X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/c04a4b60cefc545641582da165c42b3023f5f753..bb04ef216debb8e5996dfe7acddf6af4413cb69a:/armsrc/mifarecmd.c diff --git a/armsrc/mifarecmd.c b/armsrc/mifarecmd.c index a3f0d374..edafe0a3 100644 --- a/armsrc/mifarecmd.c +++ b/armsrc/mifarecmd.c @@ -20,10 +20,6 @@ #include "parity.h" #include "crc.h" -#define AUTHENTICATION_TIMEOUT 848 // card times out 1ms after wrong authentication (according to NXP documentation) -#define PRE_AUTHENTICATION_LEADTIME 400 // some (non standard) cards need a pause after select before they are ready for first authentication - - // the block number for the ISO14443-4 PCB static uint8_t pcb_blocknum = 0; // Deselect card by sending a s-block. the crc is precalced for speed @@ -961,24 +957,14 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat // MIFARE check keys. key count up to 85. // //----------------------------------------------------------------------------- -void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) +void MifareChkKeys(uint16_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain) { uint8_t blockNo = arg0 & 0xff; uint8_t keyType = (arg0 >> 8) & 0xff; - bool clearTrace = arg1; + bool clearTrace = arg1 & 0x01; + bool multisectorCheck = arg1 & 0x02; + uint8_t set14aTimeout = (arg1 >> 8) & 0xff; uint8_t keyCount = arg2; - uint64_t ui64Key = 0; - - bool have_uid = false; - uint8_t cascade_levels = 0; - uint32_t timeout = 0; - int i; - byte_t isOK = 0; - uint8_t uid[10]; - uint32_t cuid; - struct Crypto1State mpcs = {0, 0}; - struct Crypto1State *pcs; - pcs = &mpcs; // clear debug level int OLD_MF_DBGLEVEL = MF_DBGLEVEL; @@ -992,53 +978,34 @@ void MifareChkKeys(uint16_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain) if (clearTrace) clear_trace(); set_tracing(true); - for (i = 0; i < keyCount; i++) { -// if(mifare_classic_halt(pcs, cuid)) { -// if (MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Halt error"); -// } + if (set14aTimeout){ + iso14a_set_timeout(set14aTimeout * 10); // timeout: ms = x/106 35-minimum, 50-OK 106-recommended 500-safe + } + + if (multisectorCheck) { + TKeyIndex keyIndex = {{0}}; + uint8_t sectorCnt = blockNo; + int res = MifareMultisectorChk(datain, keyCount, sectorCnt, keyType, OLD_MF_DBGLEVEL, &keyIndex); - // Iceman: use piwi's faster nonce collecting part in hardnested. - if (!have_uid) { // need a full select cycle to get the uid first - iso14a_card_select_t card_info; - if(!iso14443a_select_card(uid, &card_info, &cuid, true, 0, true)) { - if (OLD_MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Can't select card"); - --i; // try same key once again - continue; - } - switch (card_info.uidlen) { - case 4 : cascade_levels = 1; break; - case 7 : cascade_levels = 2; break; - case 10: cascade_levels = 3; break; - default: break; - } - have_uid = true; - } else { // no need for anticollision. We can directly select the card - if(!iso14443a_select_card(uid, NULL, NULL, false, cascade_levels, true)) { - if (OLD_MF_DBGLEVEL >= 1) Dbprintf("ChkKeys: Can't select card (UID)"); - --i; // try same key once again - continue; - } + LED_B_ON(); + if (res >= 0) { + cmd_send(CMD_ACK, 1, 0, 0, keyIndex, 80); + } else { + cmd_send(CMD_ACK, 0, 0, 0, NULL, 0); } - - ui64Key = bytes_to_num(datain + i * 6, 6); - if(mifare_classic_auth(pcs, cuid, blockNo, keyType, ui64Key, AUTH_FIRST)) { - uint8_t dummy_answer = 0; - ReaderTransmit(&dummy_answer, 1, NULL); - timeout = GetCountSspClk() + AUTHENTICATION_TIMEOUT; - - // wait for the card to become ready again - while(GetCountSspClk() < timeout); - continue; + LED_B_OFF(); + } else { + int res = MifareChkBlockKeys(datain, keyCount, blockNo, keyType, OLD_MF_DBGLEVEL); + + LED_B_ON(); + if (res > 0) { + cmd_send(CMD_ACK, 1, 0, 0, datain + (res - 1) * 6, 6); + } else { + cmd_send(CMD_ACK, 0, 0, 0, NULL, 0); } - - isOK = 1; - break; + LED_B_OFF(); } - LED_B_ON(); - cmd_send(CMD_ACK,isOK,0,0,datain + i * 6,6); - LED_B_OFF(); - FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); LEDsoff();