X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6949aca9fa0e37539fc277bac78e3d7a22117467..a72971eb8cd0c6524b938ceb5d297efaebacffd6:/bootrom/bootrom.c?ds=sidebyside diff --git a/bootrom/bootrom.c b/bootrom/bootrom.c index 7b29ad97..26231b01 100644 --- a/bootrom/bootrom.c +++ b/bootrom/bootrom.c @@ -1,296 +1,326 @@ -#include - -struct common_area common_area __attribute__((section(".commonarea"))); -unsigned int start_addr, end_addr, bootrom_unlocked; -extern char _bootrom_start, _bootrom_end, _flash_start, _flash_end; - -static void ConfigClocks(void) -{ - // we are using a 16 MHz crystal as the basis for everything - // slow clock runs at 32Khz typical regardless of crystal - - // enable system clock and USB clock - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK | AT91C_PMC_UDP; - - // enable the clock to the following peripherals - AT91C_BASE_PMC->PMC_PCER = - (1<PMC_MOR = - PMC_MAIN_OSC_ENABLE | - PMC_MAIN_OSC_STARTUP_DELAY(0x50); - - // wait for main oscillator to stabilize - while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_STABILIZED) ) - ; - - // minimum PLL clock frequency is 80 MHz in range 00 (96 here so okay) - // frequency is crystal * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz - AT91C_BASE_PMC->PMC_PLLR = - PMC_PLL_DIVISOR(2) | - PMC_PLL_COUNT_BEFORE_LOCK(0x50) | - PMC_PLL_FREQUENCY_RANGE(0) | - PMC_PLL_MULTIPLIER(12) | - PMC_PLL_USB_DIVISOR(1); - - // wait for PLL to lock - while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_PLL_LOCK) ) - ; - - // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz - // as per datasheet, this register must be programmed in two operations - // when changing to PLL, program the prescaler first then the source - AT91C_BASE_PMC->PMC_MCKR = PMC_CLK_PRESCALE_DIV_2; - - // wait for main clock ready signal - while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) ) - ; - - // set the source to PLL - AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | PMC_CLK_PRESCALE_DIV_2; - - // wait for main clock ready signal - while ( !(AT91C_BASE_PMC->PMC_SR & PMC_MAIN_OSC_MCK_READY) ) - ; -} - -static void Fatal(void) -{ - for(;;); -} - -void UsbPacketReceived(BYTE *packet, int len) -{ - int i, dont_ack=0; - UsbCommand *c = (UsbCommand *)packet; - volatile DWORD *p; - - if(len != sizeof(*c)) { - Fatal(); - } - - switch(c->cmd) { - case CMD_DEVICE_INFO: - dont_ack = 1; - c->cmd = CMD_DEVICE_INFO; - c->ext1 = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM | - DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH; - if(common_area.flags.osimage_present) c->ext1 |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT; - UsbSendPacket(packet, len); - break; - - case CMD_SETUP_WRITE: - /* The temporary write buffer of the embedded flash controller is mapped to the - * whole memory region, only the last 8 bits are decoded. - */ - p = (volatile DWORD *)&_flash_start; - for(i = 0; i < 12; i++) { - p[i+c->ext1] = c->d.asDwords[i]; - } - break; - - case CMD_FINISH_WRITE: - p = (volatile DWORD *)&_flash_start; - for(i = 0; i < 4; i++) { - p[i+60] = c->d.asDwords[i]; - } - - /* Check that the address that we are supposed to write to is within our allowed region */ - if( ((c->ext1+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (c->ext1 < start_addr) ) { - /* Disallow write */ - dont_ack = 1; - c->cmd = CMD_NACK; - UsbSendPacket(packet, len); - } else { - /* Translate address to flash page and do flash, update here for the 512k part */ - AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY | - MC_FLASH_COMMAND_PAGEN((c->ext1-(int)&_flash_start)/AT91C_IFLASH_PAGE_SIZE) | - AT91C_MC_FCMD_START_PROG; - } - while(!