X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6658905f18a1eebc148836f26c731dea9c1377dc..249deb42a0e044337a14f74d0a032b340aaaf68b:/armsrc/iso14443.c?ds=sidebyside diff --git a/armsrc/iso14443.c b/armsrc/iso14443.c index 2a079fdb..fbc3a6d4 100644 --- a/armsrc/iso14443.c +++ b/armsrc/iso14443.c @@ -6,7 +6,7 @@ //----------------------------------------------------------------------------- #include #include "apps.h" -#include "..\common\iso14443_crc.c" +#include "../common/iso14443_crc.c" //static void GetSamplesFor14443(BOOL weTx, int n); @@ -131,10 +131,20 @@ static struct { BYTE *output; } Uart; +/* Receive & handle a bit coming from the reader. + * + * LED handling: + * LED A -> ON once we have received the SOF and are expecting the rest. + * LED A -> OFF once we have received EOF or are in error state or unsynced + * + * Returns: true if we received a EOF + * false if we are still waiting for some more + */ static BOOL Handle14443UartBit(int bit) { switch(Uart.state) { case STATE_UNSYNCD: + LED_A_OFF(); if(!bit) { // we went low, so this could be the beginning // of an SOF @@ -154,6 +164,7 @@ static BOOL Handle14443UartBit(int bit) Uart.posCnt = 0; Uart.byteCnt = 0; Uart.state = STATE_AWAITING_START_BIT; + LED_A_ON(); // Indicate we got a valid SOF } else { // didn't stay down long enough // before going high, error @@ -186,6 +197,7 @@ static BOOL Handle14443UartBit(int bit) Uart.bitCnt = 0; Uart.shiftReg = 0; Uart.state = STATE_RECEIVING_DATA; + LED_A_ON(); // Indicate we're receiving } break; @@ -221,6 +233,7 @@ static BOOL Handle14443UartBit(int bit) } } else if(Uart.shiftReg == 0x000) { // this is an EOF byte + LED_A_OFF(); // Finished receiving return TRUE; } else { // this is an error @@ -245,6 +258,8 @@ static BOOL Handle14443UartBit(int bit) break; } + if (Uart.state == STATE_ERROR_WAIT) LED_A_OFF(); // Error + return FALSE; } @@ -264,6 +279,8 @@ static BOOL GetIso14443CommandFromReader(BYTE *received, int *len, int maxLen) // Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen // only, since we are receiving, not transmitting). + // Signal field is off with the appropriate LED + LED_D_OFF(); FpgaWriteConfWord( FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION); @@ -278,11 +295,11 @@ static BOOL GetIso14443CommandFromReader(BYTE *received, int *len, int maxLen) if(BUTTON_PRESS()) return FALSE; - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0x00; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0x00; } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - BYTE b = (BYTE)SSC_RECEIVE_HOLDING; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + BYTE b = (BYTE)AT91C_BASE_SSC->SSC_RHR; mask = 0x80; for(i = 0; i < 8; i++, mask >>= 1) { @@ -371,26 +388,28 @@ void SimulateIso14443Tag(void) if(respLen <= 0) continue; // Modulate BPSK + // Signal field is off with the appropriate LED + LED_D_OFF(); FpgaWriteConfWord( FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_BPSK); - SSC_TRANSMIT_HOLDING = 0xff; + AT91C_BASE_SSC->SSC_THR = 0xff; FpgaSetupSsc(); // Transmit the response. i = 0; for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { BYTE b = resp[i]; - SSC_TRANSMIT_HOLDING = b; + AT91C_BASE_SSC->SSC_THR = b; i++; if(i > respLen) { break; } } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - volatile BYTE b = (BYTE)SSC_RECEIVE_HOLDING; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + volatile BYTE b = (BYTE)AT91C_BASE_SSC->SSC_RHR; (void)b; } } @@ -426,6 +445,17 @@ static struct { int sumQ; } Demod; +/* + * Handles reception of a bit from the tag + * + * LED handling: + * LED C -> ON once we have received the SOF and are expecting