X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6eae192c415b6c4455d67f6d8e7ae8fb5c70a8e5..0691975406414516cdc977454a7965a8ca40b88d:/armsrc/iso14443a.c diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index 6216fc4a..76b82141 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -17,7 +17,7 @@ #include "cmd.h" #include "iso14443crc.h" #include "iso14443a.h" -#include "crapto1.h" +#include "crapto1/crapto1.h" #include "mifareutil.h" #include "BigBuf.h" #include "protocols.h" @@ -2329,6 +2329,7 @@ typedef struct { * FLAG_7B_UID_IN_DATA - means that there is a 7-byte UID in the data-section, we're expected to use that * FLAG_10B_UID_IN_DATA - use 10-byte UID in the data-section not finished * FLAG_NR_AR_ATTACK - means we should collect NR_AR responses for bruteforcing later + * FLAG_RANDOM_NONCE - means we should generate some pseudo-random nonce data (only allows moebius attack) *@param exitAfterNReads, exit simulation after n blocks have been read, 0 is infinite ... * (unless reader attack mode enabled then it runs util it gets enough nonces to recover all keys attmpted) */ @@ -2336,7 +2337,6 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * { int cardSTATE = MFEMUL_NOFIELD; int _UID_LEN = 0; // 4, 7, 10 - int _7BUID = 0; int vHf = 0; // in mV int res; uint32_t selTimer = 0; @@ -2360,14 +2360,13 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint8_t response[MAX_MIFARE_FRAME_SIZE]; uint8_t response_par[MAX_MIFARE_PARITY_SIZE]; - uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID + uint8_t rATQA[] = {0x04, 0x00}; // Mifare classic 1k 4BUID uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; // !!! uint8_t rUIDBCC3[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; - uint8_t rSAK[] = {0x08, 0xb6, 0xdd}; - uint8_t rSAK1[] = {0x04, 0xda, 0x17}; - uint8_t rSAK2[] = {0x04, 0xda, 0x17}; //need to look up + uint8_t rSAKfinal[]= {0x08, 0xb6, 0xdd}; // mifare 1k indicated + uint8_t rSAK1[] = {0x04, 0xda, 0x17}; // indicate UID not finished uint8_t rAUTH_NT[] = {0x01, 0x02, 0x03, 0x04}; uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00}; @@ -2375,21 +2374,26 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * //Here, we collect UID,sector,keytype,NT,AR,NR,NT2,AR2,NR2 // This will be used in the reader-only attack. - //allow collecting up to 8 sets of nonces to allow recovery of 8 keys - #define ATTACK_KEY_COUNT 8 - nonces_t ar_nr_resp[ATTACK_KEY_COUNT*2]; //*2 for 2 separate attack types + //allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys + #define ATTACK_KEY_COUNT 8 // keep same as define in cmdhfmf.c -> readerAttack() + nonces_t ar_nr_resp[ATTACK_KEY_COUNT*2]; //*2 for 2 separate attack types (nml, moebius) memset(ar_nr_resp, 0x00, sizeof(ar_nr_resp)); - uint8_t ar_nr_collected[ATTACK_KEY_COUNT*2]; + uint8_t ar_nr_collected[ATTACK_KEY_COUNT*2]; //*2 for 2nd attack type (moebius) memset(ar_nr_collected, 0x00, sizeof(ar_nr_collected)); - bool gettingMoebius = false; uint8_t nonce1_count = 0; uint8_t nonce2_count = 0; uint8_t moebius_n_count = 0; + bool gettingMoebius = false; uint8_t mM = 0; //moebius_modifier for collection storage // Authenticate response - nonce - uint32_t nonce = bytes_to_num(rAUTH_NT, 4); + uint32_t nonce; + if (flags & FLAG_RANDOM_NONCE) { + nonce = prand(); + } else { + nonce = bytes_to_num(rAUTH_NT, 4); + } //-- Determine the UID // Can be set from emulator memory, incoming data @@ -2404,7 +2408,6 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * // 7B uid comes from data-portion of packet memcpy(&rUIDBCC1[1],datain,3); memcpy(rUIDBCC2, datain+3, 4); - _7BUID = true; _UID_LEN = 7; } else if (flags & FLAG_10B_UID_IN_DATA) { memcpy(&rUIDBCC1[1], datain, 3); @@ -2414,8 +2417,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } else { // get UID from emul memory - guess at length emlGetMemBt(receivedCmd, 7, 1); - _7BUID = !(receivedCmd[0] == 0x00); - if (!