X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6426f6ba86c8a2d3e390fab1ced35223a92d8647..ef085a59489765780ce877dd0fba243fd8e9aab3:/armsrc/lfops.c diff --git a/armsrc/lfops.c b/armsrc/lfops.c index 00b50852..5c074c3a 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -17,7 +17,7 @@ #include "lfdemod.h" #include "lfsampling.h" #include "protocols.h" -#include "usb_cdc.h" //test +#include "usb_cdc.h" // for usb_poll_validate_length /** * Function to do a modulation and then get samples. @@ -37,6 +37,8 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint sample_config sc = { 0,0,1, divisor_used, 0}; setSamplingConfig(&sc); + //clear read buffer + BigBuf_Clear_keep_EM(); /* Make sure the tag is reset */ FpgaDownloadAndGo(FPGA_BITSTREAM_LF); @@ -202,8 +204,7 @@ void ReadTItag(void) crc = update_crc16(crc, (shift1>>16)&0xff); crc = update_crc16(crc, (shift1>>24)&0xff); - Dbprintf("Info: Tag data: %x%08x, crc=%x", - (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); + Dbprintf("Info: Tag data: %x%08x, crc=%x", (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); if (crc != (shift2&0xffff)) { Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc); } else { @@ -349,7 +350,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) // start by writing 0xBB (keyword) and 0xEB (password) // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer) // finally end with 0x0300 (write frame) - // all data is sent lsb firts + // all data is sent lsb first // finish with 15ms programming time // modulate antenna @@ -379,7 +380,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) AcquireTiType(); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - DbpString("Now use 'lf ti read' to check"); + DbpString("Now use `lf ti read` to check"); } void SimulateTagLowFrequency(int period, int gap, int ledcontrol) @@ -401,7 +402,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) for(;;) { //wait until SSC_CLK goes HIGH while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) { - if(BUTTON_PRESS() || (usb_poll_validate_length() )) { + if(BUTTON_PRESS() || usb_poll_validate_length() ) { DbpString("Stopped"); return; } @@ -418,7 +419,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) //wait until SSC_CLK goes LOW while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) { - if(BUTTON_PRESS()) { + if( BUTTON_PRESS() || usb_poll_validate_length() ) { DbpString("Stopped"); return; } @@ -595,20 +596,10 @@ void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) } } Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n); - /*Dbprintf("DEBUG: First 32:"); - uint8_t *dest = BigBuf_get_addr(); - i=0; - Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]); - i+=16; - Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]); - */ - if (ledcontrol) - LED_A_ON(); + if (ledcontrol) LED_A_ON(); SimulateTagLowFrequency(n, 0, ledcontrol); - - if (ledcontrol) - LED_A_OFF(); + if (ledcontrol) LED_A_OFF(); } // compose ask waveform for one bit(ASK) @@ -637,7 +628,19 @@ static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase) memset(dest+(*n), c ^ *phase, clock); *phase ^= 1; } + *n += clock; +} +static void stAskSimBit(int *n, uint8_t clock) { + uint8_t *dest = BigBuf_get_addr(); + uint8_t halfClk = clock/2; + //ST = .5 high .5 low 1.5 high .5 low 1 high + memset(dest+(*n), 1, halfClk); + memset(dest+(*n) + halfClk, 0, halfClk); + memset(dest+(*n) + clock, 1, clock + halfClk); + memset(dest+(*n) + clock*2 + halfClk, 0, halfClk); + memset(dest+(*n) + clock*3, 1, clock); + *n += clock*4; } // args clock, ask/man or askraw, invert, transmission separator @@ -655,7 +658,7 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) for (i=0; i>1) & 0xFFFF ); - }else { //standard HID tags 44/96 bits + } else { //standard HID tags 44/96 bits uint8_t bitlen = 0; uint32_t fc = 0; uint32_t cardnum = 0; @@ -826,6 +834,8 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) uint8_t *dest = BigBuf_get_addr(); size_t size; int idx=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -839,7 +849,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) size = 50*128*2; //big enough to catch 2 sequences of largest format idx = AWIDdemodFSK(dest, &size); - if (idx>0 && size==96){ + if (idx<=0 || size!