X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/d16e0478d281e959e9d939ed5af331b5d67d17c9..961658bba9f9deac3d1fd58a13fd92b428b1af40:/armsrc/lfops.c?ds=inline

diff --git a/armsrc/lfops.c b/armsrc/lfops.c
index cde4ae54..1a7c3224 100644
--- a/armsrc/lfops.c
+++ b/armsrc/lfops.c
@@ -8,44 +8,60 @@
 // Also routines for raw mode reading/simulating of LF waveform
 //-----------------------------------------------------------------------------
 
-#include "proxmark3.h"
+#include "../include/proxmark3.h"
 #include "apps.h"
 #include "util.h"
-#include "hitag2.h"
-#include "crc16.h"
+#include "../include/hitag2.h"
+#include "../common/crc16.h"
 #include "string.h"
+#include "crapto1.h"
+#include "mifareutil.h"
 
-void AcquireRawAdcSamples125k(int at134khz)
+#define SHORT_COIL()	LOW(GPIO_SSC_DOUT)
+#define OPEN_COIL()		HIGH(GPIO_SSC_DOUT)
+
+void LFSetupFPGAForADC(int divisor, bool lf_field)
 {
-	if (at134khz)
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+	if ( (divisor == 1) || (divisor < 0) || (divisor > 255) )
 		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-	else
+	else if (divisor == 0)
 		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	else
+		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
 
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | (lf_field ? FPGA_LF_ADC_READER_FIELD : 0));
 
 	// Connect the A/D to the peak-detected low-frequency path.
 	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-
+	
 	// Give it a bit of time for the resonant antenna to settle.
-	SpinDelay(50);
-
+	SpinDelay(150);
+	
 	// Now set up the SSC to get the ADC samples that are now streaming at us.
 	FpgaSetupSsc();
+}
 
-	// Now call the acquisition routine
+void AcquireRawAdcSamples125k(int divisor)
+{
+	LFSetupFPGAForADC(divisor, true);
 	DoAcquisition125k();
 }
 
+void SnoopLFRawAdcSamples(int divisor, int trigger_threshold)
+{
+	LFSetupFPGAForADC(divisor, false);
+	DoAcquisition125k_threshold(trigger_threshold);
+}
+
 // split into two routines so we can avoid timing issues after sending commands //
-void DoAcquisition125k(void)
+void DoAcquisition125k_internal(int trigger_threshold, bool silent)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int n = sizeof(BigBuf);
-	int i;
+	uint8_t *dest =  mifare_get_bigbufptr();
+	int n = 24000;
+	int i = 0;
+	memset(dest, 0x00, n);
 
-	memset(dest, 0, n);
-	i = 0;
 	for(;;) {
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
 			AT91C_BASE_SSC->SSC_THR = 0x43;
@@ -53,38 +69,46 @@ void DoAcquisition125k(void)
 		}
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
 			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			i++;
 			LED_D_OFF();
-			if (i >= n) break;
+			if (trigger_threshold != -1 && dest[i] < trigger_threshold)
+				continue;
+			else
+				trigger_threshold = -1;
+			if (++i >= n) break;
 		}
 	}
-	Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
+	if (!silent){
+		Dbprintf("buffer samples: %02x %02x %02x %02x %02x %02x %02x %02x ...",
 			dest[0], dest[1], dest[2], dest[3], dest[4], dest[5], dest[6], dest[7]);
+	}
 }
-
+void DoAcquisition125k_threshold(int trigger_threshold) {
+	 DoAcquisition125k_internal(trigger_threshold, true);
+}
+void DoAcquisition125k() {
+	 DoAcquisition125k_internal(-1, true);
+}	
+	
 void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1, uint8_t *command)
 {
-	int at134khz;
 
 	/* Make sure the tag is reset */
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	SpinDelay(2500);
 
+	int divisor_used = 95; // 125 KHz
 	// see if 'h' was specified
-	if (command[strlen((char *) command) - 1] == 'h')
-		at134khz = TRUE;
-	else
-		at134khz = FALSE;
 
-	if (at134khz)
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-	else
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	if (command[strlen((char *) command) - 1] == 'h')
+		divisor_used = 88; // 134.8 KHz
 
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 	// Give it a bit of time for the resonant antenna to settle.
 	SpinDelay(50);
+	
+	
 	// And a little more time for the tag to fully power up
 	SpinDelay(2000);
 
