X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/8c6cca0ba1424200dcb872eb96918281c9e62784..d3f8d76d6c157e7ffc8cf03536f73c30fe2ab561:/common/protocols.h?ds=sidebyside diff --git a/common/protocols.h b/common/protocols.h index 06a80de1..37a88449 100644 --- a/common/protocols.h +++ b/common/protocols.h @@ -1,6 +1,9 @@ #ifndef PROTOCOLS_H #define PROTOCOLS_H +#include + + //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501 /* ISO14443A (usually NFC tags) @@ -96,7 +99,8 @@ NXP/Philips CUSTOM COMMANDS #define ICLASS_CMD_PAGESEL 0x84 #define ICLASS_CMD_READCHECK_KD 0x88 #define ICLASS_CMD_READCHECK_KC 0x18 -#define ICLASS_CMD_CHECK 0x05 +#define ICLASS_CMD_CHECK_KC 0x95 +#define ICLASS_CMD_CHECK_KD 0x05 #define ICLASS_CMD_DETECT 0x0F #define ICLASS_CMD_HALT 0x00 #define ICLASS_CMD_UPDATE 0x87 @@ -105,44 +109,53 @@ NXP/Philips CUSTOM COMMANDS #define ISO14443A_CMD_REQA 0x26 -#define ISO14443A_CMD_READBLOCK 0x30 #define ISO14443A_CMD_WUPA 0x52 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97 -#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ? #define ISO14443A_CMD_HALT 0x50 #define ISO14443A_CMD_RATS 0xE0 -#define MIFARE_AUTH_KEYA 0x60 -#define MIFARE_AUTH_KEYB 0x61 -#define MIFARE_MAGICWUPC1 0x40 -#define MIFARE_MAGICWUPC2 0x43 -#define MIFARE_MAGICWIPEC 0x41 -#define MIFARE_CMD_INC 0xC0 -#define MIFARE_CMD_DEC 0xC1 -#define MIFARE_CMD_RESTORE 0xC2 -#define MIFARE_CMD_TRANSFER 0xB0 - -#define MIFARE_EV1_PERSONAL_UID 0x40 -#define MIFARE_EV1_SETMODE 0x43 - - -#define MIFARE_ULC_WRITE 0xA2 -//#define MIFARE_ULC__COMP_WRITE 0xA0 -#define MIFARE_ULC_AUTH_1 0x1A -#define MIFARE_ULC_AUTH_2 0xAF - -#define MIFARE_ULEV1_AUTH 0x1B -#define MIFARE_ULEV1_VERSION 0x60 -#define MIFARE_ULEV1_FASTREAD 0x3A -//#define MIFARE_ULEV1_WRITE 0xA2 -//#define MIFARE_ULEV1_COMP_WRITE 0xA0 -#define MIFARE_ULEV1_READ_CNT 0x39 -#define MIFARE_ULEV1_INCR_CNT 0xA5 -#define MIFARE_ULEV1_READSIG 0x3C -#define MIFARE_ULEV1_CHECKTEAR 0x3E -#define MIFARE_ULEV1_VCSL 0x4B +#define MIFARE_CMD_READBLOCK 0x30 +#define MIFARE_CMD_WRITEBLOCK 0xA0 +#define MIFARE_AUTH_KEYA 0x60 +#define MIFARE_AUTH_KEYB 0x61 +#define MIFARE_MAGICWUPC1 0x40 +#define MIFARE_MAGICWUPC2 0x43 +#define MIFARE_MAGICWIPEC 0x41 +#define MIFARE_CMD_INC 0xC0 +#define MIFARE_CMD_DEC 0xC1 +#define MIFARE_CMD_RESTORE 0xC2 +#define MIFARE_CMD_TRANSFER 0xB0 + +#define MIFARE_EV1_PERSONAL_UID 0x40 +#define MIFARE_EV1_UIDF0 0x00 +#define MIFARE_EV1_UIDF1 0x40 +#define MIFARE_EV1_UIDF2 0x20 +#define MIFARE_EV1_UIDF3 0x60 +#define MIFARE_EV1_SETMODE 0x43 + +#define MIFARE_ULC_WRITE 0xA2 +#define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK +#define MIFARE_ULC_AUTH_1 0x1A +#define MIFARE_ULC_AUTH_2 0xAF + +#define MIFARE_ULEV1_AUTH 0x1B +#define MIFARE_ULEV1_VERSION 0x60 +#define MIFARE_ULEV1_FASTREAD 0x3A +#define MIFARE_ULEV1_WRITE 0xA2 +#define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK +#define MIFARE_ULEV1_READ_CNT 0x39 +#define MIFARE_ULEV1_INCR_CNT 0xA5 +#define MIFARE_ULEV1_READSIG 0x3C +#define MIFARE_ULEV1_CHECKTEAR 0x3E +#define MIFARE_ULEV1_VCSL 0x4B + +// mifare 4bit card answers +#define CARD_ACK 0x0A // 1010 - ACK +#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed) +#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error + /** 06 00 = INITIATE @@ -174,6 +187,7 @@ NXP/Philips CUSTOM COMMANDS #define ISO15693_WRITEBLOCK 0x21 #define ISO15693_LOCKBLOCK 0x22 #define ISO15693_READ_MULTI_BLOCK 0x23 +#define ISO15693_WRITE_MULTI_BLOCK 