X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/c7324bef2894b8515a71f28cc948fa6bea9ccbaf..6116c7961889ab2e2c6821b3ac180d6ba71f9a2a:/armsrc/iso14443a.c?ds=sidebyside

diff --git a/armsrc/iso14443a.c b/armsrc/iso14443a.c
index fe284352..01cf2486 100644
--- a/armsrc/iso14443a.c
+++ b/armsrc/iso14443a.c
@@ -507,6 +507,7 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
 	LEDsoff();
 	// init trace buffer
 	iso14a_clear_trace();
+	iso14a_set_tracing(TRUE);
 
 	// We won't start recording the frames that we acquire until we trigger;
 	// a good trigger condition to get started is probably when we see a
@@ -1725,7 +1726,15 @@ int iso14443a_select_card(byte_t* uid_ptr, iso14a_card_select_t* p_hi14a_card, u
     if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
       // Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
       // http://www.nxp.com/documents/application_note/AN10927.pdf
-      memcpy(uid_resp, uid_resp + 1, 3);
+      // This was earlier:
+      //memcpy(uid_resp, uid_resp + 1, 3);
+      // But memcpy should not be used for overlapping arrays, 
+      // and memmove appears to not be available in the arm build. 
+      // Therefore:
+      uid_resp[0] = uid_resp[1];
+      uid_resp[1] = uid_resp[2];
+      uid_resp[2] = uid_resp[3]; 
+ 
       uid_resp_len = 3;
     }
 
@@ -1932,10 +1941,11 @@ void ReaderMifare(bool first_try)
 	//byte_t par_mask = 0xff;
 	static byte_t par_low = 0;
 	bool led_on = TRUE;
-	uint8_t uid[10];
+	uint8_t uid[10]  ={0};
 	uint32_t cuid;
 
-	uint32_t nt, previous_nt;
+	uint32_t nt =0 ;
+	uint32_t previous_nt = 0;
 	static uint32_t nt_attacked = 0;
 	byte_t par_list[8] = {0,0,0,0,0,0,0,0};
 	byte_t ks_list[8] = {0,0,0,0,0,0,0,0};
@@ -2205,9 +2215,12 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 
 	if (MF_DBGLEVEL >= 1)	{
 		if (!_7BUID) {
-			Dbprintf("4B UID: %02x%02x%02x%02x",rUIDBCC1[0] , rUIDBCC1[1] , rUIDBCC1[2] , rUIDBCC1[3]);
+			Dbprintf("4B UID: %02x%02x%02x%02x", 
+				rUIDBCC1[0], rUIDBCC1[1], rUIDBCC1[2], rUIDBCC1[3]);
 		} else {
-			Dbprintf("7B UID: (%02x)%02x%02x%02x%02x%02x%02x%02x",rUIDBCC1[0] , rUIDBCC1[1] , rUIDBCC1[2] , rUIDBCC1[3],rUIDBCC2[0],rUIDBCC2[1] ,rUIDBCC2[2] , rUIDBCC2[3]);
+			Dbprintf("7B UID: (%02x)%02x%02x%02x%02x%02x%02x%02x",
+				rUIDBCC1[0], rUIDBCC1[1], rUIDBCC1[2], rUIDBCC1[3],
+				rUIDBCC2[0], rUIDBCC2[1] ,rUIDBCC2[2], rUIDBCC2[3]);
 		}
 	}
 
@@ -2275,7 +2288,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 				// select card
 				if (len == 9 && 
 						(receivedCmd[0] == 0x93 && receivedCmd[1] == 0x70 && memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) {
-					EmSendCmd(_7BUID?rSAK1:rSAK, sizeof(_7BUID?rSAK1:rSAK));
+					EmSendCmd(_7BUID?rSAK1:rSAK, _7BUID?sizeof(rSAK1):sizeof(rSAK));
 					cuid = bytes_to_num(rUIDBCC1, 4);
 					if (!_7BUID) {
 						cardSTATE = MFEMUL_WORK;
@@ -2317,10 +2330,13 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 
 				// test if auth OK
 				if (cardRr != prng_successor(nonce, 64)){
-					if (MF_DBGLEVEL >= 2)	Dbprintf("AUTH FAILED. cardRr=%08x, succ=%08x",cardRr, prng_successor(nonce, 64));
+					if (MF_DBGLEVEL >= 2) Dbprintf("AUTH FAILED for sector %d with key %c. cardRr=%08x, succ=%08x",
+							cardAUTHSC, cardAUTHKEY == 0 ? 'A' : 'B',
+							cardRr, prng_successor(nonce, 64));
 					// Shouldn't we respond anything here?
 					// Right now, we don't nack or anything, which causes the
 					// reader to do a WUPA after a while. /Martin
+					// -- which is the correct response. /piwi
 					cardSTATE_TO_IDLE();
 					LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parityBits, TRUE);
 					LogTrace(NULL, 0, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, 0, TRUE);
@@ -2334,7 +2350,9 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 				EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
 				LED_C_ON();
 				cardSTATE = MFEMUL_WORK;
-				if (MF_DBGLEVEL >= 4)	Dbprintf("AUTH COMPLETED. sector=%d, key=%d time=%d", cardAUTHSC, cardAUTHKEY, GetTickCount() - authTimer);
+				if (MF_DBGLEVEL >= 4)	Dbprintf("AUTH COMPLETED for sector %d with key %c. time=%d", 
+					cardAUTHSC, cardAUTHKEY == 0 ? 'A' : 'B',
+					GetTickCount() - authTimer);
 				break;
 			}
 			case MFEMUL_SELECT2:{
@@ -2392,12 +2410,12 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 					crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
 
