X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/9276e859a6f57ba2518e501fd8148a390ca3aa5e..aaa1a9a2dcb8b9f2b6acd937f84464daa50ecad6:/armsrc/lfops.c diff --git a/armsrc/lfops.c b/armsrc/lfops.c index c070b87c..5c074c3a 100644 --- a/armsrc/lfops.c +++ b/armsrc/lfops.c @@ -16,8 +16,8 @@ #include "string.h" #include "lfdemod.h" #include "lfsampling.h" -#include "usb_cdc.h" - +#include "protocols.h" +#include "usb_cdc.h" // for usb_poll_validate_length /** * Function to do a modulation and then get samples. @@ -37,6 +37,8 @@ void ModThenAcquireRawAdcSamples125k(uint32_t delay_off, uint32_t period_0, uint sample_config sc = { 0,0,1, divisor_used, 0}; setSamplingConfig(&sc); + //clear read buffer + BigBuf_Clear_keep_EM(); /* Make sure the tag is reset */ FpgaDownloadAndGo(FPGA_BITSTREAM_LF); @@ -202,8 +204,7 @@ void ReadTItag(void) crc = update_crc16(crc, (shift1>>16)&0xff); crc = update_crc16(crc, (shift1>>24)&0xff); - Dbprintf("Info: Tag data: %x%08x, crc=%x", - (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); + Dbprintf("Info: Tag data: %x%08x, crc=%x", (unsigned int)shift1, (unsigned int)shift0, (unsigned int)shift2 & 0xFFFF); if (crc != (shift2&0xffff)) { Dbprintf("Error: CRC mismatch, expected %x", (unsigned int)crc); } else { @@ -349,7 +350,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) // start by writing 0xBB (keyword) and 0xEB (password) // then write 80 bits of data (or 64 bit data + 16 bit crc if you prefer) // finally end with 0x0300 (write frame) - // all data is sent lsb firts + // all data is sent lsb first // finish with 15ms programming time // modulate antenna @@ -379,7 +380,7 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc) AcquireTiType(); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - DbpString("Now use 'lf ti read' to check"); + DbpString("Now use `lf ti read` to check"); } void SimulateTagLowFrequency(int period, int gap, int ledcontrol) @@ -401,7 +402,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) for(;;) { //wait until SSC_CLK goes HIGH while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) { - if(BUTTON_PRESS() || (usb_poll_validate_length() )) { + if(BUTTON_PRESS() || usb_poll_validate_length() ) { DbpString("Stopped"); return; } @@ -418,7 +419,7 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol) //wait until SSC_CLK goes LOW while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) { - if(BUTTON_PRESS()) { + if( BUTTON_PRESS() || usb_poll_validate_length() ) { DbpString("Stopped"); return; } @@ -595,20 +596,10 @@ void CmdFSKsimTAG(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) } } Dbprintf("Simulating with fcHigh: %d, fcLow: %d, clk: %d, invert: %d, n: %d",fcHigh, fcLow, clk, invert, n); - /*Dbprintf("DEBUG: First 32:"); - uint8_t *dest = BigBuf_get_addr(); - i=0; - Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]); - i+=16; - Dbprintf("%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d%d", dest[i],dest[i+1],dest[i+2],dest[i+3],dest[i+4],dest[i+5],dest[i+6],dest[i+7],dest[i+8],dest[i+9],dest[i+10],dest[i+11],dest[i+12],dest[i+13],dest[i+14],dest[i+15]); - */ - if (ledcontrol) - LED_A_ON(); + if (ledcontrol) LED_A_ON(); SimulateTagLowFrequency(n, 0, ledcontrol); - - if (ledcontrol) - LED_A_OFF(); + if (ledcontrol) LED_A_OFF(); } // compose ask waveform for one bit(ASK) @@ -637,7 +628,19 @@ static void biphaseSimBit(uint8_t c, int *n, uint8_t clock, uint8_t *phase) memset(dest+(*n), c ^ *phase, clock); *phase ^= 1; } + *n += clock; +} +static void stAskSimBit(int *n, uint8_t clock) { + uint8_t *dest = BigBuf_get_addr(); + uint8_t halfClk = clock/2; + //ST = .5 high .5 low 1.5 high .5 low 1 high + memset(dest+(*n), 