X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/b67f7ec359806293a6da14208bad56b842dedb60..a1ff338bd5023bac02d51e1de5ca70fbdb90d3bf:/common/protocols.h?ds=inline diff --git a/common/protocols.h b/common/protocols.h index af165c3a..9de72661 100644 --- a/common/protocols.h +++ b/common/protocols.h @@ -99,32 +99,60 @@ NXP/Philips CUSTOM COMMANDS #define ICLASS_CMD_CHECK 0x05 #define ICLASS_CMD_DETECT 0x0F #define ICLASS_CMD_HALT 0x00 -#define ICLASS_CMD_UPDATE 0x87 +#define ICLASS_CMD_UPDATE 0x87 #define ICLASS_CMD_ACT 0x8E #define ICLASS_CMD_READ4 0x06 #define ISO14443A_CMD_REQA 0x26 -#define ISO14443A_CMD_READBLOCK 0x30 #define ISO14443A_CMD_WUPA 0x52 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 -#define ISO14443A_CMD_WRITEBLOCK 0xA0 // or 0xA2 ? +#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97 #define ISO14443A_CMD_HALT 0x50 #define ISO14443A_CMD_RATS 0xE0 -#define MIFARE_AUTH_KEYA 0x60 -#define MIFARE_AUTH_KEYB 0x61 -#define MIFARE_MAGICMODE 0x40 -#define MIFARE_CMD_INC 0xC0 -#define MIFARE_CMD_DEC 0xC1 -#define MIFARE_CMD_RESTORE 0xC2 -#define MIFARE_CMD_TRANSFER 0xB0 +#define MIFARE_CMD_READBLOCK 0x30 +#define MIFARE_CMD_WRITEBLOCK 0xA0 +#define MIFARE_AUTH_KEYA 0x60 +#define MIFARE_AUTH_KEYB 0x61 +#define MIFARE_MAGICWUPC1 0x40 +#define MIFARE_MAGICWUPC2 0x43 +#define MIFARE_MAGICWIPEC 0x41 +#define MIFARE_CMD_INC 0xC0 +#define MIFARE_CMD_DEC 0xC1 +#define MIFARE_CMD_RESTORE 0xC2 +#define MIFARE_CMD_TRANSFER 0xB0 -#define MIFARE_ULC_WRITE 0xA0 -#define MIFARE_ULC_AUTH_1 0x1A +#define MIFARE_EV1_PERSONAL_UID 0x40 +#define MIFARE_EV1_UIDF0 0x00 +#define MIFARE_EV1_UIDF1 0x40 +#define MIFARE_EV1_UIDF2 0x20 +#define MIFARE_EV1_UIDF3 0x60 +#define MIFARE_EV1_SETMODE 0x43 + +#define MIFARE_ULC_WRITE 0xA2 +#define MIFARE_ULC_COMP_WRITE MIFARE_CMD_WRITEBLOCK +#define MIFARE_ULC_AUTH_1 0x1A #define MIFARE_ULC_AUTH_2 0xAF +#define MIFARE_ULEV1_AUTH 0x1B +#define MIFARE_ULEV1_VERSION 0x60 +#define MIFARE_ULEV1_FASTREAD 0x3A +#define MIFARE_ULEV1_WRITE 0xA2 +#define MIFARE_ULEV1_COMP_WRITE MIFARE_CMD_WRITEBLOCK +#define MIFARE_ULEV1_READ_CNT 0x39 +#define MIFARE_ULEV1_INCR_CNT 0xA5 +#define MIFARE_ULEV1_READSIG 0x3C +#define MIFARE_ULEV1_CHECKTEAR 0x3E +#define MIFARE_ULEV1_VCSL 0x4B + +// mifare 4bit card answers +#define CARD_ACK 0x0A // 1010 - ACK +#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed) +#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error + + /** 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) @@ -148,27 +176,220 @@ NXP/Philips CUSTOM COMMANDS #define ISO14443B_COMPLETION 0x0F #define ISO14443B_AUTHENTICATE 0x0A -//First byte is 26 -#define ISO15693_INVENTORY 0x01 -#define ISO15693_STAYQUIET 0x02 -//First byte is 02 -#define ISO15693_READBLOCK 0x20 -#define ISO15693_WRITEBLOCK 0x21 -#define ISO15693_LOCKBLOCK 0x22 -#define ISO15693_READ_MULTI_BLOCK 0x23 -#define ISO15693_SELECT 0x25 -#define ISO15693_RESET_TO_READY 0x26 -#define ISO15693_WRITE_AFI 0x27 -#define ISO15693_LOCK_AFI 0x28 -#define