(AT91C_BASE_EFC0->EFC_FSR & MC_FLASH_STATUS_READY)) - ; - break; - - case CMD_HARDWARE_RESET: - USB_D_PLUS_PULLUP_OFF(); - AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST; - break; - - case CMD_START_FLASH: - if(c->ext3 == START_FLASH_MAGIC) bootrom_unlocked = 1; - else bootrom_unlocked = 0; - { - int prot_start = (int)&_bootrom_start; - int prot_end = (int)&_bootrom_end; - int allow_start = (int)&_flash_start; - int allow_end = (int)&_flash_end; - int cmd_start = c->ext1; - int cmd_end = c->ext2; - - /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected - * bootrom area. In any case they must be within the flash area. - */ - if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start))) - && (cmd_start >= allow_start) && (cmd_end <= allow_end) ) { - start_addr = cmd_start; - end_addr = cmd_end; - } else { - start_addr = end_addr = 0; - dont_ack = 1; - c->cmd = CMD_NACK; - UsbSendPacket(packet, len); - } - } - break; - - default: - Fatal(); - break; - } - - if(!dont_ack) { - c->cmd = CMD_ACK; - UsbSendPacket(packet, len); - } -} - -static void flash_mode(int externally_entered) -{ - start_addr = 0; - end_addr = 0; - bootrom_unlocked = 0; - - UsbStart(); - for(;;) { - WDT_HIT(); - - UsbPoll(TRUE); - - if(!externally_entered && !BUTTON_PRESS()) { - /* Perform a reset to leave flash mode */ - USB_D_PLUS_PULLUP_OFF(); - LED_B_ON(); - AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST; - for(;;); - } - if(externally_entered && BUTTON_PRESS()) { - /* Let the user's button press override the automatic leave */ - externally_entered = 0; - } - } -} - -extern char _osimage_entry; -void BootROM(void) -{ - //------------ - // First set up all the I/O pins; GPIOs configured directly, other ones - // just need to be assigned to the appropriate peripheral. - - // Kill all the pullups, especially the one on USB D+; leave them for - // the unused pins, though. - AT91C_BASE_PIOA->PIO_PPUDR = - GPIO_USB_PU | - GPIO_LED_A | - GPIO_LED_B | - GPIO_LED_C | - GPIO_LED_D | - GPIO_FPGA_DIN | - GPIO_FPGA_DOUT | - GPIO_FPGA_CCLK | - GPIO_FPGA_NINIT | - GPIO_FPGA_NPROGRAM | - GPIO_FPGA_DONE | - GPIO_MUXSEL_HIPKD | - GPIO_MUXSEL_HIRAW | - GPIO_MUXSEL_LOPKD | - GPIO_MUXSEL_LORAW | - GPIO_RELAY | - GPIO_NVDD_ON; - // (and add GPIO_FPGA_ON) - // These pins are outputs - AT91C_BASE_PIOA->PIO_OER = - GPIO_LED_A | - GPIO_LED_B | - GPIO_LED_C | - GPIO_LED_D | - GPIO_RELAY | - GPIO_NVDD_ON; - // PIO controls the following pins - AT91C_BASE_PIOA->PIO_PER = - GPIO_USB_PU | - GPIO_LED_A | - GPIO_LED_B | - GPIO_LED_C | - GPIO_LED_D; - - USB_D_PLUS_PULLUP_OFF(); - LED_D_OFF(); - LED_C_ON(); - LED_B_OFF(); - LED_A_OFF(); - - // if 512K FLASH part - TODO make some defines :) - if ((AT91C_BASE_DBGU->DBGU_CIDR | 0xf00) == 0xa00) { - AT91C_BASE_EFC0->EFC_FMR = - MC_FLASH_MODE_FLASH_WAIT_STATES(1) | - MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48); - AT91C_BASE_EFC1->EFC_FMR = - MC_FLASH_MODE_FLASH_WAIT_STATES(1) | - MC_FLASH_MODE_MASTER_CLK_IN_MHZ(0x48); - } else { - AT91C_BASE_EFC0->EFC_FMR = - MC_FLASH_MODE_FLASH_WAIT_STATES(0) | - MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48); - } - - // Initialize all system clocks - ConfigClocks(); - - LED_A_ON(); - - int common_area_present = 0; - switch(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_RSTTYP) { - case AT91C_RSTC_RSTTYP_WATCHDOG: - case AT91C_RSTC_RSTTYP_SOFTWARE: - case AT91C_RSTC_RSTTYP_USER: - /* In these cases the common_area in RAM should be ok, retain it if it's there */ - if(common_area.magic == COMMON_AREA_MAGIC && common_area.version == 1) { - common_area_present = 1; - } - break; - default: /* Otherwise, initialize it from scratch */ - break; - } - - if(!common_area_present){ - /* Common area not ok, initialize it */ - int i; for(i=0; i +#include "usb_cdc.h" +#include "cmd.h" + +void DbpString(char *str) { + byte_t len = 0; + while (str[len] != 