X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/653e5ed3ca3f8bf4ae677900ae4860a8cf7026c1..ae3340a0fb04bf8f8b8c874e0859d7d0886e2db1:/armsrc/iso14443a.c diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index a0fe2326..059db71e 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -189,13 +189,14 @@ void iso14a_set_trigger(bool enable) { void iso14a_set_timeout(uint32_t timeout) { - iso14a_timeout = timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8); + // adjust timeout by FPGA delays and 2 additional ssp_frames to detect SOF + iso14a_timeout = timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8) + 2; if(MF_DBGLEVEL >= 3) Dbprintf("ISO14443A Timeout set to %ld (%dms)", timeout, timeout / 106); } uint32_t iso14a_get_timeout(void) { - return iso14a_timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8); + return iso14a_timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8) - 2; } //----------------------------------------------------------------------------- @@ -1404,7 +1405,7 @@ int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity) ADC_MODE_PRESCALE(63) | ADC_MODE_STARTUP_TIME(1) | ADC_MODE_SAMPLE_HOLD_TIME(15); - AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF); + AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF_LOW); // start ADC AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START; @@ -1431,12 +1432,12 @@ int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity) if (BUTTON_PRESS()) return 1; // test if the field exists - if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF)) { + if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF_LOW)) { analogCnt++; - analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF]; + analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF_LOW]; AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START; if (analogCnt >= 32) { - if ((MAX_ADC_HF_VOLTAGE * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) { + if ((MAX_ADC_HF_VOLTAGE_LOW * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) { vtime = GetTickCount(); if (!timer) timer = vtime; // 50ms no field --> card to idle state @@ -1888,7 +1889,7 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u void iso14443a_setup(uint8_t fpga_minor_mode) { FpgaDownloadAndGo(FPGA_BITSTREAM_HF); // Set up the synchronous serial port - FpgaSetupSsc(); + FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO14443A); // connect Demodulated Signal to ADC: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); @@ -1955,9 +1956,9 @@ int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { } else{ // S-Block WTX while((data_bytes[0] & 0xF2) == 0xF2) { - uint32_t save_iso14a_timeout = iso14a_timeout; + uint32_t save_iso14a_timeout = iso14a_get_timeout(); // temporarily increase timeout - iso14a_timeout = MAX((data_bytes[1] & 0x3f) * iso14a_timeout, MAX_ISO14A_TIMEOUT); + iso14a_set_timeout(MAX((data_bytes[1] & 0x3f) * save_iso14a_timeout, MAX_ISO14A_TIMEOUT)); // Transmit WTX back // byte1 - WTXM [1..59]. command FWT=FWT*WTXM data_bytes[1] = data_bytes[1] & 0x3f; // 2 high bits mandatory set to 0b @@ -1969,7 +1970,7 @@ int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { len = ReaderReceive(data, parity); data_bytes = data; // restore timeout - iso14a_timeout = save_iso14a_timeout; + iso14a_set_timeout(save_iso14a_timeout); } // if we received an I- or R(ACK)-Block with a block number equal to the @@ -2150,9 +2151,7 @@ void ReaderMifare(bool first_try) uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE]; uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE]; - if (first_try) { - iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); - } + iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); // free eventually allocated BigBuf