X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/472345daee388f8d6786ead2f04b4ae0ff0462d4..7afa751a9673c0427d75116eac14dce2d19adedb:/armsrc/fpgaloader.c

diff --git a/armsrc/fpgaloader.c b/armsrc/fpgaloader.c
index 77223bd0..45294d60 100644
--- a/armsrc/fpgaloader.c
+++ b/armsrc/fpgaloader.c
@@ -112,10 +112,10 @@ void SetupSpi(int mode)
 }
 
 //-----------------------------------------------------------------------------
-// Set up the synchronous serial port, with the one set of options that we
-// always use when we are talking to the FPGA. Both RX and TX are enabled.
+// Set up the synchronous serial port with the set of options that fits
+// the FPGA mode. Both RX and TX are always enabled.
 //-----------------------------------------------------------------------------
-void FpgaSetupSsc(void)
+void FpgaSetupSsc(uint8_t FPGA_mode)
 {
 	// First configure the GPIOs, and get ourselves a clock.
 	AT91C_BASE_PIOA->PIO_ASR =
@@ -134,11 +134,15 @@ void FpgaSetupSsc(void)
 	// on RX clock rising edge, sampled on falling edge
 	AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(1) | SSC_CLOCK_MODE_START(1);
 
-	// 8 bits per transfer, no loopback, MSB first, 1 transfer per sync
+	// 8, 16 or 32 bits per transfer, no loopback, MSB first, 1 transfer per sync
 	// pulse, no output sync
-	AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) |	AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+	if ((FPGA_mode & 0xe0) == FPGA_MAJOR_MODE_HF_READER_RX_XCORR) {
+		AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(16) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+	} else {
+		AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
+	}		
 
-	// clock comes from TK pin, no clock output, outputs change on falling
+	// TX clock comes from TK pin, no clock output, outputs change on falling
 	// edge of TK, sample on rising edge of TK, start on positive-going edge of sync
 	AT91C_BASE_SSC->SSC_TCMR = SSC_CLOCK_MODE_SELECT(2) |	SSC_CLOCK_MODE_START(5);
 
@@ -154,17 +158,16 @@ void FpgaSetupSsc(void)
 // ourselves, not to another buffer). The stuff to manipulate those buffers
 // is in apps.h, because it should be inlined, for speed.
 //-----------------------------------------------------------------------------
-bool FpgaSetupSscDma(uint8_t *buf, int len)
+bool FpgaSetupSscDma(uint8_t *buf, uint16_t sample_count)
 {
 	if (buf == NULL) return false;
 
-	AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;	// Disable DMA Transfer
-	AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf;		// transfer to this memory address
-	AT91C_BASE_PDC_SSC->PDC_RCR = len;					// transfer this many bytes
-	AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf;		// next transfer to same memory address
-	AT91C_BASE_PDC_SSC->PDC_RNCR = len;					// ... with same number of bytes
-	AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;		// go!
-
+	AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS;        // Disable DMA Transfer
+	AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) buf;           // transfer to this memory address
+	AT91C_BASE_PDC_SSC->PDC_RCR = sample_count;             // transfer this many samples
+	AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) buf;          // next transfer to same memory address
+	AT91C_BASE_PDC_SSC->PDC_RNCR = sample_count;            // ... with same number of samples	AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;	        // go!
+	AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTEN;         // go!
 	return true;
 }