if(dest[i] < 127) dest[i] = 0; else dest[i] = 1; - i++; - LED_D_OFF(); - if(i >= m) { - break; - } - } - } + // Was our button held down or pressed? + int button_pressed = BUTTON_HELD(1000); + SpinDelay(300); - // FSK demodulator + // Button was held for a second, begin recording + if (button_pressed > 0) + { + LEDsoff(); + LED(selected + 1, 0); + LED(LED_RED2, 0); - // sync to first lo-hi transition - for( idx=1; idx>1)&0xffff); - hi=0; - lo=0; - found=0; - } - } - if (found) { - if (dest[idx] && (!dest[idx+1]) ) { - hi=(hi<<1)|(lo>>31); - lo=(lo<<1)|0; - } else if ( (!dest[idx]) && dest[idx+1]) { - hi=(hi<<1)|(lo>>31); - lo=(lo<<1)|1; - } else { - found=0; - hi=0; - lo=0; - } - idx++; - } - if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) ) + // Change where to record (or begin playing) + else if (button_pressed) + { + // Next option if we were previously playing + if (playing) + selected = (selected + 1) % OPTS; + playing = !playing; + + LEDsoff(); + LED(selected + 1, 0); + + // Begin transmitting + if (playing) { - found=1; - idx+=6; - if (found && (hi|lo)) { - DbpString("TAG ID"); - DbpIntegers(hi, lo, (lo>>1)&0xffff); - hi=0; - lo=0; - found=0; - } + LED(LED_GREEN, 0); + DbpString("Playing"); + // wait for button to be released + while(BUTTON_PRESS()) + WDT_HIT(); + DbpIntegers(selected, high[selected], low[selected]); + CmdHIDsimTAG(high[selected], low[selected], 0); + DbpString("Done playing"); + if (BUTTON_HELD(1000) > 0) + { + DbpString("Exiting"); + LEDsoff(); + return; + } + + /* We pressed a button so ignore it here with a delay */ + SpinDelay(300); + + // when done, we're done playing, move to next option + selected = (selected + 1) % OPTS; + playing = !playing; + LEDsoff(); + LED(selected + 1, 0); } + else + while(BUTTON_PRESS()) + WDT_HIT(); } - WDT_HIT(); } } -void SimulateTagHfListen(void) + +/* +OBJECTIVE +Listen and detect an external reader. Determine the best location +for the antenna. + +INSTRUCTIONS: +Inside the ListenReaderField() function, there is two mode. +By default, when you call the function, you will enter mode 1. +If you press the PM3 button one time, you will enter mode 2. +If you press the PM3 button a second time, you will exit the function. + +DESCRIPTION OF MODE 1: +This mode just listens for an external reader field and lights up green +for HF and/or red for LF. This is the original mode of the detectreader +function. + +DESCRIPTION OF MODE 2: +This mode will visually represent, using the LEDs, the actual strength of the +current compared to the maximum current detected. Basically, once you know +what kind of external reader is present, it will help you spot the best location to place +your antenna. You will probably not get some good results if there is a LF and a HF reader +at the same place! :-) + +LIGHT SCHEME USED: +*/ +static const char LIGHT_SCHEME[] = { + 0x0, /* ---- | No field detected */ + 0x1, /* X--- | 14% of maximum current detected */ + 0x2, /* -X-- | 29% of maximum current detected */ + 0x4, /* --X- | 43% of maximum current detected */ + 0x8, /* ---X | 57% of maximum current detected */ + 0xC, /* --XX | 71% of maximum current detected */ + 0xE, /* -XXX | 86% of maximum current detected */ + 0xF, /* XXXX | 100% of maximum current detected */ +}; +static const int LIGHT_LEN = sizeof(LIGHT_SCHEME)/sizeof(LIGHT_SCHEME[0]); + +void ListenReaderField(int limit) { - BYTE *dest = (BYTE *)BigBuf; - int n = sizeof(BigBuf); - BYTE v = 0; - int i; - int p = 0; + int lf_av, lf_av_new, lf_baseline= 0, lf_count= 0, lf_max; + int hf_av, hf_av_new, hf_baseline= 0, hf_count= 0, hf_max; + int mode=1, display_val, display_max, i; - // We're using this mode just so that I can test it out; the simulated - // tag mode would work just as well and be simpler. - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP); +#define LF_ONLY 1 +#define HF_ONLY 2 - // We need to listen to the high-frequency, peak-detected path. - SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + LEDsoff(); - FpgaSetupSsc(); + lf_av=lf_max=ReadAdc(ADC_CHAN_LF); + + if(limit != HF_ONLY) { + DbpString("LF 125/134 Baseline:"); + DbpIntegers(lf_av,0,0); + lf_baseline= lf_av; + } + + hf_av=hf_max=ReadAdc(ADC_CHAN_HF); + + if (limit != LF_ONLY) { + DbpString("HF 13.56 Baseline:"); + DbpIntegers(hf_av,0,0); + hf_baseline= hf_av; + } - i = 0; for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0xff; + if (BUTTON_PRESS()) { + SpinDelay(500); + switch (mode) { + case 1: + mode=2; + DbpString("Signal Strength Mode"); + break; + case 2: + default: + DbpString("Stopped"); + LEDsoff(); + return; + break; + } } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - BYTE r = (BYTE)SSC_RECEIVE_HOLDING; + WDT_HIT(); - v <<= 1; - if(r & 1) { - v |= 1; + if (limit != HF_ONLY) { + if(mode==1) { + if (abs(lf_av - lf_baseline) > 10) LED_D_ON(); + else LED_D_OFF(); } - p++; - - if(p >= 8) { - dest[i] = v; - v = 0; - p = 0; - i++; + + ++lf_count; + lf_av_new= ReadAdc(ADC_CHAN_LF); + // see if there's a significant change + if(abs(lf_av - lf_av_new) > 10) { + DbpString("LF 125/134 Field Change:"); + DbpIntegers(lf_av,lf_av_new,lf_count); + lf_av= lf_av_new; + if (lf_av > lf_max) + lf_max = lf_av; + lf_count= 0; + } + } - if(i >= n) { + if (limit != LF_ONLY) { + if (mode == 1){ + if (abs(hf_av - hf_baseline) > 10) LED_B_ON(); + else LED_B_OFF(); + } + + ++hf_count; + hf_av_new= ReadAdc(ADC_CHAN_HF); + // see if there's a significant change + if(abs(hf_av - hf_av_new) > 10) { + DbpString("HF 13.56 Field Change:"); + DbpIntegers(hf_av,hf_av_new,hf_count); + hf_av= hf_av_new; + if (hf_av > hf_max) + hf_max = hf_av; + hf_count= 0; + } + } + + if(mode == 2) { + if (limit == LF_ONLY) { + display_val = lf_av; + display_max = lf_max; + } else if (limit == HF_ONLY) { + display_val = hf_av; + display_max = hf_max; + } else { /* Pick one at random */ + if( (hf_max - hf_baseline) > (lf_max - lf_baseline) ) { + display_val = hf_av; + display_max = hf_max; + } else { + display_val = lf_av; + display_max = lf_max; + } + } + for (i=0; i= ((display_max/LIGHT_LEN)*i) && display_val <= ((display_max/LIGHT_LEN)*(i+1))) { + if (LIGHT_SCHEME[i] & 