0x24 #define ISO15693_SELECT 0x25 #define ISO15693_RESET_TO_READY 0x26 #define ISO15693_WRITE_AFI 0x27 @@ -227,6 +241,26 @@ NXP/Philips CUSTOM COMMANDS #define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes) #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) +// HITAG1 commands +#define HITAG1_SET_CCNEW 0xC2 // left 5 bits only +#define HITAG1_READ_ID 0x00 // not a real command, consists of 5 bits length, bits partial SN, 8 bits CRC +#define HITAG1_SELECT 0x00 // left 5 bits only, followed by 32 bits SN and 8 bits CRC +#define HITAG1_WRPPAGE 0x80 // left 4 bits only, followed by 8 bits page and 8 bits CRC +#define HITAG1_WRPBLK 0x90 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_WRCPAGE 0xA0 // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC +#define HITAG1_WRCBLK 0xB0 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_RDPPAGE 0xC0 // left 4 bits only, followed by 8 bits page and 8 bits CRC +#define HITAG1_RDPBLK 0xD0 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_RDCPAGE 0xE0 // left 4 bits only, followed by 8 bits page and 8 bits CRC +#define HITAG1_RDCBLK 0xF0 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_HALT 0x70 // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC + +// HITAG2 commands +#define HITAG2_START_AUTH 0xC0 // left 5 bits only +#define HITAG2_READ_PAGE 0xC0 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits +#define HITAG2_READ_PAGE_INVERTED 0x44 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits +#define HITAG2_WRITE_PAGE 0x82 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits +#define HITAG2_HALT 0x00 // left 5 bits only #define ISO_14443A 0 #define ICLASS 1 @@ -234,6 +268,9 @@ NXP/Philips CUSTOM COMMANDS #define TOPAZ 3 #define PROTO_MIFARE 4 #define ISO_7816_4 5 +#define ISO_15693 6 +#define ISO_14443_4 7 + //-- Picopass fuses #define FUSE_FPERS 0x80 @@ -246,31 +283,31 @@ NXP/Philips CUSTOM COMMANDS #define FUSE_RA 0x01 // ISO 7816-4 Basic interindustry commands. For command APDU's. -#define ISO7816_READ_BINARY 0xB0 -#define ISO7816_WRITE_BINARY 0xD0 -#define ISO7816_UPDATE_BINARY 0xD6 #define ISO7816_ERASE_BINARY 0x0E +#define ISO7816_VERIFY 0x20 +#define ISO7816_MANAGE_CHANNEL 0x70 +#define ISO7816_EXTERNAL_AUTHENTICATE 0x82 +#define ISO7816_GET_CHALLENGE 0x84 +#define ISO7816_INTERNAL_AUTHENTICATE 0x88 +#define ISO7816_SELECT_FILE 0xA4 +#define ISO7816_GET_PROCESSING_OPTIONS 0xA8 +#define ISO7816_READ_BINARY 0xB0 #define ISO7816_READ_RECORDS 0xB2 -#define ISO7816_WRITE_RECORDS 0xD2 -#define ISO7816_APPEND_RECORD 0xE2 -#define ISO7816_UPDATE_RECORD 0xDC +#define ISO7816_GET_RESPONSE 0xC0 +#define ISO7816_ENVELOPE 0xC2 #define ISO7816_GET_DATA 0xCA +#define ISO7816_WRITE_BINARY 0xD0 +#define ISO7816_WRITE_RECORD 0xD2 +#define ISO7816_UPDATE_BINARY 0xD6 #define ISO7816_PUT_DATA 0xDA -#define ISO7816_SELECT_FILE 0xA4 -#define ISO7816_VERIFY 0x20 -#define ISO7816_INTERNAL_AUTHENTICATION 0x88 -#define ISO7816_EXTERNAL_AUTHENTICATION 0x82 -#define ISO7816_GET_CHALLENGE 0xB4 -#define ISO7816_MANAGE_CHANNEL 0x70 +#define ISO7816_UPDATE_DATA 0xDC +#define ISO7816_APPEND_RECORD 0xE2 // ISO7816-4 For response APDU's #define ISO7816_OK 0x9000 // 6x xx = ERROR +#define ISO7816_MAX_FRAME_SIZE 261 - -void printIclassDumpInfo(uint8_t* iclass_dump); -void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb); - /* T55x7 configuration register definitions */ #define T55x7_POR_DELAY 0x00000001 #define T55x7_ST_TERMINATOR 0x00000008