X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/43591e6464af07466ffd87fcb970527ba748253a..fd6675219387500f61bfdcde608e326d30ff904b:/armsrc/i2c.c?ds=inline

diff --git a/armsrc/i2c.c b/armsrc/i2c.c
index 721b4b2e..3d16b42c 100644
--- a/armsrc/i2c.c
+++ b/armsrc/i2c.c
@@ -8,11 +8,23 @@
 //-----------------------------------------------------------------------------
 // The main i2c code, for communications with smart card module
 //-----------------------------------------------------------------------------
+
 #include "i2c.h"
-#include "mifareutil.h" //for mf_dbglevel
+
+#include <stdint.h>
+#include <stdbool.h>
 #include "string.h"  //for memset memcmp
+#include "proxmark3.h"
+#include "mifareutil.h" // for MF_DBGLEVEL
+#include "BigBuf.h"
+#include "apps.h"
+#include "usb_cdc.h"
+
+#ifdef WITH_SMARTCARD
+#include "smartcard.h"
+#endif
+
 
-//	¶¨ÒåÁ¬½ÓÒý½Å
 #define GPIO_RST  AT91C_PIO_PA1
 #define GPIO_SCL  AT91C_PIO_PA5
 #define GPIO_SDA  AT91C_PIO_PA7
@@ -27,49 +39,75 @@
 
 #define I2C_ERROR  "I2C_WaitAck Error" 
 
-volatile unsigned long c;
+static volatile unsigned long c;
 
 //	Ö±½ÓʹÓÃÑ­»·À´ÑÓʱ£¬Ò»¸öÑ­»· 6 ÌõÖ¸Á48M£¬ Delay=1 ´ó¸ÅΪ 200kbps
 // timer.
 // I2CSpinDelayClk(4) = 12.31us
 // I2CSpinDelayClk(1) = 3.07us
-void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) {
+static void __attribute__((optimize("O0"))) I2CSpinDelayClk(uint16_t delay) {
 	for (c = delay * 2; c; c--) {};
 }
 
-//	ͨѶÑÓ³Ùº¯Êý     communication delay function	
+// communication delay functions
 #define I2C_DELAY_1CLK    I2CSpinDelayClk(1)
 #define I2C_DELAY_2CLK    I2CSpinDelayClk(2)
 #define I2C_DELAY_XCLK(x) I2CSpinDelayClk((x))
 
-
 #define  ISO7618_MAX_FRAME 255
 
-void I2C_init(void) {
-	// ÅäÖø´Î»Òý½Å£¬¹Ø±ÕÉÏÀ­£¬ÍÆÍìÊä³ö£¬Ä¬Èϸß
-	// Configure reset pin, close up pull up, push-pull output, default high
-	AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST;
-	AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST;
+// try i2c bus recovery at 100kHz = 5uS high, 5uS low
+static void I2C_recovery(void) {
+
+	DbpString("Performing i2c bus recovery");	
+			
+	// reset I2C
+	SDA_H; SCL_H;
+	
+	 //9nth cycle acts as NACK
+	for (int i = 0; i < 10; i++)  {
+		SCL_H; WaitUS(5);
+		SCL_L; WaitUS(5);
+	}
+	
+    //a STOP signal (SDA from low to high while CLK is high)	
+	SDA_L; WaitUS(5);
+	SCL_H; WaitUS(2);
+	SDA_H; WaitUS(2);
+	
+	bool isok = (SCL_read && SDA_read); 
+    if (!SDA_read)
+		DbpString("I2C bus recovery  error: SDA still LOW");
+	if (!SCL_read)
+		DbpString("I2C bus recovery  error: SCL still LOW");
+	if (isok)
+		DbpString("I2C bus recovery complete");
+}
+
+static void I2C_init(void) {
+	// Configure reset pin
+	AT91C_BASE_PIOA->PIO_PPUDR = GPIO_RST;  // disable pull up resistor
+	AT91C_BASE_PIOA->PIO_MDDR = GPIO_RST;   // push-pull output (multidriver disabled)
 