1, halfClk); + memset(dest+(*n) + halfClk, 0, halfClk); + memset(dest+(*n) + clock, 1, clock + halfClk); + memset(dest+(*n) + clock*2 + halfClk, 0, halfClk); + memset(dest+(*n) + clock*3, 1, clock); + *n += clock*4; } // args clock, ask/man or askraw, invert, transmission separator @@ -655,7 +658,7 @@ void CmdASKsimTag(uint16_t arg1, uint16_t arg2, size_t size, uint8_t *BitStream) for (i=0; i>1) & 0xFFFF ); - }else { //standard HID tags 44/96 bits + } else { //standard HID tags 44/96 bits uint8_t bitlen = 0; uint32_t fc = 0; uint32_t cardnum = 0; @@ -826,6 +834,8 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) uint8_t *dest = BigBuf_get_addr(); size_t size; int idx=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -839,7 +849,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) size = 50*128*2; //big enough to catch 2 sequences of largest format idx = AWIDdemodFSK(dest, &size); - if (idx>0 && size==96){ + if (idx<=0 || size!=96) continue; // Index map // 0 10 20 30 40 50 60 // | | | | | | | @@ -859,6 +869,7 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) uint32_t rawHi2 = bytebits_to_byte(dest+idx,32); size = removeParity(dest, idx+8, 4, 1, 88); + if (size != 66) continue; // ok valid card found! // Index map @@ -900,7 +911,6 @@ void CmdAWIDdemodFSK(int findone, int *high, int *low, int ledcontrol) return; } // reset - } idx = 0; WDT_HIT(); } @@ -916,6 +926,8 @@ void CmdEM410xdemod(int findone, int *high, int *low, int ledcontrol) int clk=0, invert=0, errCnt=0, maxErr=20; uint32_t hi=0; uint64_t lo=0; + //clear read buffer + BigBuf_Clear_keep_EM(); // Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); @@ -977,7 +989,11 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) uint16_t number=0; uint8_t crc = 0; uint16_t calccrc = 0; - // Configure to go in 125Khz listen mode + + //clear read buffer + BigBuf_Clear_keep_EM(); + +// Configure to go in 125Khz listen mode LFSetupFPGAForADC(95, true); while(!BUTTON_PRESS() && !usb_poll_validate_length()) { @@ -1051,73 +1067,21 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) } /*------------------------------ - * T5555/T5557/T5567 routines + * T5555/T5557/T5567/T5577 routines *------------------------------ - */ - -/* T55x7 configuration register definitions */ -#define T55x7_POR_DELAY 0x00000001 -#define T55x7_ST_TERMINATOR 0x00000008 -#define T55x7_PWD 0x00000010 -#define T55x7_MAXBLOCK_SHIFT 5 -#define T55x7_AOR 0x00000200 -#define T55x7_PSKCF_RF_2 0 -#define T55x7_PSKCF_RF_4 0x00000400 -#define T55x7_PSKCF_RF_8 0x00000800 -#define T55x7_MODULATION_DIRECT 0 -#define T55x7_MODULATION_PSK1 0x00001000 -#define T55x7_MODULATION_PSK2 0x00002000 -#define T55x7_MODULATION_PSK3 0x00003000 -#define T55x7_MODULATION_FSK1 0x00004000 -#define T55x7_MODULATION_FSK2 0x00005000 -#define T55x7_MODULATION_FSK1a 0x00006000 -#define T55x7_MODULATION_FSK2a 0x00007000 -#define T55x7_MODULATION_MANCHESTER 0x00008000 -#define T55x7_MODULATION_BIPHASE 0x00010000 -#define T55x7_MODULATION_DIPHASE 0x00018000 -//#define T55x7_MODULATION_BIPHASE57 0x00011000 -#define T55x7_BITRATE_RF_8 0 -#define T55x7_BITRATE_RF_16 0x00040000 -#define T55x7_BITRATE_RF_32 0x00080000 -#define T55x7_BITRATE_RF_40 0x000C0000 -#define T55x7_BITRATE_RF_50 0x00100000 -#define T55x7_BITRATE_RF_64 0x00140000 -#define T55x7_BITRATE_RF_100 0x00180000 -#define T55x7_BITRATE_RF_128 0x001C0000 - -/* T5555 (Q5) configuration register definitions */ -#define T5555_ST_TERMINATOR 0x00000001 -#define T5555_MAXBLOCK_SHIFT 0x00000001 -#define T5555_MODULATION_MANCHESTER 0 -#define T5555_MODULATION_PSK1 0x00000010 -#define T5555_MODULATION_PSK2 0x00000020 -#define T5555_MODULATION_PSK3 0x00000030 -#define T5555_MODULATION_FSK1 