X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/7b40affb6f7087e116bccff352923834dcdc8d46..6a09bea4271573b36800126ca407bfe2d7214df2:/client/cmdlft55xx.c diff --git a/client/cmdlft55xx.c b/client/cmdlft55xx.c index b303aced..1cadfe7a 100644 --- a/client/cmdlft55xx.c +++ b/client/cmdlft55xx.c @@ -10,6 +10,7 @@ #include #include #include +#include #include "proxmark3.h" #include "ui.h" #include "graph.h" @@ -22,33 +23,28 @@ #include "data.h" #include "lfdemod.h" #include "../common/crc.h" +#include "../common/iso14443crc.h" +#include "cmdhf14a.h" -#define LF_TRACE_BUFF_SIZE 20000 // 32 x 32 x 10 (32 bit times numofblock (7), times clock skip..) -#define LF_BITSSTREAM_LEN 1000 // more then 1000 bits shouldn't happend.. 8block * 4 bytes * 8bits = +#define CONFIGURATION_BLOCK 0x00 +#define TRACE_BLOCK 0x01 -// 0 = FSK -// 1 = ASK -// 2 = PSK -// 4 = NZR (direct) -typedef struct { - uint8_t modulation; - bool inversed; - uint32_t block0; -} t55xx_conf_block_t; - -// Default configuration: FSK, not inversed. -t55xx_conf_block_t config = { .modulation = 2, .inversed = FALSE, .block0 = 0x00}; +// Default configuration +t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00}; int usage_t55xx_config(){ - PrintAndLog("Usage: lf t55xx config [d ] [i 1]"); + PrintAndLog("Usage: lf t55xx config [d ] [i 1] [o ]"); PrintAndLog("Options: "); PrintAndLog(" h This help"); - PrintAndLog(" d Set demodulation FSK / ASK / PSK / NZ / Biphase"); - PrintAndLog(" i [1] Inverse data signal, defaults to normal"); + PrintAndLog(" b <8|16|32|40|50|64|100|128> Set bitrate"); + PrintAndLog(" d Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A"); + PrintAndLog(" i [1] Invert data signal, defaults to normal"); + PrintAndLog(" o [offset] Set offset, where data should start decode in bitstream"); PrintAndLog(""); PrintAndLog("Examples:"); - PrintAndLog(" lf t55xx config d FSK - FSK demodulation"); - PrintAndLog(" lf t55xx config d FSK i 1 - FSK demodulation, inverse data"); + PrintAndLog(" lf t55xx config d FSK - FSK demodulation"); + PrintAndLog(" lf t55xx config d FSK i 1 - FSK demodulation, inverse data"); + PrintAndLog(" lf t55xx config d FSK i 1 o 3 - FSK demodulation, inverse data, offset=3,start from position 3 to decode data"); PrintAndLog(""); return 0; } @@ -65,13 +61,13 @@ int usage_t55xx_read(){ } int usage_t55xx_write(){ PrintAndLog("Usage: lf t55xx wr [password]"); - PrintAndLog(" , block number to read. Between 0-7"); + PrintAndLog(" , block number to write. Between 0-7"); PrintAndLog(" , 4 bytes of data to write (8 hex characters)"); PrintAndLog(" [password], OPTIONAL password 4bytes (8 hex characters)"); PrintAndLog(""); PrintAndLog("Examples:"); - PrintAndLog(" lf t55xx wd 3 11223344 - write 11223344 to block 3"); - PrintAndLog(" lf t55xx wd 3 11223344 feedbeef - write 11223344 to block 3 password feedbeef"); + PrintAndLog(" lf t55xx wr 3 11223344 - write 11223344 to block 3"); + PrintAndLog(" lf t55xx wr 3 11223344 feedbeef - write 11223344 to block 3 password feedbeef"); PrintAndLog(""); return 0; } @@ -117,42 +113,84 @@ int usage_t55xx_detect(){ static int CmdHelp(const char *Cmd); -int CmdT55xxSetConfig(const char *Cmd){ +int CmdT55xxSetConfig(const char *Cmd) { - int len; - bool inverse; + uint8_t offset = 0; bool errors = FALSE; uint8_t cmdp = 0; - char modulation[4] = {0x00}; - + char modulation[5] = {0x00}; + char tmp = 0x00; + uint8_t bitRate = 0; + uint8_t rates[9] = {8,16,32,40,50,64,100,128,0}; while(param_getchar(Cmd, cmdp) != 0x00 && !errors) { - switch(param_getchar(Cmd, cmdp)) + tmp = param_getchar(Cmd, cmdp); + switch(tmp) { case 'h': case 'H': return usage_t55xx_config(); + case 'b': + errors |= param_getdec(Cmd, cmdp+1, &bitRate); + if ( !errors){ + uint8_t i = 0; + for (; i < 9; i++){ + if (rates[i]==bitRate) { + config.bitrate = i; + break; + } + } + if (i==9) errors = TRUE; + } + cmdp+=2; + break; case 'd': - len = param_getstr(Cmd, cmdp+1, modulation); - cmdp+= len+1; - //FSK|ASK|PSK|NZ|BI - if ( strcmp(modulation, "FSK" ) == 0) - len = 1; - else if ( strcmp(modulation, "ASK" ) == 0) - len = 2; - else if ( strcmp(modulation, "PSK" ) == 