X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/c188b1b9b24b65a60c594364b474edba7c4ab8a2..efbf81da52dad2507cca6062d44272c397f93e4a:/client/cmdlft55xx.h

diff --git a/client/cmdlft55xx.h b/client/cmdlft55xx.h
index 77963fde..ff4f0e69 100644
--- a/client/cmdlft55xx.h
+++ b/client/cmdlft55xx.h
@@ -13,24 +13,62 @@
 // config blocks
 #define T55X7_DEFAULT_CONFIG_BLOCK      0x000880E8      // compat mode, data rate 32, manchester, ST, 7 data blocks
 #define T55X7_RAW_CONFIG_BLOCK          0x000880E0      // compat mode, data rate 32, manchester, 7 data blocks
-
 #define T55X7_EM_UNIQUE_CONFIG_BLOCK    0x00148040      // emulate em4x02/unique - compat mode, manchester, data rate 64, 2 data blocks
-
-
 // FDXB requires data inversion and BiPhase 57 is simply BipHase 50 inverted, so we can either do it using the modulation scheme or the inversion flag
 // we've done both below to prove that it works either way, and the modulation value for BiPhase 50 in the Atmel data sheet of binary "10001" (17) is a typo,
 // and it should actually be "10000" (16)
 // #define T55X7_FDXB_CONFIG_BLOCK         903F8080  // emulate fdx-b - xtended mode, BiPhase ('57), data rate 32, 4 data blocks
 #define T55X7_FDXB_CONFIG_BLOCK         0x903F0082  // emulate fdx-b - xtended mode, BiPhase ('50), invert data, data rate 32, 4 data blocks
 #define T55X7_HID_26_CONFIG_BLOCK       0x00107060  // hid 26 bit - compat mode, FSK2a, data rate 50, 3 data blocks
+#define T55X7_PYRAMID_CONFIG_BLOCK		0x00107080  // Pyramid 26 bit - compat mode, FSK2a, data rate 50, 4 data blocks
 #define T55X7_INDALA_64_CONFIG_BLOCK    0x00081040  // emulate indala 64 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 2
 #define T55X7_INDALA_224_CONFIG_BLOCK   0x000810E0  // emulate indala 224 bit - compat mode, PSK1, psk carrier FC * 2, data rate 32, maxblock 7
 #define T55X7_GUARDPROXII_CONFIG_BLOCK	0x00150060	// bitrate 64pcb, Direct modulation, Biphase, 3 data blocks
 #define T55X7_VIKING_CONFIG_BLOCK		0x00088040	// compat mode, data rate 32, Manchester, 2 data blocks
 #define T55X7_NORALYS_CONFIG_BLOCK		0x00088C6A	// compat mode,   (NORALYS - KCP3000)
 #define T55X7_IOPROX_CONFIG_BLOCK		0x00147040  // maxblock 2
+#define T55X7_PRESCO_CONFIG_BLOCK		0x00088088  // data rate 32, Manchester, 5 data blocks, STT
 #define T55X7_bin 0b0010
 
+#define T5555_DEFAULT_CONFIG_BLOCK		0x6001F004  // data rate 64 , ask, manchester, 2 data blocks?
+enum {
+	T55x7_RAW = 0x00,
+	T55x7_DEFAULT = 0x00,
+	T5555_DEFAULT = 0x01,
+	EM_UNIQUE  = 0x0,
+	FDBX = 0x02,
+	HID_26 = 0x03,
+	INDALA_64 = 0x04,
+	INDALA_224 = 0x05,
+	GUARDPROXXII = 0x06,
+	VIKING = 0x07,
+	NORALSYS = 0x08,
+	IOPROX = 0x09,
+} t55xx_tag;
+
+typedef struct {
+	uint32_t bl1;
+	uint32_t bl2; 
+	uint32_t acl; 
+	uint32_t mfc; 
+	uint32_t cid; 
+	uint32_t year; 
+	uint32_t quarter; 
+	uint32_t icr;
+	uint32_t lotid; 
+	uint32_t wafer; 
+	uint32_t dw;
+} t55x7_tracedata_t;
+
+typedef struct {
+	uint32_t bl1;
+	uint32_t bl2;
+	uint32_t icr;
+	char lotidc;
+	uint32_t lotid;
+	uint32_t wafer;
+	uint32_t dw;
+} t5555_tracedata_t;
 
 typedef struct {
 	enum {
@@ -61,11 +99,11 @@ typedef struct {
 		RF_128 = 0x07,
 	} bitrate;
 	bool Q5;
+	bool ST;
 } t55xx_conf_block_t;
 t55xx_conf_block_t Get_t55xx_Config();
 void Set_t55xx_Config(t55xx_conf_block_t conf);
 
-
 int CmdLFT55XX(const char *Cmd);
 int CmdT55xxSetConfig(const char *Cmd);
 int CmdT55xxReadBlock(const char *Cmd);
@@ -89,9 +127,14 @@ int printConfiguration( t55xx_conf_block_t b);
 
 bool DecodeT55xxBlock();
 bool tryDetectModulation();
+bool testKnownConfigBlock(uint32_t block0);
 bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);
 int special(const char *Cmd);
 int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );
 
 bool detectPassword(int password);
+
+void printT55x7Trace( t55x7_tracedata_t data, uint8_t repeat );
+void printT5555Trace( t5555_tracedata_t data, uint8_t repeat );
+
 #endif