 					if (!encrypted_data) { // first authentication
-						if (MF_DBGLEVEL >= 2) Dbprintf("Reader authenticating for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY  );
+						if (MF_DBGLEVEL >= 4) Dbprintf("Reader authenticating for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY  );
 
 						crypto1_word(pcs, cuid ^ nonce, 0);//Update crypto state
 						num_to_bytes(nonce, 4, rAUTH_AT); // Send nonce
 					} else { // nested authentication
-						if (MF_DBGLEVEL >= 2) Dbprintf("Reader doing nested authentication for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY );
+						if (MF_DBGLEVEL >= 4) Dbprintf("Reader doing nested authentication for block %d (0x%02x) with key %d",receivedCmd[1] ,receivedCmd[1],cardAUTHKEY );
 						ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0); 
 						num_to_bytes(ans, 4, rAUTH_AT);
 					}
@@ -2428,9 +2446,9 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 
 				if(receivedCmd[0] == 0x30 // read block
 						|| receivedCmd[0] == 0xA0 // write block
-						|| receivedCmd[0] == 0xC0
-						|| receivedCmd[0] == 0xC1
-						|| receivedCmd[0] == 0xC2 // inc dec restore
+						|| receivedCmd[0] == 0xC0 // inc
+						|| receivedCmd[0] == 0xC1 // dec
+						|| receivedCmd[0] == 0xC2 // restore
 						|| receivedCmd[0] == 0xB0) { // transfer
 					if (receivedCmd[1] >= 16 * 4) {
 						EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
@@ -2446,7 +2464,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 				}
 				// read block
 				if (receivedCmd[0] == 0x30) {
-					if (MF_DBGLEVEL >= 2) {
+					if (MF_DBGLEVEL >= 4) {
 						Dbprintf("Reader reading block %d (0x%02x)",receivedCmd[1],receivedCmd[1]);
 					}
 					emlGetMem(response, receivedCmd[1], 1);
@@ -2462,7 +2480,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 				}
 				// write block
 				if (receivedCmd[0] == 0xA0) {
-					if (MF_DBGLEVEL >= 2) Dbprintf("RECV 0xA0 write block %d (%02x)",receivedCmd[1],receivedCmd[1]);
+					if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0xA0 write block %d (%02x)",receivedCmd[1],receivedCmd[1]);
 					EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
 					cardSTATE = MFEMUL_WRITEBL2;
 					cardWRBL = receivedCmd[1];
@@ -2470,7 +2488,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 				}
 				// increment, decrement, restore
 				if (receivedCmd[0] == 0xC0 || receivedCmd[0] == 0xC1 || receivedCmd[0] == 0xC2) {
-					if (MF_DBGLEVEL >= 2) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
+					if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
 					if (emlCheckValBl(receivedCmd[1])) {
 						if (MF_DBGLEVEL >= 2) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking");
 						EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
@@ -2488,7 +2506,7 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 				}
 				// transfer
 				if (receivedCmd[0] == 0xB0) {
-					if (MF_DBGLEVEL >= 2) Dbprintf("RECV 0x%02x transfer block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
+					if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x transfer block %d (%02x)",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
 					if (emlSetValBl(cardINTREG, cardINTBLOCK, receivedCmd[1]))
 						EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
 					else
@@ -2623,7 +2641,8 @@ void RAMFUNC SniffMifare(uint8_t param) {
 	// C(red) A(yellow) B(green)
 	LEDsoff();
 	// init trace buffer
-    iso14a_clear_trace();
+	iso14a_clear_trace();
+	iso14a_set_tracing(TRUE);
 
 	// The command (reader -> tag) that we're receiving.
 	// The length of a received command will in most cases be no more than 18 bytes.