ISO15693_WRITE_DSFID 0x29 -#define ISO15693_LOCK_DSFID 0x2A -#define ISO15693_GET_SYSTEM_INFO 0x2B -#define ISO15693_READ_MULTI_SECSTATUS 0x2C - - -#define ISO_14443A 0 -#define ICLASS 1 -#define ISO_14443B 2 - - -#endif // PROTOCOLS_H +// ISO15693 COMMANDS +#define ISO15693_INVENTORY 0x01 +#define ISO15693_STAYQUIET 0x02 +#define ISO15693_READBLOCK 0x20 +#define ISO15693_WRITEBLOCK 0x21 +#define ISO15693_LOCKBLOCK 0x22 +#define ISO15693_READ_MULTI_BLOCK 0x23 +#define ISO15693_SELECT 0x25 +#define ISO15693_RESET_TO_READY 0x26 +#define ISO15693_WRITE_AFI 0x27 +#define ISO15693_LOCK_AFI 0x28 +#define ISO15693_WRITE_DSFID 0x29 +#define ISO15693_LOCK_DSFID 0x2A +#define ISO15693_GET_SYSTEM_INFO 0x2B +#define ISO15693_READ_MULTI_SECSTATUS 0x2C + +// ISO15693 REQUEST FLAGS +#define ISO15693_REQ_SUBCARRIER_TWO (1<<0) +#define ISO15693_REQ_DATARATE_HIGH (1<<1) +#define ISO15693_REQ_INVENTORY (1<<2) +#define ISO15693_REQ_PROTOCOL_EXT (1<<3) // RFU +#define ISO15693_REQ_OPTION (1<<6) // Command specific option selector +// when REQ_INVENTORY is not set +#define ISO15693_REQ_SELECT (1<<4) // only selected cards response +#define ISO15693_REQ_ADDRESS (1<<5) // this req contains an address +// when REQ_INVENTORY is set +#define ISO15693_REQINV_AFI (1<<4) // AFI Field is present +#define ISO15693_REQINV_SLOT1 (1<<5) // 1 Slot (16 slots if not set) + +// ISO15693 RESPONSE FLAGS +#define ISO15693_RES_ERROR (1<<0) +#define ISO15693_RES_EXT (1<<3) // Protocol Extention + +// ISO15693 RESPONSE ERROR CODES +#define ISO15693_NOERROR 0x00 +#define ISO15693_ERROR_CMD_NOT_SUP 0x01 // Command not supported +#define ISO15693_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error) +#define ISO15693_ERROR_CMD_OPTION 0x03 // Command option not supported +#define ISO15693_ERROR_GENERIC 0x0F // No additional Info about this error +#define ISO15693_ERROR_BLOCK_UNAVAILABLE 0x10 +#define ISO15693_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again +#define ISO15693_ERROR_BLOCK_LOCKED 0x12 // cannot be changed +#define ISO15693_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful +#define ISO15693_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful + + +// Topaz command set: +#define TOPAZ_REQA 0x26 // Request +#define TOPAZ_WUPA 0x52 // WakeUp +#define TOPAZ_RID 0x78 // Read ID +#define TOPAZ_RALL 0x00 // Read All (all bytes) +#define TOPAZ_READ 0x01 // Read (a single byte) +#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte) +#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte) +// additional commands for Dynamic Memory Model +#define TOPAZ_RSEG 0x10 // Read segment +#define TOPAZ_READ8 0x02 // Read (eight bytes) +#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes) +#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) + +// HITAG1 commands +#define HITAG1_SET_CCNEW 0xC2 // left 5 bits only +#define HITAG1_READ_ID 0x00 // not a real command, consists of 5 bits length, bits partial SN, 8 bits CRC +#define HITAG1_SELECT 0x00 // left 5 bits