0x1) LED_C_ON(); else LED_C_OFF(); + if (LIGHT_SCHEME[i] & 0x2) LED_A_ON(); else LED_A_OFF(); + if (LIGHT_SCHEME[i] & 0x4) LED_B_ON(); else LED_B_OFF(); + if (LIGHT_SCHEME[i] & 0x8) LED_D_ON(); else LED_D_OFF(); break; } } } } - DbpString("simulate tag (now type bitsamples)"); } void UsbPacketReceived(BYTE *packet, int len) @@ -756,11 +595,11 @@ void UsbPacketReceived(BYTE *packet, int len) break; case CMD_HID_DEMOD_FSK: - CmdHIDdemodFSK(); // Demodulate HID tag + CmdHIDdemodFSK(0, 0, 0, 1); // Demodulate HID tag break; case CMD_HID_SIM_TAG: - CmdHIDsimTAG(c->ext1, c->ext2); // Simulate HID tag by ID + CmdHIDsimTAG(c->ext1, c->ext2, 1); // Simulate HID tag by ID break; case CMD_FPGA_MAJOR_MODE_OFF: // ## FPGA Control @@ -769,8 +608,15 @@ void UsbPacketReceived(BYTE *packet, int len) LED_D_OFF(); // LED D indicates field ON or OFF break; - case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: - case CMD_DOWNLOAD_RAW_BITS_TI_TYPE: { + case CMD_READ_TI_TYPE: + ReadTItag(); + break; + + case CMD_WRITE_TI_TYPE: + WriteTItag(c->ext1,c->ext2,c->ext3); + break; + + case CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K: { UsbCommand n; if(c->cmd == CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K) { n.cmd = CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K; @@ -789,27 +635,30 @@ void UsbPacketReceived(BYTE *packet, int len) } case CMD_SIMULATE_TAG_125K: LED_A_ON(); - SimulateTagLowFrequency(c->ext1); + SimulateTagLowFrequency(c->ext1, 1); LED_A_OFF(); break; -#ifdef WITH_LCD - case CMD_LCD_RESET: - LCDReset(); - break; -#endif - case CMD_SWEEP_LF: - SweepLFrange(); + case CMD_READ_MEM: + ReadMem(c->ext1); break; - case CMD_SET_LF_DIVISOR: FpgaSendCommand(FPGA_CMD_SET_DIVISOR, c->ext1); break; + case CMD_VERSION: + SendVersion(); + break; + case CMD_LF_SIMULATE_BIDIR: + SimulateTagLowFrequencyBidir(c->ext1, c->ext2); + break; #ifdef WITH_LCD + case CMD_LCD_RESET: + LCDReset(); + break; case CMD_LCD: LCDSend(c->ext1); break; #endif - case CMD_SETUP_WRITE: + case CMD_SETUP_WRITE: case CMD_FINISH_WRITE: case CMD_HARDWARE_RESET: USB_D_PLUS_PULLUP_OFF(); @@ -821,7 +670,6 @@ void UsbPacketReceived(BYTE *packet, int len) } break; - default: DbpString("unknown command"); break; @@ -833,10 +681,10 @@ void AppMain(void) memset(BigBuf,0,sizeof(BigBuf)); SpinDelay(100); - LED_D_OFF(); - LED_C_OFF(); - LED_B_OFF(); - LED_A_OFF(); + LED_D_OFF(); + LED_C_OFF(); + LED_B_OFF(); + LED_A_OFF(); UsbStart(); @@ -862,14 +710,14 @@ void AppMain(void) LCDInit(); // test text on different colored backgrounds - LCDString(" The quick brown fox ", &FONT6x8,1,1+8*0,WHITE ,BLACK ); - LCDString(" jumped over the ", &FONT6x8,1,1+8*1,BLACK ,WHITE ); - LCDString(" lazy dog. ", &FONT6x8,1,1+8*2,YELLOW ,RED ); - LCDString(" AaBbCcDdEeFfGgHhIiJj ", &FONT6x8,1,1+8*3,RED ,GREEN ); - LCDString(" KkLlMmNnOoPpQqRrSsTt ", &FONT6x8,1,1+8*4,MAGENTA,BLUE ); - LCDString("UuVvWwXxYyZz0123456789", &FONT6x8,1,1+8*5,BLUE ,YELLOW); - LCDString("`-=[]_;',./~!