-	// ÅäÖà I2C Òý½Å£¬¿ªÆôÉÏÀ­£¬¿ªÂ©Êä³ö
-	// Configure I2C pin, open up, open leakage
-	AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA);  // ´ò¿ªÉÏÀ­  Open up the pull up
-	AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA);
+	// Configure SCL and SDA pins
+	AT91C_BASE_PIOA->PIO_PPUER |= (GPIO_SCL | GPIO_SDA);  // enable pull up resistor
+	AT91C_BASE_PIOA->PIO_MDER |= (GPIO_SCL | GPIO_SDA);   // open drain output (multidriver enabled) - requires external pull up resistor
 
-	// ĬÈÏÈý¸ùÏßÈ«²¿À­¸ß
-	// default three lines all pull up
+	// set all three outputs to high
 	AT91C_BASE_PIOA->PIO_SODR |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
 
-	// ÔÊÐíÊä³ö
-	// allow output
+	// configure all three pins as output, controlled by PIOA
 	AT91C_BASE_PIOA->PIO_OER |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
 	AT91C_BASE_PIOA->PIO_PER |= (GPIO_SCL | GPIO_SDA | GPIO_RST);
-}
 
+	bool isok =  (SCL_read && SDA_read); 
+	if ( !isok )
+		I2C_recovery();
+	
+}
 
-// ÉèÖø´Î»×´Ì¬
 // set the reset state
-void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) {
+static void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) {
 	if (LineRST)
 		HIGH(GPIO_RST);
 	else
@@ -86,31 +124,21 @@ void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA) {
 		LOW(GPIO_SDA);
 }
 
-// ¸´Î»½øÈëÖ÷³ÌÐò
 // Reset the SIM_Adapter, then  enter the main program
 // Note: the SIM_Adapter will not enter the main program after power up. Please run this function before use SIM_Adapter.
-void I2C_Reset_EnterMainProgram(void) {
-	I2C_SetResetStatus(0, 0, 0);    // À­µÍ¸´Î»Ïß
-	SpinDelay(30);
-	I2C_SetResetStatus(1, 0, 0);    // ½â³ý¸´Î»
-	SpinDelay(30);
-	I2C_SetResetStatus(1, 1, 1);    // À­¸ßÊý¾ÝÏß
-	SpinDelay(10);
-}
-
-// ¸´Î»½øÈëÒýµ¼Ä£Ê½
-// Reset the SIM_Adapter, then enter the bootloader program
-// Reserve£ºFor firmware update.
-void I2C_Reset_EnterBootloader(void) {
-	I2C_SetResetStatus(0, 1, 1);    // À­µÍ¸´Î»Ïß
-	SpinDelay(100);
-	I2C_SetResetStatus(1, 1, 1);    // ½â³ý¸´Î»
-	SpinDelay(10);
+static void I2C_Reset_EnterMainProgram(void) {
+	StartTicks();
+	I2C_init();
+	I2C_SetResetStatus(0, 0, 0);
+	WaitMS(30);
+	I2C_SetResetStatus(1, 0, 0);
+	WaitMS(30);
+	I2C_SetResetStatus(1, 1, 1);
+	WaitMS(10);
 }
 
-//	µÈ´ýʱÖÓ±ä¸ß	
 // Wait for the clock to go High.	
-bool WaitSCL_H_delay(uint32_t delay) {
+static bool WaitSCL_H_delay(uint32_t delay) {
 	while (delay--) {
 		if (SCL_read) {
 			return true;
@@ -120,26 +148,26 @@ bool WaitSCL_H_delay(uint32_t delay) {
 	return false;
 }
 
-// 5000 * 3.07us = 15350us. 15.35ms
-bool WaitSCL_H(void) {
-	return WaitSCL_H_delay(5000);
+// 15000 * 3.07us = 46050us. 46.05ms
+static bool WaitSCL_H(void) {
+	return WaitSCL_H_delay(15000);
 }
 