=96) continue; // Index map // 0 10 20 30 40 50 60 // | | | | | | | @@ -859,6 +869,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) uint32_t rawHi2 = bytebits_to_byte(dest+idx,32); size = removeParity(dest, idx+8, 4, 1, 88); + if (size != 66) continue; // ok valid card found! // Index map @@ -900,7 +911,6 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) return; } // reset - } idx = 0; WDT_HIT(); } @@ -916,6 +926,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) int clk=0, invert=0, errCnt=0, maxErr=20; uint32_t hi=0; uint64_t lo=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -977,7 +989,11 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) uint16_t number=0; uint8_t crc = 0; uint16_t calccrc = 0; - // Configure to go in 125Khz listen mode + + //clear read buffer + BigBuf_Clear_keep_EM(); + +// Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); while(!BUTTON_PRESS() && !usb_poll_validate_length()) { @@ -1061,9 +1077,9 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) * Q5 tags seems to have issues when these values changes. */ -#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) +#define START_GAP 31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) #define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) -#define WRITE_0 16*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) +#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) #define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 #define READ_GAP 15*8 @@ -1106,7 +1122,7 @@ void T55xxWriteBit(int bit) { void T55xxResetRead(void) { LED_A_ON(); //clear buffer now so it does not interfere with timing later - BigBuf_Clear_ext(false); + BigBuf_Clear_keep_EM(); // Set up FPGA, 125kHz LFSetupFPGAForADC(95, true); @@ -1257,22 +1273,20 @@ void T55xxWakeUp(uint32_t Pwd){ } /*-------------- Cloning routines -----------*/ - void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) { // write last block first and config block last (if included) for (uint8_t i = numblocks+startblock; i > startblock; i--) - T55xxWriteBlockExt(blockdata[i-1],i-1,0,0); + T55xxWriteBlockExt(blockdata[i-1], i-1, 0, 0); } // Copy HID id to card and setup block 0 config void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { uint32_t data[] = {0,0,0,0,0,0,0}; - //int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format uint8_t last_block = 0; if (longFMT){ // Ensure no more than 84 bits supplied - if (hi2>0xFFFFF) { + if (hi2 > 0xFFFFF) { DbpString("Tags can only have 84 bits."); return; } @@ -1288,7 +1302,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { data[6] = manchesterEncode2Bytes(lo & 0xFFFF); } else { // Ensure no more than 44 bits supplied - if (hi>0xFFF) { + if (hi > 0xFFF) { DbpString("Tags can only have 44 bits."); return; } @@ -1357,6 +1371,15 @@ void CopyIndala224toT55x7(uint32_t uid1, uint32_t uid2, uint32_t uid3, uint32_t // T5567WriteBlock(0x603E10E2,0); DbpString("DONE!"); } +// clone viking tag to T55xx +void CopyVikingtoT55xx(uint32_t block1, uint32_t block2, uint8_t Q5) { + uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2}; + if (Q5) data[0] = (32 << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | 2 << T5555_MAXBLOCK_SHIFT; + // Program the data blocks for supplied ID and the block 0 config + WriteT55xx(data, 0, 3); + LED_D_OFF(); + cmd_send(CMD_ACK,0,0,0,0,0); +} // Define 9bit header for EM410x tags #define EM410X_HEADER 0x1FF @@ -1422,11 +1445,11 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) { LED_D_ON(); // Write EM410x ID - uint32_t data[] = {0, id>>32, id & 0xFFFFFFFF}; + uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)}; - clock = (card & 0xFF00) >> 8; - clock = (clock == 0) ? 64 : clock; - Dbprintf("Clock rate: %d", clock); + clock = (card & 0xFF00) >> 8; + clock = (clock == 0) ? 64 : clock; + Dbprintf("Clock rate: %d", clock); if (card & 0xFF) { //t55x7 clock = GetT55xxClockBit(clock); if (clock == 0) { @@ -1442,8 +1465,10 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo) { WriteT55xx(data, 0, 3); LED_D_OFF(); - Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555", - (uint32_t)(id >> 32), (uint32_t)id); + Dbprintf("Tag %s written with 0x%08x%08x\n", + card ? "T55x7":"T5555", + (uint32_t)(id >> 32), + (uint32_t)id); } //----------------------------------- @@ -1603,7 +1628,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { uint16_t bufsize = BigBuf_max_traceLen(); uint32_t i = 0; - //clear buffer now so it does not interfere with timing later + // Clear destination buffer before sending the command BigBuf_Clear_ext(false); //If password mode do login @@ -1657,12 +1682,3 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); } - -void CopyViKingtoT55x7(uint32_t block1, uint32_t block2) { - - uint32_t data[] = {T55x7_BITRATE_RF_32 | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT), block1, block2}; - // Program the data blocks for supplied ID and the block 0 config - WriteT55xx(data, 0, 3); - LED_D_OFF(); -} -