X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/6f5dd6010ec48f56724029a414db1ee3594ab810..7496d8d822a4a3855e6ab6d1d4cb3fb947517beb:/client/proxmark3.c

diff --git a/client/proxmark3.c b/client/proxmark3.c
index 3b30b3cb..bf0f3817 100644
--- a/client/proxmark3.c
+++ b/client/proxmark3.c
@@ -47,7 +47,11 @@ void SendCommand(UsbCommand *c) {
       PrintAndLog("Sending bytes to proxmark failed - offline");
       return;
     }
-
+  /**
+	The while-loop below causes hangups at times, when the pm3 unit is unresponsive
+	or disconnected. The main console thread is alive, but comm thread just spins here.
+	Not good.../holiman
+	**/
   while(txcmd_pending);
   txcmd = *c;
   txcmd_pending = true;
@@ -215,17 +219,14 @@ static void *main_loop(void *targ) {
 //  printf("\n");
 //}
 
-static void dumpAllHelp()
+static void dumpAllHelp(int markdown)
 {
-  offline=3;
-  printf("\n# Proxmark3 command dump\n\n");
-  printf("Some commands are available only if a Proxmark is actually connected.\n");
+  printf("\n%sProxmark3 command dump%s\n\n",markdown?"# ":"",markdown?"":"\n======================");
+  printf("Some commands are available only if a Proxmark is actually connected.%s\n",markdown?"  ":"");
   printf("Check column \"offline\" for their availability.\n");
   printf("\n");
   command_t *cmds = getTopLevelCommandTable();
-
-  dumpCommandsRecursive(cmds);
-
+  dumpCommandsRecursive(cmds, markdown);
 }
 
 int main(int argc, char* argv[]) {
@@ -234,17 +235,22 @@ int main(int argc, char* argv[]) {
 	if (argc < 2) {
 		printf("syntax: %s <port>\n\n",argv[0]);
 		printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
-    printf("help:   %s -h\n\n", argv[0]);
-    printf("\tDump all interactive help at once\n");
+		printf("help:   %s -h\n\n", argv[0]);
+		printf("\tDump all interactive help at once\n");
+		printf("markdown:   %s -m\n\n", argv[0]);
+		printf("\tDump all interactive help at once in markdown syntax\n");
 		return 1;
 	}
-  
-  if (strcmp(argv[1], "-h") == 0) {
-    printf("syntax: %s <port>\n\n",argv[0]);
-    printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
-    dumpAllHelp();
-    return 0;
-  }  
+	if (strcmp(argv[1], "-h") == 0) {
+		printf("syntax: %s <port>\n\n",argv[0]);
+		printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
+		dumpAllHelp(0);
+		return 0;
+	}
+	if (strcmp(argv[1], "-m") == 0) {
+		dumpAllHelp(1);
+		return 0;
+	}
 	// Make sure to initialize
 	struct main_loop_arg marg = {
 		.usb_present = 0,