-// Wait max 300ms or until SCL goes LOW.
-// Which ever comes first
-bool WaitSCL_L_300ms(void) {
-	volatile uint16_t delay = 300;
-	while ( delay-- ) {
-		// exit on SCL LOW
-		if (!SCL_read)
+bool WaitSCL_L_delay(uint32_t delay) {
+	while (delay--)	{
+		if (!SCL_read) {
 			return true;
-
-		SpinDelay(1);
+		}
+		I2C_DELAY_1CLK;		
 	}
-	return (delay == 0);
+	return false;	
 }
 
-bool I2C_Start(void) {
+bool WaitSCL_L(void) {
+	return WaitSCL_L_delay(15000);
+}
+
+static bool I2C_Start(void) {
 
 	I2C_DELAY_XCLK(4);
 	SDA_H; I2C_DELAY_1CLK;
@@ -155,22 +183,8 @@ bool I2C_Start(void) {
 	return true;
 }
 
-bool I2C_WaitForSim() {
-	// variable delay here.
-	if (!WaitSCL_L_300ms())
-		return false;
-
-	// 8051 speaks with smart card.
-	// 1000*50*3.07 = 153.5ms
-	// 1byte transfer == 1ms
-	if (!WaitSCL_H_delay(2000*50) )
-		return false;
-
-	return true;
-}
-
 // send i2c STOP
-void I2C_Stop(void) {
+static void I2C_Stop(void) {
 	SCL_L; I2C_DELAY_2CLK;
 	SDA_L; I2C_DELAY_2CLK;
 	SCL_H; I2C_DELAY_2CLK;
@@ -179,29 +193,14 @@ void I2C_Stop(void) {
 	I2C_DELAY_XCLK(8);
 }
 
-// Send i2c ACK
-void I2C_Ack(void) {
-	SCL_L; I2C_DELAY_2CLK;
-	SDA_L; I2C_DELAY_2CLK;
-	SCL_H; I2C_DELAY_2CLK;
-	SCL_L; I2C_DELAY_2CLK;
-}
-
-// Send i2c NACK
-void I2C_NoAck(void) {
-	SCL_L; I2C_DELAY_2CLK;
-	SDA_H; I2C_DELAY_2CLK;
-	SCL_H; I2C_DELAY_2CLK;
-	SCL_L; I2C_DELAY_2CLK;
-}
-
-bool I2C_WaitAck(void) {
+static bool I2C_WaitAck(void) {
 	SCL_L; I2C_DELAY_1CLK;
 	SDA_H; I2C_DELAY_1CLK;
 	SCL_H;
 	if (!WaitSCL_H())
 		return false;
 
+	I2C_DELAY_2CLK;
 	I2C_DELAY_2CLK;
 	if (SDA_read) {
 		SCL_L;
@@ -211,11 +210,12 @@ bool I2C_WaitAck(void) {
 	return true;
 }
 
-void I2C_SendByte(uint8_t data) {
-	uint8_t i = 8;
+static void I2C_SendByte(uint8_t data) {
+	uint8_t bits = 8;
 
-	while (i--) {
-		SCL_L; I2C_DELAY_1CLK;
+	while (bits--) {
+		SCL_L; 
+		I2C_DELAY_1CLK;
 
 		if (data & 0x80)
 			SDA_H;
@@ -223,6 +223,7 @@ void I2C_SendByte(uint8_t data) {
 			SDA_L;
 
 		data <<= 1;
+
 		I2C_DELAY_1CLK;
 