0) - len = 3; - else if ( strcmp(modulation, "NZ" ) == 0) - len = 4; - else if ( strcmp(modulation, "BI" ) == 0) - len = 5; - else { + param_getstr(Cmd, cmdp+1, modulation); + cmdp += 2; + + if ( strcmp(modulation, "FSK" ) == 0) { + config.modulation = DEMOD_FSK; + } else if ( strcmp(modulation, "FSK1" ) == 0) { + config.modulation = DEMOD_FSK1; + config.inverted=1; + } else if ( strcmp(modulation, "FSK1a" ) == 0) { + config.modulation = DEMOD_FSK1a; + config.inverted=0; + } else if ( strcmp(modulation, "FSK2" ) == 0) { + config.modulation = DEMOD_FSK2; + config.inverted=0; + } else if ( strcmp(modulation, "FSK2a" ) == 0) { + config.modulation = DEMOD_FSK2a; + config.inverted=1; + } else if ( strcmp(modulation, "ASK" ) == 0) { + config.modulation = DEMOD_ASK; + } else if ( strcmp(modulation, "NRZ" ) == 0) { + config.modulation = DEMOD_NRZ; + } else if ( strcmp(modulation, "PSK1" ) == 0) { + config.modulation = DEMOD_PSK1; + } else if ( strcmp(modulation, "PSK2" ) == 0) { + config.modulation = DEMOD_PSK2; + } else if ( strcmp(modulation, "PSK3" ) == 0) { + config.modulation = DEMOD_PSK3; + } else if ( strcmp(modulation, "BIa" ) == 0) { + config.modulation = DEMOD_BIa; + config.inverted=1; + } else if ( strcmp(modulation, "BI" ) == 0) { + config.modulation = DEMOD_BI; + config.inverted=0; + } else { PrintAndLog("Unknown modulation '%s'", modulation); errors = TRUE; } break; case 'i': - inverse = param_getchar(Cmd,cmdp+1) == '1'; + config.inverted = param_getchar(Cmd,cmdp+1) == '1'; + cmdp+=2; + break; + case 'o': + errors |= param_getdec(Cmd, cmdp+1, &offset); + if ( !errors ) + config.offset = offset; cmdp+=2; break; default: @@ -161,37 +199,31 @@ int CmdT55xxSetConfig(const char *Cmd){ break; } } + // No args if (cmdp == 0) { - PrintAndLog("Modulation: %d", config.modulation); - PrintAndLog("Invert : %d", config.inversed); - PrintAndLog("Block0 : %08X", config.block0); + printConfiguration( config ); return 0; } //Validations if (errors) return usage_t55xx_config(); - - config.modulation = len; - config.inversed = inverse; - config.block0 = 0; + + config.block0 = 0; + printConfiguration ( config ); return 0; } -int CmdT55xxReadBlock(const char *Cmd) -{ +int CmdT55xxReadBlock(const char *Cmd) { int block = -1; int password = 0xFFFFFFFF; //default to blank Block 7 char cmdp = param_getchar(Cmd, 0); - if (cmdp == 'h' || cmdp == 'H') - return usage_t55xx_read(); + if (cmdp == 'h' || cmdp == 'H') return usage_t55xx_read(); int res = sscanf(Cmd, "%d %x", &block, &password); - if ( res < 1 || res > 2 ) - return usage_t55xx_read(); - + if ( res < 1 || res > 2 ) return usage_t55xx_read(); if ((block < 0) | (block > 7)) { PrintAndLog("Block must be between 0 and 7"); @@ -207,6 +239,7 @@ int CmdT55xxReadBlock(const char *Cmd) c.d.asBytes[0] = 0x1; } + clearCommandBuffer(); SendCommand(&c); if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { PrintAndLog("command execution time out"); @@ -217,208 +250,399 @@ int CmdT55xxReadBlock(const char *Cmd) GetFromBigBuf(got,sizeof(got),0); WaitForResponse(CMD_ACK,NULL); setGraphBuf(got, 12000); - - DecodeT55xxBlock(); - printT55xxBlock(""); + DemodBufferLen=0; + if (!DecodeT55xxBlock()) return 3; + char blk[10]={0}; + sprintf(blk,"%d", block); + printT55xxBlock(blk); return 0; } -void DecodeT55xxBlock(){ +bool DecodeT55xxBlock(){ - char buf[6] = {0x00}; + char buf[30] = {0x00}; char *cmdStr = buf; + int ans = 0; + uint8_t bitRate[8] = {8,16,32,40,50,64,100,128}; + DemodBufferLen = 0x00; - // use the configuration + //trim 1/2 a clock from beginning + //snprintf(cmdStr, sizeof(buf),"%d", bitRate[config.bitrate]/2 ); + //CmdLtrim(cmdStr); switch( config.modulation ){ - case 1: - sprintf(cmdStr,"0 %d", config.inversed ); - FSKrawDemod(cmdStr, FALSE); + case DEMOD_FSK: + snprintf(cmdStr, sizeof(buf),"%d %d", bitRate[config.bitrate], config.inverted ); + ans = FSKrawDemod(cmdStr, FALSE); break; - case 2: - sprintf(cmdStr,"0 %d 1", config.inversed ); - ASKmanDemod(cmdStr, FALSE, FALSE); - PrintAndLog("ice"); + case DEMOD_FSK1: + case DEMOD_FSK1a: + snprintf(cmdStr, sizeof(buf),"%d %d 8 5", bitRate[config.bitrate], config.inverted ); + ans = FSKrawDemod(cmdStr, FALSE); break; - case 3: - sprintf(cmdStr,"0 %d 1", config.inversed ); - PSKDemod(cmdStr, FALSE); + case DEMOD_FSK2: + case DEMOD_FSK2a: + snprintf(cmdStr, sizeof(buf),"%d %d 10 8", bitRate[config.bitrate], config.inverted ); + ans = FSKrawDemod(cmdStr, FALSE); break; - case 4: - sprintf(cmdStr,"0 %d 1", config.inversed ); - NRZrawDemod(cmdStr, FALSE); + case DEMOD_ASK: + snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted ); + ans = ASKDemod(cmdStr, FALSE, FALSE, 1); break; - case 5: - //BiphaseRawDecode("0",FALSE); + case DEMOD_PSK1: + snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted ); + ans = PSKDemod(cmdStr, FALSE); + break; + case DEMOD_PSK2: //inverted won't affect this + case DEMOD_PSK3: //not fully implemented + snprintf(cmdStr, sizeof(buf),"%d 0 1", bitRate[config.bitrate] ); + ans = PSKDemod(cmdStr, FALSE); + psk1TOpsk2(DemodBuffer, DemodBufferLen); + break; + case DEMOD_NRZ: + snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted ); + ans = NRZrawDemod(cmdStr, FALSE); + break; + case DEMOD_BI: + case DEMOD_BIa: + snprintf(cmdStr, sizeof(buf),"0 %d %d 0", bitRate[config.bitrate], config.inverted ); + ans = ASKbiphaseDemod(cmdStr, FALSE); break; default: - return; + return FALSE; } + return (bool) ans; } int CmdT55xxDetect(const char *Cmd){ + char cmdp = param_getchar(Cmd, 0); - if (cmdp == 'h' || cmdp == 'H') + if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_detect(); - // read block 0, Page 0. Configuration. - UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, 0, 0}}; - c.d.asBytes[0] = 0x0; - - //Password mode - // if ( res == 2 ) { - // c.arg[2] = password; - // c.d.asBytes[0] = 0x1; - // } + if (strlen(Cmd)==0) + AquireData( CONFIGURATION_BLOCK ); - SendCommand(&c); - if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { - PrintAndLog("command execution time out"); - return FALSE; - } - - uint8_t got[12000]; - GetFromBigBuf(got,sizeof(got),0); - WaitForResponse(CMD_ACK,NULL); - setGraphBuf(got, 12000); - - if ( !tryDetectModulation() ){ + if ( !tryDetectModulation() ) PrintAndLog("Could not detect modulation automatically. Try setting it manually with \'lf t55xx config\'"); - } + return 0; } // detect configuration? bool tryDetectModulation(){ - + //char cmdStr[8] = {0}; uint8_t hits = 0; - t55xx_conf_block_t tests[10]; - + t55xx_conf_block_t tests[15]; + int bitRate=0; + uint8_t fc1 = 0, fc2 = 0, clk=0; + save_restoreGB(1); if (GetFskClock("", FALSE, FALSE)){ - if ( FSKrawDemod("0 0", FALSE) && test()){ - tests[hits].modulation = 1; - tests[hits].inversed = 0; + fskClocks(&fc1, &fc2, &clk, FALSE); + //sprintf(cmdStr,"%d", clk/2); + //CmdLtrim(cmdStr); + if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)){ + tests[hits].modulation = DEMOD_FSK; + if (fc1==8 && fc2 == 5) + tests[hits].modulation = DEMOD_FSK1a; + else if (fc1==10 && fc2 == 8) + tests[hits].modulation = DEMOD_FSK2; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; } - if ( FSKrawDemod("0 1", FALSE) && test()) { - tests[hits].modulation = 1; - tests[hits].inversed = 1; + if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_FSK; + if (fc1 == 8 && fc2 == 5) + tests[hits].modulation = DEMOD_FSK1; + else if (fc1 == 10 && fc2 == 8) + tests[hits].modulation = DEMOD_FSK2a; + + tests[hits].bitrate = bitRate; + tests[hits].inverted = TRUE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); ++hits; + } + } else { + clk = GetAskClock("", FALSE, FALSE); + if (clk>0) { + //sprintf(cmdStr,"%d", clk/2); + //CmdLtrim(cmdStr); + if ( ASKDemod("0 0 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_ASK; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; } - } else { - if ( ASKmanDemod("0 0 1", FALSE, FALSE) && test()) { - tests[hits].modulation = 2; - tests[hits].inversed = 0; - ++hits; + if ( ASKDemod("0 1 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_ASK; + tests[hits].bitrate = bitRate; + tests[hits].inverted = TRUE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; } - - if ( ASKmanDemod("0 1 1", FALSE, FALSE) && test()) { - tests[hits].modulation = 2; - tests[hits].inversed = 