X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/bc9393715faea086a5275664cc12c628c7d49d4e..d1e197e9ec44affdf3ad9ef0ea6a221d0c30aa6d:/armsrc/iso14443a.c?ds=sidebyside diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c index c40254b7..7c0913d8 100644 --- a/armsrc/iso14443a.c +++ b/armsrc/iso14443a.c @@ -9,19 +9,7 @@ //----------------------------------------------------------------------------- // Routines to support ISO 14443 type A. //----------------------------------------------------------------------------- - -#include "proxmark3.h" -#include "apps.h" -#include "util.h" -#include "string.h" -#include "cmd.h" -#include "iso14443crc.h" #include "iso14443a.h" -#include "iso14443b.h" -#include "crapto1.h" -#include "mifareutil.h" -#include "BigBuf.h" -#include "parity.h" static uint32_t iso14a_timeout; int rsamples = 0; @@ -551,7 +539,10 @@ void RAMFUNC SniffIso14443a(uint8_t param) { UartInit(receivedCmd, receivedCmdPar); // Setup and start DMA. - FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } // We won't start recording the frames that we acquire until we trigger; // a good trigger condition to get started is probably when we see a @@ -854,13 +845,10 @@ bool prepare_allocated_tag_modulation(tag_response_info_t* response_info) { //----------------------------------------------------------------------------- // Main loop of simulated tag: receive commands from reader, decide what // response to send, and send it. +// 'hf 14a sim' //----------------------------------------------------------------------------- void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { - //Here, we collect CUID, NT, NR, AR, CUID, NT2, NR2, AR2 - // This can be used in a reader-only attack. - uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0,0}; - uint8_t ar_nr_collected = 0; uint8_t sak = 0; uint32_t cuid = 0; uint32_t nonce = 0; @@ -872,6 +860,24 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { // The first response contains the ATQA (note: bytes are transmitted in reverse order). uint8_t response1[] = {0,0}; + + // Here, we collect CUID, block1, keytype1, NT1, NR1, AR1, CUID, block2, keytyp2, NT2, NR2, AR2 + // it should also collect block, keytype. + uint8_t cardAUTHSC = 0; + uint8_t cardAUTHKEY = 0xff; // no authentication + // allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys + #define ATTACK_KEY_COUNT 8 // keep same as define in cmdhfmf.c -> readerAttack() + nonces_t ar_nr_resp[ATTACK_KEY_COUNT*2]; // for 2 separate attack types (nml, moebius) + memset(ar_nr_resp, 0x00, sizeof(ar_nr_resp)); + + uint8_t ar_nr_collected[ATTACK_KEY_COUNT*2]; // for 2nd attack type (moebius) + memset(ar_nr_collected, 0x00, sizeof(ar_nr_collected)); + uint8_t nonce1_count = 0; + uint8_t nonce2_count = 0; + uint8_t moebius_n_count = 0; + bool gettingMoebius = false; + uint8_t mM = 0; // moebius_modifier for collection storage + switch (tagType) { case 1: { // MIFARE Classic 1k @@ -912,8 +918,8 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { uint16_t start = 4 * (0+12); uint8_t emdata[8]; emlGetMemBt( emdata, start, sizeof(emdata)); - memcpy(data, emdata, 3); //uid bytes 0-2 - memcpy(data+3, emdata+4, 4); //uid bytes 3-7 + memcpy(data, emdata, 3); // uid bytes 0-2 + memcpy(data+3, emdata+4, 4); // uid bytes 3-7 flags |= FLAG_7B_UID_IN_DATA; } } break; @@ -978,10 +984,10 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { nonce = bytes_to_num(response5, 4); // Prepare GET_VERSION (different for UL EV-1 / NTAG) - //uint8_t response7_EV1[] = {0x00, 0x04, 0x03, 0x01, 0x01, 0x00, 0x0b, 0x03, 0xfd, 0xf7}; //EV1 48bytes VERSION. - //uint8_t response7_NTAG[] = {0x00, 0x04, 0x04, 0x02, 0x01, 0x00, 0x11, 0x03, 0x01, 0x9e}; //NTAG 215 + // uint8_t response7_EV1[] = {0x00, 0x04, 0x03, 0x01, 0x01, 0x00, 0x0b, 0x03, 0xfd, 0xf7}; //EV1 48bytes VERSION. + // uint8_t response7_NTAG[] = {0x00, 0x04, 0x04, 0x02, 0x01, 0x00, 0x11, 0x03, 0x01, 0x9e}; //NTAG 215 // Prepare CHK_TEARING - //uint8_t response9[] = {0xBD,0x90,0x3f}; + // uint8_t response9[] = {0xBD,0x90,0x3f}; #define TAG_RESPONSE_COUNT 