@@ -96,12 +120,9 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
 		FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 		LED_D_OFF();
 		SpinDelayUs(delay_off);
-		if (at134khz)
-			FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-		else
-			FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
 
-		FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+		FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 		LED_D_ON();
 		if(*(command++) == '0')
 			SpinDelayUs(period_0);
@@ -111,15 +132,12 @@ void ModThenAcquireRawAdcSamples125k(int delay_off, int period_0, int period_1,
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	LED_D_OFF();
 	SpinDelayUs(delay_off);
-	if (at134khz)
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
-	else
-		FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor_used); 
 
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 
 	// now do the read
-	DoAcquisition125k();
+	DoAcquisition125k(-1);
 }
 
 /* blank r/w tag data stream
@@ -156,6 +174,7 @@ void ReadTItag(void)
 	uint32_t threshold = (sampleslo - sampleshi + 1)>>1;
 
 	// TI tags charge at 134.2Khz
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 88); //134.8Khz
 
 	// Place FPGA in passthrough mode, in this mode the CROSS_LO line
@@ -272,17 +291,17 @@ void WriteTIbyte(uint8_t b)
 	{
 		if (b&(1<<i)) {
 			// stop modulating antenna
-			LOW(GPIO_SSC_DOUT);
+			SHORT_COIL();
 			SpinDelayUs(1000);
 			// modulate antenna
-			HIGH(GPIO_SSC_DOUT);
+			OPEN_COIL();
 			SpinDelayUs(1000);
 		} else {
 			// stop modulating antenna
-			LOW(GPIO_SSC_DOUT);
+			SHORT_COIL();
 			SpinDelayUs(300);
 			// modulate antenna
-			HIGH(GPIO_SSC_DOUT);
+			OPEN_COIL();
 			SpinDelayUs(1700);
 		}
 	}
@@ -363,6 +382,7 @@ void AcquireTiType(void)
 // if not provided a valid crc will be computed from the data and written.
 void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 {
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);	
 	if(crc == 0) {
 	 	crc = update_crc16(crc, (idlo)&0xff);
 		crc = update_crc16(crc, (idlo>>8)&0xff);
@@ -431,57 +451,82 @@ void WriteTItag(uint32_t idhi, uint32_t idlo, uint16_t crc)
 
 void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
 {
-	int i;
-	uint8_t *tab = (uint8_t *)BigBuf;
-    
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
-    
-	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
-    
-	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
-	AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
-    
-#define SHORT_COIL()	LOW(GPIO_SSC_DOUT)
-#define OPEN_COIL()		HIGH(GPIO_SSC_DOUT)
-    
-	i = 0;
-	for(;;) {
-		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
-			if(BUTTON_PRESS()) {
-				DbpString("Stopped");
-				return;
-			}
-			WDT_HIT();
+	int i = 0;
+	uint8_t *buf = (uint8_t *)BigBuf;
+
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	//FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+	
+	// Connect the A/D to the peak-detected low-frequency path.
+	//SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+		
+	// Configure output and enable pin that is connected to the FPGA (for modulating)
+	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;    
+	AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;    // (PIO_PER) PIO Enable Register , 
+	AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;    // (PIO_OER) Output Enable Register
+	AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;     // (PIO_ODR) Output Disable Register
+
+	// Give it a bit of time for the resonant antenna to settle.
+	SpinDelay(150);
+	
+	while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)); // wait for ssp_clk to go high
+	while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK);    // wait for ssp_clk to go low
+	
+ 	while(!BUTTON_PRESS()) { 
+		WDT_HIT();
+
+		// PIO_PDSR = Pin Data Status Register  
+		// GPIO_SSC_CLK  = SSC Transmit Clock
+		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {    // wait for ssp_clk to go high
+			 if(BUTTON_PRESS()) {
+				 DbpString("Stopped at 0");
+				 FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+				 return;
+			 }
+			 WDT_HIT();
 		}
         