 		SCL_H;
@@ -234,18 +235,91 @@ void I2C_SendByte(uint8_t data) {
 	SCL_L;
 }
 
-uint8_t I2C_ReadByte(void) {
-	uint8_t i = 8, b = 0;
+bool I2C_is_available(void) {
+	I2C_Reset_EnterMainProgram();
+	if (!I2C_Start())  // some other device is active on the bus
+		return true;
+	I2C_SendByte(I2C_DEVICE_ADDRESS_MAIN & 0xFE);
+	if (!I2C_WaitAck()) {  // no response from smartcard reader
+		I2C_Stop();
+		return false;
+	}
+	I2C_Stop();
+	return true;
+}
+
+#ifdef WITH_SMARTCARD
+// Reset the SIM_Adapter, then enter the bootloader program
+// Reserve£ºFor firmware update.
+static void I2C_Reset_EnterBootloader(void) {
+	I2C_SetResetStatus(0, 1, 1);
+	WaitMS(100);
+	I2C_SetResetStatus(1, 1, 1);
+	WaitMS(10);
+}
+
+// Wait max 1800ms or until SCL goes LOW.
+// It timeout reading response from card
+// Which ever comes first
+bool WaitSCL_L_timeout(void){
+	volatile uint16_t delay = 1800;
+	while ( delay-- ) {
+		// exit on SCL LOW
+		if (!SCL_read)
+			return true;
+
+		WaitMS(1);
+	}
+	return (delay == 0);
+}
+
+static bool I2C_WaitForSim() {
+	// wait for data from card
+	if (!WaitSCL_L_timeout())
+		return false;
+
+	// 8051 speaks with smart card.
+	// 1000*50*3.07 = 153.5ms
+	// 1byte transfer == 1ms with max frame being 256bytes
+	if (!WaitSCL_H_delay(10 * 1000 * 50))
+		return false;
+
+	return true;
+}
+
+// Send i2c ACK
+static void I2C_Ack(void) {
+	SCL_L; I2C_DELAY_2CLK;
+	SDA_L; I2C_DELAY_2CLK;
+	SCL_H; I2C_DELAY_2CLK;
+	if (!WaitSCL_H()) return;
+	SCL_L; I2C_DELAY_2CLK;
+}
+
+// Send i2c NACK
+static void I2C_NoAck(void) {
+	SCL_L; I2C_DELAY_2CLK;
+	SDA_H; I2C_DELAY_2CLK;
+	SCL_H; I2C_DELAY_2CLK;
+	if (!WaitSCL_H()) return;
+	SCL_L; I2C_DELAY_2CLK;
+}
+
+static int16_t I2C_ReadByte(void) {
+	uint8_t bits = 8, b = 0;
 
 	SDA_H;
-	while (i--) {
+	while (bits--) {
 		b <<= 1;
-		SCL_L; I2C_DELAY_2CLK;
+		SCL_L; 
+		if (!WaitSCL_L()) return -2;
+		
+		I2C_DELAY_1CLK;
+
 		SCL_H;
-		if (!WaitSCL_H())
-			return 0;
+		if (!WaitSCL_H()) return -1;
 
-		I2C_DELAY_2CLK;
+		I2C_DELAY_1CLK;
 		if (SDA_read)
 			b |= 0x01;
 	}
@@ -254,12 +328,12 @@ uint8_t I2C_ReadByte(void) {
 }
 
 // Sends one byte  ( command to be written, SlaveDevice address)
-bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) {
+static bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) {
 	bool bBreak = true;
 	do {
 		if (!I2C_Start())
 			return false;
-		//[C0]
+		
 		I2C_SendByte(device_address & 0xFE);
 		if (!I2C_WaitAck())
 			break;
@@ -279,9 +353,8 @@ bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address) {
 	return true;
 }
 
-// дÈë1×Ö½ÚÊý¾Ý £¨´ýдÈëÊý¾Ý£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£©
 // Sends 1 byte data (Data to be written, command to be written , SlaveDevice address  ).
-bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) {
+static bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) {
 	bool bBreak = true;
 	do {
 		if (!I2C_Start())
@@ -310,10 +383,9 @@ bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address) {
 	return true;
 }
 
