X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/8fcbf652dab8846dd8a2dcb17812af6528539950..1010aacca01ea823e5265babefa0d325863a2ba3:/include/proxmark3.h?ds=sidebyside

diff --git a/include/proxmark3.h b/include/proxmark3.h
index 31c71642..b3530c64 100644
--- a/include/proxmark3.h
+++ b/include/proxmark3.h
@@ -1,87 +1,113 @@
-//-----------------------------------------------------------------------------
-// Definitions of interest to most of the software for this project.
-// Jonathan Westhues, Mar 2006
-//-----------------------------------------------------------------------------
-
-#ifndef __PROXMARK3_H
-#define __PROXMARK3_H
-
-// Might as well have the hardware-specific defines everywhere.
-#include <at91sam7s128.h>
-
-#include <config_gpio.h>
-#define LOW(x)	PIO_OUTPUT_DATA_CLEAR = (1 << (x))
-#define HIGH(x)	PIO_OUTPUT_DATA_SET = (1 << (x))
-
-#define SPI_FPGA_MODE	0
-#define SPI_LCD_MODE	1
-
-typedef unsigned long DWORD;
-typedef signed long SDWORD;
-typedef unsigned long long QWORD;
-typedef int BOOL;
-typedef unsigned char BYTE;
-typedef signed char SBYTE;
-typedef unsigned short WORD;
-typedef signed short SWORD;
-#define TRUE 1
-#define FALSE 0
-
-#include <usb_cmd.h>
-
-#define PACKED __attribute__((__packed__))
-
-#define USB_D_PLUS_PULLUP_ON() { \
-		PIO_OUTPUT_DATA_SET = (1<<GPIO_USB_PU); \
-		PIO_OUTPUT_ENABLE = (1<<GPIO_USB_PU); \
-	}
-#define USB_D_PLUS_PULLUP_OFF() PIO_OUTPUT_DISABLE = (1<<GPIO_USB_PU)
-
-#define LED_A_ON()		PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_A)
-#define LED_A_OFF()		PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_A)
-#define LED_B_ON()		PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_B)
-#define LED_B_OFF()		PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_B)
-#define LED_C_ON()		PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_C)
-#define LED_C_OFF()		PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_C)
-#define LED_D_ON()		PIO_OUTPUT_DATA_SET = (1<<GPIO_LED_D)
-#define LED_D_OFF()		PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_LED_D)
-#define RELAY_ON()		PIO_OUTPUT_DATA_SET = (1<<GPIO_RELAY)
-#define RELAY_OFF()		PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_RELAY)
-#define BUTTON_PRESS()	!(PIO_PIN_DATA_STATUS & (1<<GPIO_BUTTON))
-//--------------------------------
-// USB declarations
-
-void UsbSendPacket(BYTE *packet, int len);
-BOOL UsbConnected();
-BOOL UsbPoll(BOOL blinkLeds);
-void UsbStart(void);
-
-// This function is provided by the apps/bootrom, and called from UsbPoll
-// if data are available.
-void UsbPacketReceived(BYTE *packet, int len);
-
-#define VERSION_INFORMATION_MAGIC 0x56334d50
-struct version_information {
-	int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */ 
-	char versionversion; /* Must be 1 */
-	char present; /* 1 if the version information could be created at compile time, otherwise 0 and the remaining fields (except for magic) are empty */
-	char clean; /* 1: Tree was clean, no local changes. 0: Tree was unclean. 2: Couldn't be determined */
-	char svnversion[9]; /* String with the SVN revision */
-	char buildtime[30]; /* string with the build time */
-} __attribute__((packed));
-
-#define COMMON_AREA_MAGIC 0x43334d50
-#define COMMON_AREA_COMMAND_NONE 0
-#define COMMON_AREA_COMMAND_ENTER_FLASH_MODE 1
-struct common_area {
-	int magic; /* Magic sequence, to distinguish against random uninitialized memory */
-	char version; /* Must be 1 */
-	char command;
-	struct {
-		unsigned int bootrom_present:1; /* Set when a bootrom that is capable of parsing the common area is present */
-		unsigned int osimage_present:1; /* Set when a osimage that is capable of parsing the common area is present */
-	} __attribute__((packed)) flags;
-	int arg1, arg2;
-} __attribute__((packed));
-
-#endif
+//-----------------------------------------------------------------------------
+// Jonathan Westhues, Mar 2006
+//
+// This code is licensed to you under the terms of the GNU GPL, version 2 or,
+// at your option, any later version. See the LICENSE.txt file for the text of
+// the license.
+//-----------------------------------------------------------------------------
+// Hardware and interface definitions
+//-----------------------------------------------------------------------------
+
+#ifndef __PROXMARK3_H
+#define __PROXMARK3_H
+
+// Might as well have the hardware-specific defines everywhere.