_7BUID) { // ---------- 4BUID + if (receivedCmd[0] == 0x00) { // ---------- 4BUID emlGetMemBt(rUIDBCC1, 0, 4); _UID_LEN = 4; } else { // ---------- 7BUID @@ -2504,7 +2506,8 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * set_tracing(TRUE); bool finished = FALSE; - while (!BUTTON_PRESS() && !finished && !usb_poll_validate_length()) { + bool button_pushed = BUTTON_PRESS(); + while (!button_pushed && !finished && !usb_poll_validate_length()) { WDT_HIT(); // find reader field @@ -2514,7 +2517,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * cardSTATE_TO_IDLE(); LED_A_ON(); } - } + } if (cardSTATE == MFEMUL_NOFIELD) continue; //Now, get data @@ -2526,7 +2529,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } else if (res == 1) { break; //return value 1 means button press } - + // REQ or WUP request in ANY state and WUP in HALTED state if (len == 1 && ((receivedCmd[0] == ISO14443A_CMD_REQA && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == ISO14443A_CMD_WUPA)) { selTimer = GetTickCount(); @@ -2538,6 +2541,9 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * LED_C_OFF(); crypto1_destroy(pcs); cardAUTHKEY = 0xff; + if (flags & FLAG_RANDOM_NONCE) { + nonce = prand(); + } continue; } @@ -2549,27 +2555,25 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * break; } case MFEMUL_SELECT1:{ - // select all - if (len == 2 && (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x20)) { + // select all - 0x93 0x20 + if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && receivedCmd[1] == 0x20)) { if (MF_DBGLEVEL >= 4) Dbprintf("SELECT ALL received"); EmSendCmd(rUIDBCC1, sizeof(rUIDBCC1)); break; } - if (MF_DBGLEVEL >= 4 && len == 9 && receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 ) - { - Dbprintf("SELECT %02x%02x%02x%02x received",receivedCmd[2],receivedCmd[3],receivedCmd[4],receivedCmd[5]); - } - // select card - // check correct sak values... (marshmellow) - if (len == 9 && - (receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) { + // select card - 0x93 0x70 ... + if (len == 9 && + (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) { + if (MF_DBGLEVEL >= 4) + Dbprintf("SELECT %02x%02x%02x%02x received",receivedCmd[2],receivedCmd[3],receivedCmd[4],receivedCmd[5]); + switch(_UID_LEN) { case 4: cardSTATE = MFEMUL_WORK; LED_B_ON(); if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol1 time: %d", GetTickCount() - selTimer); - EmSendCmd(rSAK, sizeof(rSAK)); + EmSendCmd(rSAKfinal, sizeof(rSAKfinal)); break; case 7: cardSTATE = MFEMUL_SELECT2; @@ -2577,7 +2581,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * break; case 10: cardSTATE = MFEMUL_SELECT2; - EmSendCmd(rSAK2, sizeof(rSAK2)); + EmSendCmd(rSAK1, sizeof(rSAK1)); break; default:break; } @@ -2591,16 +2595,18 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); break; } + // select all cl3 - 0x97 0x20 if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && receivedCmd[1] == 0x20)) { EmSendCmd(rUIDBCC3, sizeof(rUIDBCC3)); break; } + // select card cl3 - 0x97 0x70 if (len == 9 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC3, 4) == 0) ) { - EmSendCmd(rSAK2, sizeof(rSAK2)); + EmSendCmd(rSAKfinal, sizeof(rSAKfinal)); cardSTATE = MFEMUL_WORK; LED_B_ON(); if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol3 time: %d", GetTickCount() - selTimer); @@ -2610,8 +2616,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * break; } case MFEMUL_AUTH1:{ - if( len != 8) - { + if( len != 8) { cardSTATE_TO_IDLE(); LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); break; @@ -2620,7 +2625,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint32_t nr = bytes_to_num(receivedCmd, 4); uint32_t ar = bytes_to_num(&receivedCmd[4], 4); - //Collect AR/NR per keytype & sector + // Collect AR/NR per keytype & sector if(flags & FLAG_NR_AR_ATTACK) { for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { if ( ar_nr_collected[i+mM]==0 || ((cardAUTHSC == ar_nr_resp[i+mM].sector) && (cardAUTHKEY == ar_nr_resp[i+mM].keytype) && (ar_nr_collected[i+mM] > 0)) ) { @@ -2638,7 +2643,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * ar_nr_resp[i+mM].nr = nr; ar_nr_resp[i+mM].ar = ar; nonce1_count++; - //add this nonce to first moebius nonce + // add this nonce to first moebius nonce ar_nr_resp[i+ATTACK_KEY_COUNT].cuid = cuid; ar_nr_resp[i+ATTACK_KEY_COUNT].sector = cardAUTHSC; ar_nr_resp[i+ATTACK_KEY_COUNT].keytype = cardAUTHKEY; @@ -2646,33 +2651,35 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * ar_nr_resp[i+ATTACK_KEY_COUNT].nr = nr; ar_nr_resp[i+ATTACK_KEY_COUNT].ar = ar; ar_nr_collected[i+ATTACK_KEY_COUNT]++; - } else { //second nonce collect (std and moebius) + } else { // second nonce collect (std and moebius) ar_nr_resp[i+mM].nonce2 = nonce; ar_nr_resp[i+mM].nr2 = nr; ar_nr_resp[i+mM].ar2 = ar; if (!gettingMoebius) { nonce2_count++; - //check if this was the last second nonce we need for std attack + // check if this was the last second nonce we need for std attack if ( nonce2_count == nonce1_count ) { - //done collecting std test switch to moebius - //finish incrementing last sample + // done collecting std test switch to moebius + // first finish incrementing last sample ar_nr_collected[i+mM]++; - //switch to moebius collection + // switch to moebius collection gettingMoebius = true; mM = ATTACK_KEY_COUNT; - nonce = nonce*7; + if (flags & FLAG_RANDOM_NONCE) { + nonce = prand(); + } else { + nonce = nonce*7; + } break; } } else { moebius_n_count++; - //if we've collected all the nonces we need - finish. + // if we've collected all the nonces we need - finish. if (nonce1_count == moebius_n_count) finished = true; } } ar_nr_collected[i+mM]++; } - } else { //already collected 2 nonces for sector - dump out - //finished = true; } // we found right spot for this nonce stop looking break; @@ -2715,24 +2722,25 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * if (!len) { LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); break; - } - if (len == 2 && (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x20)) { + } + // select all cl2 - 0x95 0x20 + if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && receivedCmd[1] == 0x20)) { EmSendCmd(rUIDBCC2, sizeof(rUIDBCC2)); break; } - // select 2 card + // select cl2 card - 0x95 0x70 xxxxxxxxxxxx if (len == 9 && - (receivedCmd[0] == 0x95 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0)) { - //which sak now? (marshmellow) - EmSendCmd(rSAK, sizeof(rSAK)); + (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0)) { switch(_UID_LEN) { case 7: + EmSendCmd(rSAKfinal, sizeof(rSAKfinal)); cardSTATE = MFEMUL_WORK; LED_B_ON(); if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol2 time: %d", GetTickCount() - selTimer); break; case 10: + EmSendCmd(rSAK1, sizeof(rSAK1)); cardSTATE = MFEMUL_SELECT3; break; default:break; @@ -2956,13 +2964,13 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * break; } } + button_pushed = BUTTON_PRESS(); } FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff(); - if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1) - { + if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1) { for ( uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { if (ar_nr_collected[i] == 2) { Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen()); - if(flags & FLAG_INTERACTIVE)// Interactive mode flag, means we need to send ACK - { + if(flags & FLAG_INTERACTIVE) { // Interactive mode flag, means we need to send ACK //Send the collected ar_nr in the response - cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_resp,sizeof(ar_nr_resp)); + cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,button_pushed,0,&ar_nr_resp,sizeof(ar_nr_resp)); } - } - //----------------------------------------------------------------------------- // MIFARE sniffer. //