only, followed by 32 bits SN and 8 bits CRC +#define HITAG1_WRPPAGE 0x80 // left 4 bits only, followed by 8 bits page and 8 bits CRC +#define HITAG1_WRPBLK 0x90 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_WRCPAGE 0xA0 // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC +#define HITAG1_WRCBLK 0xB0 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_RDPPAGE 0xC0 // left 4 bits only, followed by 8 bits page and 8 bits CRC +#define HITAG1_RDPBLK 0xD0 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_RDCPAGE 0xE0 // left 4 bits only, followed by 8 bits page and 8 bits CRC +#define HITAG1_RDCBLK 0xF0 // left 4 bits only, followed by 8 bits block and 8 bits CRC +#define HITAG1_HALT 0x70 // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC + +// HITAG2 commands +#define HITAG2_START_AUTH 0xC0 // left 5 bits only +#define HITAG2_READ_PAGE 0xC0 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits +#define HITAG2_READ_PAGE_INVERTED 0x44 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits +#define HITAG2_WRITE_PAGE 0x82 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits +#define HITAG2_HALT 0x00 // left 5 bits only + +#define ISO_14443A 0 +#define ICLASS 1 +#define ISO_14443B 2 +#define TOPAZ 3 +#define PROTO_MIFARE 4 +#define ISO_7816_4 5 +#define ISO_15693 6 +#define ISO_14443_4 7 + + +//-- Picopass fuses +#define FUSE_FPERS 0x80 +#define FUSE_CODING1 0x40 +#define FUSE_CODING0 0x20 +#define FUSE_CRYPT1 0x10 +#define FUSE_CRYPT0 0x08 +#define FUSE_FPROD1 0x04 +#define FUSE_FPROD0 0x02 +#define FUSE_RA 0x01 + +// ISO 7816-4 Basic interindustry commands. For command APDU's. +#define ISO7816_ERASE_BINARY 0x0E +#define ISO7816_VERIFY 0x20 +#define ISO7816_MANAGE_CHANNEL 0x70 +#define ISO7816_EXTERNAL_AUTHENTICATE 0x82 +#define ISO7816_GET_CHALLENGE 0x84 +#define ISO7816_INTERNAL_AUTHENTICATE 0x88 +#define ISO7816_SELECT_FILE 0xA4 +#define ISO7816_GET_PROCESSING_OPTIONS 0xA8 +#define ISO7816_READ_BINARY 0xB0 +#define ISO7816_READ_RECORDS 0xB2 +#define ISO7816_GET_RESPONSE 0xC0 +#define ISO7816_ENVELOPE 0xC2 +#define ISO7816_GET_DATA 0xCA +#define ISO7816_WRITE_BINARY 0xD0 +#define ISO7816_WRITE_RECORD 0xD2 +#define ISO7816_UPDATE_BINARY 0xD6 +#define ISO7816_PUT_DATA 0xDA +#define ISO7816_UPDATE_DATA 0xDC +#define ISO7816_APPEND_RECORD 0xE2 +// ISO7816-4 For response APDU's +#define ISO7816_OK 0x9000 +// 6x xx = ERROR +#define ISO7816_MAX_FRAME_SIZE 261 + + + +void printIclassDumpInfo(uint8_t* iclass_dump); +void getMemConfig(uint8_t mem_cfg, uint8_t chip_cfg, uint8_t *max_blk, uint8_t *app_areas, uint8_t *kb); + +/* T55x7 configuration register definitions */ +#define T55x7_POR_DELAY 0x00000001 +#define T55x7_ST_TERMINATOR 0x00000008 +#define T55x7_PWD 0x00000010 +#define T55x7_MAXBLOCK_SHIFT 5 +#define T55x7_AOR 0x00000200 +#define T55x7_PSKCF_RF_2 0 +#define T55x7_PSKCF_RF_4 0x00000400 +#define T55x7_PSKCF_RF_8 0x00000800 +#define T55x7_MODULATION_DIRECT 0 +#define T55x7_MODULATION_PSK1 0x00001000 +#define T55x7_MODULATION_PSK2 