X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/46c65fed6c1d0d1075a4a253145db44f7b916250..77533e21ae07c5156682dfd7139ceedd99b04c39:/armsrc/iso14443a.c
diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c
index b9fb9bae..84fbd661 100644
--- a/armsrc/iso14443a.c
+++ b/armsrc/iso14443a.c
@@ -561,7 +561,7 @@ static RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non
// triggering so that we start recording at the point that the tag is moved
// near the reader.
//-----------------------------------------------------------------------------
-void RAMFUNC SnoopIso14443a(uint8_t param) {
+void RAMFUNC SniffIso14443a(uint8_t param) {
// param:
// bit 0 - trigger from first card answer
// bit 1 - trigger from first reader 7-bit request
@@ -673,6 +673,7 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
}
/* And ready to receive another command. */
UartReset();
+ //UartInit(receivedCmd, receivedCmdPar);
/* And also reset the demod code, which might have been */
/* false-triggered by the commands from the reader. */
DemodReset();
@@ -935,8 +936,15 @@ bool prepare_allocated_tag_modulation(tag_response_info_t* response_info) {
// Main loop of simulated tag: receive commands from reader, decide what
// response to send, and send it.
//-----------------------------------------------------------------------------
-void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
+void SimulateIso14443aTag(int tagType, int flags, int uid_2nd, byte_t* data)
{
+
+ //Here, we collect UID,NT,AR,NR,UID2,NT2,AR2,NR2
+ // This can be used in a reader-only attack.
+ // (it can also be retrieved via 'hf 14a list', but hey...
+ uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0};
+ uint8_t ar_nr_collected = 0;
+
uint8_t sak;
// The first response contains the ATQA (note: bytes are transmitted in reverse order).
@@ -972,7 +980,13 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
response1[0] = 0x01;
response1[1] = 0x0f;
sak = 0x01;
- } break;
+ } break;
+ case 6: { // MIFARE Mini
+ // Says: I am a Mifare Mini, 320b
+ response1[0] = 0x44;
+ response1[1] = 0x00;
+ sak = 0x09;
+ } break;
default: {
Dbprintf("Error: unkown tagtype (%d)",tagType);
return;
@@ -985,17 +999,24 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
// Check if the uid uses the (optional) part
uint8_t response2a[5] = {0x00};
- if (uid_2nd) {
+ if (flags & FLAG_7B_UID_IN_DATA) {
response2[0] = 0x88;
- num_to_bytes(uid_1st,3,response2+1);
- num_to_bytes(uid_2nd,4,response2a);
+ response2[1] = data[0];
+ response2[2] = data[1];
+ response2[3] = data[2];
+
+ response2a[0] = data[3];
+ response2a[1] = data[4];
+ response2a[2] = data[5];
+ response2a[3] = data[6]; //??
response2a[4] = response2a[0] ^ response2a[1] ^ response2a[2] ^ response2a[3];
// Configure the ATQA and SAK accordingly
response1[0] |= 0x40;
sak |= 0x04;
} else {
- num_to_bytes(uid_1st,4,response2);
+ memcpy(response2, data, 4);
+ //num_to_bytes(uid_1st,4,response2);
// Configure the ATQA and SAK accordingly
response1[0] &= 0xBF;
sak &= 0xFB;
@@ -1014,7 +1035,7 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
response3a[0] = sak & 0xFB;
ComputeCrc14443(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
- uint8_t response5[] = { 0x00, 0x00, 0x00, 0x00 }; // Very random tag nonce
+ uint8_t response5[] = { 0x01, 0x01, 0x01, 0x01 }; // Very random tag nonce
uint8_t response6[] = { 0x04, 0x58, 0x80, 0x02, 0x00, 0x00 }; // dummy ATS (pseudo-ATR), answer to RATS:
// Format byte = 0x58: FSCI=0x08 (FSC=256), TA(1) and TC(1) present,
// TA(1) = 0x80: different divisors not supported, DR = 1, DS = 1
@@ -1129,9 +1150,45 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
if (tracing) {
LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
}
+ uint32_t nonce = bytes_to_num(response5,4);
uint32_t nr = bytes_to_num(receivedCmd,4);
uint32_t ar = bytes_to_num(receivedCmd+4,4);
- Dbprintf("Auth attempt {nr}{ar}: %08x %08x",nr,ar);
+ //Dbprintf("Auth attempt {nonce}{nr}{ar}: %08x %08x %08x", nonce, nr, ar);
+
+ if(flags & FLAG_NR_AR_ATTACK )
+ {
+ if(ar_nr_collected < 2){
+ // Avoid duplicates... probably not necessary, nr should vary.