-		if (ledcontrol)
-			LED_D_ON();
-        
-		if(tab[i])
-			OPEN_COIL();
-		else
-			SHORT_COIL();
-        
-		if (ledcontrol)
-			LED_D_OFF();
-        
-		while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
-			if(BUTTON_PRESS()) {
-				DbpString("Stopped");
+		// PIO_CODR = Clear Output Data Register
+		// PIO_SODR = Set Output Data Register
+		//#define LOW(x)	 AT91C_BASE_PIOA->PIO_CODR = (x)
+		//#define HIGH(x)	 AT91C_BASE_PIOA->PIO_SODR = (x)
+		
+		if ( buf[i] > 0 ){
+			HIGH(GPIO_SSC_DOUT);
+			//FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+			//FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_PASSTHRU);
+		} else {
+			LOW(GPIO_SSC_DOUT);
+			//FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); 
+		}
+	   
+		 while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {   // wait for ssp_clk to go low
+			 if(BUTTON_PRESS()) {
+				DbpString("Stopped at 1");
+				FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
 				return;
 			}
 			WDT_HIT();
-		}
-        
-		i++;
+		 }
+		
+		//SpinDelayUs(512);
+		
+		++i;
 		if(i == period) {
 			i = 0;
 			if (gap) {
-				SHORT_COIL();
-				SpinDelayUs(gap);
-			}
+				// turn of modulation
+				LOW(GPIO_SSC_DOUT);
+				// wait
+				SpinDelay(gap);
+			} 
 		}
 	}
+	DbpString("Stopped");
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+	return;
 }
 
 #define DEBUG_FRAME_CONTENTS 1
@@ -586,240 +631,258 @@ void CmdHIDsimTAG(int hi, int lo, int ledcontrol)
 
 	if (ledcontrol)
 		LED_A_ON();
+	
 	SimulateTagLowFrequency(n, 0, ledcontrol);
 
 	if (ledcontrol)
 		LED_A_OFF();
 }
 
-
-// loop to capture raw HID waveform then FSK demodulate the TAG ID from it
-void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
+size_t fsk_demod(uint8_t * dest, size_t size)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int m=0, n=0, i=0, idx=0, found=0, lastval=0;
-	uint32_t hi2=0, hi=0, lo=0;
+	uint32_t last_transition = 0;
+	uint32_t idx = 1;
 
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	// we don't care about actual value, only if it's more or less than a
+	// threshold essentially we capture zero crossings for later analysis
+	uint8_t threshold_value = 127;
 
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
+	// sync to first lo-hi transition, and threshold
 
-	// Give it a bit of time for the resonant antenna to settle.
-	SpinDelay(50);
+	//Need to threshold first sample
+	dest[0] = (dest[0] < threshold_value) ? 0 : 1;
 
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
+	size_t numBits = 0;
+	// count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
+	// or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
+	// between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
+	for(idx = 1; idx < size; idx++) {
+		// threshold current value
+		dest[idx] = (dest[idx] < threshold_value) ? 0 : 1;
 
-	for(;;) {
-		WDT_HIT();
-		if (ledcontrol)
-			LED_A_ON();
-		if(BUTTON_PRESS()) {
-			DbpString("Stopped");
-			if (ledcontrol)
-				LED_A_OFF();
-			return;
-		}
+		// Check for 0->1 transition
+		if (dest[idx-1] < dest[idx]) { // 0 -> 1 transition
 
-		i = 0;
-		m = sizeof(BigBuf);
-		memset(dest,128,m);
-		for(;;) {
-			if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
-				AT91C_BASE_SSC->SSC_THR = 0x43;
-				if (ledcontrol)
-					LED_D_ON();
-			}
-			if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
-				dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-				// we don't care about actual value, only if it's more or less than a
-				// threshold essentially we capture zero crossings for later analysis
-				if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
-				i++;
-				if (ledcontrol)
-					LED_D_OFF();
-				if(i >= m) {
-					break;
-				}
-			}
+			dest[numBits] =  (idx-last_transition <  9) ? 1 : 0;
+			last_transition = idx;
+			numBits++;
 		}
+	}
+	return numBits; //Actually, it returns the number of bytes, but each byte represents a bit: 1 or 0
+}
 
-		// FSK demodulator
 
-		// sync to first lo-hi transition
-		for( idx=1; idx<m; idx++) {
-			if (dest[idx-1]<dest[idx])
-				lastval=idx;
-				break;
-		}
-		WDT_HIT();
+size_t aggregate_bits(uint8_t *dest,size_t size, uint8_t h2l_crossing_value,uint8_t l2h_crossing_value, uint8_t maxConsequtiveBits )
+{
+	uint8_t lastval=dest[0];
+	uint32_t idx=0;
+	size_t numBits=0;
+	uint32_t n=1;
 
