X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/c2723575dedee5066c282f3428c43d4706ab8528..da8279796e4438b19442fad89c31b4955751877e:/armsrc/legicrf.c diff --git a/armsrc/legicrf.c b/armsrc/legicrf.c index a1b96b9a..f58cb442 100644 --- a/armsrc/legicrf.c +++ b/armsrc/legicrf.c @@ -69,7 +69,7 @@ static void setup_timer(void) { */ // At TIMER_CLOCK3 (MCK/32) -// testing calculating in (us) microseconds. +// testing calculating in ticks. 1.5ticks = 1us #define RWD_TIME_1 120 // READER_TIME_PAUSE 20us off, 80us on = 100us 80 * 1.5 == 120ticks #define RWD_TIME_0 60 // READER_TIME_PAUSE 20us off, 40us on = 60us 40 * 1.5 == 60ticks #define RWD_TIME_PAUSE 30 // 20us == 20 * 1.5 == 30ticks */ @@ -297,19 +297,18 @@ static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) { // Setup pm3 as a Legic Reader static uint32_t setup_phase_reader(uint8_t iv) { - // Switch on carrier and let the tag charge for 1ms + // Switch on carrier and let the tag charge for 5ms HIGH(GPIO_SSC_DOUT); - WaitUS(5000); + WaitUS(5000); ResetTicks(); - // no keystream yet legic_prng_init(0); // send IV handshake frame_sendAsReader(iv, 7); - // Now both tag and reader has same IV. Prng can start. + // tag and reader has same IV. legic_prng_init(iv); frame_receiveAsReader(¤t_frame, 6); @@ -655,7 +654,7 @@ static void frame_handle_tag(struct legic_frame const * const f) // log //uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1)}; //LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, FALSE); - Dbprintf("ICE: enter frame_handle_tag: %02x ", f->bits); + //Dbprintf("ICE: enter frame_handle_tag: %02x ", f->bits); /* First Part of Handshake (IV) */ if(f->bits == 7) { @@ -694,9 +693,7 @@ static void frame_handle_tag(struct legic_frame const * const f) if((f->bits == 6) && (f->data == xored)) { legic_state = STATE_CON; - //ResetTimer(timer); - - //WaitUS(200); + ResetTimer(timer); WaitTicks(300); return; @@ -765,7 +762,6 @@ static void frame_handle_tag(struct legic_frame const * const f) */ static void emit(int bit) { - Dbprintf("ICE: enter emit:"); switch (bit) { case 1: frame_append_bit(¤t_frame, 1); @@ -799,22 +795,35 @@ void LegicRfSimulate(int phase, int frame, int reqresp) */ int old_level = 0, active = 0; - volatile uint32_t level = 0; + volatile int32_t level = 0; legic_state = STATE_DISCON; legic_phase_drift = phase; legic_frame_drift = frame; legic_reqresp_drift = reqresp; - FpgaDownloadAndGo(FPGA_BITSTREAM_HF); - + /* to get the stream of bits from FPGA in sim mode.*/ + FpgaDownloadAndGo(FPGA_BITSTREAM_HF); + // Set up the synchronous serial port + //FpgaSetupSsc(); + // connect Demodulated Signal to ADC: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); - FpgaSetupSsc(); FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K); + //FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION); + #define LEGIC_DMA_BUFFER 256 + // The DMA buffer, used to stream samples from the FPGA + //uint8_t *dmaBuf = BigBuf_malloc(LEGIC_DMA_BUFFER); + //uint8_t *data = dmaBuf; + // Setup and start DMA. + // if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, LEGIC_DMA_BUFFER) ){ + // if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting"); + // return; + // } + + //StartCountSspClk(); /* Bitbang the receiver */ -// LINE_IN; AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN; AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN; @@ -832,7 +841,38 @@ void LegicRfSimulate(int phase, int frame, int reqresp) LED_B_ON(); DbpString("Starting Legic emulator, press button to end"); - + + /* + * The mode FPGA_HF_SIMULATOR_MODULATE_212K works like this. + * - A 1-bit input to the FPGA becomes 8 pulses on 212kHz (fc/64) (18.88us). + * - A 0-bit input to the FPGA becomes an unmodulated time of 18.88us + * + * In this mode the SOF can be written as 00011101 = 0x1D + * The EOF can be written as 10111000 = 0xb8 + * A logic 1 is 01 + * A logic 0 is 10 + volatile uint8_t b; + uint8_t i = 0; + while( !BUTTON_PRESS() ) { + WDT_HIT(); + + // not sending anything. + if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { + AT91C_BASE_SSC->SSC_THR = 0x00; + } + + // receive + if ( AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY ) { + b = (uint8_t) AT91C_BASE_SSC->SSC_RHR; + bd[i] = b; + ++i; + // if(OutOfNDecoding(b & 0x0f)) + // *len = Uart.byteCnt; + } + + } + */ + while(!BUTTON_PRESS() && !usb_poll_validate_length()) { level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN); @@ -840,23 +880,23 @@ void LegicRfSimulate(int phase, int frame, int reqresp) uint32_t time = GET_TICKS; if (level != old_level) { - - if (level) { + if (level == 1) { - ResetTicks(); - + //Dbprintf("start, %u ", time); + StartTicks(); + // did we get a signal if (FUZZ_EQUAL(time, RWD_TIME_1, RWD_TIME_FUZZ)) { - /* 1 bit */ + // 1 bit emit(1); active = 1; LED_A_ON(); } else if (FUZZ_EQUAL(time, RWD_TIME_0, RWD_TIME_FUZZ)) { - /* 0 bit */ + // 0 bit emit(0); active = 1; LED_A_ON(); } else if (active) { - /* invalid */ + // invalid emit(-1); active = 0; LED_A_OFF(); @@ -864,6 +904,7 @@ void LegicRfSimulate(int phase, int frame, int reqresp) } } + /* Frame end */ if(time >= (RWD_TIME_1 + RWD_TIME_FUZZ) && active) { emit(-1); @@ -877,20 +918,22 @@ void LegicRfSimulate(int phase, int frame, int reqresp) * side-effect of clearing any pending state in there. */ //if(time >= (20*RWD_TIME_1) && (timer->TC_SR & AT91C_TC_CLKSTA)) - //if(time >= (20 * RWD_TIME_1) ) - //StopTicks(); + if(time >= (20 * RWD_TIME_1) ) + StopTicks(); old_level = level; WDT_HIT(); - } +} WDT_HIT(); DbpString("LEGIC Prime emulator stopped"); switch_off_tag_rwd(); + FpgaDisableSscDma(); LEDsoff(); cmd_send(CMD_ACK, 1, 0, 0, 0, 0); } + //----------------------------------------------------------------------------- // Code up a string of octets at layer 2 (including CRC, we don't generate // that here) so that they can be transmitted to the reader. Doesn't transmit