X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/a61b4976bd2085bf0495855b48fcad0d9ed4572e..463ca973e7cf1e866bb60d7cc33d38e473aa4d3d:/armsrc/lfops.c

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index c80caf77..1a7c3224 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -452,25 +452,34 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 {
 	int i = 0;
-	uint8_t *buff = (uint8_t *)BigBuf;
+	uint8_t *buf = (uint8_t *)BigBuf;
 
 	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-
+	//FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+	
+	// Connect the A/D to the peak-detected low-frequency path.
+	//SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+		
 	// Configure output and enable pin that is connected to the FPGA (for modulating)
 	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;    
-	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-	
-	AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
+	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;    // (PIO_PER) PIO Enable Register , 
+	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;    // (PIO_OER) Output Enable Register
+	AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;     // (PIO_ODR) Output Disable Register
 
 	// Give it a bit of time for the resonant antenna to settle.
-	SpinDelay(30);
+	SpinDelay(150);
+	
+	while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)); // wait for ssp_clk to go high
+	while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK);    // wait for ssp_clk to go low
+	
+ 	while(!BUTTON_PRESS()) { 
+		WDT_HIT();
 
-	for(;;) { 
-		
-		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
+		// PIO_PDSR = Pin Data Status Register  
+		// GPIO_SSC_CLK  = SSC Transmit Clock
+		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {    // wait for ssp_clk to go high
 			 if(BUTTON_PRESS()) {
 				 DbpString("Stopped at 0");
 				 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
@@ -479,12 +488,21 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 			 WDT_HIT();
 		}
         
-		if ( buff[i] )
-			OPEN_COIL();
-		else
-			SHORT_COIL();
-       
-		 while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
+		// PIO_CODR = Clear Output Data Register
+		// PIO_SODR = Set Output Data Register
+		//#define LOW(x)	 AT91C_BASE_PIOA->PIO_CODR = (x)
+		//#define HIGH(x)	 AT91C_BASE_PIOA->PIO_SODR = (x)
+		
+		if ( buf[i] > 0 ){
+			HIGH(GPIO_SSC_DOUT);
+			//FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+			//FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+		} else {
+			LOW(GPIO_SSC_DOUT);
+			//FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); 
+		}
+	   
+		 while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {   // wait for ssp_clk to go low
 			 if(BUTTON_PRESS()) {
 				DbpString("Stopped at 1");
 				FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
@@ -492,18 +510,23 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 			}
 			WDT_HIT();
 		 }
-        
+		
+		//SpinDelayUs(512);
+		
 		++i;
 		if(i == period) {
 			i = 0;
 			if (gap) {
 				// turn of modulation
-				SHORT_COIL();
+				LOW(GPIO_SSC_DOUT);
 				// wait
 				SpinDelay(gap);
 			} 
 		}
 	}
+	DbpString("Stopped");
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	return;
 }
 
 #define DEBUG_FRAME_CONTENTS 1