memory. We want all for tracing. BigBuf_free(); @@ -2160,9 +2159,9 @@ void ReaderMifare(bool first_try) clear_trace(); set_tracing(true); - byte_t nt_diff = 0; + uint8_t nt_diff = 0; uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough - static byte_t par_low = 0; + static uint8_t par_low = 0; bool led_on = true; uint8_t uid[10] ={0}; uint32_t cuid; @@ -2170,11 +2169,11 @@ void ReaderMifare(bool first_try) uint32_t nt = 0; uint32_t previous_nt = 0; static uint32_t nt_attacked = 0; - byte_t par_list[8] = {0x00}; - byte_t ks_list[8] = {0x00}; + uint8_t par_list[8] = {0x00}; + uint8_t ks_list[8] = {0x00}; #define PRNG_SEQUENCE_LENGTH (1 << 16); - static uint32_t sync_time; + uint32_t sync_time = GetCountSspClk() & 0xfffffff8; static int32_t sync_cycles; int catch_up_cycles = 0; int last_catch_up = 0; @@ -2184,10 +2183,9 @@ void ReaderMifare(bool first_try) if (first_try) { mf_nr_ar3 = 0; - sync_time = GetCountSspClk() & 0xfffffff8; + par[0] = par_low = 0; sync_cycles = PRNG_SEQUENCE_LENGTH; // theory: Mifare Classic's random generator repeats every 2^16 cycles (and so do the tag nonces). nt_attacked = 0; - par[0] = 0; } else { // we were unsuccessful on a previous call. Try another READER nonce (first 3 parity bits remain the same) @@ -2203,6 +2201,7 @@ void ReaderMifare(bool first_try) #define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up. #define MAX_SYNC_TRIES 32 + #define SYNC_TIME_BUFFER 16 // if there is only SYNC_TIME_BUFFER left before next planned sync, wait for next PRNG cycle #define NUM_DEBUG_INFOS 8 // per strategy #define MAX_STRATEGY 3 uint16_t unexpected_random = 0; @@ -2252,8 +2251,8 @@ void ReaderMifare(bool first_try) sync_time = (sync_time & 0xfffffff8) + sync_cycles + catch_up_cycles; catch_up_cycles = 0; - // if we missed the sync time already, advance to the next nonce repeat - while(GetCountSspClk() > sync_time) { + // if we missed the sync time already or are about to miss it, advance to the next nonce repeat + while(sync_time < GetCountSspClk() + SYNC_TIME_BUFFER) { elapsed_prng_sequences++; sync_time = (sync_time & 0xfffffff8) + sync_cycles; } @@ -2409,14 +2408,14 @@ void ReaderMifare(bool first_try) } } - byte_t buf[28]; + uint8_t buf[32]; memcpy(buf + 0, uid, 4); num_to_bytes(nt, 4, buf + 4); memcpy(buf + 8, par_list, 8); memcpy(buf + 16, ks_list, 8); - memcpy(buf + 24, mf_nr_ar, 4); + memcpy(buf + 24, mf_nr_ar, 8); - cmd_send(CMD_ACK, isOK, 0, 0, buf, 28); + cmd_send(CMD_ACK, isOK, 0, 0, buf, 32); // Thats it... FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -2481,7 +2480,7 @@ void RAMFUNC SniffMifare(uint8_t param) { for(uint32_t sniffCounter = 0; true; ) { if(BUTTON_PRESS()) { - DbpString("cancelled by button"); + DbpString("Canceled by button."); break; } @@ -2538,7 +2537,9 @@ void RAMFUNC SniffMifare(uint8_t param) { if(!TagIsActive) { // no need to try decoding tag data if the reader is sending uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4); if(MillerDecoding(readerdata, (sniffCounter-1)*4)) { - LED_C_INV(); + LED_B_ON(); + LED_C_OFF(); + if (MfSniffLogic(receivedCmd, Uart.len, Uart.parity, Uart.bitCount, true)) break; /* And ready to receive another command. */ @@ -2553,7 +2554,8 @@ void RAMFUNC SniffMifare(uint8_t param) { if(!ReaderIsActive) { // no need to try decoding tag data if the reader is sending uint8_t tagdata = (previous_data << 4) | (*data & 0x0F); if(ManchesterDecoding(tagdata, 0, (sniffCounter-1)*4)) { - LED_C_INV(); + LED_B_OFF(); + LED_C_ON(); if (MfSniffLogic(receivedResponse, Demod.len, Demod.parity, Demod.bitCount, false)) break; @@ -2575,7 +2577,7 @@ void RAMFUNC SniffMifare(uint8_t param) { } // main cycle - DbpString("COMMAND FINISHED"); + DbpString("COMMAND FINISHED."); FpgaDisableSscDma(); MfSniffEnd();