@#$%^&*()", &FONT6x8,1,1+8*6,BLACK ,CYAN ); - LCDString(" _+{}|:\\\"<>? ",&FONT6x8,1,1+8*7,BLUE ,MAGENTA); + LCDString(" The quick brown fox ", &FONT6x8,1,1+8*0,WHITE ,BLACK ); + LCDString(" jumped over the ", &FONT6x8,1,1+8*1,BLACK ,WHITE ); + LCDString(" lazy dog. ", &FONT6x8,1,1+8*2,YELLOW ,RED ); + LCDString(" AaBbCcDdEeFfGgHhIiJj ", &FONT6x8,1,1+8*3,RED ,GREEN ); + LCDString(" KkLlMmNnOoPpQqRrSsTt ", &FONT6x8,1,1+8*4,MAGENTA,BLUE ); + LCDString("UuVvWwXxYyZz0123456789", &FONT6x8,1,1+8*5,BLUE ,YELLOW); + LCDString("`-=[]_;',./~!@#$%^&*()", &FONT6x8,1,1+8*6,BLACK ,CYAN ); + LCDString(" _+{}|:\\\"<>? ",&FONT6x8,1,1+8*7,BLUE ,MAGENTA); // color bands LCDFill(0, 1+8* 8, 132, 8, BLACK); @@ -886,131 +734,8 @@ void AppMain(void) for(;;) { UsbPoll(FALSE); WDT_HIT(); - } -} - -void SpinDelayUs(int us) -{ - int ticks = (48*us) >> 10; - - // Borrow a PWM unit for my real-time clock - PWM_ENABLE = PWM_CHANNEL(0); - // 48 MHz / 1024 gives 46.875 kHz - PWM_CH_MODE(0) = PWM_CH_MODE_PRESCALER(10); - PWM_CH_DUTY_CYCLE(0) = 0; - PWM_CH_PERIOD(0) = 0xffff; - - WORD start = (WORD)PWM_CH_COUNTER(0); - for(;;) { - WORD now = (WORD)PWM_CH_COUNTER(0); - if(now == (WORD)(start + ticks)) { - return; - } - WDT_HIT(); + if (BUTTON_HELD(1000) > 0) + SamyRun(); } } - -void SpinDelay(int ms) -{ - int ticks = (48000*ms) >> 10; - - // Borrow a PWM unit for my real-time clock - PWM_ENABLE = PWM_CHANNEL(0); - // 48 MHz / 1024 gives 46.875 kHz - PWM_CH_MODE(0) = PWM_CH_MODE_PRESCALER(10); - PWM_CH_DUTY_CYCLE(0) = 0; - PWM_CH_PERIOD(0) = 0xffff; - - WORD start = (WORD)PWM_CH_COUNTER(0); - - for(;;) { - WORD now = (WORD)PWM_CH_COUNTER(0); - if(now == (WORD)(start + ticks)) { - return; - } - WDT_HIT(); - } -} - -// listen for external reader -void ListenReaderField(int limit) -{ - int lf_av, lf_av_new, lf_baseline= -1, lf_count= 0; - int hf_av, hf_av_new, hf_baseline= -1, hf_count= 0; - -#define LF_ONLY 1 -#define HF_ONLY 2 - - LED_A_OFF(); - LED_B_OFF(); - LED_C_OFF(); - LED_D_OFF(); - - lf_av= ReadAdc(ADC_CHAN_LF); - - if(limit != HF_ONLY && lf_baseline == -1) - { - DbpString("LF 125/134 Baseline:"); - DbpIntegers(lf_av,0,0); - lf_baseline= lf_av; - } - - hf_av= ReadAdc(ADC_CHAN_HF); - - - if (limit != LF_ONLY && hf_baseline == -1) - { - DbpString("HF 13.56 Baseline:"); - DbpIntegers(hf_av,0,0); - hf_baseline= hf_av; - } - - for(;;) - { - if(BUTTON_PRESS()) - { - LED_B_OFF(); - LED_D_OFF(); - return; - } - WDT_HIT(); - - - if (limit != HF_ONLY) - { - if (abs(lf_av - lf_baseline) > 10) - LED_D_ON(); - else - LED_D_OFF(); - ++lf_count; - lf_av_new= ReadAdc(ADC_CHAN_LF); - // see if there's a significant change - if(abs(lf_av - lf_av_new) > 10) - { - DbpString("LF 125/134 Field Change:"); - DbpIntegers(lf_av,lf_av_new,lf_count); - lf_av= lf_av_new; - lf_count= 0; - } - } - - if (limit != LF_ONLY) - { - if (abs(hf_av - hf_baseline) > 10) - LED_B_ON(); - else - LED_B_OFF(); - ++hf_count; - hf_av_new= ReadAdc(ADC_CHAN_HF); - // see if there's a significant change - if(abs(hf_av - hf_av_new) > 10) - { - DbpString("HF 13.56 Field Change:"); - DbpIntegers(hf_av,hf_av_new,hf_count); - hf_av= hf_av_new; - hf_count= 0; - } - } - } -}