+ //if(ar_nr_responses[3] != nr){
+ ar_nr_responses[ar_nr_collected*5] = 0;
+ ar_nr_responses[ar_nr_collected*5+1] = 0;
+ ar_nr_responses[ar_nr_collected*5+2] = nonce;
+ ar_nr_responses[ar_nr_collected*5+3] = nr;
+ ar_nr_responses[ar_nr_collected*5+4] = ar;
+ ar_nr_collected++;
+ //}
+ }
+
+ if(ar_nr_collected > 1 ) {
+
+ if (MF_DBGLEVEL >= 2) {
+ Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:");
+ Dbprintf("../tools/mfkey/mfkey32 %07x%08x %08x %08x %08x %08x %08x",
+ ar_nr_responses[0], // UID1
+ ar_nr_responses[1], // UID2
+ ar_nr_responses[2], // NT
+ ar_nr_responses[3], // AR1
+ ar_nr_responses[4], // NR1
+ ar_nr_responses[8], // AR2
+ ar_nr_responses[9] // NR2
+ );
+ }
+ uint8_t len = ar_nr_collected*5*4;
+ cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,len,0,&ar_nr_responses,len);
+ ar_nr_collected = 0;
+ memset(ar_nr_responses, 0x00, len);
+ }
+ }
} else {
// Check for ISO 14443A-4 compliant commands, look at left nibble
switch (receivedCmd[0]) {
@@ -1235,6 +1292,8 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
}
}
+ FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+
Dbprintf("%x %x %x", happened, happened2, cmdsRecvd);
LED_A_OFF();
BigBuf_free_keep_EM();
@@ -1958,7 +2017,7 @@ void ReaderIso14443a(UsbCommand *c)
if(param & ISO14A_TOPAZMODE) {
AppendCrc14443b(cmd,len);
} else {
- AppendCrc14443a(cmd,len);
+ AppendCrc14443a(cmd,len);
}
len += 2;
if (lenbits) lenbits += 16;
@@ -2010,13 +2069,11 @@ void ReaderIso14443a(UsbCommand *c)
// Therefore try in alternating directions.
int32_t dist_nt(uint32_t nt1, uint32_t nt2) {
- uint16_t i;
- uint32_t nttmp1, nttmp2;
-
if (nt1 == nt2) return 0;
- nttmp1 = nt1;
- nttmp2 = nt2;
+ uint16_t i;
+ uint32_t nttmp1 = nt1;
+ uint32_t nttmp2 = nt2;
for (i = 1; i < 32768; i++) {
nttmp1 = prng_successor(nttmp1, 1);
@@ -2035,28 +2092,27 @@ int32_t dist_nt(uint32_t nt1, uint32_t nt2) {
// Cloning MiFare Classic Rail and Building Passes, Anywhere, Anytime"
// (article by Nicolas T. Courtois, 2009)
//-----------------------------------------------------------------------------
-void ReaderMifare(bool first_try)
-{
- // Mifare AUTH
- uint8_t mf_auth[] = { 0x60,0x00,0xf5,0x7b };
- uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 };
- static uint8_t mf_nr_ar3;
-
- uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];
- uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];
-
+void ReaderMifare(bool first_try) {
// free eventually allocated BigBuf memory. We want all for tracing.