-		// count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
-		// or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
-		// between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
-		for( i=0; idx<m; idx++) {
-			if (dest[idx-1]<dest[idx]) {
-				dest[i]=idx-lastval;
-				if (dest[i] <= 8) {
-						dest[i]=1;
-				} else {
-						dest[i]=0;
-				}
+	for( idx=1; idx < size; idx++) {
 
-				lastval=idx;
-				i++;
-			}
+		if (dest[idx]==lastval) {
+			n++;
+			continue;
 		}
-		m=i;
+		//if lastval was 1, we have a 1->0 crossing
+		if ( dest[idx-1] ) {
+			n=(n+1) / h2l_crossing_value;
+		} else {// 0->1 crossing
+			n=(n+1) / l2h_crossing_value;
+		}
+		if (n == 0) n = 1;
+
+		if(n < maxConsequtiveBits)
+		{
+			memset(dest+numBits, dest[idx-1] , n);
+			numBits += n;
+		}
+		n=0;
+		lastval=dest[idx];
+	}//end for
+
+	return numBits;
+
+}
+// loop to capture raw HID waveform then FSK demodulate the TAG ID from it
+void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
+{
+	uint8_t *dest = (uint8_t *)BigBuf;
+
+	size_t size=0,idx=0; //, found=0;
+  uint32_t hi2=0, hi=0, lo=0;
+
+	// Configure to go in 125Khz listen mode
+	LFSetupFPGAForADC(0, true);
+
+	while(!BUTTON_PRESS()) {
+
 		WDT_HIT();
+		if (ledcontrol) LED_A_ON();
+
+		DoAcquisition125k_internal(-1,true);
+		size  = sizeof(BigBuf);
+
+		// FSK demodulator
+		size = fsk_demod(dest, size);
 
 		// we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
-		lastval=dest[0];
-		idx=0;
-		i=0;
-		n=0;
-		for( idx=0; idx<m; idx++) {
-			if (dest[idx]==lastval) {
-				n++;
-			} else {
-				// a bit time is five fc/10 or six fc/8 cycles so figure out how many bits a pattern width represents,
-				// an extra fc/8 pattern preceeds every 4 bits (about 200 cycles) just to complicate things but it gets
-				// swallowed up by rounding
-				// expected results are 1 or 2 bits, any more and it's an invalid manchester encoding
-				// special start of frame markers use invalid manchester states (no transitions) by using sequences
-				// like 111000
-				if (dest[idx-1]) {
-					n=(n+1)/6;			// fc/8 in sets of 6
-				} else {
-					n=(n+1)/5;			// fc/10 in sets of 5
-				}
-				switch (n) {			// stuff appropriate bits in buffer
-					case 0:
-					case 1:	// one bit
-						dest[i++]=dest[idx-1];
-						break;
-					case 2: // two bits
-						dest[i++]=dest[idx-1];
-						dest[i++]=dest[idx-1];
-						break;
-					case 3: // 3 bit start of frame markers
-						dest[i++]=dest[idx-1];
-						dest[i++]=dest[idx-1];
-						dest[i++]=dest[idx-1];
-						break;
-					// When a logic 0 is immediately followed by the start of the next transmisson
-					// (special pattern) a pattern of 4 bit duration lengths is created.
-					case 4:
-						dest[i++]=dest[idx-1];
-						dest[i++]=dest[idx-1];
-						dest[i++]=dest[idx-1];
-						dest[i++]=dest[idx-1];
-						break;
-					default:	// this shouldn't happen, don't stuff any bits
-						break;
-				}
-				n=0;
-				lastval=dest[idx];
-			}
-		}
-		m=i;
+		// 1->0 : fc/8 in sets of 6
+		// 0->1 : fc/10 in sets of 5
+		size = aggregate_bits(dest,size, 6,5,5);
+
 		WDT_HIT();
 