the rest. + * LED C -> OFF once we have received EOF or are unsynced + * + * Returns: true if we received a EOF + * false if we are still waiting for some more + * + */ static BOOL Handle14443SamplesDemod(int ci, int cq) { int v; @@ -498,6 +528,7 @@ static BOOL Handle14443SamplesDemod(int ci, int cq) if(Demod.posCount < 12) { Demod.state = DEMOD_UNSYNCD; } else { + LED_C_ON(); // Got SOF Demod.state = DEMOD_AWAITING_START_BIT; Demod.posCount = 0; Demod.len = 0; @@ -557,6 +588,7 @@ static BOOL Handle14443SamplesDemod(int ci, int cq) Demod.state = DEMOD_AWAITING_START_BIT; } else if(s == 0x000) { // This is EOF + LED_C_OFF(); return TRUE; Demod.state = DEMOD_UNSYNCD; } else { @@ -572,10 +604,17 @@ static BOOL Handle14443SamplesDemod(int ci, int cq) break; } + if (Demod.state == DEMOD_UNSYNCD) LED_C_OFF(); // Not synchronized... return FALSE; } -static void GetSamplesFor14443Demod(BOOL weTx, int n) +/* + * Demodulate the samples we received from the tag + * weTx: set to 'TRUE' if we behave like a reader + * set to 'FALSE' if we behave like a snooper + * quiet: set to 'TRUE' to disable debug output + */ +static void GetSamplesFor14443Demod(BOOL weTx, int n, BOOL quiet) { int max = 0; BOOL gotFrame = FALSE; @@ -607,17 +646,18 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n) lastRxCounter = DMA_BUFFER_SIZE; FpgaSetupSscDma((BYTE *)dmaBuf, DMA_BUFFER_SIZE); + // Signal field is ON with the appropriate LED: + if (weTx) LED_D_ON(); else LED_D_OFF(); // And put the FPGA in the appropriate mode FpgaWriteConfWord( FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | (weTx ? 0 : FPGA_HF_READER_RX_XCORR_SNOOP)); for(;;) { - int behindBy = lastRxCounter - PDC_RX_COUNTER(SSC_BASE); + int behindBy = lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR; if(behindBy > max) max = behindBy; - LED_D_ON(); - while(((lastRxCounter-PDC_RX_COUNTER(SSC_BASE)) & (DMA_BUFFER_SIZE-1)) + while(((lastRxCounter-AT91C_BASE_PDC_SSC->PDC_RCR) & (DMA_BUFFER_SIZE-1)) > 2) { ci = upTo[0]; @@ -625,8 +665,8 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n) upTo += 2; if(upTo - dmaBuf > DMA_BUFFER_SIZE) { upTo -= DMA_BUFFER_SIZE; - PDC_RX_NEXT_POINTER(SSC_BASE) = (DWORD)upTo; - PDC_RX_NEXT_COUNTER(SSC_BASE) = DMA_BUFFER_SIZE; + AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD)upTo; + AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; } lastRxCounter -= 2; if(lastRxCounter <= 0) { @@ -642,14 +682,13 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n) gotFrame = 1; } } - LED_D_OFF(); if(samples > 2000) { break; } } - PDC_CONTROL(SSC_BASE) = PDC_RX_DISABLE; - DbpIntegers(max, gotFrame, -1); + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; + if (!quiet) DbpIntegers(max, gotFrame, Demod.len); } //----------------------------------------------------------------------------- @@ -668,12 +707,12 @@ static void GetSamplesFor14443Demod(BOOL weTx, int n) c = 0; for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0x43; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0x43; } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { SBYTE b; - b = (SBYTE)SSC_RECEIVE_HOLDING; + b = (SBYTE)AT91C_BASE_SSC->SSC_RHR; dest[c++] = (BYTE)b; @@ -693,20 +732,24 @@ static void TransmitFor14443(void) FpgaSetupSsc(); - while(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0xff; + while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0xff; } - FpgaWriteConfWord( + // Signal field is ON with the appropriate Red LED + LED_D_ON(); + // Signal we are transmitting with the Green LED + LED_B_ON(); + FpgaWriteConfWord( FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD); for(c = 0; c < 