BigBuf_free();
clear_trace();
set_tracing(TRUE);
+ // Mifare AUTH
+ uint8_t mf_auth[] = { 0x60,0x00,0xf5,0x7b };
+ uint8_t mf_nr_ar[8] = { 0x00 }; //{ 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01 };
+ static uint8_t mf_nr_ar3 = 0;
+
+ uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = { 0x00 };
+ uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = { 0x00 };
+
byte_t nt_diff = 0;
uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough
static byte_t par_low = 0;
bool led_on = TRUE;
- uint8_t uid[10] ={0};
- uint32_t cuid;
+ uint8_t uid[10] = {0x00};
+ //uint32_t cuid = 0x00;
uint32_t nt = 0;
uint32_t previous_nt = 0;
@@ -2064,13 +2120,15 @@ void ReaderMifare(bool first_try)
byte_t par_list[8] = {0x00};
byte_t ks_list[8] = {0x00};
- static uint32_t sync_time;
- static uint32_t sync_cycles;
+ static uint32_t sync_time = 0;
+ static uint32_t sync_cycles = 0;
int catch_up_cycles = 0;
int last_catch_up = 0;
uint16_t consecutive_resyncs = 0;
int isOK = 0;
+ int numWrongDistance = 0;
+
if (first_try) {
mf_nr_ar3 = 0;
iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
@@ -2090,20 +2148,22 @@ void ReaderMifare(bool first_try)
LED_A_ON();
LED_B_OFF();
LED_C_OFF();
-
+ LED_C_ON();
for(uint16_t i = 0; TRUE; i++) {
WDT_HIT();
// Test if the action was cancelled
- if(BUTTON_PRESS()) {
+ if(BUTTON_PRESS()) break;
+
+ if (numWrongDistance > 1000) {
+ isOK = 0;
break;
}
- LED_C_ON();
-
- if(!iso14443a_select_card(uid, NULL, &cuid)) {
+ //if(!iso14443a_select_card(uid, NULL, &cuid)) {
+ if(!iso14443a_select_card(uid, NULL, NULL)) {
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card");
continue;
}
@@ -2137,9 +2197,14 @@ void ReaderMifare(bool first_try)
nt_attacked = nt;
}
else {
- if (nt_distance == -99999) { // invalid nonce received, try again
+
+ // invalid nonce received, try again
+ if (nt_distance == -99999) {
+ numWrongDistance++;
+ if (MF_DBGLEVEL >= 3) Dbprintf("The two nonces has invalid distance, tag could have good PRNG\n");
continue;
}
+
sync_cycles = (sync_cycles - nt_distance);
if (MF_DBGLEVEL >= 3) Dbprintf("calibrating in cycle %d. nt_distance=%d, Sync_cycles: %d\n", i, nt_distance, sync_cycles);
continue;
@@ -2148,7 +2213,7 @@ void ReaderMifare(bool first_try)
if ((nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again...
catch_up_cycles = -dist_nt(nt_attacked, nt);
- if (catch_up_cycles == 99999) { // invalid nonce received. Don't resync on that one.
+ if (catch_up_cycles >= 99999) { // invalid nonce received. Don't resync on that one.
catch_up_cycles = 0;
continue;
}
@@ -2206,10 +2271,10 @@ void ReaderMifare(bool first_try)
}
}
-
mf_nr_ar[3] &= 0x1F;
- byte_t buf[28];
+ byte_t buf[28] = {0x00};
+
memcpy(buf + 0, uid, 4);
num_to_bytes(nt, 4, buf + 4);
memcpy(buf + 8, par_list, 8);
@@ -2218,14 +2283,13 @@ void ReaderMifare(bool first_try)
cmd_send(CMD_ACK,isOK,0,0,buf,28);
- // Thats it...
+ set_tracing(FALSE);
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LEDsoff();
-
- set_tracing(FALSE);
}
-/**
+
+ /*
*MIFARE 1K simulate.
*
*@param flags :
@@ -2247,7 +2311,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
uint8_t cardWRBL = 0;
uint8_t cardAUTHSC = 0;
uint8_t cardAUTHKEY = 0xff; // no authentication
- uint32_t cardRr = 0;
+// uint32_t cardRr = 0;
uint32_t cuid = 0;
//uint32_t rn_enc = 0;
uint32_t ans = 0;
@@ -2265,16 +2329,17 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID
uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!!