0x00000040 -#define T5555_MODULATION_FSK2 0x00000050 -#define T5555_MODULATION_BIPHASE 0x00000060 -#define T5555_MODULATION_DIRECT 0x00000070 -#define T5555_INVERT_OUTPUT 0x00000080 -#define T5555_PSK_RF_2 0 -#define T5555_PSK_RF_4 0x00000100 -#define T5555_PSK_RF_8 0x00000200 -#define T5555_USE_PWD 0x00000400 -#define T5555_USE_AOR 0x00000800 -#define T5555_BITRATE_SHIFT 12 -#define T5555_FAST_WRITE 0x00004000 -#define T5555_PAGE_SELECT 0x00008000 - -/* - * Relevant times in microsecond + * NOTE: T55x7/T5555 configuration register definitions moved to protocols.h + * + * Relevant communication times in microsecond * To compensate antenna falling times shorten the write times * and enlarge the gap ones. * Q5 tags seems to have issues when these values changes. */ -#define START_GAP 50*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) +#define START_GAP 31*8 // was 250 // SPEC: 1*8 to 50*8 - typ 15*8 (or 15fc) #define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc) -#define WRITE_0 16*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) +#define WRITE_0 18*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc) #define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550 -#define READ_GAP 52*8 +#define READ_GAP 15*8 // VALUES TAKEN FROM EM4x function: SendForward // START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) @@ -1136,24 +1100,58 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol) void TurnReadLFOn(int delay) { FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // Give it a bit of time for the resonant antenna to settle. - SpinDelayUs(delay); //155*8 //50*8 + + // measure antenna strength. + //int adcval = ((MAX_ADC_LF_VOLTAGE * AvgAdc(ADC_CHAN_LF)) >> 10); + // where to save it + + SpinDelayUs(delay); } // Write one bit to card void T55xxWriteBit(int bit) { - FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); if (!bit) - SpinDelayUs(WRITE_0); + TurnReadLFOn(WRITE_0); else - SpinDelayUs(WRITE_1); + TurnReadLFOn(WRITE_1); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(WRITE_GAP); } +// Send T5577 reset command then read stream (see if we can identify the start of the stream) +void T55xxResetRead(void) { + LED_A_ON(); + //clear buffer now so it does not interfere with timing later + BigBuf_Clear_keep_EM(); + + // Set up FPGA, 125kHz + LFSetupFPGAForADC(95, true); + + // Trigger T55x7 in mode. + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + SpinDelayUs(START_GAP); + + // reset tag - op code 00 + T55xxWriteBit(0); + T55xxWriteBit(0); + + // Turn field on to read the response + TurnReadLFOn(READ_GAP); + + // Acquisition + doT55x7Acquisition(BigBuf_max_traceLen()); + + // Turn the field off + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off + cmd_send(CMD_ACK,0,0,0,0,0); + LED_A_OFF(); +} + // Write one card block in page 0, no lock -void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode) { +void T55xxWriteBlockExt(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) { LED_A_ON(); - + bool PwdMode = arg & 0x1; + uint8_t Page = (arg & 0x2)>>1; uint32_t i = 0; // Set up FPGA, 125kHz @@ -1165,8 +1163,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Opcode 10 T55xxWriteBit(1); - T55xxWriteBit(0); //Page 0 - + T55xxWriteBit(Page); //Page 0 if (PwdMode){ // Send Pwd for (i = 0x80000000; i != 0; i >>= 1) @@ -1186,19 +1183,29 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod // Perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550, // so wait a little more) TurnReadLFOn(20 * 1000); + //could attempt to do a read to confirm write took + // as the tag should repeat back the new block + // until it is reset, but to confirm it we would + // need