1; - ++hits; + if ( ASKbiphaseDemod("0 0 0 0", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate) ) { + tests[hits].modulation = DEMOD_BI; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; + } + if ( ASKbiphaseDemod("0 0 1 0", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate) ) { + tests[hits].modulation = DEMOD_BIa; + tests[hits].bitrate = bitRate; + tests[hits].inverted = TRUE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; } - - if ( NRZrawDemod("0 0 1", FALSE) && test()) { - tests[hits].modulation = 3; - tests[hits].inversed = 0; - ++hits; } + //undo trim from ask + save_restoreGB(0); + clk = GetNrzClock("", FALSE, FALSE); + if (clk>0) { + //sprintf(cmdStr,"%d", clk/2); + //CmdLtrim(cmdStr); + if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_NRZ; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; + } - if ( NRZrawDemod("0 1 1", FALSE) && test()) { - tests[hits].modulation = 3; - tests[hits].inversed = 1; - ++hits; + if ( NRZrawDemod("0 1 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_NRZ; + tests[hits].bitrate = bitRate; + tests[hits].inverted = TRUE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; } - - if ( PSKDemod("0 0 1", FALSE) && test()) { - tests[hits].modulation = 4; - tests[hits].inversed = 0; - ++hits; } - if ( PSKDemod("0 1 1", FALSE) && test()) { - tests[++hits].modulation = 4; - tests[hits].inversed = 1; - ++hits; + //undo trim from nrz + save_restoreGB(0); + clk = GetPskClock("", FALSE, FALSE); + if (clk>0) { + //PrintAndLog("clk %d",clk); + //sprintf(cmdStr,"%d", clk/2); + //CmdLtrim(cmdStr); + if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_PSK1; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; + } + if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) { + tests[hits].modulation = DEMOD_PSK1; + tests[hits].bitrate = bitRate; + tests[hits].inverted = TRUE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; + } + // PSK2 - needs a call to psk1TOpsk2. + if ( PSKDemod("0 0 1", FALSE)) { + psk1TOpsk2(DemodBuffer, DemodBufferLen); + if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate)){ + tests[hits].modulation = DEMOD_PSK2; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; + } + } // inverse waves does not affect this demod + // PSK3 - needs a call to psk1TOpsk2. + if ( PSKDemod("0 0 1", FALSE)) { + psk1TOpsk2(DemodBuffer, DemodBufferLen); + if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate)){ + tests[hits].modulation = DEMOD_PSK3; + tests[hits].bitrate = bitRate; + tests[hits].inverted = FALSE; + tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer); + ++hits; + } + } // inverse waves does not affect this demod } - //PSK2? - // if (!BiphaseRawDecode("0",FALSE) && test()) { - // tests[++hits].modulation = 5; - // tests[hits].inversed = 0; - //} - // if (!BiphaseRawDecode("1",FALSE) && test()) { - // tests[++hits].modulation = 5; - // tests[hits].inversed = 1; - // } } if ( hits == 1) { - PrintAndLog("Modulation: %d Inverse: %d", tests[0].modulation, tests[0].inversed); config.modulation = tests[0].modulation; - config.inversed = tests[0].inversed; + config.bitrate = tests[0].bitrate; + config.inverted = tests[0].inverted; + config.offset = tests[0].offset; + config.block0 = tests[0].block0; + printConfiguration( config ); return TRUE; } if ( hits > 1) { PrintAndLog("Found [%d] possible matches for modulation.",hits); for(int i=0; i 3 && modread < 8) return TRUE; + break; + case DEMOD_ASK: + if (modread == DEMOD_ASK) return TRUE; + break; + case DEMOD_PSK1: + if (modread == DEMOD_PSK1) return TRUE; + break; + case DEMOD_PSK2: + if (modread == DEMOD_PSK2) return TRUE; + break; + case DEMOD_PSK3: + if (modread == DEMOD_PSK3) return TRUE; + break; + case DEMOD_NRZ: + if (modread == DEMOD_NRZ) return TRUE; + break; + case DEMOD_BI: + if (modread == DEMOD_BI) return TRUE; + break; + case DEMOD_BIa: + if (modread == DEMOD_BIa) return TRUE; + break; + default: + return FALSE; + } + return FALSE; +} - if ( !DemodBufferLen) - return false; - - uint8_t si = 1; - uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; - uint8_t resv = PackBits(si, 7, DemodBuffer); si += 