- uint8_t rSAK[] = {0x08, 0xb6, 0xdd};
+ //uint8_t rSAK[] = {0x08, 0xb6, 0xdd}; // Mifare Classic
+ uint8_t rSAK[] = {0x09, 0x3f, 0xcc }; // Mifare Mini
uint8_t rSAK1[] = {0x04, 0xda, 0x17};
- uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04};
+ uint8_t rAUTH_NT[] = {0x01, 0x01, 0x01, 0x01};
uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00};
//Here, we collect UID,NT,AR,NR,UID2,NT2,AR2,NR2
// This can be used in a reader-only attack.
// (it can also be retrieved via 'hf 14a list', but hey...
- uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0};
+ uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0};
uint8_t ar_nr_collected = 0;
// free eventually allocated BigBuf memory but keep Emulator Memory
@@ -2313,6 +2378,11 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
}
}
+ // save uid.
+ ar_nr_responses[0*5] = bytes_to_num(rUIDBCC1+1, 3);
+ if ( _7BUID )
+ ar_nr_responses[0*5+1] = bytes_to_num(rUIDBCC2, 4);
+
/*
* Regardless of what method was used to set the UID, set fifth byte and modify
* the ATQA for 4 or 7-byte UID
@@ -2321,6 +2391,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
if (_7BUID) {
rATQA[0] = 0x44;
rUIDBCC1[0] = 0x88;
+ rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
}
@@ -2354,7 +2425,6 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
if(cardSTATE == MFEMUL_NOFIELD) continue;
//Now, get data
-
res = EmGetCmd(receivedCmd, &len, receivedCmd_par);
if (res == 2) { //Field is off!
cardSTATE = MFEMUL_NOFIELD;
@@ -2425,13 +2495,15 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
uint32_t nr = bytes_to_num(&receivedCmd[4], 4);
//Collect AR/NR
- if(ar_nr_collected < 2 && cardAUTHSC == 2){
+ //if(ar_nr_collected < 2 && cardAUTHSC == 2){
+ if(ar_nr_collected < 2){
if(ar_nr_responses[2] != ar)
{// Avoid duplicates... probably not necessary, ar should vary.
- ar_nr_responses[ar_nr_collected*4] = cuid;
- ar_nr_responses[ar_nr_collected*4+1] = nonce;
- ar_nr_responses[ar_nr_collected*4+2] = ar;
- ar_nr_responses[ar_nr_collected*4+3] = nr;
+ //ar_nr_responses[ar_nr_collected*5] = 0;
+ //ar_nr_responses[ar_nr_collected*5+1] = 0;
+ ar_nr_responses[ar_nr_collected*5+2] = nonce;
+ ar_nr_responses[ar_nr_collected*5+3] = nr;
+ ar_nr_responses[ar_nr_collected*5+4] = ar;
ar_nr_collected++;
}
// Interactive mode flag, means we need to send ACK
@@ -2442,22 +2514,23 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
}
// --- crypto
- crypto1_word(pcs, ar , 1);
- cardRr = nr ^ crypto1_word(pcs, 0, 0);
-
- // test if auth OK
- if (cardRr != prng_successor(nonce, 64)){
- if (MF_DBGLEVEL >= 2) Dbprintf("AUTH FAILED for sector %d with key %c. cardRr=%08x, succ=%08x",
- cardAUTHSC, cardAUTHKEY == 0 ? 'A' : 'B',
- cardRr, prng_successor(nonce, 64));
+ //crypto1_word(pcs, ar , 1);
+ //cardRr = nr ^ crypto1_word(pcs, 0, 0);
+
+ //test if auth OK
+ //if (cardRr != prng_successor(nonce, 64)){
+
+ //if (MF_DBGLEVEL >= 4) Dbprintf("AUTH FAILED for sector %d with key %c. cardRr=%08x, succ=%08x",
+ // cardAUTHSC, cardAUTHKEY == 0 ? 'A' : 'B',
+ // cardRr, prng_successor(nonce, 64));
// Shouldn't we respond anything here?
