X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/a7247d858b195bd21eeba6d65a882323ad71d030..7242efa07c18a92c4139c26ad7009f2d8866fc89:/armsrc/legicrf.c diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index 867c1ad7..3fbdf5cb 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -1,172 +1,754 @@ -/* - * LEGIC RF simulation code - * - * (c) 2009 Henryk Plötz - */ - -#include +//----------------------------------------------------------------------------- +// (c) 2009 Henryk Plötz +// +// This code is licensed to you under the terms of the GNU GPL, version 2 or, +// at your option, any later version. See the LICENSE.txt file for the text of +// the license. +//----------------------------------------------------------------------------- +// LEGIC RF simulation code +//----------------------------------------------------------------------------- +#include "proxmark3.h" #include "apps.h" +#include "util.h" +#include "string.h" + #include "legicrf.h" +#include "legic_prng.h" +#include "crc.h" static struct legic_frame { - int num_bytes; - int num_bits; - char data[10]; + int bits; + uint32_t data; } current_frame; -static char response = 0x2b; /* 1101 01 */ -static void frame_send(char *response, int num_bytes, int num_bits) +static enum { + STATE_DISCON, + STATE_IV, + STATE_CON, +} legic_state; + +static crc_t legic_crc; +static int legic_read_count; +static uint32_t legic_prng_bc; +static uint32_t legic_prng_iv; + +static int legic_phase_drift; +static int legic_frame_drift; +static int legic_reqresp_drift; + +AT91PS_TC timer; +AT91PS_TC prng_timer; + +static void setup_timer(void) { -#if 0 - /* Use the SSC to send a response. 8-bit transfers, LSBit first, 100us per bit */ -#else - /* Bitbang the response */ - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; - AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; - - /* Wait for the frame start */ - while(AT91C_BASE_TC1->TC_CV < 490) ; - - int i; - for(i=0; i<(num_bytes*8+num_bits); i++) { - int nextbit = AT91C_BASE_TC1->TC_CV + 150; - int bit = response[i/8] & (1<<(i%8)); - if(bit) - AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; - else - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; - while(AT91C_BASE_TC1->TC_CV < nextbit) ; - } - AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; -#endif + /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging + * this it won't be terribly accurate but should be good enough. + */ + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1); + timer = AT91C_BASE_TC1; + timer->TC_CCR = AT91C_TC_CLKDIS; + timer->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK; + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + + /* + * Set up Timer 2 to use for measuring time between frames in + * tag simulation mode. Runs 4x faster as Timer 1 + */ + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC2); + prng_timer = AT91C_BASE_TC2; + prng_timer->TC_CCR = AT91C_TC_CLKDIS; + prng_timer->TC_CMR = AT91C_TC_CLKS_TIMER_DIV2_CLOCK; + prng_timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; } -static void frame_respond(struct legic_frame *f) +/* At TIMER_CLOCK3 (MCK/32) */ +#define RWD_TIME_1 150 /* RWD_TIME_PAUSE off, 80us on = 100us */ +#define RWD_TIME_0 90 /* RWD_TIME_PAUSE off, 40us on = 60us */ +#define RWD_TIME_PAUSE 30 /* 20us */ +#define RWD_TIME_FUZZ 20 /* rather generous 13us, since the peak detector + hysteresis fuzz quite a bit */ +#define TAG_TIME_BIT 150 /* 100us for every bit */ +#define TAG_TIME_WAIT 490 /* time from RWD frame end to tag frame start, experimentally determined */ + +#define SIM_DIVISOR 586 /* prng_time/SIM_DIVISOR count prng needs to be forwared */ +#define SIM_SHIFT 900 /* prng_time+SIM_SHIFT shift