to know the current block 0 config mode // turn field off FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - cmd_send(CMD_ACK,0,0,0,0,0); LED_A_OFF(); - LED_B_OFF(); } -// Read one card block in page 0 +// Write one card block in page 0, no lock +void T55xxWriteBlock(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) { + T55xxWriteBlockExt(Data, Block, Pwd, arg); + cmd_send(CMD_ACK,0,0,0,0,0); +} + +// Read one card block in page [page] void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { LED_A_ON(); - uint8_t PwdMode = arg0 & 0xFF; + bool PwdMode = arg0 & 0x1; + uint8_t Page = (arg0 & 0x2) >> 1; uint32_t i = 0; + bool RegReadMode = (Block == 0xFF); //clear buffer now so it does not interfere with timing later BigBuf_Clear_ext(false); @@ -1206,27 +1213,27 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { //make sure block is at max 7 Block &= 0x7; - // Set up FPGA, 125kHz + // Set up FPGA, 125kHz to power up the tag LFSetupFPGAForADC(95, true); - // Trigger T55x7 Direct Access Mode + // Trigger T55x7 Direct Access Mode with start gap FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); SpinDelayUs(START_GAP); - // Opcode 10 + // Opcode 1[page] T55xxWriteBit(1); - T55xxWriteBit(0); //Page 0 + T55xxWriteBit(Page); //Page 0 if (PwdMode){ // Send Pwd for (i = 0x80000000; i != 0; i >>= 1) T55xxWriteBit(Pwd & i); } - // Send a zero bit separation T55xxWriteBit(0); - // Send Block number + // Send Block number (if direct access mode) + if (!RegReadMode) for (i = 0x04; i != 0; i >>= 1) T55xxWriteBit(Block & i); @@ -1234,44 +1241,12 @@ void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) { TurnReadLFOn(READ_GAP); // Acquisition - doT55x7Acquisition(); + doT55x7Acquisition(12000); - // turn field off - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); + // Turn the field off + FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off cmd_send(CMD_ACK,0,0,0,0,0); LED_A_OFF(); - LED_B_OFF(); -} - -// Read card traceability data (page 1) -void T55xxReadTrace(void){ - LED_A_ON(); - - //clear buffer now so it does not interfere with timing later - BigBuf_Clear_ext(false); - - // Set up FPGA, 125kHz - LFSetupFPGAForADC(95, true); - - // Trigger T55x7 Direct Access Mode - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - SpinDelayUs(START_GAP); - - // Opcode 11 - T55xxWriteBit(1); - T55xxWriteBit(1); //Page 1 - - // Turn field on to read the response - TurnReadLFOn(READ_GAP); - - // Acquisition - doT55x7Acquisition(); - - // turn field off - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - cmd_send(CMD_ACK,0,0,0,0,0); - LED_A_OFF(); - LED_B_OFF(); } void T55xxWakeUp(uint32_t Pwd){ @@ -1293,159 +1268,124 @@ void T55xxWakeUp(uint32_t Pwd){ for (i = 0x80000000; i != 0; i >>= 1) T55xxWriteBit(Pwd & i); - // Turn field on to read the response - TurnReadLFOn(READ_GAP); + // Turn and leave field on to let the begin repeating transmission + TurnReadLFOn(20*1000); } /*-------------- Cloning routines -----------*/ +void WriteT55xx(uint32_t *blockdata, uint8_t startblock, uint8_t numblocks) { + // write last block first and config block last (if included) + for (uint8_t i = numblocks+startblock; i > startblock; i--) + T55xxWriteBlockExt(blockdata[i-1], i-1, 0, 0); +} + // Copy HID id to card and setup block 0 config -void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) -{ - int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format - int last_block = 0; +void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT) { + uint32_t data[] = {0,0,0,0,0,0,0}; + uint8_t last_block = 0; if (longFMT){ // Ensure no more than 84 bits supplied - if (hi2>0xFFFFF) { + if (hi2 > 0xFFFFF) { DbpString("Tags