10 tag_response_info_t responses[TAG_RESPONSE_COUNT] = { @@ -995,8 +1001,8 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { { .response = response8, .response_n = sizeof(response8) } // EV1/NTAG PACK response }; - //{ .response = response7_NTAG, .response_n = sizeof(response7_NTAG)}, // EV1/NTAG GET_VERSION response - //{ .response = response9, .response_n = sizeof(response9) } // EV1/NTAG CHK_TEAR response + // { .response = response7_NTAG, .response_n = sizeof(response7_NTAG)}, // EV1/NTAG GET_VERSION response + // { .response = response9, .response_n = sizeof(response9) } // EV1/NTAG CHK_TEAR response // Allocate 512 bytes for the dynamic modulation, created when the reader queries for it @@ -1075,23 +1081,27 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { uint8_t block = receivedCmd[1]; // if Ultralight or NTAG (4 byte blocks) if ( tagType == 7 || tagType == 2 ) { - //first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] + // first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] uint16_t start = 4 * (block+12); - uint8_t emdata[MAX_MIFARE_FRAME_SIZE]; - emlGetMemBt( emdata, start, 16); - AppendCrc14443a(emdata, 16); - EmSendCmdEx(emdata, sizeof(emdata), false); + uint8_t emdata[MAX_MIFARE_FRAME_SIZE]; + emlGetMemBt( emdata, start, 16); + AppendCrc14443a(emdata, 16); + EmSendCmdEx(emdata, sizeof(emdata), false); // We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below p_response = NULL; } else { // all other tags (16 byte block tags) - EmSendCmdEx(data+(4*receivedCmd[1]),16,false); + uint8_t emdata[MAX_MIFARE_FRAME_SIZE]; + emlGetMemBt( emdata, block, 16); + AppendCrc14443a(emdata, 16); + EmSendCmdEx(emdata, sizeof(emdata), false); + // EmSendCmdEx(data+(4*receivedCmd[1]),16,false); // Dbprintf("Read request from reader: %x %x",receivedCmd[0],receivedCmd[1]); // We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below p_response = NULL; } } else if(receivedCmd[0] == MIFARE_ULEV1_FASTREAD) { // Received a FAST READ (ranged read) uint8_t emdata[MAX_FRAME_SIZE]; - //first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] + // first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] int start = (receivedCmd[1]+12) * 4; int len = (receivedCmd[2] - receivedCmd[1] + 1) * 4; emlGetMemBt( emdata, start, len); @@ -1099,7 +1109,7 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { EmSendCmdEx(emdata, len+2, false); p_response = NULL; } else if(receivedCmd[0] == MIFARE_ULEV1_READSIG && tagType == 7) { // Received a READ SIGNATURE -- - //first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] + // first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] uint16_t start = 4 * 4; uint8_t emdata[34]; emlGetMemBt( emdata, start, 32); @@ -1126,7 +1136,7 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { EmSendCmdEx(ack,sizeof(ack),false); p_response = NULL; } else if(receivedCmd[0] == MIFARE_ULEV1_CHECKTEAR && tagType == 7) { // Received a CHECK_TEARING_EVENT -- - //first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] + // first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature] uint8_t emdata[3]; uint8_t counter=0; if (receivedCmd[1]<3) counter = receivedCmd[1]; @@ -1137,15 +1147,16 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { } else if(receivedCmd[0] == ISO14443A_CMD_HALT) { // Received a HALT LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, TRUE); p_response = NULL; - } else if(receivedCmd[0] == MIFARE_AUTH_KEYA || receivedCmd[0] == MIFARE_AUTH_KEYB) { // Received an authentication request - + } else if(receivedCmd[0] == MIFARE_AUTH_KEYA || receivedCmd[0] == MIFARE_AUTH_KEYB) { // Received an authentication request if ( tagType == 7 ) { // IF NTAG /EV1 0x60 == GET_VERSION, not a authentication request. uint8_t emdata[10]; emlGetMemBt( emdata, 0, 8 ); AppendCrc14443a(emdata, sizeof(emdata)-2); - EmSendCmdEx(emdata, sizeof(emdata), false); + EmSendCmdEx(emdata, sizeof(emdata), false); p_response = NULL; } else { + cardAUTHSC = receivedCmd[1] / 4; // received block num + cardAUTHKEY = receivedCmd[0] - 