0x00) + ++len; + + cmd_send(CMD_DEBUG_PRINT_STRING,len,0,0,(byte_t*)str,len); +} + +struct common_area common_area __attribute__((section(".commonarea"))); +unsigned int start_addr, end_addr, bootrom_unlocked; +extern char _bootrom_start, _bootrom_end, _flash_start, _flash_end; + +static void ConfigClocks(void) +{ + // we are using a 16 MHz crystal as the basis for everything + // slow clock runs at 32Khz typical regardless of crystal + + // enable system clock and USB clock + AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_PCK | AT91C_PMC_UDP; + + // enable the clock to the following peripherals + AT91C_BASE_PMC->PMC_PCER = + (1<PMC_MOR = + AT91C_CKGR_MOSCEN | + PMC_MAIN_OSC_STARTUP_DELAY(8); + + // wait for main oscillator to stabilize + while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS) ) {}; + + // PLL output clock frequency in range 80 - 160 MHz needs CKGR_PLL = 00 + // PLL output clock frequency in range 150 - 180 MHz needs CKGR_PLL = 10 + // PLL output is MAINCK * multiplier / divisor = 16Mhz * 12 / 2 = 96Mhz + AT91C_BASE_PMC->PMC_PLLR = + PMC_PLL_DIVISOR(2) | + PMC_PLL_COUNT_BEFORE_LOCK(0x50) | + PMC_PLL_FREQUENCY_RANGE(0) | + PMC_PLL_MULTIPLIER(12) | + PMC_PLL_USB_DIVISOR(1); + + // wait for PLL to lock + while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) ) {}; + + // we want a master clock (MCK) to be PLL clock / 2 = 96Mhz / 2 = 48Mhz + // datasheet recommends that this register is programmed in two operations + // when changing to PLL, program the prescaler first then the source + AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2; + + // wait for main clock ready signal + while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ) {}; + + // set the source to PLL + AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLL_CLK; + + // wait for main clock ready signal + while ( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) ) {}; +} + +static void Fatal(void) { + for(;;); +} + +void UsbPacketReceived(uint8_t *packet, int len) { + int i, dont_ack=0; + UsbCommand* c = (UsbCommand *)packet; + volatile uint32_t *p; + + if(len != sizeof(UsbCommand)) Fatal(); + + uint32_t arg0 = (uint32_t)c->arg[0]; + + switch(c->cmd) { + case CMD_DEVICE_INFO: { + dont_ack = 1; + arg0 = DEVICE_INFO_FLAG_BOOTROM_PRESENT | DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM | + DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH; + if(common_area.flags.osimage_present) + arg0 |= DEVICE_INFO_FLAG_OSIMAGE_PRESENT; + + cmd_send(CMD_DEVICE_INFO,arg0,1,2,0,0); + } break; + + case CMD_SETUP_WRITE: { + /* The temporary write buffer of the embedded flash controller is mapped to the + * whole memory region, only the last 8 bits are decoded. + */ + p = (volatile uint32_t *)&_flash_start; + for(i = 0; i < 12; i++) + p[i+arg0] = c->d.asDwords[i]; + } break; + + case CMD_FINISH_WRITE: { + uint32_t* flash_mem = (uint32_t*)(&_flash_start); + for ( int j=0; j<2; j++) { + for(i = 0+(64*j); i < 64+(64*j); i++) { + flash_mem[i] = c->d.asDwords[i]; + } + + uint32_t flash_address = arg0 + (0x100*j); + + /* Check that the address that we are supposed to write to is within our allowed region */ + if( ((flash_address+AT91C_IFLASH_PAGE_SIZE-1) >= end_addr) || (flash_address < start_addr) ) { + /* Disallow write */ + dont_ack = 1; + cmd_send(CMD_NACK,0,0,0,0,0); + } else { + uint32_t page_n = (flash_address - ((uint32_t)flash_mem)) / AT91C_IFLASH_PAGE_SIZE; + /* Translate address to flash page and do flash, update here for the 512k part */ + AT91C_BASE_EFC0->EFC_FCR = MC_FLASH_COMMAND_KEY | + MC_FLASH_COMMAND_PAGEN(page_n) | + AT91C_MC_FCMD_START_PROG; + } + + // Wait until flashing of page finishes + uint32_t sr; + while(!