-//	дÈë1´®Êý¾Ý£¨´ýдÈëÊý×éµØÖ·£¬´ýдÈ볤¶È£¬´ýдÈëµØÖ·£¬Æ÷¼þÀàÐÍ£©	
 //Sends a string of data (Array, length, command to be written , SlaveDevice address  ).
 // len = uint8 (max buffer to write 256bytes)
-bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
+static bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
 	bool bBreak = true;
 	do {
 		if (!I2C_Start())
@@ -349,19 +421,18 @@ bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t dev
 	return true;
 }
 
-// ¶Á³ö1´®Êý¾Ý£¨´æ·Å¶Á³öÊý¾Ý£¬´ý¶Á³ö³¤¶È£¬´ø¶Á³öµØÖ·£¬Æ÷¼þÀàÐÍ£©
 // read 1 strings of data (Data array, Readout length, command to be written , SlaveDevice address  ).
 // len = uint8 (max buffer to read 256bytes)
-uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
+static int16_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address) {
 
 	if ( !data || len == 0 )
 		return 0;
 
 	// extra wait  500us (514us measured)
 	// 200us  (xx measured)
-	SpinDelayUs(200);
+	WaitUS(600);
 	bool bBreak = true;
-	uint8_t	readcount = 0;
+	uint16_t readcount = 0;
 
 	do {
 		if (!I2C_Start())
@@ -391,11 +462,14 @@ uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t d
 		return 0;
 	}
 
-	// reading
 	while (len) {
 
-		*data = I2C_ReadByte();
-
+		int16_t tmp = I2C_ReadByte();
+		if ( tmp < 0 )
+			return tmp;
+		
+		*data = (uint8_t)tmp & 0xFF;
+		
 		len--;
 
 		// ¶ÁÈ¡µÄµÚÒ»¸ö×Ö½ÚΪºóÐø³¤¶È	
@@ -415,11 +489,12 @@ uint8_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t d
 	}
 
 	I2C_Stop();
+	
 	// return bytecount - first byte (which is length byte)
-	return (readcount) ? --readcount : 0;
+	return --readcount;
 }
 
-uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
+static int16_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
 	//START, 0xB0, 0x00, 0x00, START, 0xB1, xx, yy, zz, ......, STOP	
 	bool bBreak = true;
 	uint8_t	readcount = 0;
@@ -434,12 +509,10 @@ uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t
 		if (!I2C_WaitAck())
 			break;
 
-		// msb
 		I2C_SendByte(msb);
 		if (!I2C_WaitAck())
 			break;
 
-		// lsb
 		I2C_SendByte(lsb);
 		if (!I2C_WaitAck())
 			break;
@@ -461,8 +534,13 @@ uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t
 
 	// reading
 	while (len) {
-		*data = I2C_ReadByte();
-
+		
+		int16_t tmp = I2C_ReadByte();
+		if ( tmp < 0 )
+			return tmp;
+		
+		*data = (uint8_t)tmp & 0xFF;
+		
 		data++;
 		readcount++;
 		len--;
@@ -478,7 +556,7 @@ uint8_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t
 	return readcount;
 }
 
-bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
+static bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address) {
 	//START, 0xB0, 0x00, 0x00, xx, yy, zz, ......, STOP	
 	bool bBreak = true;
 
@@ -491,12 +569,10 @@ bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t d
 		if (!I2C_WaitAck())
 			break;
 
-		// msb
 		I2C_SendByte(msb);
 		if (!I2C_WaitAck())
 			break;
 
-		// lsb
 		I2C_SendByte(lsb);
 		if (!I2C_WaitAck())
 			break;
@@ -525,7 +601,6 @@ bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t d
 void I2C_print_status(void) {
 	DbpString("Smart card module (ISO 7816)");
 	uint8_t resp[] = {0,0,0,0};
-	I2C_init();
 	I2C_Reset_EnterMainProgram();
 	uint8_t len = I2C_BufferRead(resp, sizeof(resp), I2C_DEVICE_CMD_GETVERSION, I2C_DEVICE_ADDRESS_MAIN);
 	if ( len > 0 )
@@ -534,47 +609,57 @@ void I2C_print_status(void) {
 		DbpString("  version.................FAILED");
 }
 