0x60; p_response = &responses[5]; order = 7; } } else if(receivedCmd[0] == ISO14443A_CMD_RATS) { // Received a RATS request @@ -1160,41 +1171,73 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { uint32_t nr = bytes_to_num(receivedCmd,4); uint32_t ar = bytes_to_num(receivedCmd+4,4); + // Collect AR/NR per keytype & sector if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) { - if(ar_nr_collected < 2){ - // Avoid duplicates... probably not necessary, nr should vary. - // nr doesn't change in pm3's reading etc. its fixed. - //if(ar_nr_responses[3] != nr){ - ar_nr_responses[ar_nr_collected*4] = cuid; - ar_nr_responses[ar_nr_collected*4+1] = nonce; - ar_nr_responses[ar_nr_collected*4+2] = nr; - ar_nr_responses[ar_nr_collected*4+3] = ar; - ar_nr_collected++; - //} - } - - if(ar_nr_collected > 1 ) { - if (MF_DBGLEVEL >= 2 && !(flags & FLAG_INTERACTIVE)) { - Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); - Dbprintf("../tools/mfkey/mfkey32 %08x %08x %08x %08x %08x %08x", - ar_nr_responses[0], // CUID - ar_nr_responses[1], // NT - ar_nr_responses[2], // AR1 - ar_nr_responses[3], // NR1 - ar_nr_responses[6], // AR2 - ar_nr_responses[7] // NR2 - ); + for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { + if ( ar_nr_collected[i+mM]==0 || ((cardAUTHSC == ar_nr_resp[i+mM].sector) && (cardAUTHKEY == ar_nr_resp[i+mM].keytype) && (ar_nr_collected[i+mM] > 0)) ) { + // if first auth for sector, or matches sector and keytype of previous auth + if (ar_nr_collected[i+mM] < 2) { + // if we haven't already collected 2 nonces for this sector + if (ar_nr_resp[ar_nr_collected[i+mM]].ar != ar) { + // Avoid duplicates... probably not necessary, ar should vary. + if (ar_nr_collected[i+mM]==0) { + // first nonce collect + ar_nr_resp[i+mM].cuid = cuid; + ar_nr_resp[i+mM].sector = cardAUTHSC; + ar_nr_resp[i+mM].keytype = cardAUTHKEY; + ar_nr_resp[i+mM].nonce = nonce; + ar_nr_resp[i+mM].nr = nr; + ar_nr_resp[i+mM].ar = ar; + nonce1_count++; + // add this nonce to first moebius nonce + ar_nr_resp[i+ATTACK_KEY_COUNT].cuid = cuid; + ar_nr_resp[i+ATTACK_KEY_COUNT].sector = cardAUTHSC; + ar_nr_resp[i+ATTACK_KEY_COUNT].keytype = cardAUTHKEY; + ar_nr_resp[i+ATTACK_KEY_COUNT].nonce = nonce; + ar_nr_resp[i+ATTACK_KEY_COUNT].nr = nr; + ar_nr_resp[i+ATTACK_KEY_COUNT].ar = ar; + ar_nr_collected[i+ATTACK_KEY_COUNT]++; + } else { // second nonce collect (std and moebius) + ar_nr_resp[i+mM].nonce2 = nonce; + ar_nr_resp[i+mM].nr2 = nr; + ar_nr_resp[i+mM].ar2 = ar; + if (!gettingMoebius) { + nonce2_count++; + // check if this was the last second nonce we need for std attack + if ( nonce2_count == nonce1_count ) { + // done collecting std test switch to moebius + // first finish incrementing last sample + ar_nr_collected[i+mM]++; + // switch to moebius collection + gettingMoebius = true; + mM = ATTACK_KEY_COUNT; + break; + } + } else { + moebius_n_count++; + // if we've collected all the nonces we need - finish. + if (nonce1_count == moebius_n_count) { + cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_resp,sizeof(ar_nr_resp)); + nonce1_count = 0; + nonce2_count = 0; + moebius_n_count = 0; + gettingMoebius = false; + } + } + } + ar_nr_collected[i+mM]++; + } + } + // we found right spot for this nonce stop looking + break; + } } - uint8_t len = ar_nr_collected*4*4; - cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len); - ar_nr_collected = 0; - memset(ar_nr_responses, 0x00, len); } - } + } else if (receivedCmd[0] == MIFARE_ULC_AUTH_1 ) { // ULC authentication, or Desfire Authentication } else if (receivedCmd[0] == MIFARE_ULEV1_AUTH) { // NTAG / EV-1 authentication if ( tagType == 7 ) { - uint16_t start = 13; //first 4 blocks of emu are [getversion answer - check tearing - pack - 0x00] + uint16_t start = 13; // first 4 blocks of emu are [getversion answer - check tearing - pack - 0x00] uint8_t emdata[4]; emlGetMemBt( emdata, start, 2); AppendCrc14443a(emdata, 2); @@ -1317,6 +1360,36 @@ void SimulateIso14443aTag(int tagType, int flags, byte_t* data) { BigBuf_free_keep_EM(); LED_A_OFF(); + if(flags & FLAG_NR_AR_ATTACK && MF_DBGLEVEL >= 1) { + for ( uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { + if (ar_nr_collected[i] == 2) { + Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i= 4){ Dbprintf("-[ Wake ups after halt [%d]", happened); Dbprintf("-[ Messages after halt [%d]", happened2); @@ -1398,8 +1471,7 @@ static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing //----------------------------------------------------------------------------- // Prepare reader command (in bits, support short frames) to send to FPGA //----------------------------------------------------------------------------- -void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity) -{ +void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity) { int i, j; int last = 0; uint8_t b; @@ -1572,7 +1644,7 @@ int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen, bool correctionNeeded) { b = AT91C_BASE_SSC->SSC_RHR; (void) b; // wait for the FPGA to signal fdt_indicator == 1 (the FPGA is ready to queue new data in its delay line) - for (uint16_t j = 0; j < 5; j++) { // allow timeout - better late than never + for (uint8_t j = 0; j < 5; j++) { // allow timeout - better late than never while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY)); if (AT91C_BASE_SSC->SSC_RHR) break; } @@ -1716,14 +1788,12 @@ static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receive } void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing) { + CodeIso14443aBitsAsReaderPar(frame, bits, par); - // Send command to tag TransmitFor14443a(ToSend, ToSendMax, timing); if(trigger) LED_A_ON(); - // Log reader command in trace buffer - //LogTrace(frame, nbytes(bits), LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_READER, (LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_READER, par, TRUE); LogTrace(frame, nbytes(bits), (LastTimeProxToAirStart<<4) + DELAY_ARM2AIR_AS_READER, ((LastTimeProxToAirStart + LastProxToAirDuration)<<4) + DELAY_ARM2AIR_AS_READER, par, TRUE); } @@ -1732,17 +1802,17 @@ void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *tim } void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing) { - // Generate parity and redirect - uint8_t par[MAX_PARITY_SIZE] = {0x00}; - GetParity(frame, len/8, par); - ReaderTransmitBitsPar(frame, len, par, timing); + // Generate parity and redirect + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(frame, len/8, par); + ReaderTransmitBitsPar(frame, len, par, timing); } void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing) { - // Generate parity and redirect - uint8_t par[MAX_PARITY_SIZE] = {0x00}; - GetParity(frame, len, par); - ReaderTransmitBitsPar(frame, len*8, par, timing); + // Generate parity and redirect + uint8_t par[MAX_PARITY_SIZE] = {0x00}; + GetParity(frame, len, par); + ReaderTransmitBitsPar(frame, len*8, par, timing); } int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t *parity) { @@ -1765,10 +1835,10 @@ int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity) { // if anticollision is false, then the UID must be provided in uid_ptr[] // and num_cascades must be set (1: 4 Byte UID, 2: 7 Byte UID, 3: 10 Byte UID) int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, uint32_t *cuid_ptr, bool anticollision, uint8_t num_cascades) { - uint8_t wupa[] = { 0x52 }; // 0x26 - REQA 0x52 - WAKE-UP - uint8_t sel_all[] = { 0x93,0x20 }; - uint8_t sel_uid[] = { 0x93,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; - uint8_t rats[] = { 0xE0,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0 + uint8_t wupa[] = { ISO14443A_CMD_WUPA }; // 0x26 - ISO14443A_CMD_REQA 0x52 - ISO14443A_CMD_WUPA + uint8_t sel_all[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x20 }; + uint8_t sel_uid[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; + uint8_t rats[] = { ISO14443A_CMD_RATS,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0 uint8_t resp[MAX_FRAME_SIZE] = {0}; // theoretically. A usual RATS will be much smaller uint8_t resp_par[MAX_PARITY_SIZE] = {0}; byte_t uid_resp[4] = {0}; @@ -1796,6 +1866,9 