of delayed start */ + +#define SESSION_IV 0x55 +#define OFFSET_LOG 1024 + +#define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz))) + +/* Generate Keystream */ +static uint32_t get_key_stream(int skip, int count) { - LED_D_ON(); - if(f->num_bytes == 0 && f->num_bits == 7) { - /* This seems to be the initial dialogue, just send 6 bits of static data */ - frame_send(&response, 0, 6); - } - LED_D_OFF(); + uint32_t key=0; int i; + + /* Use int to enlarge timer tc to 32bit */ + legic_prng_bc += prng_timer->TC_CV; + prng_timer->TC_CCR = AT91C_TC_SWTRG; + + /* If skip == -1, forward prng time based */ + if(skip == -1) { + i = (legic_prng_bc+SIM_SHIFT)/SIM_DIVISOR; /* Calculate Cycles based on timer */ + i -= legic_prng_count(); /* substract cycles of finished frames */ + i -= count; /* substract current frame length, rewidn to bedinning */ + legic_prng_forward(i); + } else { + legic_prng_forward(skip); + } + + /* Write Time Data into LOG */ + if(count == 6) { i = -1; } else { i = legic_read_count; } + ((uint8_t*)BigBuf)[OFFSET_LOG+128+i] = legic_prng_count(); + ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4] = (legic_prng_bc >> 0) & 0xff; + ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+1] = (legic_prng_bc >> 8) & 0xff; + ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+2] = (legic_prng_bc >>16) & 0xff; + ((uint8_t*)BigBuf)[OFFSET_LOG+256+i*4+3] = (legic_prng_bc >>24) & 0xff; + ((uint8_t*)BigBuf)[OFFSET_LOG+384+i] = count; + + /* Generate KeyStream */ + for(i=0; inum_bytes >= (int)sizeof(f->data)) - return; /* Overflow, won't happen */ - f->data[f->num_bytes] |= (bit<num_bits); - f->num_bits++; - if(f->num_bits > 7) { - f->num_bits = 0; - f->num_bytes++; - } + /* Bitbang the response */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; + + /* Use time to crypt frame */ + if(crypt) { + legic_prng_forward(2); /* TAG_TIME_WAIT -> shift by 2 */ + int i; int key = 0; + for(i=0; iTC_CV < (TAG_TIME_WAIT - 30)) ; + + int i; + for(i=0; iTC_CV + TAG_TIME_BIT; + int bit = response & 1; + response = response >> 1; + if(bit) { + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + } else { + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + } + while(timer->TC_CV < nextbit) ; + } + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; } -static int frame_is_empty(struct legic_frame *f) +/* Send a frame in reader mode, the FPGA must have been set up by + * LegicRfReader + */ +static void frame_send_rwd(uint32_t data, int bits) { - return( (f->num_bytes + f->num_bits) <= 4 ); + /* Start clock */ + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + + int i; + for(i=0; iTC_CV; + int pause_end = starttime + RWD_TIME_PAUSE, bit_end; + int bit = data & 1; + data = data >> 1; + + if(bit ^ legic_prng_get_bit()) { + bit_end = starttime + RWD_TIME_1; + } else { + bit_end = starttime + RWD_TIME_0; + } + + /* RWD_TIME_PAUSE time off, then some time on, so that the complete bit time is + * RWD_TIME_x, where x is the bit to be transmitted */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + while(timer->TC_CV < pause_end) ; + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + legic_prng_forward(1); /* bit duration is longest. use this time to forward the lfsr */ + + while(timer->TC_CV < bit_end) ; + } + + { + /* One final pause to mark the end of the frame */ + int pause_end = timer->TC_CV + RWD_TIME_PAUSE; + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + while(timer->TC_CV < pause_end) ; + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + } + + /* Reset the timer, to measure time until the start of the tag frame */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ } -static void frame_handle(struct legic_frame *f) +/* Receive