10;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = 0xff; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0xff; c++; } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - volatile DWORD r = SSC_RECEIVE_HOLDING; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + volatile DWORD r = AT91C_BASE_SSC->SSC_RHR; (void)r; } WDT_HIT(); @@ -714,19 +757,20 @@ static void TransmitFor14443(void) c = 0; for(;;) { - if(SSC_STATUS & (SSC_STATUS_TX_READY)) { - SSC_TRANSMIT_HOLDING = ToSend[c]; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = ToSend[c]; c++; if(c >= ToSendMax) { break; } } - if(SSC_STATUS & (SSC_STATUS_RX_READY)) { - volatile DWORD r = SSC_RECEIVE_HOLDING; + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) { + volatile DWORD r = AT91C_BASE_SSC->SSC_RHR; (void)r; } WDT_HIT(); } + LED_B_OFF(); // Finished sending } //----------------------------------------------------------------------------- @@ -788,12 +832,58 @@ void CodeIso14443bAsReader(const BYTE *cmd, int len) //----------------------------------------------------------------------------- // Read an ISO 14443 tag. We send it some set of commands, and record the // responses. +// The command name is misleading, it actually decodes the reponse in HEX +// into the output buffer (read the result using hexsamples, not hisamples) //----------------------------------------------------------------------------- void AcquireRawAdcSamplesIso14443(DWORD parameter) { -// BYTE cmd1[] = { 0x05, 0x00, 0x00, 0x71, 0xff }; BYTE cmd1[] = { 0x05, 0x00, 0x08, 0x39, 0x73 }; + // Make sure that we start from off, since the tags are stateful; + // confusing things will happen if we don't reset them between reads. + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + LED_D_OFF(); + SpinDelay(200); + + SetAdcMuxFor(GPIO_MUXSEL_HIPKD); + FpgaSetupSsc(); + + // Now give it time to spin up. + // Signal field is on with the appropriate LED + LED_D_ON(); + FpgaWriteConfWord( + FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ); + SpinDelay(200); + + CodeIso14443bAsReader(cmd1, sizeof(cmd1)); + TransmitFor14443(); +// LED_A_ON(); + GetSamplesFor14443Demod(TRUE, 2000, FALSE); +// LED_A_OFF(); +} + +//----------------------------------------------------------------------------- +// Read a SRI512 ISO 14443 tag. +// +// SRI512 tags are just simple memory tags, here we're looking at making a dump +// of the contents of the memory. No anticollision algorithm is done, we assume +// we have a single tag in the field. +// +// I tried to be systematic and check every answer of the tag, every CRC, etc... +//----------------------------------------------------------------------------- +void ReadSRI512Iso14443(DWORD parameter) +{ + ReadSTMemoryIso14443(parameter,0x0F); +} +void ReadSRIX4KIso14443(DWORD parameter) +{ + ReadSTMemoryIso14443(parameter,0x7F); +} + +void ReadSTMemoryIso14443(DWORD parameter,DWORD dwLast) +{ + BYTE i = 0x00; + // Make sure that we start from off, since the tags are stateful; // confusing things will happen if we don't reset them between reads. LED_D_OFF(); @@ -804,17 +894,117 @@ void AcquireRawAdcSamplesIso14443(DWORD parameter) FpgaSetupSsc(); // Now give it time to spin up. + // Signal field is on with the appropriate LED + LED_D_ON(); FpgaWriteConfWord( FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ); SpinDelay(200); + // First command: wake up the tag using the INITIATE command + BYTE cmd1[] = { 0x06, 0x00, 0x97, 0x5b}; CodeIso14443bAsReader(cmd1, sizeof(cmd1)); TransmitFor14443(); - LED_A_ON(); - GetSamplesFor14443Demod(TRUE, 2000); - LED_A_OFF(); +// LED_A_ON(); + GetSamplesFor14443Demod(TRUE, 