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u memset(uid_ptr,0,10); } + // reset the PCB block number + iso14_pcb_blocknum = 0; + // check for proprietary anticollision: if ((resp[0] & 0x1F) == 0) return 3; @@ -1907,41 +1980,37 @@ int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_hi14a_card, u p_hi14a_card->ats_len = len; } - // reset the PCB block number - iso14_pcb_blocknum = 0; - // set default timeout based on ATS iso14a_set_ATS_timeout(resp); - return 1; } void iso14443a_setup(uint8_t fpga_minor_mode) { + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); // Set up the synchronous serial port FpgaSetupSsc(); // connect Demodulated Signal to ADC: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | fpga_minor_mode); - LED_D_OFF(); // Signal field is on with the appropriate LED if (fpga_minor_mode == FPGA_HF_ISO14443A_READER_MOD || fpga_minor_mode == FPGA_HF_ISO14443A_READER_LISTEN) LED_D_ON(); - // Prepare the demodulation functions - DemodReset(); - UartReset(); - - iso14a_set_timeout(10*106); // 10ms default + FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | fpga_minor_mode); - //NextTransferTime = 2 * DELAY_ARM2AIR_AS_READER; - NextTransferTime = DELAY_ARM2AIR_AS_READER << 1; + SpinDelay(20); // Start the timer StartCountSspClk(); + + // Prepare the demodulation functions + DemodReset(); + UartReset(); + NextTransferTime = 2 * DELAY_ARM2AIR_AS_READER; + iso14a_set_timeout(10*106); // 20ms default } int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { @@ -1974,9 +2043,9 @@ int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, void *data) { return len; } + //----------------------------------------------------------------------------- // Read an ISO 14443a tag. Send out commands and store answers. -// //----------------------------------------------------------------------------- void ReaderIso14443a(UsbCommand *c) { iso14a_command_t param = c->arg[0]; @@ -2072,29 +2141,29 @@ int32_t dist_nt(uint32_t nt1, uint32_t nt2) { if (nt1 == nt2) return 0; - uint16_t i; uint32_t nttmp1 = nt1; uint32_t nttmp2 = nt2; - for (i = 1; i < (32768/8); ++i) { + // 0xFFFF -- Half up and half down to find distance between nonces + for (uint16_t i = 1; i < 32768/8; i += 8) { nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -i; - nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+1; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+1); nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+2; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+2); nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+3; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+3); nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+4; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+4); nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+5; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+5); nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+6; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+6); nttmp1 = prng_successor(nttmp1, 1); if (nttmp1 == nt2) return i+7; - nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+7); - } + + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -i; + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+1); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+2); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+3); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+4); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+5); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+6); + nttmp2 = prng_successor(nttmp2, 1); if (nttmp2 == nt1) return -(i+7); + } // either nt1 or nt2 are invalid nonces return(-99999); } @@ -2105,8 +2174,10 @@ int32_t dist_nt(uint32_t nt1, uint32_t nt2) { // Cloning MiFare Classic Rail and Building Passes, Anywhere, Anytime" // (article by Nicolas T. Courtois, 2009) //----------------------------------------------------------------------------- -void ReaderMifare(bool first_try, uint8_t block ) { - uint8_t mf_auth[] = { MIFARE_AUTH_KEYA, block, 0x00, 0x00 }; + +void ReaderMifare(bool