X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/bde10a5057cb280e5f08365502ec4a3f79301863..06732632308cb40fba0cde7ad87bf455a2d42e50:/armsrc/hitag2.c diff --git a/armsrc/hitag2.c b/armsrc/hitag2.c index 59f29eae..7d6668eb 100644 --- a/armsrc/hitag2.c +++ b/armsrc/hitag2.c @@ -16,10 +16,10 @@ // (c) 2012 Roel Verdult //----------------------------------------------------------------------------- -#include "proxmark3.h" +#include "../include/proxmark3.h" #include "apps.h" #include "util.h" -#include "hitag2.h" +#include "../include/hitag2.h" #include "string.h" static bool bQuiet; @@ -27,6 +27,31 @@ static bool bQuiet; bool bCrypto; bool bAuthenticating; bool bPwd; +bool bSuccessful; + +int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int bReader) +{ + // Return when trace is full + if (traceLen >= TRACE_SIZE) return FALSE; + + // Trace the random, i'm curious + rsamples += iSamples; + trace[traceLen++] = ((rsamples >> 0) & 0xff); + trace[traceLen++] = ((rsamples >> 8) & 0xff); + trace[traceLen++] = ((rsamples >> 16) & 0xff); + trace[traceLen++] = ((rsamples >> 24) & 0xff); + if (!bReader) { + trace[traceLen - 1] |= 0x80; + } + trace[traceLen++] = ((dwParity >> 0) & 0xff); + trace[traceLen++] = ((dwParity >> 8) & 0xff); + trace[traceLen++] = ((dwParity >> 16) & 0xff); + trace[traceLen++] = ((dwParity >> 24) & 0xff); + trace[traceLen++] = iBits; + memcpy(trace + traceLen, btBytes, nbytes(iBits)); + traceLen += nbytes(iBits); + return TRUE; +} struct hitag2_tag { uint32_t uid; @@ -152,10 +177,6 @@ static u32 _hitag2_byte (u64 * x) return c; } -size_t nbytes(size_t nbits) { - return (nbits/8)+((nbits%8)>0); -} - int hitag2_reset(void) { tag.state = TAG_STATE_RESET; @@ -398,8 +419,8 @@ void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, si break; } -// LogTrace(rx,nbytes(rxlen),0,0,false); -// LogTrace(tx,nbytes(*txlen),0,0,true); +// LogTraceHitag(rx,rxlen,0,0,false); +// LogTraceHitag(tx,*txlen,0,0,true); if(tag.crypto_active) { hitag2_cipher_transcrypt(&(tag.cs), tx, *txlen/8, *txlen%8); @@ -477,16 +498,26 @@ bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) *txlen = 32; memcpy(tx,password,4); bPwd = true; - } else { - if (blocknr > 7) { - DbpString("Read succesful!"); - // We are done... for now - return false; - } - *txlen = 10; - tx[0] = 0xc0 | (blocknr << 3) | ((blocknr^7) >> 2); - tx[1] = ((blocknr^7) << 6); + memcpy(tag.sectors[blocknr],rx,4); blocknr++; + } else { + + if(blocknr == 1){ + //store password in block1, the TAG answers with Block3, but we need the password in memory + memcpy(tag.sectors[blocknr],tx,4); + }else{ + memcpy(tag.sectors[blocknr],rx,4); + } + + blocknr++; + if (blocknr > 7) { + DbpString("Read succesful!"); + bSuccessful = true; + return false; + } + *txlen = 10; + tx[0] = 0xc0 | (blocknr << 3) | ((blocknr^7) >> 2); + tx[1] = ((blocknr^7) << 6); } } break; @@ -513,11 +544,32 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { case 0: { // Stop if there is no answer while we are in crypto mode (after sending NrAr) if (bCrypto) { - DbpString("Authentication failed!"); - return false; - } - *txlen = 5; - memcpy(tx,"\xc0",nbytes(*txlen)); + // Failed during authentication + if (bAuthenticating) { + DbpString("Authentication failed!"); + return false; + } else { + // Failed reading a block, could be (read/write) locked, skip block and re-authenticate + if (blocknr == 1) { + // Write the low part of the key in memory + memcpy(tag.sectors[1],key+2,4); + } else if (blocknr == 2) { + // Write the high part of the key in memory + tag.sectors[2][0] = 0x00; + tag.sectors[2][1] = 0x00; + tag.sectors[2][2] = key[0]; + tag.sectors[2][3] = key[1]; + } else { + // Just put zero's in the memory (of the unreadable block) + memset(tag.sectors[blocknr],0x00,4); + } + blocknr++; + bCrypto = false; + } + } else { + *txlen = 5; + memcpy(tx,"\xc0",nbytes(*txlen)); + } } break; // Received UID, crypto tag answer @@ -543,7 +595,7 @@ bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) { } if (blocknr > 7) { DbpString("Read succesful!"); - // We are done... for now + bSuccessful = true; return false; } *txlen = 10; @@ -621,12 +673,19 @@ bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_ case 0: { // Stop if there is no answer while we are in crypto mode (after sending NrAr) if (bCrypto) { - Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]); + Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]); + + // Removing failed entry from authentiations table + memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8); + auth_table_len -= 8; + + // Return if we reached the end of the authentiactions table bCrypto = false; - if ((auth_table_pos+8) == auth_table_len) { + if (auth_table_pos == auth_table_len) { return false; } - auth_table_pos += 8; + + // Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry) memcpy(NrAr,auth_table+auth_table_pos,8); } *txlen = 5; @@ -684,6 +743,7 @@ void SnoopHitag(uint32_t type) { // Set up eavesdropping mode, frequency divisor which will drive the FPGA // and analog mux selection. + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz SetAdcMuxFor(GPIO_MUXSEL_LOPKD); @@ -821,7 +881,7 @@ void SnoopHitag(uint32_t type) { // Check if frame was captured if(rxlen > 0) { frame_count++; - if (!LogTrace(rx,nbytes(rxlen),response,0,reader_frame)) { + if (!LogTraceHitag(rx,rxlen,response,0,reader_frame)) { DbpString("Trace full"); break; } @@ -907,6 +967,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { // Set up simulator mode, frequency divisor which will drive the FPGA // and analog mux selection. + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz SetAdcMuxFor(GPIO_MUXSEL_LOPKD); @@ -984,7 +1045,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { if(rxlen > 4) { frame_count++; if (!bQuiet) { - if (!LogTrace(rx,nbytes(rxlen),response,0,true)) { + if (!LogTraceHitag(rx,rxlen,response,0,true)) { DbpString("Trace full"); if (bQuitTraceFull) { break; @@ -1013,7 +1074,7 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) { hitag_send_frame(tx,txlen); // Store the frame in the trace if (!bQuiet) { - if (!LogTrace(tx,nbytes(txlen),0,0,false)) { + if (!LogTraceHitag(tx,txlen,0,0,false)) { DbpString("Trace full"); if (bQuitTraceFull) { break; @@ -1064,7 +1125,11 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { int t_wait = HITAG_T_WAIT_MAX; bool bStop; bool bQuitTraceFull = false; - + + FpgaDownloadAndGo(FPGA_BITSTREAM_LF); + // Reset the return status + bSuccessful = false; + // Clean up trace and prepare it for storing frames iso14a_set_tracing(TRUE); iso14a_clear_trace(); @@ -1162,26 +1227,26 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { lastbit = 1; bStop = false; - // Tag specific configuration settings (sof, timings, etc.) - if (htf < 10){ - // hitagS settings - reset_sof = 1; - t_wait = 200; - DbpString("Configured for hitagS reader"); - } else if (htf < 20) { - // hitag1 settings - reset_sof = 1; - t_wait = 200; - DbpString("Configured for hitag1 reader"); - } else if (htf < 30) { - // hitag2 settings - reset_sof = 4; - t_wait = HITAG_T_WAIT_2; - DbpString("Configured for hitag2 reader"); + // Tag specific configuration settings (sof, timings, etc.) + if (htf < 10){ + // hitagS settings + reset_sof = 1; + t_wait = 200; + DbpString("Configured for hitagS reader"); + } else if (htf < 20) { + // hitag1 settings + reset_sof = 1; + t_wait = 200; + DbpString("Configured for hitag1 reader"); + } else if (htf < 30) { + // hitag2 settings + reset_sof = 4; + t_wait = HITAG_T_WAIT_2; + DbpString("Configured for hitag2 reader"); } else { - Dbprintf("Error, unknown hitag reader type: %d",htf); - return; - } + Dbprintf("Error, unknown hitag reader type: %d",htf); + return; + } while(!bStop && !BUTTON_PRESS()) { // Watchdog hit @@ -1191,7 +1256,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { if(rxlen > 0) { frame_count++; if (!bQuiet) { - if (!LogTrace(rx,nbytes(rxlen),response,0,false)) { + if (!LogTraceHitag(rx,rxlen,response,0,false)) { DbpString("Trace full"); if (bQuitTraceFull) { break; @@ -1245,7 +1310,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { frame_count++; if (!bQuiet) { // Store the frame in the trace - if (!LogTrace(tx,nbytes(txlen),HITAG_T_WAIT_2,0,true)) { + if (!LogTraceHitag(tx,txlen,HITAG_T_WAIT_2,0,true)) { if (bQuitTraceFull) { break; } else { @@ -1326,7 +1391,7 @@ void ReaderHitag(hitag_function htf, hitag_data* htd) { AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS; AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); - -// Dbprintf("frame received: %d",frame_count); -// DbpString("All done"); + Dbprintf("frame received: %d",frame_count); + DbpString("All done"); + cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48); }