a frame from the card in reader emulation mode, the FPGA and + * timer must have been set up by LegicRfReader and frame_send_rwd. + * + * The LEGIC RF protocol from card to reader does not include explicit + * frame start/stop information or length information. The reader must + * know beforehand how many bits it wants to receive. (Notably: a card + * sending a stream of 0-bits is indistinguishable from no card present.) + * + * Receive methodology: There is a fancy correlator in hi_read_rx_xcorr, but + * I'm not smart enough to use it. Instead I have patched hi_read_tx to output + * the ADC signal with hysteresis on SSP_DIN. Bit-bang that signal and look + * for edges. Count the edges in each bit interval. If they are approximately + * 0 this was a 0-bit, if they are approximately equal to the number of edges + * expected for a 212kHz subcarrier, this was a 1-bit. For timing we use the + * timer that's still running from frame_send_rwd in order to get a synchronization + * with the frame that we just sent. + * + * FIXME: Because we're relying on the hysteresis to just do the right thing + * the range is severely reduced (and you'll probably also need a good antenna). + * So this should be fixed some time in the future for a proper receiver. + */ +static void frame_receive_rwd(struct legic_frame * const f, int bits, int crypt) { - if( !frame_is_empty(f) ) { - frame_respond(f); + uint32_t the_bit = 1; /* Use a bitmask to save on shifts */ + uint32_t data=0; + int i, old_level=0, edges=0; + int next_bit_at = TAG_TIME_WAIT; + + if(bits > 32) { + bits = 32; + } + + AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; + + /* we have some time now, precompute the cipher + * since we cannot compute it on the fly while reading */ + legic_prng_forward(2); + + if(crypt) + { + for(i=0; iTC_CV < next_bit_at) ; + + next_bit_at += TAG_TIME_BIT; + + for(i=0; iTC_CV < next_bit_at) { + int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + if(level != old_level) + edges++; + old_level = level; + } + next_bit_at += TAG_TIME_BIT; + + if(edges > 20 && edges < 60) { /* expected are 42 edges */ + data ^= the_bit; + } + the_bit <<= 1; } + + f->data = data; + f->bits = bits; + + /* Reset the timer, to synchronize the next frame */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ } -static void frame_clean(struct legic_frame *f) +static void frame_append_bit(struct legic_frame * const f, int bit) { - if(!frame_is_empty(f)) - memset(f->data, 0, sizeof(f->data)); - f->num_bits = 0; - f->num_bytes = 0; + if(f->bits >= 31) { + return; /* Overflow, won't happen */ + } + f->data |= (bit<bits); + f->bits++; } -static void emit(int bit) +static void frame_clean(struct legic_frame * const f) { - if(bit == -1) { - frame_handle(¤t_frame); - frame_clean(¤t_frame); - } else if(bit == 0) { - frame_append_bit(¤t_frame, 0); - } else if(bit == 1) { - frame_append_bit(¤t_frame, 1); - } + f->data = 0; + f->bits = 0; } -void LegicRfSimulate(void) +static uint32_t perform_setup_phase_rwd(int iv) { - /* ADC path high-frequency peak detector, FPGA in high-frequency simulator mode, - * modulation mode set to 212kHz subcarrier. We are getting the incoming raw - * envelope waveform on DIN and should send our response on DOUT. - * - * The LEGIC RF protocol is pulse-pause-encoding from reader to card, so we'll - * measure the time between two rising edges on DIN, and no encoding on the - * subcarrier from card to reader, so we'll just shift out our verbatim data - * on DOUT, 1 bit is 100us. The time from reader to card frame is still unclear, - * seems to be 300us-ish. - */ + + /* Switch on carrier and let the tag charge for 1ms */ + AT91C_BASE_PIOA->PIO_SODR = GPIO_SSC_DOUT; + SpinDelay(1); + + legic_prng_init(0); /* no keystream yet */ + frame_send_rwd(iv, 7); + legic_prng_init(iv); + + frame_clean(¤t_frame); + frame_receive_rwd(¤t_frame, 6, 1); + legic_prng_forward(1); /* we wait anyways */ + while(timer->TC_CV < 387) ; /* ~ 258us */ + frame_send_rwd(0x19, 6); + + return current_frame.data; +} + +static void LegicCommonInit(void) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); SetAdcMuxFor(GPIO_MUXSEL_HIPKD); FpgaSetupSsc(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K); - - /* Bitbang the receiver */ - AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; - AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; - - /* Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging - * this it won't be terribly accurate but should be good enough. - */ - AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1); - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; - AT91C_BASE_TC1->TC_CMR = TC_CMR_TCCLKS_TIMER_CLOCK3; - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - int old_level = 0; + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX); -/* At TIMER_CLOCK3 (MCK/32) */ -#define BIT_TIME_1 150 -#define BIT_TIME_0 90 -#define BIT_TIME_FUZZ 20 - - int active = 0; - while(!BUTTON_PRESS()) { - int level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); - int time = AT91C_BASE_TC1->TC_CV; - - if(level != old_level) { - if(level == 1) { - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; - if(time > (BIT_TIME_1-BIT_TIME_FUZZ) && time < (BIT_TIME_1+BIT_TIME_FUZZ)) { - /* 1 bit */ - emit(1); - active = 1; - } else if(time > (BIT_TIME_0-BIT_TIME_FUZZ) && time < (BIT_TIME_0+BIT_TIME_FUZZ)) { - /* 0 bit */ - emit(0); - active = 0; - } else { - /* invalid */ - emit(-1); - active = 0; - } + /* Bitbang the transmitter */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; + + setup_timer(); + + crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); +} + +static void switch_off_tag_rwd(void) +{ + /* Switch off carrier, make sure tag is reset */ + AT91C_BASE_PIOA->PIO_CODR = GPIO_SSC_DOUT; + SpinDelay(10); + + WDT_HIT(); +} +/* calculate crc for a legic command */ +static int LegicCRC(int byte_index, int value, int cmd_sz) { + crc_clear(&legic_crc); + crc_update(&legic_crc, 1, 1); /* CMD_READ */ + crc_update(&legic_crc, byte_index, cmd_sz-1); + crc_update(&legic_crc, value, 8); + return crc_finish(&legic_crc); +} + +int legic_read_byte(int byte_index, int cmd_sz) { + int byte; + + legic_prng_forward(4); /* we wait anyways */ + while(timer->TC_CV < 387) ; /* ~ 258us + 100us*delay */ + + frame_send_rwd(1 | (byte_index << 1), cmd_sz); + frame_clean(¤t_frame); + + frame_receive_rwd(¤t_frame, 12, 1); + + byte = current_frame.data & 0xff; + if( LegicCRC(byte_index, byte, cmd_sz) != (current_frame.data >> 8) ) { + Dbprintf("!!! crc mismatch: expected %x but got %x !!!", + LegicCRC(byte_index, current_frame.data & 0xff, cmd_sz), current_frame.data >> 8); + return -1; + } + + return byte; +} + +/* legic_write_byte() is not included, however it's trivial to implement + * and here are some hints on what remains to be done: + * + * * assemble a write_cmd_frame with crc and send it + * * wait until the tag sends back an ACK ('1' bit unencrypted) + * * forward the prng based on the timing + */ +int legic_write_byte(int byte, int addr, int addr_sz) { + //do not write UID, CRC, DCF + if(addr <= 0x06) { + return 0; + } + + //== send write command ============================== + crc_clear(&legic_crc); + crc_update(&legic_crc, 0, 1); /* CMD_WRITE */ + crc_update(&legic_crc, addr, addr_sz); + crc_update(&legic_crc, byte, 8); + + uint32_t crc = crc_finish(&legic_crc); + uint32_t cmd = ((crc <<(addr_sz+1+8)) //CRC + |(byte <<(addr_sz+1)) //Data + |(addr <<1) //Address + |(0x00 <<0)); //CMD = W + uint32_t cmd_sz = addr_sz+1+8+4; //crc+data+cmd + + legic_prng_forward(2); /* we wait anyways */ + while(timer->TC_CV < 387) ; /* ~ 258us */ + frame_send_rwd(cmd, cmd_sz); + + //== wait for ack ==================================== + int t, old_level=0, edges=0; + int next_bit_at =0; + while(timer->TC_CV < 387) ; /* ~ 258us */ + for(t=0; t<80; t++) { + edges = 0; + next_bit_at += TAG_TIME_BIT; + while(timer->TC_CV < next_bit_at) { + int level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + if(level != old_level) { + edges++; } + old_level = level; + } + if(edges > 20 && edges < 60) { /* expected are 42 edges */ + int t = timer->TC_CV; + int c = t/TAG_TIME_BIT; + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + legic_prng_forward(c); + return 0; + } + } + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1) ; /* Wait till the clock has reset */ + return -1; +} + +int LegicRfReader(int offset, int bytes) { + int byte_index=0, cmd_sz=0, card_sz=0; + + LegicCommonInit(); + + memset(BigBuf, 0, 1024); + + DbpString("setting up legic card"); + uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV); + switch_off_tag_rwd(); //we lose to mutch time with dprintf + switch(tag_type) { + case 0x1d: + DbpString("MIM 256 card found, reading card ..."); + cmd_sz = 9; + card_sz = 256; + break; + case 0x3d: + DbpString("MIM 1024 card found, reading card ..."); + cmd_sz = 11; + card_sz = 1024; + break; + default: + Dbprintf("Unknown card format: %x",tag_type); + return -1; + } + if(bytes == -1) { + bytes = card_sz; + } + if(bytes+offset >= card_sz) { + bytes = card_sz-offset; + } + + perform_setup_phase_rwd(SESSION_IV); + + LED_B_ON(); + while(byte_index < bytes) { + int r = legic_read_byte(byte_index+offset, cmd_sz); + if(r == -1 ||BUTTON_PRESS()) { + DbpString("operation aborted"); + switch_off_tag_rwd(); + LED_B_OFF(); + LED_C_OFF(); + return -1; } - - if(time >= (BIT_TIME_1+2*BIT_TIME_FUZZ) && active) { - /* Frame end */ - emit(-1); - active = 0; - } - - if(time >= (20*BIT_TIME_1) && (AT91C_BASE_TC1->TC_SR & AT91C_TC_CLKSTA)) { - AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; + ((uint8_t*)BigBuf)[byte_index] = r; + WDT_HIT(); + byte_index++; + if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF(); + } + LED_B_OFF(); + LED_C_OFF(); + switch_off_tag_rwd(); + Dbprintf("Card read, use 'hf legic decode' or"); + Dbprintf("'data hexsamples %d' to view results", (bytes+7) & ~7); + return 0; +} + +void LegicRfWriter(int bytes, int offset) { + int byte_index=0, addr_sz=0; + + LegicCommonInit(); + + DbpString("setting up legic card"); + uint32_t tag_type = perform_setup_phase_rwd(SESSION_IV); + switch_off_tag_rwd(); + switch(tag_type) { + case 0x1d: + if(offset+bytes > 0x100) { + Dbprintf("Error: can not write to 0x%03.3x on MIM 256", offset+bytes); + return; + } + addr_sz = 8; + Dbprintf("MIM 256 card found, writing 0x%02.2x - 0x%02.2x ...", offset, offset+bytes); + break; + case 0x3d: + if(offset+bytes > 0x400) { + Dbprintf("Error: can not write to 0x%03.3x on MIM 1024", offset+bytes); + return; + } + addr_sz = 10; + Dbprintf("MIM 1024 card found, writing 0x%03.3x - 0x%03.3x ...", offset, offset+bytes); + break; + default: + Dbprintf("No or unknown card found, aborting"); + return; + } + + LED_B_ON(); + perform_setup_phase_rwd(SESSION_IV); + legic_prng_forward(2); + while(byte_index < bytes) { + int r = legic_write_byte(((uint8_t*)BigBuf)[byte_index+offset], byte_index+offset, addr_sz); + if((r != 0) || BUTTON_PRESS()) { + Dbprintf("operation aborted @ 0x%03.3x", byte_index); + switch_off_tag_rwd(); + LED_B_OFF(); + LED_C_OFF(); + return; } - - - old_level = level; - WDT_HIT(); + WDT_HIT(); + byte_index++; + if(byte_index & 0x10) LED_C_ON(); else LED_C_OFF(); } + LED_B_OFF(); + LED_C_OFF(); + DbpString("write successful"); +} + +int timestamp; + +/* Handle (whether to respond) a frame in tag mode */ +static void frame_handle_tag(struct legic_frame const * const f) +{ + /* First Part of Handshake (IV) */ + if(f->bits == 7) { + if(f->data == SESSION_IV) { + LED_C_ON(); + prng_timer->TC_CCR = AT91C_TC_SWTRG; + legic_prng_init(f->data); + frame_send_tag(0x3d, 6, 1); /* 0x3d^0x26 = 0x1b */ + legic_state = STATE_IV; + legic_read_count = 0; + legic_prng_bc = 0; + legic_prng_iv = f->data; + + /* TIMEOUT */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1); + while(timer->TC_CV < 280); + return; + } else if((prng_timer->TC_CV % 50) > 40) { + legic_prng_init(f->data); + frame_send_tag(0x3d, 6, 1); + SpinDelay(20); + return; + } + } + + /* 0x19==??? */ + if(legic_state == STATE_IV) { + if((f->bits == 6) && (f->data == (0x19 ^ get_key_stream(1, 6)))) { + legic_state = STATE_CON; + + /* TIMEOUT */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1); + while(timer->TC_CV < 200); + return; + } else { + legic_state = STATE_DISCON; + LED_C_OFF(); + Dbprintf("0x19 - Frame: %03.3x", f->data); + return; + } + } + + /* Read */ + if(f->bits == 11) { + if(legic_state == STATE_CON) { + int key = get_key_stream(-1, 11); //legic_phase_drift, 11); + int addr = f->data ^ key; addr = addr >> 1; + int data = ((uint8_t*)BigBuf)[addr]; + int hash = LegicCRC(addr, data, 11) << 8; + ((uint8_t*)BigBuf)[OFFSET_LOG+legic_read_count] = (uint8_t)addr; + legic_read_count++; + + //Dbprintf("Data:%03.3x, key:%03.3x, addr: %03.3x, read_c:%u", f->data, key, addr, read_c); + legic_prng_forward(legic_reqresp_drift); + + frame_send_tag(hash | data, 12, 1); + + /* SHORT TIMEOUT */ + timer->TC_CCR = AT91C_TC_SWTRG; + while(timer->TC_CV > 1); + legic_prng_forward(legic_frame_drift); + while(timer->TC_CV < 180); + return; + } + } + + /* Write */ + if(f->bits == 23) { + int key = get_key_stream(-1, 23); //legic_frame_drift, 23); + int addr = f->data ^ key; addr = addr >> 1; addr = addr & 0x3ff; + int data = f->data ^ key; data = data >> 11; data = data & 0xff; + + /* write command */ + legic_state = STATE_DISCON; + LED_C_OFF(); + Dbprintf("write - addr: %x, data: %x", addr, data); + return; + } + + if(legic_state != STATE_DISCON) { + Dbprintf("Unexpected: sz:%u, Data:%03.3x, State:%u, Count:%u", f->bits, f->data, legic_state, legic_read_count); + int i; + Dbprintf("IV: %03.3x", legic_prng_iv); + for(i = 0; iPIO_ODR = GPIO_SSC_DIN; + AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; + + setup_timer(); + crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0); + + int old_level = 0; + int active = 0; + legic_state = STATE_DISCON; + + LED_B_ON(); + DbpString("Starting Legic emulator, press button to end"); + while(!BUTTON_PRESS()) { + int level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); + int time = timer->TC_CV; + + if(level != old_level) { + if(level == 1) { + timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG; + if(FUZZ_EQUAL(time, RWD_TIME_1, RWD_TIME_FUZZ)) { + /* 1 bit */ + emit(1); + active = 1; + LED_A_ON(); + } else if(FUZZ_EQUAL(time, RWD_TIME_0, RWD_TIME_FUZZ)) { + /* 0 bit */ + emit(0); + active = 1; + LED_A_ON(); + } else if(active) { + /* invalid */ + emit(-1); + active = 0; + LED_A_OFF(); + } + } + } + + if(time >= (RWD_TIME_1+RWD_TIME_FUZZ) && active) { + /* Frame end */ + emit(-1); + active = 0; + LED_A_OFF(); + } + + if(time >= (20*RWD_TIME_1) && (timer->TC_SR & AT91C_TC_CLKSTA)) { + timer->TC_CCR = AT91C_TC_CLKDIS; + } + + old_level = level; + WDT_HIT(); + } + DbpString("Stopped"); + LED_B_OFF(); + LED_A_OFF(); + LED_C_OFF(); } +