7+3; - uint8_t extend = PackBits(si, 1, DemodBuffer); si += 1; +bool testBitRate(uint8_t readRate, uint8_t mod){ + uint8_t expected[8] = {8, 16, 32, 40, 50, 64, 100, 128}; + uint8_t detRate = 0; + switch( mod ){ + case DEMOD_FSK: + case DEMOD_FSK1: + case DEMOD_FSK1a: + case DEMOD_FSK2: + case DEMOD_FSK2a: + detRate = GetFskClock("",FALSE, FALSE); + if (expected[readRate] == detRate) + return TRUE; + break; + case DEMOD_ASK: + case DEMOD_BI: + case DEMOD_BIa: + detRate = GetAskClock("",FALSE, FALSE); + if (expected[readRate] == detRate) + return TRUE; + break; + case DEMOD_PSK1: + case DEMOD_PSK2: + case DEMOD_PSK3: + detRate = GetPskClock("",FALSE, FALSE); + if (expected[readRate] == detRate) + return TRUE; + break; + case DEMOD_NRZ: + detRate = GetNrzClock("",FALSE, FALSE); + if (expected[readRate] == detRate) + return TRUE; + break; + default: + return FALSE; + } + return FALSE; +} - //PrintAndLog("test: %X %X %X ", safer, resv, extend); - - // 2nibble must be zeroed. - if ( resv > 0x00) return FALSE; +bool test(uint8_t mode, uint8_t *offset, int *fndBitRate){ + + if ( DemodBufferLen < 64 ) return FALSE; + uint8_t si = 0; + for (uint8_t idx = 0; idx < 64; idx++){ + si = idx; + if ( PackBits(si, 32, DemodBuffer) == 0x00 ) continue; - if ( safer == 0x6 || safer == 0x9){ - if ( extend == 0x00) - return TRUE; + uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key + uint8_t resv = PackBits(si, 4, DemodBuffer); si += 4; //was 7 & +=7+3 //should be only 4 bits if extended mode + // 2nibble must be zeroed. + // moved test to here, since this gets most faults first. + if ( resv > 0x00) continue; + + uint8_t xtRate = PackBits(si, 3, DemodBuffer); si += 3; //extended mode part of rate + int bitRate = PackBits(si, 3, DemodBuffer); si += 3; //bit rate + if (bitRate > 7) continue; + uint8_t extend = PackBits(si, 1, DemodBuffer); si += 1; //bit 15 extended mode + uint8_t modread = PackBits(si, 5, DemodBuffer); si += 5+2+1; + //uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2+1; //could check psk cr + uint8_t nml01 = PackBits(si, 1, DemodBuffer); si += 1+5; //bit 24, 30, 31 could be tested for 0 if not extended mode + uint8_t nml02 = PackBits(si, 2, DemodBuffer); si += 2; + + //if extended mode + bool extMode =( (safer == 0x6 || safer == 0x9) && extend) ? TRUE : FALSE; + + if (!extMode){ + if (nml01 || nml02 || xtRate) continue; + } + //test modulation + if (!testModulation(mode, modread)) continue; + if (!testBitRate(bitRate, mode)) continue; + *fndBitRate = bitRate; + *offset = idx; + return TRUE; } - if ( resv== 0x00) return TRUE; return FALSE; } -void printT55xxBlock(const char *demodStr){ +void printT55xxBlock(const char *blockNum){ + uint8_t i = config.offset; + uint8_t endpos = 32 + i; uint32_t blockData = 0; - uint8_t bits[MAX_GRAPH_TRACE_LEN] = {0x00}; - - if ( !DemodBufferLen) + uint8_t bits[64] = {0x00}; + + if ( !DemodBufferLen) return; + + if ( endpos > DemodBufferLen){ + PrintAndLog("The configured offset %d is too big. Possible offset: %d)", i, DemodBufferLen-32); return; + } + + for (; i < endpos; ++i) + bits[i - config.offset]=DemodBuffer[i]; + + blockData = PackBits(0, 32, bits); + PrintAndLog("[%s] 0x%08X %s", blockNum, blockData, sprint_bin(bits,32)); +} + +int special(const char *Cmd) { + uint32_t blockData = 0; + uint8_t bits[32] = {0x00}; + + PrintAndLog("[OFFSET] [DATA] [BINARY]"); + PrintAndLog("----------------------------------------------------"); + int i,j = 0; + for (; j < 64; ++j){ + + for (i = 0; i < 32; ++i) + bits[i]=DemodBuffer[j+i]; - int i =0; - for (;i 7) { - PrintAndLog("Block must be between 0 and 7"); + PrintAndLog("Block number must be between 0 and 7"); return 1; } + UsbCommand resp; UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}}; c.d.asBytes[0] = 0x0; - PrintAndLog("Writing to T55x7"); - PrintAndLog("block : %d", block); - PrintAndLog("data : 0x%08X", data); + PrintAndLog("Writing to block: %d data : 0x%08X", block, data); //Password mode if (res == 3) { @@ -456,7 +679,12 @@ int CmdT55xxWriteBlock(const char *Cmd) c.d.asBytes[0] = 0x1; PrintAndLog("pwd : 