((sr = AT91C_BASE_EFC0->EFC_FSR) & AT91C_MC_FRDY)); + if(sr & (AT91C_MC_LOCKE | AT91C_MC_PROGE)) { + dont_ack = 1; + cmd_send(CMD_NACK,sr,0,0,0,0); + } + } + } break; + + case CMD_HARDWARE_RESET: { + usb_disable(); + AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST; + } break; + + case CMD_START_FLASH: { + if(c->arg[2] == START_FLASH_MAGIC) + bootrom_unlocked = 1; + else + bootrom_unlocked = 0; + + int prot_start = (int)&_bootrom_start; + int prot_end = (int)&_bootrom_end; + int allow_start = (int)&_flash_start; + int allow_end = (int)&_flash_end; + int cmd_start = c->arg[0]; + int cmd_end = c->arg[1]; + + /* Only allow command if the bootrom is unlocked, or the parameters are outside of the protected + * bootrom area. In any case they must be within the flash area. + */ + if( (bootrom_unlocked || ((cmd_start >= prot_end) || (cmd_end < prot_start))) && + (cmd_start >= allow_start) && + (cmd_end <= allow_end) ) { + start_addr = cmd_start; + end_addr = cmd_end; + } else { + start_addr = end_addr = 0; + dont_ack = 1; + cmd_send(CMD_NACK,0,0,0,0,0); + } + } break; + + default: { + Fatal(); + } break; + } + + if(!dont_ack) + cmd_send(CMD_ACK,arg0,0,0,0,0); +} + +static void flash_mode(int externally_entered) +{ + start_addr = 0; + end_addr = 0; + bootrom_unlocked = 0; + byte_t rx[sizeof(UsbCommand)]; + size_t rx_len; + + usb_enable(); + for (volatile size_t i=0; i<0x100000; i++) {}; + + for(;;) { + WDT_HIT(); + + if (usb_poll()) { + rx_len = usb_read(rx,sizeof(UsbCommand)); + if (rx_len) + UsbPacketReceived(rx,rx_len); + } + + if(!externally_entered && !BUTTON_PRESS()) { + /* Perform a reset to leave flash mode */ + usb_disable(); + LED_B_ON(); + AT91C_BASE_RSTC->RSTC_RCR = RST_CONTROL_KEY | AT91C_RSTC_PROCRST; + for(;;) + ; + } + if(externally_entered && BUTTON_PRESS()) { + /* Let the user's button press override the automatic leave */ + externally_entered = 0; + } + } +} + +extern uint32_t _osimage_entry; +void BootROM(void) +{ + //------------ + // First set up all the I/O pins; GPIOs configured directly, other ones + // just need to be assigned to the appropriate peripheral. + + // Kill all the pullups, especially the one on USB D+; leave them for + // the unused pins, though. + AT91C_BASE_PIOA->PIO_PPUDR = + GPIO_USB_PU | + GPIO_LED_A | + GPIO_LED_B | + GPIO_LED_C | + GPIO_LED_D | + GPIO_FPGA_DIN | + GPIO_FPGA_DOUT | + GPIO_FPGA_CCLK | + GPIO_FPGA_NINIT | + GPIO_FPGA_NPROGRAM | + GPIO_FPGA_DONE | + GPIO_MUXSEL_HIPKD | + GPIO_MUXSEL_HIRAW | + GPIO_MUXSEL_LOPKD | + GPIO_MUXSEL_LORAW | + GPIO_RELAY | + GPIO_NVDD_ON; + // (and add GPIO_FPGA_ON) + // These pins are outputs + AT91C_BASE_PIOA->PIO_OER = + GPIO_LED_A | + GPIO_LED_B | + GPIO_LED_C | + GPIO_LED_D | + GPIO_RELAY | + GPIO_NVDD_ON; + // PIO controls the following pins + AT91C_BASE_PIOA->PIO_PER = + GPIO_USB_PU | + GPIO_LED_A | + GPIO_LED_B | + GPIO_LED_C | + GPIO_LED_D; + +// USB_D_PLUS_PULLUP_OFF(); + usb_disable(); + LED_D_OFF(); + LED_C_ON(); + LED_B_OFF(); + LED_A_OFF(); + + AT91C_BASE_EFC0->EFC_FMR = + AT91C_MC_FWS_1FWS | + MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48); +#ifdef HAS_512_FLASH + AT91C_BASE_EFC1->EFC_FMR = + AT91C_MC_FWS_1FWS | + MC_FLASH_MODE_MASTER_CLK_IN_MHZ(48); +#endif + // Initialize all system clocks + ConfigClocks(); + + LED_A_ON(); + + int common_area_present = 0; + switch(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_RSTTYP) { + case AT91C_RSTC_RSTTYP_WATCHDOG: + case AT91C_RSTC_RSTTYP_SOFTWARE: + case AT91C_RSTC_RSTTYP_USER: + /* In these cases the common_area in RAM should be ok, retain it if it's there */ + if(common_area.magic == COMMON_AREA_MAGIC && common_area.version == 1) { + common_area_present = 1; + } + break; + default: /* Otherwise, initialize it from scratch */ + break; + } + + if(!common_area_present){ + /* Common area not ok, initialize it */ + int i; + /* Makeshift memset, no need to drag util.c into this */ + for(i=0; i