-bool GetATR(smart_card_atr_t *card_ptr) {
+// Will read response from smart card module,  retries 3 times to get the data.
+static bool sc_rx_bytes(uint8_t* dest, uint8_t *destlen) {
+ 	uint8_t i = 3;
+	int16_t len = 0;
+	while (i--) {
+		
+		I2C_WaitForSim();
+	
+		len = I2C_BufferRead(dest, *destlen, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
+		
+		if ( len > 1 ){
+			break;
+		} else if ( len == 1 ) {
+			continue;
+		} else if ( len <= 0 ) {
+			return false;	
+		} 
+	}
+ 	// after three
+	if ( len <= 1 )
+		return false;
+	
+	*destlen = (uint8_t)len & 0xFF;
+	return true;
+}
+
+static bool GetATR(smart_card_atr_t *card_ptr) {
 
-	// clear 
-	if ( card_ptr ) {
-		card_ptr->atr_len = 0;
-		memset(card_ptr->atr, 0, sizeof(card_ptr->atr));
+	if ( !card_ptr ) {
+		return false;
 	}
 
+	card_ptr->atr_len = 0;
+	memset(card_ptr->atr, 0, sizeof(card_ptr->atr));
+
 	// Send ATR
 	// start [C0 01] stop start C1 len aa bb cc stop]
 	I2C_WriteCmd(I2C_DEVICE_CMD_GENERATE_ATR, I2C_DEVICE_ADDRESS_MAIN);
-	uint8_t	cmd[1] = {1};
-	LogTrace(cmd, 1, 0, 0, NULL, true);
 
-	//wait for sim card to answer.
+	// wait for sim card to answer.
+	// 1byte = 1ms, max frame 256bytes. Should wait 256ms at least just in case.
 	if (!I2C_WaitForSim()) 
 		return false;
 
-	// read answer
-	uint8_t len = I2C_BufferRead(card_ptr->atr, sizeof(card_ptr->atr), I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
-
-	if ( len == 0 )
+	// read bytes from module
+	uint8_t len = sizeof(card_ptr->atr);
+	if ( !sc_rx_bytes(card_ptr->atr, &len) )		
 		return false;
 
-	// for some reason we only get first byte of atr, if that is so, send dummy command to retrieve the rest of the atr 
-	if (len == 1) {
-
-		uint8_t data[1] = {0};
-		I2C_BufferWrite(data, len, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN);
-
-		if ( !I2C_WaitForSim() )
-			return false;
-
-		uint8_t len2 = I2C_BufferRead(card_ptr->atr + len, sizeof(card_ptr->atr) - len, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
-		len = len + len2;
-	}
-
-	if ( card_ptr ) {
-		card_ptr->atr_len = len;
-		LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false);
-	}
+	card_ptr->atr_len = len;
+	LogTrace(card_ptr->atr, card_ptr->atr_len, 0, 0, NULL, false);
 
 	return true;
 }
@@ -584,7 +669,6 @@ void SmartCardAtr(void) {
 	LED_D_ON();
 	clear_trace();
 	set_tracing(true);
-	I2C_init();
 	I2C_Reset_EnterMainProgram();
 	bool isOK = GetATR( &card );
 	cmd_send(CMD_ACK, isOK, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t));
@@ -607,10 +691,9 @@ void SmartCardRaw( uint64_t arg0, uint64_t arg1, uint8_t *data ) {
 
 	if ((flags & SC_CONNECT)) {	
 
-		I2C_init();
 		I2C_Reset_EnterMainProgram();
 