+#include "at91sam7s512.h"
+#include "config_gpio.h"
+#include "usb_cmd.h"
+
+#define WDT_HIT()								AT91C_BASE_WDTC->WDTC_WDCR = 0xa5000001
+
+#define PWM_CH_MODE_PRESCALER(x)				((x)<<0)
+#define PWM_CHANNEL(x)							(1<<(x))
+
+#define ADC_CHAN_LF								4
+#define ADC_CHAN_HF								5
+#define ADC_MODE_PRESCALE(x)					((x)<<8)
+#define ADC_MODE_STARTUP_TIME(x)				((x)<<16)
+#define ADC_MODE_SAMPLE_HOLD_TIME(x)			((x)<<24)
+#define ADC_CHANNEL(x)							(1<<(x))
+#define ADC_END_OF_CONVERSION(x)				(1<<(x))
+
+#define SSC_CLOCK_MODE_START(x)					((x)<<8)
+#define SSC_FRAME_MODE_WORDS_PER_TRANSFER(x)	((x)<<8)
+#define SSC_CLOCK_MODE_SELECT(x)				((x)<<0)
+#define SSC_FRAME_MODE_BITS_IN_WORD(x)			(((x)-1)<<0)
+
+#define MC_FLASH_COMMAND_KEY					((0x5a)<<24)
+#define MC_FLASH_MODE_FLASH_WAIT_STATES(x)		((x)<<8)
+#define MC_FLASH_MODE_MASTER_CLK_IN_MHZ(x)		(((x)+((x)/2))<<16)
+#define MC_FLASH_COMMAND_PAGEN(x)				((x)<<8)
+
+#define RST_CONTROL_KEY							(0xa5<<24)
+
+#define PMC_MAIN_OSC_STARTUP_DELAY(x)			((x)<<8)
+#define PMC_PLL_DIVISOR(x)						(x)
+#define PMC_PLL_MULTIPLIER(x)					(((x)-1)<<16)
+#define PMC_PLL_COUNT_BEFORE_LOCK(x)			((x)<<8)
+#define PMC_PLL_FREQUENCY_RANGE(x)				((x)<<14)
+#define PMC_PLL_USB_DIVISOR(x)					((x)<<28)
+
+#define UDP_INTERRUPT_ENDPOINT(x)				(1<<(x))
+#define UDP_CSR_BYTES_RECEIVED(x)				(((x) >> 16) & 0x7ff)
+//**************************************************************
+
+#define LOW(x)	 AT91C_BASE_PIOA->PIO_CODR = (x)
+#define HIGH(x)	 AT91C_BASE_PIOA->PIO_SODR = (x)
+#define GETBIT(x) (AT91C_BASE_PIOA->PIO_ODSR & (x)) ? 1:0
+#define SETBIT(x, y) (y) ? (HIGH(x)):(LOW(x))
+#define INVBIT(x) SETBIT((x), !(GETBIT(x)))
+
+#define SPI_FPGA_MODE	0
+#define SPI_LCD_MODE	1
+
+#define FPGA_BITSTREAM_ERR 0
+#define FPGA_BITSTREAM_LF 1
+#define FPGA_BITSTREAM_HF 2
+
+#define TRUE 1
+#define FALSE 0
+
+//#define PACKED __attribute__((__packed__))
+
+#define LED_A_ON()		HIGH(GPIO_LED_A)
+#define LED_A_OFF()		LOW(GPIO_LED_A)
+#define LED_A_INV()		INVBIT(GPIO_LED_A)
+#define LED_B_ON()		HIGH(GPIO_LED_B)
+#define LED_B_OFF()		LOW(GPIO_LED_B)
+#define LED_B_INV()		INVBIT(GPIO_LED_B)
+#define LED_C_ON()		HIGH(GPIO_LED_C)
+#define LED_C_OFF()		LOW(GPIO_LED_C)
+#define LED_C_INV()		INVBIT(GPIO_LED_C)
+#define LED_D_ON()		HIGH(GPIO_LED_D)
+#define LED_D_OFF()		LOW(GPIO_LED_D)
+#define LED_D_INV()		INVBIT(GPIO_LED_D)
+#define RELAY_ON()		HIGH(GPIO_RELAY)
+#define RELAY_OFF()		LOW(GPIO_RELAY)
+#define BUTTON_PRESS()	!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_BUTTON)
+
+#define VERSION_INFORMATION_MAGIC 0x56334d50
+struct version_information {
+	int magic; /* Magic sequence to identify this as a correct version information structure. Must be VERSION_INFORMATION_MAGIC */
+	char versionversion; /* Must be 1 */
+	char present; /* 1 if the version information could be created at compile time, otherwise 0 and the remaining fields (except for magic) are empty */
+	char clean; /* 1: Tree was clean, no local changes. 0: Tree was unclean. 2: Couldn't be determined */
+	char gitversion[50]; /* String with the git revision */
+	char buildtime[30]; /* string with the build time */
+} __attribute__((packed));
+
+#define COMMON_AREA_MAGIC 0x43334d50
+#define COMMON_AREA_COMMAND_NONE 0
+#define COMMON_AREA_COMMAND_ENTER_FLASH_MODE 1
+struct common_area {
+	int magic; /* Magic sequence, to distinguish against random uninitialized memory */
+	char version; /* Must be 1 */
+	char command;
+	struct {
+		unsigned int bootrom_present:1; /* Set when a bootrom that is capable of parsing the common area is present */
+		unsigned int osimage_present:1; /* Set when a osimage that is capable of parsing the common area is present */
+	} __attribute__((packed)) flags;
+	int arg1, arg2;
+} __attribute__((packed));
+
+#endif