can only have 84 bits."); return; } // Build the 6 data blocks for supplied 84bit ID last_block = 6; - data1 = 0x1D96A900; // load preamble (1D) & long format identifier (9E manchester encoded) - for (int i=0;i<4;i++) { - if (hi2 & (1<<(19-i))) - data1 |= (1<<(((3-i)*2)+1)); // 1 -> 10 - else - data1 |= (1<<((3-i)*2)); // 0 -> 01 - } - - data2 = 0; - for (int i=0;i<16;i++) { - if (hi2 & (1<<(15-i))) - data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data2 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data3 = 0; - for (int i=0;i<16;i++) { - if (hi & (1<<(31-i))) - data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data3 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data4 = 0; - for (int i=0;i<16;i++) { - if (hi & (1<<(15-i))) - data4 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data4 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data5 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(31-i))) - data5 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data5 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data6 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(15-i))) - data6 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data6 |= (1<<((15-i)*2)); // 0 -> 01 - } - } - else { + // load preamble (1D) & long format identifier (9E manchester encoded) + data[1] = 0x1D96A900 | (manchesterEncode2Bytes((hi2 >> 16) & 0xF) & 0xFF); + // load raw id from hi2, hi, lo to data blocks (manchester encoded) + data[2] = manchesterEncode2Bytes(hi2 & 0xFFFF); + data[3] = manchesterEncode2Bytes(hi >> 16); + data[4] = manchesterEncode2Bytes(hi & 0xFFFF); + data[5] = manchesterEncode2Bytes(lo >> 16); + data[6] = manchesterEncode2Bytes(lo & 0xFFFF); + } else { // Ensure no more than 44 bits supplied - if (hi>0xFFF) { + if (hi > 0xFFF) { DbpString("Tags can only have 44 bits."); return; } - // Build the 3 data blocks for supplied 44bit ID last_block = 3; - - data1 = 0x1D000000; // load preamble - - for (int i=0;i<12;i++) { - if (hi & (1<<(11-i))) - data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10 - else - data1 |= (1<<((11-i)*2)); // 0 -> 01 - } - - data2 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(31-i))) - data2 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data2 |= (1<<((15-i)*2)); // 0 -> 01 - } - - data3 = 0; - for (int i=0;i<16;i++) { - if (lo & (1<<(15-i))) - data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10 - else - data3 |= (1<<((15-i)*2)); // 0 -> 01 - } + // load preamble + data[1] = 0x1D000000 | (manchesterEncode2Bytes(hi) & 0xFFFFFF); + data[2] = manchesterEncode2Bytes(lo >> 16); + data[3] = manchesterEncode2Bytes(lo & 0xFFFF); } + // load chip config block + data[0] = T55x7_BITRATE_RF_50 | T55x7_MODULATION_FSK2a | last_block << T55x7_MAXBLOCK_SHIFT; + + //TODO add selection of chip for Q5 or T55x7 + // data[0] = (((50-2)/2)<> 32), 1, 0, 0); - T55xxWriteBlock((uint32_t)id, 2, 0, 0); - - // Config for EM410x (RF/64, Manchester, Maxblock=2) - if (card) { - // Clock rate is stored in bits 8-15 of the card value - clock = (card & 0xFF00) >> 8; - Dbprintf("Clock rate: %d", clock); - switch (clock) { - case 50: - clock = T55x7_BITRATE_RF_50; - case 40: - clock = T55x7_BITRATE_RF_40; - case 32: - clock = T55x7_BITRATE_RF_32; - break; - case 16: - clock = T55x7_BITRATE_RF_16; - break; - case 0: - // A value of 0 is assumed to be 64 for backwards-compatibility - // Fall through... - case 64: - clock = T55x7_BITRATE_RF_64; - break; - default: + uint32_t data[] = {0, (uint32_t)(id>>32), (uint32_t)(id & 0xFFFFFFFF)}; + + clock = (card & 0xFF00) >> 8; + clock = (clock == 0) ? 