-		if ( !(flags & SC_NO_SELECT) ) {
+		if ((flags & SC_SELECT)) {
 			smart_card_atr_t card;
 			bool gotATR = GetATR( &card );
 			//cmd_send(CMD_ACK, gotATR, sizeof(smart_card_atr_t), 0, &card, sizeof(smart_card_atr_t));
@@ -619,23 +702,28 @@ void SmartCardRaw( uint64_t arg0, uint64_t arg1, uint8_t *data ) {
 		}
 	}
 
-	if ((flags & SC_RAW)) {
+	if ((flags & SC_RAW) || (flags & SC_RAW_T0)) {
 
 		LogTrace(data, arg1, 0, 0, NULL, true);
 
 		// Send raw bytes
 		// asBytes = A0 A4 00 00 02
 		// arg1 = len 5
-		I2C_BufferWrite(data, arg1, I2C_DEVICE_CMD_SEND, I2C_DEVICE_ADDRESS_MAIN);
-
-		if ( !I2C_WaitForSim() )
-			goto OUT;
-
-		len = I2C_BufferRead(resp, ISO7618_MAX_FRAME, I2C_DEVICE_CMD_READ, I2C_DEVICE_ADDRESS_MAIN);
-		LogTrace(resp, len, 0, 0, NULL, false);
+		bool res = I2C_BufferWrite(data, arg1, ((flags & SC_RAW_T0) ? I2C_DEVICE_CMD_SEND_T0 : I2C_DEVICE_CMD_SEND), I2C_DEVICE_ADDRESS_MAIN);
+		if ( !res && MF_DBGLEVEL > 3 ) DbpString(I2C_ERROR);
+
+		// read bytes from module
+		len = ISO7618_MAX_FRAME;
+		res = sc_rx_bytes(resp, &len);
+		if ( res ) {
+			LogTrace(resp, len, 0, 0, NULL, false);
+		} else {
+			len = 0;
+		}
 	}
 OUT:
 	cmd_send(CMD_ACK, len, 0, 0, resp, len);
+	BigBuf_free();
 	set_tracing(false);
 	LEDsoff();
 }
@@ -648,11 +736,10 @@ void SmartCardUpgrade(uint64_t arg0) {
 	// write.   Sector0,  with 11,22,33,44
 	// erase is 128bytes, and takes 50ms to execute
 
-	I2C_init();
 	I2C_Reset_EnterBootloader();
 
 	bool isOK = true;
-	uint8_t res = 0;
+	int16_t res = 0;
 	uint16_t length = arg0;
 	uint16_t pos = 0;
 	uint8_t *fwdata = BigBuf_get_addr();
@@ -676,11 +763,11 @@ void SmartCardUpgrade(uint64_t arg0) {
 		}
 
 		// writing takes time.
-		SpinDelay(50);
+		WaitMS(50);
 
 		// read
 		res = I2C_ReadFW(verfiydata, size, msb, lsb, I2C_DEVICE_ADDRESS_BOOT);
-		if ( res == 0) {
+		if ( res <= 0) {
 			DbpString("Reading back failed");
 			isOK = false;
 			break;
@@ -698,6 +785,7 @@ void SmartCardUpgrade(uint64_t arg0) {
 	}
 	cmd_send(CMD_ACK, isOK, pos, 0, 0, 0);
 	LED_C_OFF();
+	BigBuf_free();	
 }
 
 // unfinished (or not needed?)
@@ -707,7 +795,6 @@ void SmartCardUpgrade(uint64_t arg0) {
 void SmartCardSetClock(uint64_t arg0) {
 	LED_D_ON();
 	set_tracing(true);
-	I2C_init();
 	I2C_Reset_EnterMainProgram();
 
 	// Send SIM CLC
@@ -718,3 +805,5 @@ void SmartCardSetClock(uint64_t arg0) {
 	set_tracing(false);
 	LEDsoff();
 }
+
+#endif
\ No newline at end of file