first_try, uint8_t block, uint8_t keytype ) { + + uint8_t mf_auth[] = { keytype, block, 0x00, 0x00 }; uint8_t mf_nr_ar[] = { 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; uint8_t uid[10] = {0,0,0,0,0,0,0,0,0,0}; uint8_t par_list[8] = {0,0,0,0,0,0,0,0}; @@ -2139,19 +2210,22 @@ void ReaderMifare(bool first_try, uint8_t block ) { #define PRNG_SEQUENCE_LENGTH (1 << 16) #define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up. #define MAX_SYNC_TRIES 32 - + + AppendCrc14443a(mf_auth, 2); + BigBuf_free(); BigBuf_Clear_ext(false); clear_trace(); - set_tracing(TRUE); + set_tracing(FALSE); iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD); - AppendCrc14443a(mf_auth, 2); + sync_time = GetCountSspClk() & 0xfffffff8; + sync_cycles = PRNG_SEQUENCE_LENGTH; // Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces). + nt_attacked = 0; - if (first_try) { - sync_time = GetCountSspClk() & 0xfffffff8; - sync_cycles = PRNG_SEQUENCE_LENGTH + 1130; //65536; //0x10000 // Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces). - mf_nr_ar3 = 0; - nt_attacked = 0; + if (MF_DBGLEVEL >= 4) Dbprintf("Mifare::Sync %08x", sync_time); + + if (first_try) { + mf_nr_ar3 = 0; par_low = 0; } else { // we were unsuccessful on a previous call. @@ -2220,9 +2294,9 @@ void ReaderMifare(bool first_try, uint8_t block ) { // Transmit reader nonce with fake par ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL); - WDT_HIT(); - LED_B_ON(); - if (first_try && previous_nt && !nt_attacked) { // we didn't calibrate our clock yet + // we didn't calibrate our clock yet, + // iceman: has to be calibrated every time. + if (previous_nt && !nt_attacked) { nt_distance = dist_nt(previous_nt, nt); @@ -2261,7 +2335,7 @@ void ReaderMifare(bool first_try, uint8_t block ) { } LED_B_OFF(); - if ((nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again... + if ( (nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again... catch_up_cycles = ABS(dist_nt(nt_attacked, nt)); if (catch_up_cycles == 99999) { // invalid nonce received. Don't resync on that one. @@ -2351,6 +2425,7 @@ void ReaderMifare(bool first_try, uint8_t block ) { set_tracing(FALSE); } + /** *MIFARE 1K simulate. * @@ -2381,7 +2456,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * struct Crypto1State mpcs = {0, 0}; struct Crypto1State *pcs; pcs = &mpcs; - uint32_t numReads = 0; //Counts numer of times reader read a block + uint32_t numReads = 0; // Counts numer of times reader read a block uint8_t receivedCmd[MAX_MIFARE_FRAME_SIZE] = {0x00}; uint8_t receivedCmd_par[MAX_MIFARE_PARITY_SIZE] = {0x00}; uint8_t response[MAX_MIFARE_FRAME_SIZE] = {0x00}; @@ -2391,26 +2466,34 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint8_t sak_4[] = {0x0C, 0x00, 0x00}; // CL1 - 4b uid uint8_t sak_7[] = {0x0C, 0x00, 0x00}; // CL2 - 7b uid uint8_t sak_10[] = {0x0C, 0x00, 0x00}; // CL3 - 10b uid - //uint8_t sak[] = {0x09, 0x3f, 0xcc }; // Mifare Mini + // uint8_t sak[] = {0x09, 0x3f, 0xcc }; // Mifare Mini uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; uint8_t rUIDBCC3[] = {0xde, 0xad, 0xbe, 0xaf, 0x62}; uint8_t rAUTH_NT[] = {0x01, 0x01, 0x01, 0x01}; // very random nonce - //uint8_t rAUTH_NT[] = {0x55, 0x41, 0x49, 0x92};// nonce from nested? why this? + // uint8_t rAUTH_NT[] = {0x55, 0x41, 0x49, 0x92};// nonce from nested? why this? uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00}; // Here, we collect CUID, NT, NR, AR, CUID2, NT2, NR2, AR2 // This can be used in a reader-only attack. - uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0,0}; - uint8_t ar_nr_collected = 0; + nonces_t ar_nr_resp[ATTACK_KEY_COUNT*2]; // for 2 separate attack types (nml, moebius) + memset(ar_nr_resp, 0x00, sizeof(ar_nr_resp)); + + uint8_t ar_nr_collected[ATTACK_KEY_COUNT*2]; // for 2nd attack type (moebius) + memset(ar_nr_collected, 0x00, sizeof(ar_nr_collected)); + uint8_t nonce1_count = 0; + uint8_t nonce2_count = 0; + uint8_t moebius_n_count = 0; + bool gettingMoebius = false; + uint8_t mM = 0; // moebius_modifier for collection storage + bool doBufResetNext = false; // Authenticate response - nonce uint32_t nonce = bytes_to_num(rAUTH_NT, 4); - ar_nr_responses[1] = nonce; - //-- Determine the UID + // -- Determine the UID // Can be set from emulator memory or incoming data // Length: 4,7,or 10 bytes if ( (flags & FLAG_UID_IN_EMUL) == FLAG_UID_IN_EMUL) @@ -2434,7 +2517,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * case 4: sak_4[0] &= 0xFB; // save CUID - ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC1, 4); + cuid = bytes_to_num(rUIDBCC1, 4); // BCC rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3]; if (MF_DBGLEVEL >= 2) { @@ -2450,7 +2533,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * atqa[0] |= 0x40; sak_7[0] &= 0xFB; // save CUID - ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC2, 4); + cuid = bytes_to_num(rUIDBCC2, 4); // CascadeTag, CT rUIDBCC1[0] = 0x88; // BCC @@ -2472,7 +2555,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * atqa[0] |= 0x80; sak_10[0] &= 0xFB; // save CUID - ar_nr_responses[0] = cuid = bytes_to_num(rUIDBCC3, 4); + cuid = bytes_to_num(rUIDBCC3, 4); // CascadeTag, CT rUIDBCC1[0] = 0x88; rUIDBCC2[0] = 0x88; @@ -2526,17 +2609,18 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } if (cardSTATE == MFEMUL_NOFIELD) continue; - //Now, get data + // Now, get data res = EmGetCmd(receivedCmd, &len, receivedCmd_par); if (res == 2) { //Field is off! cardSTATE = MFEMUL_NOFIELD; LEDsoff(); continue; } else if (res == 1) { - break; //return value 1 means button press + break; // return value 1 means button press } // REQ or WUP request in ANY state and WUP in HALTED state + // this if-statement doesn't match the specification above. (iceman) if (len == 1 && ((receivedCmd[0] == ISO14443A_CMD_REQA && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == ISO14443A_CMD_WUPA)) { selTimer = GetTickCount(); EmSendCmdEx(atqa, sizeof(atqa), (receivedCmd[0] == ISO14443A_CMD_WUPA)); @@ -2649,21 +2733,96 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * uint32_t nr = bytes_to_num(receivedCmd, 4); uint32_t ar = bytes_to_num(&receivedCmd[4], 4); - //Collect AR/NR - //if(ar_nr_collected < 2 && cardAUTHSC == 2){ + if (doBufResetNext) { + // Reset, lets try again! + Dbprintf("Re-read after previous NR_AR_ATTACK, resetting buffer"); + memset(ar_nr_resp, 0x00, sizeof(ar_nr_resp)); + memset(ar_nr_collected, 0x00, sizeof(ar_nr_collected)); + mM = 0; + doBufResetNext = false; + } + + for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { + if ( ar_nr_collected[i+mM]==0 || ((cardAUTHSC == ar_nr_resp[i+mM].sector) && (cardAUTHKEY == ar_nr_resp[i+mM].keytype) && (ar_nr_collected[i+mM] > 0)) ) { + + // if first auth for sector, or matches sector and keytype of previous auth + if (ar_nr_collected[i+mM] < 2) { + // if we haven't already collected 2 nonces for this sector + if (ar_nr_resp[ar_nr_collected[i+mM]].ar != ar) { + // Avoid duplicates... probably not necessary, ar should vary. + if (ar_nr_collected[i+mM]==0) { + // first nonce collect + ar_nr_resp[i+mM].cuid = cuid; + ar_nr_resp[i+mM].sector = cardAUTHSC; + ar_nr_resp[i+mM].keytype = cardAUTHKEY; + ar_nr_resp[i+mM].nonce = nonce; + ar_nr_resp[i+mM].nr = nr; + ar_nr_resp[i+mM].ar = ar; + nonce1_count++; + // add this nonce to first moebius nonce + ar_nr_resp[i+ATTACK_KEY_COUNT].cuid = cuid; + ar_nr_resp[i+ATTACK_KEY_COUNT].sector = cardAUTHSC; + ar_nr_resp[i+ATTACK_KEY_COUNT].keytype = cardAUTHKEY; + ar_nr_resp[i+ATTACK_KEY_COUNT].nonce = nonce; + ar_nr_resp[i+ATTACK_KEY_COUNT].nr = nr; + ar_nr_resp[i+ATTACK_KEY_COUNT].ar = ar; + ar_nr_collected[i+ATTACK_KEY_COUNT]++; + } else { // second nonce collect (std and moebius) + ar_nr_resp[i+mM].nonce2 = nonce; + ar_nr_resp[i+mM].nr2 = nr; + ar_nr_resp[i+mM].ar2 = ar; + if (!gettingMoebius) { + nonce2_count++; + // check if this was the last second nonce we need for std attack + if ( nonce2_count == nonce1_count ) { + // done collecting std test switch to moebius + // first finish incrementing last sample + ar_nr_collected[i+mM]++; + // switch to moebius collection + gettingMoebius = true; + mM = ATTACK_KEY_COUNT; + break; + } + } else { + moebius_n_count++; + // if we've collected all the nonces we need - finish. + + if (nonce1_count == moebius_n_count) { + cmd_send(CMD_ACK,CMD_SIMULATE_MIFARE_CARD,0,0,&ar_nr_resp,sizeof(ar_nr_resp)); + nonce1_count = 0; + nonce2_count = 0; + moebius_n_count = 0; + gettingMoebius = false; + doBufResetNext = true; + finished = ( ((flags & FLAG_INTERACTIVE) == FLAG_INTERACTIVE)); + } + } + } + ar_nr_collected[i+mM]++; + } + } + // we found right spot for this nonce stop looking + break; + } + } + + + /* + // Collect AR/NR + // if(ar_nr_collected < 2 && cardAUTHSC == 2){ if(ar_nr_collected < 2) { - //if(ar_nr_responses[2] != nr) { + // if(ar_nr_responses[2] != nr) { ar_nr_responses[ar_nr_collected*4] = cuid; ar_nr_responses[ar_nr_collected*4+1] = nonce; ar_nr_responses[ar_nr_collected*4+2] = nr; ar_nr_responses[ar_nr_collected*4+3] = ar; ar_nr_collected++; - //} + // } // Interactive mode flag, means we need to send ACK finished = ( ((flags & FLAG_INTERACTIVE) == FLAG_INTERACTIVE)&& ar_nr_collected == 2); } - /* + crypto1_word(pcs, ar , 1); cardRr = nr ^ crypto1_word(pcs, 0, 0); @@ -2719,7 +2878,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * if (!encrypted_data) { // first authentication - crypto1_word(pcs, cuid ^ nonce, 0);//Update crypto state + crypto1_word(pcs, cuid ^ nonce, 0);// Update crypto state num_to_bytes(nonce, 4, rAUTH_AT); // Send nonce if (MF_DBGLEVEL >= 4) Dbprintf("Reader authenticating for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY ); @@ -2898,37 +3057,45 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t * } // Interactive mode flag, means we need to send ACK + /* if((flags & FLAG_INTERACTIVE) == FLAG_INTERACTIVE) { - //May just aswell send the collected ar_nr in the response aswell + // May just aswell send the collected ar_nr in the response aswell uint8_t len = ar_nr_collected * 4 * 4; cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, len, 0, &ar_nr_responses, len); } - + + */ if( ((flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) && MF_DBGLEVEL >= 1 ) { - if(ar_nr_collected > 1 ) { - Dbprintf("Collected two pairs of AR/NR which can be used to extract keys from reader:"); - Dbprintf("../tools/mfkey/mfkey32v2.exe %08x %08x %08x %08x %08x %08x %08x", - ar_nr_responses[0], // CUID - ar_nr_responses[1], // NT1 - ar_nr_responses[2], // NR1 - ar_nr_responses[3], // AR1 - //ar_nr_responses[4], // CUID2 - ar_nr_responses[5], // NT2 - ar_nr_responses[6], // NR2 - ar_nr_responses[7] // AR2 - ); - } else { - Dbprintf("Failed to obtain two AR/NR pairs!"); - if(ar_nr_collected == 1 ) { - Dbprintf("Only got these: UID=%08x, nonce=%08x, NR1=%08x, AR1=%08x", - ar_nr_responses[0], // CUID - ar_nr_responses[1], // NT - ar_nr_responses[2], // NR1 - ar_nr_responses[3] // AR1 - ); + for ( uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) { + if (ar_nr_collected[i] == 2) { + Dbprintf("Collected two pairs of AR/NR which can be used to extract %s from reader for sector %d:", (i= 1) Dbprintf("Emulator stopped. Tracing: %d trace length: %d ", tracing, BigBuf_get_traceLen()); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); @@ -2978,8 +3145,12 @@ void RAMFUNC SniffMifare(uint8_t param) { // Set up the demodulator for the reader -> tag commands UartInit(receivedCmd, receivedCmdPar); - // set transfer address and number of bytes. Start transfer. - FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); + // Setup and start DMA. + // set transfer address and number of bytes. Start transfer. + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } LED_D_OFF(); @@ -3006,7 +3177,11 @@ void RAMFUNC SniffMifare(uint8_t param) { maxDataLen = 0; ReaderIsActive = FALSE; TagIsActive = FALSE; - FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE); // set transfer address and number of bytes. Start transfer. + // Setup and start DMA. set transfer address and number of bytes. Start transfer. + if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){ + if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + return; + } } }