64 : clock; + Dbprintf("Clock rate: %d", clock); + if (card & 0xFF) { //t55x7 + clock = GetT55xxClockBit(clock); + if (clock == 0) { Dbprintf("Invalid clock rate: %d", clock); return; } - - // Writing configuration for T55x7 tag - T55xxWriteBlock(clock | - T55x7_MODULATION_MANCHESTER | - 2 << T55x7_MAXBLOCK_SHIFT, - 0, 0, 0); + data[0] = clock | T55x7_MODULATION_MANCHESTER | (2 << T55x7_MAXBLOCK_SHIFT); + } else { //t5555 (Q5) + clock = (clock-2)>>1; //n = (RF-2)/2 + data[0] = (clock << T5555_BITRATE_SHIFT) | T5555_MODULATION_MANCHESTER | (2 << T5555_MAXBLOCK_SHIFT); } - else - // Writing configuration for T5555(Q5) tag - T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT | - T5555_MODULATION_MANCHESTER | - 2 << T5555_MAXBLOCK_SHIFT, - 0, 0, 0); - LED_D_OFF(); - Dbprintf("Tag %s written with 0x%08x%08x\n", card ? "T55x7":"T5555", - (uint32_t)(id >> 32), (uint32_t)id); -} - -// Clone Indala 64-bit tag by UID to T55x7 -void CopyIndala64toT55x7(int hi, int lo) -{ - //Program the 2 data blocks for supplied 64bit UID - // and the block 0 for Indala64 format - T55xxWriteBlock(hi,1,0,0); - T55xxWriteBlock(lo,2,0,0); - //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=2) - T55xxWriteBlock(T55x7_BITRATE_RF_32 | - T55x7_MODULATION_PSK1 | - 2 << T55x7_MAXBLOCK_SHIFT, - 0, 0, 0); - //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data) - // T5567WriteBlock(0x603E1042,0); - - DbpString("DONE!"); -} + WriteT55xx(data, 0, 3); -void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7) -{ - //Program the 7 data blocks for supplied 224bit UID - // and the block 0 for Indala224 format - T55xxWriteBlock(uid1,1,0,0); - T55xxWriteBlock(uid2,2,0,0); - T55xxWriteBlock(uid3,3,0,0); - T55xxWriteBlock(uid4,4,0,0); - T55xxWriteBlock(uid5,5,0,0); - T55xxWriteBlock(uid6,6,0,0); - T55xxWriteBlock(uid7,7,0,0); - //Config for Indala (RF/32;PSK1 with RF/2;Maxblock=7) - T55xxWriteBlock(T55x7_BITRATE_RF_32 | - T55x7_MODULATION_PSK1 | - 7 << T55x7_MAXBLOCK_SHIFT, - 0,0,0); - //Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data) - // T5567WriteBlock(0x603E10E2,0); - - DbpString("DONE!"); + LED_D_OFF(); + Dbprintf("Tag %s written with 0x%08x%08x\n", + card ? "T55x7":"T5555", + (uint32_t)(id >> 32), + (uint32_t)id); } //----------------------------------- @@ -1610,6 +1488,15 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer // prepares command bits // see EM4469 spec //==================================================================== +//-------------------------------------------------------------------- +// VALUES TAKEN FROM EM4x function: SendForward +// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle) +// WRITE_GAP = 128; (16*8) +// WRITE_1 = 256 32*8; (32*8) + +// These timings work for 4469/4269/4305 (with the 55*8 above) +// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8); + uint8_t Prepare_Cmd( uint8_t cmd ) { *forward_ptr++ = 0; //start bit @@ -1741,7 +1628,7 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { uint16_t bufsize = BigBuf_max_traceLen(); uint32_t i = 0; - //clear buffer now so it does not interfere with timing later + // Clear destination buffer before sending the command BigBuf_Clear_ext(false); //If password mode do login @@ -1795,15 +1682,3 @@ void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off LED_D_OFF(); } - -void CopyViKingtoT55x7(uint32_t block1, uint32_t block2) { - LED_D_ON(); - T55xxWriteBlock(block1,1,0,0); - T55xxWriteBlock(block2,2,0,0); - T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T55x7_MAXBLOCK_SHIFT,0,0,0); - // T55xxWriteBlock(T55x7_MODULATION_MANCHESTER | T55x7_BITRATE_RF_32 | 2 << T5555_MAXBLOCK_SHIFT,0,0,1); - // ICEMAN NOTES: - // Shouldn't this one be: T55x7_MAXBLOCK_SHIFT and 0 in password mode - LED_D_OFF(); -} -