X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/5b9fb6f454174c97b80b01811a669737496273ce..8ddfbc34dca5e3780862d97fd7ea91f309bd75a1:/armsrc/lfops.c diff --git a/armsrc/lfops.c b/armsrc/lfops.c index ab86f931..c80700ae 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -1116,10 +1116,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) * Q5 tags seems to have issues when these values changes. */ -#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) -#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) -#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) -#define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 +#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (15fc) +#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (10fc) +#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (24fc) +#define WRITE_1 54*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (56fc) 432 for T55x7; 448 for E5550 #define READ_GAP 15*8 // VALUES TAKEN FROM EM4x function: SendForward @@ -1128,7 +1128,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // WRITE_1 = 256 32*8; (32*8) // These timings work for 4469/4269/4305 (with the 55*8 above) -// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); +// WRITE_0 = 23*8 , 9*8 // Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK) // TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz @@ -1136,7 +1136,10 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) // T0 = TIMER_CLOCK1 / 125000 = 192 // 1 Cycle = 8 microseconds(us) == 1 field clock -void TurnReadLFOn(int delay) { +// new timer: +// = 1us = 1.5ticks +// 1fc = 8us = 12ticks +void TurnReadLFOn(uint32_t delay) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // measure antenna strength. @@ -1221,10 +1224,11 @@ void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550, // so wait a little more) TurnReadLFOn(20 * 1000); - //could attempt to do a read to confirm write took - // as the tag should repeat back the new block - // until it is reset, but to confirm it we would - // need to know the current block 0 config mode + + //could attempt to do a read to confirm write took + // as the tag should repeat back the new block + // until it is reset, but to confirm it we would + // need to know the current block 0 config mode // turn field off FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -1513,9 +1517,9 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) { //----------------------------------- // EM4469 / EM4305 routines //----------------------------------- -#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored -#define FWD_CMD_WRITE 0xA -#define FWD_CMD_READ 0x9 +#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored +#define FWD_CMD_WRITE 0xA +#define FWD_CMD_READ 0x9 #define FWD_CMD_DISABLE 0x5 uint8_t forwardLink_data[64]; //array of forwarded bits @@ -1534,7 +1538,7 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer // WRITE_1 = 256 32*8; (32*8) // These timings work for 4469/4269/4305 (with the 55*8 above) -// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); +// WRITE_0 = 23*8 , 9*8 uint8_t Prepare_Cmd( uint8_t cmd ) { @@ -1639,9 +1643,9 @@ void SendForward(uint8_t fwd_bit_count) { else { //These timings work for 4469/4269/4305 (with the 55*8 above) FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off - WaitUS(23*8); //16-4 cycles off (8us each) // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(16*8); //16-4 cycles off (8us each) // ICEMAN: problem with (us) clock is 21.3us increments FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on - WaitUS(9*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments + WaitUS(16*8); //16 cycles on (8us each) // ICEMAN: problem with (us) clock is 21.3us increments } } } @@ -1649,22 +1653,20 @@ void SendForward(uint8_t fwd_bit_count) { void EM4xLogin(uint32_t Password) { uint8_t fwd_bit_count; - forward_ptr = forwardLink_data; fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN ); fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 ); - SendForward(fwd_bit_count); //Wait for command to complete - SpinDelay(20); + WaitMS(20); } void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { uint8_t fwd_bit_count; uint8_t *dest = BigBuf_get_addr(); - uint16_t bufsize = BigBuf_max_traceLen(); + uint16_t bufsize = BigBuf_max_traceLen(); // ICEMAN: this tries to fill up all tracelog space uint32_t i = 0; // Clear destination buffer before sending the command @@ -1677,14 +1679,10 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { fwd_bit_count = Prepare_Cmd( FWD_CMD_READ ); fwd_bit_count += Prepare_Addr( Address ); - // Connect the A/D to the peak-detected low-frequency path. - SetAdcMuxFor(GPIO_MUXSEL_LOPKD); - // Now set up the SSC to get the ADC samples that are now streaming at us. - FpgaSetupSsc(); - SendForward(fwd_bit_count); // Now do the acquisition + // ICEMAN, change to the one in lfsampling.c i = 0; for(;;) { if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) { @@ -1717,7 +1715,7 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode SendForward(fwd_bit_count); //Wait for write to complete - SpinDelay(20); + WaitMS(20); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); }