0x%08X", password); } + clearCommandBuffer(); SendCommand(&c); + if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){ + PrintAndLog("Error occurred, device did not ACK write operation. (May be due to old firmware)"); + return -1; + } return 0; } @@ -467,61 +695,61 @@ int CmdT55xxReadTrace(const char *Cmd) if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_trace(); - if ( strlen(Cmd)==0){ + if (strlen(Cmd)==0) + AquireData( TRACE_BLOCK ); - UsbCommand c = {CMD_T55XX_READ_TRACE, {0, 0, 0}}; - SendCommand(&c); - if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { - PrintAndLog("command execution time out"); - return 1; - } + if (!DecodeT55xxBlock()) return 1; - uint8_t got[12000]; - GetFromBigBuf(got,sizeof(got),0); - WaitForResponse(CMD_ACK,NULL); - setGraphBuf(got, 12000); - } - - DecodeT55xxBlock(); - - if ( !DemodBufferLen) - return 2; + if ( !DemodBufferLen) return 1; RepaintGraphWindow(); - - uint8_t si = 5; + uint8_t repeat = 0; + if (config.offset > 5) + repeat = 32; + uint8_t si = config.offset+repeat; uint32_t bl0 = PackBits(si, 32, DemodBuffer); uint32_t bl1 = PackBits(si+32, 32, DemodBuffer); - uint32_t acl = PackBits(si, 8, DemodBuffer); si += 8; - uint32_t mfc = PackBits(si, 8, DemodBuffer); si += 8; - uint32_t cid = PackBits(si, 5, DemodBuffer); si += 5; - uint32_t icr = PackBits(si, 3, DemodBuffer); si += 3; - uint32_t year = PackBits(si, 4, DemodBuffer); si += 4; - uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2; - uint32_t lotid = PackBits(si, 12, DemodBuffer); si += 12; - uint32_t wafer = PackBits(si, 5, DemodBuffer); si += 5; + uint32_t acl = PackBits(si, 8, DemodBuffer); si += 8; + uint32_t mfc = PackBits(si, 8, DemodBuffer); si += 8; + uint32_t cid = PackBits(si, 5, DemodBuffer); si += 5; + uint32_t icr = PackBits(si, 3, DemodBuffer); si += 3; + uint32_t year = PackBits(si, 4, DemodBuffer); si += 4; + uint32_t quarter = PackBits(si, 2, DemodBuffer); si += 2; + uint32_t lotid = PackBits(si, 14, DemodBuffer); si += 14; + uint32_t wafer = PackBits(si, 5, DemodBuffer); si += 5; uint32_t dw = PackBits(si, 15, DemodBuffer); - year += 2000; - + time_t t = time(NULL); + struct tm tm = *localtime(&t); + if ( year > tm.tm_year-110) + year += 2000; + else + year += 2010; + + if ( acl != 0xE0 ) { + PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. "); + return 1; + } + PrintAndLog(""); PrintAndLog("-- T55xx Trace Information ----------------------------------"); PrintAndLog("-------------------------------------------------------------"); PrintAndLog(" ACL Allocation class (ISO/IEC 15963-1) : 0x%02X (%d)", acl, acl); - PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d)", mfc, mfc); - PrintAndLog(" CID : 0x%02X (%d)", cid, cid); + PrintAndLog(" MFC Manufacturer ID (ISO/IEC 7816-6) : 0x%02X (%d) - %s", mfc, mfc, getTagInfo(mfc)); + PrintAndLog(" CID : 0x%02X (%d) - %s", cid, cid, GetModelStrFromCID(cid)); PrintAndLog(" ICR IC Revision : %d",icr ); PrintAndLog(" Manufactured"); - PrintAndLog(" Year/Quarter : %d/%d",year, quarter ); + PrintAndLog(" Year/Quarter : %d/%d",year, quarter); PrintAndLog(" Lot ID : %d", lotid ); PrintAndLog(" Wafer number : %d", wafer); PrintAndLog(" Die Number : %d", dw); PrintAndLog("-------------------------------------------------------------"); PrintAndLog(" Raw Data - Page 1"); - PrintAndLog(" Block 0 : 0x%08X %s", bl0, sprint_bin(DemodBuffer+5,32) ); - PrintAndLog(" Block 0 : 0x%08X %s", bl1, sprint_bin(DemodBuffer+37,32) ); + PrintAndLog(" Block 0 : 0x%08X %s", bl0, sprint_bin(DemodBuffer+config.offset+repeat,32) ); + PrintAndLog(" Block 1 : 0x%08X %s", bl1, sprint_bin(DemodBuffer+config.offset+repeat+32,32) ); PrintAndLog("-------------------------------------------------------------"); + /* TRACE - BLOCK O Bits Definition HEX @@ -550,40 +778,17 @@ int CmdT55xxInfo(const char *Cmd){ */ char cmdp = param_getchar(Cmd, 0); - if (cmdp == 'h' || cmdp == 'H') + if (strlen(Cmd) > 1 || cmdp == 'h' || cmdp == 'H') return usage_t55xx_info(); - if (strlen(Cmd)==0){ - - // read block 0, Page 0. Configuration. - UsbCommand c = {CMD_T55XX_READ_BLOCK, {0, 0, 0}}; - c.d.asBytes[0] = 0x0; - - //Password mode - // if ( res == 2 ) { - // c.arg[2] = password; - // c.d.asBytes[0] = 0x1; - // } - - SendCommand(&c); - if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { - PrintAndLog("command execution time out"); - return 1; - } + if (strlen(Cmd)==0) + AquireData( CONFIGURATION_BLOCK ); - uint8_t got[12000]; - GetFromBigBuf(got,sizeof(got),0); - WaitForResponse(CMD_ACK,NULL); - setGraphBuf(got, 12000); - } - - DecodeT55xxBlock(); + if (!DecodeT55xxBlock()) return 1; - if ( !DemodBufferLen) - return 2; - - - uint8_t si = 1; + if ( DemodBufferLen < 32) return 1; + + uint8_t si = config.offset; uint32_t bl0 = PackBits(si, 32, DemodBuffer); uint32_t safer = PackBits(si, 4, DemodBuffer); si += 4; @@ -609,7 +814,7 @@ int CmdT55xxInfo(const char *Cmd){ PrintAndLog(" Data bit rate : %s", GetBitRateStr(dbr)); PrintAndLog(" eXtended mode : %s", (extend) ? "Yes - Warning":"No"); PrintAndLog(" Modulation : %s", GetModulationStr(datamod)); - PrintAndLog(" PSK clock freq : %d", pskcf); + PrintAndLog(" PSK clock frequency : %d", pskcf); PrintAndLog(" AOR - Answer on Request : %s", (aor) ? "Yes":"No"); PrintAndLog(" OTP - One Time Pad : %s", (otp) ? "Yes - Warning":"No" ); PrintAndLog(" Max block : %d", maxblk); @@ -620,7 +825,7 @@ int CmdT55xxInfo(const char *Cmd){ PrintAndLog(" POR-Delay : %s", (por) ? "Yes":"No"); PrintAndLog("-------------------------------------------------------------"); PrintAndLog(" Raw Data - Page 0"); - PrintAndLog(" Block 0 : 0x%08X %s", bl0, sprint_bin(DemodBuffer+5,32) ); + PrintAndLog(" Block 0 : 0x%08X %s", bl0, sprint_bin(DemodBuffer+config.offset,32) ); PrintAndLog("-------------------------------------------------------------"); return 0; @@ -657,36 +862,71 @@ int CmdT55xxDump(const char *Cmd){ return 0; } +int AquireData( uint8_t block ){ + + UsbCommand c; + + if ( block == CONFIGURATION_BLOCK ) + c.cmd = CMD_T55XX_READ_BLOCK; + else if (block == TRACE_BLOCK ) + c.cmd = CMD_T55XX_READ_TRACE; + + c.arg[0] = 0x00; + c.arg[1] = 0x00; + c.arg[2] = 0x00; + c.d.asBytes[0] = 0x0; + + //Password mode + // if ( res == 2 ) { + // c.arg[2] = password; + // c.d.asBytes[0] = 0x1; + // } + + clearCommandBuffer(); + SendCommand(&c); + if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) { + PrintAndLog("command execution time out"); + return 1; + } + + uint8_t got[12000]; + GetFromBigBuf(got,sizeof(got),0); + WaitForResponse(CMD_ACK,NULL); + setGraphBuf(got, 12000); + return 0; +} + char * GetBitRateStr(uint32_t id){ - static char buf[40]; + static char buf[25]; + char *retStr = buf; switch (id){ case 0: - sprintf(retStr,"%d - RF/8",id); + snprintf(retStr,sizeof(buf),"%d - RF/8",id); break; case 1: - sprintf(retStr,"%d - RF/16",id); + snprintf(retStr,sizeof(buf),"%d - RF/16",id); break; case 2: - sprintf(retStr,"%d - RF/32",id); + snprintf(retStr,sizeof(buf),"%d - RF/32",id); break; case 3: - sprintf(retStr,"%d - RF/40",id); + snprintf(retStr,sizeof(buf),"%d - RF/40",id); break; case 4: - sprintf(retStr,"%d - RF/50",id); + snprintf(retStr,sizeof(buf),"%d - RF/50",id); break; case 5: - sprintf(retStr,"%d - RF/64",id); + snprintf(retStr,sizeof(buf),"%d - RF/64",id); break; case 6: - sprintf(retStr,"%d - RF/100",id); + snprintf(retStr,sizeof(buf),"%d - RF/100",id); break; case 7: - sprintf(retStr,"%d - RF/128",id); + snprintf(retStr,sizeof(buf),"%d - RF/128",id); break; default: - sprintf(retStr,"%d - (Unknown)",id); + snprintf(retStr,sizeof(buf),"%d - (Unknown)",id); break; } @@ -694,88 +934,159 @@ char * GetBitRateStr(uint32_t id){ } char * GetSaferStr(uint32_t id){ - static char buf[40]; + static char buf[40]; char *retStr = buf; - sprintf(retStr,"%d",id); + snprintf(retStr,sizeof(buf),"%d",id); if (id == 6) { - sprintf(retStr,"%d - passwd",id); + snprintf(retStr,sizeof(buf),"%d - passwd",id); } if (id == 9 ){ - sprintf(retStr,"%d - testmode",id); + snprintf(retStr,sizeof(buf),"%d - testmode",id); } return buf; } + char * GetModulationStr( uint32_t id){ - static char buf[40]; + static char buf[60]; char *retStr = buf; switch (id){ case 0: - sprintf(retStr,"%d - DIRECT (ASK/NRZ)",id); + snprintf(retStr,sizeof(buf),"%d - DIRECT (ASK/NRZ)",id); break; case 1: - sprintf(retStr,"%d - PSK 1 phase change when input changes",id); + snprintf(retStr,sizeof(buf),"%d - PSK 1 phase change when input changes",id); break; case 2: - sprintf(retStr,"%d - PSK 2 phase change on bitclk if input high",id); + snprintf(retStr,sizeof(buf),"%d - PSK 2 phase change on bitclk if input high",id); break; case 3: - sprintf(retStr,"%d - PSK 3 phase change on rising edge of input",id); + snprintf(retStr,sizeof(buf),"%d - PSK 3 phase change on rising edge of input",id); break; case 4: - sprintf(retStr,"%d - FSK 1 RF/8 RF/5",id); + snprintf(retStr,sizeof(buf),"%d - FSK 1 RF/8 RF/5",id); break; case 5: - sprintf(retStr,"%d - FSK 2 RF/8 RF/10",id); + snprintf(retStr,sizeof(buf),"%d - FSK 2 RF/8 RF/10",id); break; case 6: - sprintf(retStr,"%d - FSK 1a RF/5 RF/8",id); + snprintf(retStr,sizeof(buf),"%d - FSK 1a RF/5 RF/8",id); break; case 7: - sprintf(retStr,"%d - FSK 2a RF/10 RF/8",id); + snprintf(retStr,sizeof(buf),"%d - FSK 2a RF/10 RF/8",id); break; case 8: - sprintf(retStr,"%d - Manschester",id); + snprintf(retStr,sizeof(buf),"%d - Manchester",id); break; case 16: - sprintf(retStr,"%d - Biphase",id); + snprintf(retStr,sizeof(buf),"%d - Biphase",id); + break; + case 0x18: + snprintf(retStr,sizeof(buf),"%d - Biphase a - AKA Conditional Dephase Encoding(CDP)",id); break; case 17: - sprintf(retStr,"%d - Reserved",id); + snprintf(retStr,sizeof(buf),"%d - Reserved",id); break; default: - sprintf(retStr,"0x%02X (Unknown)",id); + snprintf(retStr,sizeof(buf),"0x%02X (Unknown)",id); break; } return buf; } +char * GetModelStrFromCID(uint32_t cid){ + + static char buf[10]; + char *retStr = buf; + + if (cid == 1) snprintf(retStr, sizeof(buf),"ATA5577M1"); + if (cid == 2) snprintf(retStr, sizeof(buf),"ATA5577M2"); + return buf; +} + +char * GetSelectedModulationStr( uint8_t id){ + + static char buf[20]; + char *retStr = buf; + + switch (id){ + case DEMOD_FSK: + snprintf(retStr,sizeof(buf),"FSK"); + break; + case DEMOD_FSK1: + snprintf(retStr,sizeof(buf),"FSK1"); + break; + case DEMOD_FSK1a: + snprintf(retStr,sizeof(buf),"FSK1a"); + break; + case DEMOD_FSK2: + snprintf(retStr,sizeof(buf),"FSK2"); + break; + case DEMOD_FSK2a: + snprintf(retStr,sizeof(buf),"FSK2a"); + break; + case DEMOD_ASK: + snprintf(retStr,sizeof(buf),"ASK"); + break; + case DEMOD_NRZ: + snprintf(retStr,sizeof(buf),"DIRECT/NRZ"); + break; + case DEMOD_PSK1: + snprintf(retStr,sizeof(buf),"PSK1"); + break; + case DEMOD_PSK2: + snprintf(retStr,sizeof(buf),"PSK2"); + break; + case DEMOD_PSK3: + snprintf(retStr,sizeof(buf),"PSK3"); + break; + case DEMOD_BI: + snprintf(retStr,sizeof(buf),"BIPHASE"); + break; + case DEMOD_BIa: + snprintf(retStr,sizeof(buf),"BIPHASEa - (CDP)"); + break; + default: + snprintf(retStr,sizeof(buf),"(Unknown)"); + break; + } + return buf; +} + +void t55x7_create_config_block( int tagtype ){ + //switch? + + +} + +/* uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bits){ int i = start; int j = len-1; - if (len > 32) { - return 0; - } - uint32_t tmp = 0; - for (; j >= 0; --j, ++i){ + + if (len > 32) return 0; + + uint32_t tmp = 0; + for (; j >= 0; --j, ++i) tmp |= bits[i] << j; - } + return tmp; } - +*/ static command_t CommandTable[] = { {"help", CmdHelp, 1, "This help"}, - {"config", CmdT55xxSetConfig, 1, "Set T55XX config for modulation, inversed data"}, - {"detect", CmdT55xxDetect, 0, "Try detecting the tag modulation from reading the configuration block."}, + {"config", CmdT55xxSetConfig, 1, "Set/Get T55XX configuration (modulation, inverted, offset, rate)"}, + {"detect", CmdT55xxDetect, 0, "[1] Try detecting the tag modulation from reading the configuration block."}, {"read", CmdT55xxReadBlock, 0, " [password] -- Read T55xx block data (page 0) [optional password]"}, {"write", CmdT55xxWriteBlock,0, " [password] -- Write T55xx block data (page 0) [optional password]"}, {"trace", CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"}, {"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"}, {"dump", CmdT55xxDump, 0, "[password] Dump T55xx card block 0-7. [optional password]"}, + {"special", special, 0, "Show block changes with 64 different offsets"}, {NULL, NULL, 0, NULL} };