0x00002000 +#define T55x7_MODULATION_PSK3 0x00003000 +#define T55x7_MODULATION_FSK1 0x00004000 +#define T55x7_MODULATION_FSK2 0x00005000 +#define T55x7_MODULATION_FSK1a 0x00006000 +#define T55x7_MODULATION_FSK2a 0x00007000 +#define T55x7_MODULATION_MANCHESTER 0x00008000 +#define T55x7_MODULATION_BIPHASE 0x00010000 +#define T55x7_MODULATION_DIPHASE 0x00018000 +#define T55x7_X_MODE 0x00020000 +#define T55x7_BITRATE_RF_8 0 +#define T55x7_BITRATE_RF_16 0x00040000 +#define T55x7_BITRATE_RF_32 0x00080000 +#define T55x7_BITRATE_RF_40 0x000C0000 +#define T55x7_BITRATE_RF_50 0x00100000 +#define T55x7_BITRATE_RF_64 0x00140000 +#define T55x7_BITRATE_RF_100 0x00180000 +#define T55x7_BITRATE_RF_128 0x001C0000 + +/* T5555 (Q5) configuration register definitions */ +#define T5555_ST_TERMINATOR 0x00000001 +#define T5555_MAXBLOCK_SHIFT 0x00000001 +#define T5555_MODULATION_MANCHESTER 0 +#define T5555_MODULATION_PSK1 0x00000010 +#define T5555_MODULATION_PSK2 0x00000020 +#define T5555_MODULATION_PSK3 0x00000030 +#define T5555_MODULATION_FSK1 0x00000040 +#define T5555_MODULATION_FSK2 0x00000050 +#define T5555_MODULATION_BIPHASE 0x00000060 +#define T5555_MODULATION_DIRECT 0x00000070 +#define T5555_INVERT_OUTPUT 0x00000080 +#define T5555_PSK_RF_2 0 +#define T5555_PSK_RF_4 0x00000100 +#define T5555_PSK_RF_8 0x00000200 +#define T5555_USE_PWD 0x00000400 +#define T5555_USE_AOR 0x00000800 +#define T5555_SET_BITRATE(x) (((x-2)/2)<<12) +#define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2) +#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2 +#define T5555_FAST_WRITE 0x00004000 +#define T5555_PAGE_SELECT 0x00008000 + +#define T55XX_WRITE_TIMEOUT 1500 + +uint32_t GetT55xxClockBit(uint32_t clock); + +// em4x05 & em4x69 chip configuration register definitions +#define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2) +#define EM4x05_SET_BITRATE(x) ((x-2)/2) +#define EM4x05_MODULATION_NRZ 0x00000000 +#define EM4x05_MODULATION_MANCHESTER 0x00000040 +#define EM4x05_MODULATION_BIPHASE 0x00000080 +#define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips +#define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips +#define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips +#define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips +#define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips +#define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips +#define EM4x05_PSK_RF_2 0 +#define EM4x05_PSK_RF_4 0x00000400 +#define EM4x05_PSK_RF_8 0x00000800 +#define EM4x05_MAXBLOCK_SHIFT 14 +#define EM4x05_FIRST_USER_BLOCK 5 +#define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode +#define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1) +#define EM4x05_READ_LOGIN_REQ 1<<18 +#define EM4x05_READ_HK_LOGIN_REQ 1<<19 +#define EM4x05_WRITE_LOGIN_REQ 1<<20 +#define EM4x05_WRITE_HK_LOGIN_REQ 1<<21 +#define EM4x05_READ_AFTER_WRITE 1<<22 +#define EM4x05_DISABLE_ALLOWED 1<<23 +#define EM4x05_READER_TALK_FIRST 1<<24 + +#endif +// PROTOCOLS_H