2000,TRUE); +// LED_A_OFF(); + + if (Demod.len == 0) { + DbpString("No response from tag"); + return; + } else { + DbpString("Randomly generated UID from tag (+ 2 byte CRC):"); + DbpIntegers(Demod.output[0], Demod.output[1],Demod.output[2]); + } + // There is a response, SELECT the uid + DbpString("Now SELECT tag:"); + cmd1[0] = 0x0E; // 0x0E is SELECT + cmd1[1] = Demod.output[0]; + ComputeCrc14443(CRC_14443_B, cmd1, 2, &cmd1[2], &cmd1[3]); + CodeIso14443bAsReader(cmd1, sizeof(cmd1)); + TransmitFor14443(); +// LED_A_ON(); + GetSamplesFor14443Demod(TRUE, 2000,TRUE); +// LED_A_OFF(); + if (Demod.len != 3) { + DbpString("Expected 3 bytes from tag, got:"); + DbpIntegers(Demod.len,0x0,0x0); + return; + } + // Check the CRC of the answer: + ComputeCrc14443(CRC_14443_B, Demod.output, 1 , &cmd1[2], &cmd1[3]); + if(cmd1[2] != Demod.output[1] || cmd1[3] != Demod.output[2]) { + DbpString("CRC Error reading select response."); + return; + } + // Check response from the tag: should be the same UID as the command we just sent: + if (cmd1[1] != Demod.output[0]) { + DbpString("Bad response to SELECT from Tag, aborting:"); + DbpIntegers(cmd1[1],Demod.output[0],0x0); + return; + } + // Tag is now selected, + // First get the tag's UID: + cmd1[0] = 0x0B; + ComputeCrc14443(CRC_14443_B, cmd1, 1 , &cmd1[1], &cmd1[2]); + CodeIso14443bAsReader(cmd1, 3); // Only first three bytes for this one + TransmitFor14443(); +// LED_A_ON(); + GetSamplesFor14443Demod(TRUE, 2000,TRUE); +// LED_A_OFF(); + if (Demod.len != 10) { + DbpString("Expected 10 bytes from tag, got:"); + DbpIntegers(Demod.len,0x0,0x0); + return; + } + // The check the CRC of the answer (use cmd1 as temporary variable): + ComputeCrc14443(CRC_14443_B, Demod.output, 8, &cmd1[2], &cmd1[3]); + if(cmd1[2] != Demod.output[8] || cmd1[3] != Demod.output[9]) { + DbpString("CRC Error reading block! - Below: expected, got"); + DbpIntegers( (cmd1[2]<<8)+cmd1[3], (Demod.output[8]<<8)+Demod.output[9],0); + // Do not return;, let's go on... (we should retry, maybe ?) + } + DbpString("Tag UID (64 bits):"); + DbpIntegers((Demod.output[7]<<24) + (Demod.output[6]<<16) + (Demod.output[5]<<8) + Demod.output[4], (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0], 0); + + // Now loop to read all 16 blocks, address from 0 to 15 + DbpString("Tag memory dump, block 0 to 15"); + cmd1[0] = 0x08; + i = 0x00; + dwLast++; + for (;;) { + if (i == dwLast) { + DbpString("System area block (0xff):"); + i = 0xff; + } + cmd1[1] = i; + ComputeCrc14443(CRC_14443_B, cmd1, 2, &cmd1[2], &cmd1[3]); + CodeIso14443bAsReader(cmd1, sizeof(cmd1)); + TransmitFor14443(); +// LED_A_ON(); + GetSamplesFor14443Demod(TRUE, 2000,TRUE); +// LED_A_OFF(); + if (Demod.len != 6) { // Check if we got an answer from the tag + DbpString("Expected 6 bytes from tag, got less..."); + return; + } + // The check the CRC of the answer (use cmd1 as temporary variable): + ComputeCrc14443(CRC_14443_B, Demod.output, 4, &cmd1[2], &cmd1[3]); + if(cmd1[2] != Demod.output[4] || cmd1[3] != Demod.output[5]) { + DbpString("CRC Error reading block! - Below: expected, got"); + DbpIntegers( (cmd1[2]<<8)+cmd1[3], (Demod.output[4]<<8)+Demod.output[5],0); + // Do not return;, let's go on... (we should retry, maybe ?) + } + // Now print out the memory location: + DbpString("Address , Contents, CRC"); + DbpIntegers(i, (Demod.output[3]<<24) + (Demod.output[2]<<16) + (Demod.output[1]<<8) + Demod.output[0], (Demod.output[4]<<8)+Demod.output[5]); + if (i == 0xff) { + break; + } + i++; + } } + //============================================================================= // Finally, the `sniffer' combines elements from both the reader