X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/bfb01844fb0ce48e960374c3bc6ecf208b6c6bb0..c54dff4f4ac42536ebd6faf32c7a76ebffdaadae:/armsrc/appmain.c

diff --git a/armsrc/appmain.c b/armsrc/appmain.c
index 99776a98..48c9caef 100644
--- a/armsrc/appmain.c
+++ b/armsrc/appmain.c
@@ -301,39 +301,42 @@ void SendVersion(void)
 
 // measure the USB Speed by sending SpeedTestBufferSize bytes to client and measuring the elapsed time.
 // Note: this mimics GetFromBigbuf(), i.e. we have the overhead of the UsbCommand structure included.
-void printUSBSpeed(uint32_t SpeedTestBufferSize) 
+void printUSBSpeed(void) 
 {
 	Dbprintf("USB Speed:");
-	Dbprintf("  Sending %d bytes payload...", SpeedTestBufferSize);
+	Dbprintf("  Sending USB packets to client...");
 
+	#define USB_SPEED_TEST_MIN_TIME	1500	// in milliseconds
 	uint8_t *test_data = BigBuf_get_addr();
+	uint32_t end_time;
 
-	uint32_t start_time = GetTickCount();
-
+	uint32_t start_time = end_time = GetTickCount();
+	uint32_t bytes_transferred = 0;
+	
 	LED_B_ON();
-	for(size_t i=0; i<SpeedTestBufferSize; i += USB_CMD_DATA_SIZE) {
-		size_t len = MIN((SpeedTestBufferSize - i), USB_CMD_DATA_SIZE);
-		cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K,0,len,0,test_data,len);
+	while(end_time < start_time + USB_SPEED_TEST_MIN_TIME) {
+		cmd_send(CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K, 0, USB_CMD_DATA_SIZE, 0, test_data, USB_CMD_DATA_SIZE);
+		end_time = GetTickCount();
+		bytes_transferred += USB_CMD_DATA_SIZE;
 	}
 	LED_B_OFF();
 
-	uint32_t end_time = GetTickCount();
-
-	Dbprintf("  Time elapsed: %dms, USB Transfer Speed PM3 -> Client = %d Bytes/s", 
-		end_time - start_time,
-		1000* SpeedTestBufferSize / (end_time - start_time));
+	Dbprintf("  Time elapsed:      %dms", end_time - start_time);
+	Dbprintf("  Bytes transferred: %d", bytes_transferred);
+	Dbprintf("  USB Transfer Speed PM3 -> Client = %d Bytes/s", 
+		1000 * bytes_transferred / (end_time - start_time));
 
 }
 	
 /**
   * Prints runtime information about the PM3.
 **/
-void SendStatus(uint32_t SpeedTestBufferSize)
+void SendStatus(void)
 {
 	BigBuf_print_status();
 	Fpga_print_status();
 	printConfig(); //LF Sampling config
-	printUSBSpeed(SpeedTestBufferSize);
+	printUSBSpeed();
 	Dbprintf("Various");
 	Dbprintf("  MF_DBGLEVEL......%d", MF_DBGLEVEL);
 	Dbprintf("  ToSendMax........%d",ToSendMax);
@@ -984,6 +987,9 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			ReadPCF7931();
 			cmd_send(CMD_ACK,0,0,0,0,0);
 			break;
+		case CMD_PCF7931_WRITE:
+			WritePCF7931(c->d.asDwords[0],c->d.asDwords[1],c->d.asDwords[2],c->d.asDwords[3],c->d.asDwords[4],c->d.asDwords[5],c->d.asDwords[6], c->d.asDwords[9], c->d.asDwords[7]-128,c->d.asDwords[8]-128, c->arg[0], c->arg[1], c->arg[2]);
+			break;
 		case CMD_EM4X_READ_WORD:
 			EM4xReadWord(c->arg[1], c->arg[2],c->d.asBytes[0]);
 			break;
@@ -1172,11 +1178,29 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			ReaderIClass(c->arg[0]);
 			break;
 		case CMD_READER_ICLASS_REPLAY:
-		    ReaderIClass_Replay(c->arg[0], c->d.asBytes);
+			ReaderIClass_Replay(c->arg[0], c->d.asBytes);
 			break;
-	case CMD_ICLASS_EML_MEMSET:
+		case CMD_ICLASS_EML_MEMSET:
 			emlSet(c->d.asBytes,c->arg[0], c->arg[1]);
 			break;
+		case CMD_ICLASS_WRITEBLOCK:
+			iClass_WriteBlock(c->arg[0], c->d.asBytes);
+			break;
+		case CMD_ICLASS_READCHECK:  // auth step 1
+			iClass_ReadCheck(c->arg[0], c->arg[1]);
+			break;
+		case CMD_ICLASS_READBLOCK:
+			iClass_ReadBlk(c->arg[0]);
+			break;
+		case CMD_ICLASS_AUTHENTICATION: //check
+			iClass_Authentication(c->d.asBytes);
+			break;
+		case CMD_ICLASS_DUMP:
+			iClass_Dump(c->arg[0], c->arg[1]);
+			break;
+		case CMD_ICLASS_CLONE:
+			iClass_Clone(c->arg[0], c->arg[1], c->d.asBytes);
+			break;
 #endif
 
 		case CMD_BUFF_CLEAR:
@@ -1242,7 +1266,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			SendVersion();
 			break;
 		case CMD_STATUS:
-			SendStatus(c->arg[0]);
+			SendStatus();
 			break;
 		case CMD_PING:
 			cmd_send(CMD_ACK,0,0,0,0,0);