X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/a087e9cf40bdb4d7546a7645995624a519aef2a6..2b1f4228c2987459445d30443f92038f9ea080c6:/client/cmdlft55xx.h

diff --git a/client/cmdlft55xx.h b/client/cmdlft55xx.h
index 004154ff..77963fde 100644
--- a/client/cmdlft55xx.h
+++ b/client/cmdlft55xx.h
@@ -10,20 +10,61 @@
 #ifndef CMDLFT55XX_H__
 #define CMDLFT55XX_H__
 
+// config blocks
+#define T55X7_DEFAULT_CONFIG_BLOCK      0x000880E8      // compat mode, data rate 32, manchester, ST, 7 data blocks
+#define T55X7_RAW_CONFIG_BLOCK          0x000880E0      // compat mode, data rate 32, manchester, 7 data blocks
+
+#define T55X7_EM_UNIQUE_CONFIG_BLOCK    0x00148040      // emulate em4x02/unique - compat mode, manchester, data rate 64, 2 data blocks
+
+
+// FDXB requires data inversion and BiPhase 57 is simply BipHase 50 inverted, so we can either do it using the modulation scheme or the inversion flag
+// we've done both below to prove that it works either way, and the modulation value for BiPhase 50 in the Atmel data sheet of binary "10001" (17) is a typo,
+// and it should actually be "10000" (16)
+// #define T55X7_FDXB_CONFIG_BLOCK         903F8080  // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks
+#define T55X7_FDXB_CONFIG_BLOCK         0x903F0082  // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks
+#define T55X7_HID_26_CONFIG_BLOCK       0x00107060  // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks
+#define T55X7_INDALA_64_CONFIG_BLOCK    0x00081040  // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2
+#define T55X7_INDALA_224_CONFIG_BLOCK   0x000810E0  // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7
+#define T55X7_GUARDPROXII_CONFIG_BLOCK	0x00150060	// bitrate 64pcb, Direct modulation, Biphase, 3 data blocks
+#define T55X7_VIKING_CONFIG_BLOCK		0x00088040	// compat mode, data rate 32, Manchester, 2 data blocks
+#define T55X7_NORALYS_CONFIG_BLOCK		0x00088C6A	// compat mode,   (NORALYS - KCP3000)
+#define T55X7_IOPROX_CONFIG_BLOCK		0x00147040  // maxblock 2
+#define T55X7_bin 0b0010
+
+
 typedef struct {
 	enum {
 		DEMOD_NRZ  = 0x00,    
 		DEMOD_PSK1 = 0x01,
 		DEMOD_PSK2 = 0x02,
 		DEMOD_PSK3 = 0x03,
-		DEMOD_FSK  = 0x04,     
+		DEMOD_FSK1  = 0x04,     
+		DEMOD_FSK1a = 0x05,     
+		DEMOD_FSK2  = 0x06,     
+		DEMOD_FSK2a = 0x07, 
+		DEMOD_FSK   = 0xF0, //generic FSK (auto detect FCs)    
 		DEMOD_ASK  = 0x08,
-		DEMOD_BI   = 0x16,
+		DEMOD_BI   = 0x10,
+		DEMOD_BIa  = 0x18,		
 	}  modulation;
-	bool inversed;
+	bool inverted;
 	uint8_t offset;
 	uint32_t block0;
+	enum {
+		RF_8 = 0x00,
+		RF_16 = 0x01,
+		RF_32 = 0x02,
+		RF_40 = 0x03,
+		RF_50 = 0x04,
+		RF_64 = 0x05,
+		RF_100 = 0x06,
+		RF_128 = 0x07,
+	} bitrate;
+	bool Q5;
 } t55xx_conf_block_t;
+t55xx_conf_block_t Get_t55xx_Config();
+void Set_t55xx_Config(t55xx_conf_block_t conf);
+
 
 int CmdLFT55XX(const char *Cmd);
 int CmdT55xxSetConfig(const char *Cmd);
@@ -32,18 +73,25 @@ int CmdT55xxWriteBlock(const char *Cmd);
 int CmdT55xxReadTrace(const char *Cmd);
 int CmdT55xxInfo(const char *Cmd);
 int CmdT55xxDetect(const char *Cmd);
+int CmdResetRead(const char *Cmd);
+int CmdT55xxWipe(const char *Cmd);
+int CmdT55xxBruteForce(const char *Cmd);
 
 char * GetBitRateStr(uint32_t id);
 char * GetSaferStr(uint32_t id);
 char * GetModulationStr( uint32_t id);
 char * GetModelStrFromCID(uint32_t cid);
 char * GetSelectedModulationStr( uint8_t id);
-uint32_t PackBits(uint8_t start, uint8_t len, uint8_t* bitstream);
+uint32_t PackBits(uint8_t start, uint8_t len, uint8_t *bitstream);
+void printT5xxHeader(uint8_t page);
 void printT55xxBlock(const char *demodStr);
-void printConfiguration( t55xx_conf_block_t b);
+int printConfiguration( t55xx_conf_block_t b);
 
-void DecodeT55xxBlock();
+bool DecodeT55xxBlock();
 bool tryDetectModulation();
-bool test(uint8_t mode, uint8_t *offset);
+bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);
 int special(const char *Cmd);
+int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );
+
+bool detectPassword(int password);
 #endif