and // simulated tag, to show both sides of the conversation. @@ -825,6 +1015,13 @@ void AcquireRawAdcSamplesIso14443(DWORD parameter) // triggering so that we start recording at the point that the tag is moved // near the reader. //----------------------------------------------------------------------------- +/* + * Memory usage for this function, (within BigBuf) + * 0-1023 : Demodulated samples receive (1024 bytes) + * 1024-1535 : Last Received command, 512 bytes (reader->tag) + * 1536-2047 : Last Received command, 512 bytes(tag->reader) + * 2048-2304 : DMA Buffer, 256 bytes (samples) + */ void SnoopIso14443(void) { // We won't start recording the frames that we acquire until we trigger; @@ -833,9 +1030,9 @@ void SnoopIso14443(void) BOOL triggered = FALSE; // The command (reader -> tag) that we're working on receiving. - BYTE *receivedCmd = (((BYTE *)BigBuf) + 1024); + BYTE *receivedCmd = (BYTE *)(BigBuf) + 1024; // The response (tag -> reader) that we're working on receiving. - BYTE *receivedResponse = (((BYTE *)BigBuf) + 1536); + BYTE *receivedResponse = (BYTE *)(BigBuf) + 1536; // As we receive stuff, we copy it from receivedCmd or receivedResponse // into trace, along with its length and other annotations. @@ -843,8 +1040,7 @@ void SnoopIso14443(void) int traceLen = 0; // The DMA buffer, used to stream samples from the FPGA. -//# define DMA_BUFFER_SIZE 256 - SBYTE *dmaBuf = ((SBYTE *)BigBuf) + 2048; + SBYTE *dmaBuf = (SBYTE *)(BigBuf) + 2048; int lastRxCounter; SBYTE *upTo; int ci, cq; @@ -854,7 +1050,8 @@ void SnoopIso14443(void) // information in the trace buffer. int samples = 0; - memset(trace, 0x44, 1000); + // Initialize the trace buffer + memset(trace, 0x44, 1024); // Set up the demodulator for tag -> reader responses. Demod.output = receivedResponse; @@ -868,6 +1065,8 @@ void SnoopIso14443(void) Uart.state = STATE_UNSYNCD; // And put the FPGA in the appropriate mode + // Signal field is off with the appropriate LED + LED_D_OFF(); FpgaWriteConfWord( FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ | FPGA_HF_READER_RX_XCORR_SNOOP); @@ -878,17 +1077,15 @@ void SnoopIso14443(void) upTo = dmaBuf; lastRxCounter = DMA_BUFFER_SIZE; FpgaSetupSscDma((BYTE *)dmaBuf, DMA_BUFFER_SIZE); - - LED_A_ON(); - // And now we loop, receiving samples. for(;;) { - int behindBy = (lastRxCounter - PDC_RX_COUNTER(SSC_BASE)) & + int behindBy = (lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR) & (DMA_BUFFER_SIZE-1); if(behindBy > maxBehindBy) { maxBehindBy = behindBy; - if(behindBy > 100) { + if(behindBy > (DMA_BUFFER_SIZE-2)) { // TODO: understand whether we can increase/decrease as we want or not? DbpString("blew circular buffer!"); + DbpIntegers(behindBy,0,0); goto done; } } @@ -901,8 +1098,8 @@ void SnoopIso14443(void) if(upTo - dmaBuf > DMA_BUFFER_SIZE) { upTo -= DMA_BUFFER_SIZE; lastRxCounter += DMA_BUFFER_SIZE; - PDC_RX_NEXT_POINTER(SSC_BASE) = (DWORD)upTo; - PDC_RX_NEXT_COUNTER(SSC_BASE) = DMA_BUFFER_SIZE; + AT91C_BASE_PDC_SSC->PDC_RNPR = (DWORD) upTo; + AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE; } samples += 2; @@ -961,14 +1158,13 @@ void SnoopIso14443(void) if(traceLen > 1000) break; triggered = TRUE; - LED_A_OFF(); - LED_B_ON(); // And ready to receive another response. memset(&Demod, 0, sizeof(Demod)); Demod.output = receivedResponse; Demod.state = DEMOD_UNSYNCD; } + WDT_HIT(); if(BUTTON_PRESS()) { DbpString("cancelled"); @@ -982,7 +1178,6 @@ void SnoopIso14443(void) DbpIntegers(Uart.byteCntMax, traceLen, 0x23); done: - PDC_CONTROL(SSC_BASE) = PDC_RX_DISABLE; - LED_A_OFF(); - LED_B_OFF(); + LED_D_OFF(); + AT91C_BASE_PDC_SSC->PDC_PTCR = AT91C_PDC_RXTDIS; }