// Right now, we don't nack or anything, which causes the
// reader to do a WUPA after a while. /Martin
// -- which is the correct response. /piwi
- cardSTATE_TO_IDLE();
- LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
- break;
- }
+ //cardSTATE_TO_IDLE();
+ //LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE);
+ //break;
+ //}
ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0);
@@ -2565,13 +2638,13 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
|| receivedCmd[0] == 0xB0) { // transfer
if (receivedCmd[1] >= 16 * 4) {
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
- if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
+ if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
break;
}
if (receivedCmd[1] / 4 != cardAUTHSC) {
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
- if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC);
+ if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC);
break;
}
}
@@ -2603,7 +2676,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
if (receivedCmd[0] == 0xC0 || receivedCmd[0] == 0xC1 || receivedCmd[0] == 0xC2) {
if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
if (emlCheckValBl(receivedCmd[1])) {
- if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking");
+ if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking");
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
break;
}
@@ -2705,39 +2778,40 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
if(flags & FLAG_INTERACTIVE)// Interactive mode flag, means we need to send ACK
{
//May just aswell send the collected ar_nr in the response aswell
- cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,1,0,&ar_nr_responses,ar_nr_collected*4*4);
+ uint8_t len = ar_nr_collected*5*4;
+ cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len);
}
if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1 )
{
if(ar_nr_collected > 1 ) {
Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:");
- Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x",
- ar_nr_responses[0], // UID
- ar_nr_responses[1], //NT
- ar_nr_responses[2], //AR1
- ar_nr_responses[3], //NR1
- ar_nr_responses[6], //AR2
- ar_nr_responses[7] //NR2
+ Dbprintf("../tools/mfkey/mfkey32 %06x%08x %08x %08x %08x %08x %08x",
+ ar_nr_responses[0], // UID1
+ ar_nr_responses[1], // UID2
+ ar_nr_responses[2], // NT
+ ar_nr_responses[3], // AR1
+ ar_nr_responses[4], // NR1
+ ar_nr_responses[8], // AR2
+ ar_nr_responses[9] // NR2
);
} else {
Dbprintf("Failed to obtain two AR/NR pairs!");
if(ar_nr_collected > 0 ) {
- Dbprintf("Only got these: UID=%08x, nonce=%08x, AR1=%08x, NR1=%08x",
- ar_nr_responses[0], // UID
- ar_nr_responses[1], //NT
- ar_nr_responses[2], //AR1
- ar_nr_responses[3] //NR1
+ Dbprintf("Only got these: UID=%07x%08x, nonce=%08x, AR1=%08x, NR1=%08x",
+ ar_nr_responses[0], // UID1
+ ar_nr_responses[1], // UID2
+ ar_nr_responses[2], // NT
+ ar_nr_responses[3], // AR1
+ ar_nr_responses[4] // NR1
);
}
}
}
- if (MF_DBGLEVEL >= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen());
-
+ if (MF_DBGLEVEL >= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen());
}
-
//-----------------------------------------------------------------------------
// MIFARE sniffer.
//
@@ -2747,6 +2821,9 @@ void RAMFUNC SniffMifare(uint8_t param) {
// bit 0 - trigger from first card answer
// bit 1 - trigger from first reader 7-bit request
+ // free eventually allocated BigBuf memory
+ BigBuf_free();
+
// C(red) A(yellow) B(green)
LEDsoff();
// init trace buffer
@@ -2762,12 +2839,6 @@ void RAMFUNC SniffMifare(uint8_t param) {
uint8_t receivedResponse[MAX_MIFARE_FRAME_SIZE];
uint8_t receivedResponsePar[MAX_MIFARE_PARITY_SIZE];
- // As we receive stuff, we copy it from receivedCmd or receivedResponse
- // into trace, along with its length and other annotations.
- //uint8_t *trace = (uint8_t *)BigBuf;
-
- // free eventually allocated BigBuf memory
- BigBuf_free();
// allocate the DMA buffer, used to stream samples from the FPGA
uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE);
uint8_t *data = dmaBuf;
@@ -2858,7 +2929,8 @@ void RAMFUNC SniffMifare(uint8_t param) {
if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, TRUE)) break;
/* And ready to receive another command. */
- UartInit(receivedCmd, receivedCmdPar);
+ //UartInit(receivedCmd, receivedCmdPar);
+ UartReset();
/* And also reset the demod code */
DemodReset();