 		// final loop, go over previously decoded manchester data and decode into usable tag ID
 		// 111000 bit pattern represent start of frame, 01 pattern represents a 1 and 10 represents a 0
-		for( idx=0; idx<m-6; idx++) {
+		uint8_t frame_marker_mask[] = {1,1,1,0,0,0};
+		int numshifts = 0;
+		idx = 0;
+		while( idx + sizeof(frame_marker_mask) < size) {
 			// search for a start of frame marker
-			if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) )
-			{
-				found=1;
-				idx+=6;
-				if (found && (hi2|hi|lo)) {
-					if (hi2 != 0){
-  					Dbprintf("TAG ID: %x%08x%08x (%d)",
-	  					(unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-	  			}		
-					else {
-					  Dbprintf("TAG ID: %x%08x (%d)",
-						  (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-					}	
-					/* if we're only looking for one tag */
-					if (findone)
-					{
-						*high = hi;
-						*low = lo;
-						return;
-					}
-					hi2=0;
-					hi=0;
-					lo=0;
-					found=0;
-				}
-			}
-			if (found) {
-				if (dest[idx] && (!dest[idx+1]) ) {
-					hi2=(hi2<<1)|(hi>>31);
+			if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
+			{ // frame marker found
+				idx+=sizeof(frame_marker_mask);
+
+				while(dest[idx] != dest[idx+1] && idx < size-2)
+				{	
+					// Keep going until next frame marker (or error)
+					// Shift in a bit. Start by shifting high registers
+          hi2=(hi2<<1)|(hi>>31);
 					hi=(hi<<1)|(lo>>31);
+					//Then, shift in a 0 or one into low
+					if (dest[idx] && !dest[idx+1])	// 1 0
 					lo=(lo<<1)|0;
-				} else if ( (!dest[idx]) && dest[idx+1]) {
-					hi2=(hi2<<1)|(hi>>31);
-					hi=(hi<<1)|(lo>>31);
-					lo=(lo<<1)|1;
-				} else {
-					found=0;
-					hi2=0;
-					hi=0;
-					lo=0;
+					else // 0 1
+						lo=(lo<<1)|
+								1;
+					numshifts ++;
+					idx += 2;
 				}
-				idx++;
-			}
-			if ( dest[idx] && dest[idx+1] && dest[idx+2] && (!dest[idx+3]) && (!dest[idx+4]) && (!dest[idx+5]) )
-			{
-				found=1;
-				idx+=6;
-				if (found && (hi|lo)) {
+				//Dbprintf("Num shifts: %d ", numshifts);
+				// Hopefully, we read a tag and	 hit upon the next frame marker
+				if(idx + sizeof(frame_marker_mask) < size)
+				{
+				if ( memcmp(dest+idx, frame_marker_mask, sizeof(frame_marker_mask)) == 0)
+				{
 					if (hi2 != 0){
-  					Dbprintf("TAG ID: %x%08x%08x (%d)",
-	  					(unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-	  			}		
+						Dbprintf("TAG ID: %x%08x%08x (%d)",
+							 (unsigned int) hi2, (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
+					}
 					else {
-					  Dbprintf("TAG ID: %x%08x (%d)",
-						  (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
-					}	
-					/* if we're only looking for one tag */
-					if (findone)
-					{
-						*high = hi;
-						*low = lo;
-						return;
+						Dbprintf("TAG ID: %x%08x (%d)",
+						 (unsigned int) hi, (unsigned int) lo, (unsigned int) (lo>>1) & 0xFFFF);
 					}
-          hi2=0;
-					hi=0;
-					lo=0;
-					found=0;
 				}
+
+				}
+
+				// reset
+				hi2 = hi = lo = 0;
+				numshifts = 0;
+			}else
+			{
+				idx++;
 			}
 		}
 		WDT_HIT();
+
+	}
+	DbpString("Stopped");
+	if (ledcontrol) LED_A_OFF();
+}
+
+uint32_t bytebits_to_byte(uint8_t* src, int numbits)
+{
+	uint32_t num = 0;
+	for(int i = 0 ; i < numbits ; i++)
+	{
+		num = (num << 1) | (*src);
+		src++;
 	}
+	return num;
 }
 
 
+void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
+{
+	uint8_t *dest = (uint8_t *)BigBuf;
+
+	size_t size=0, idx=0;
+	uint32_t code=0, code2=0;
+
+	// Configure to go in 125Khz listen mode
+	LFSetupFPGAForADC(0, true);
+
+	while(!BUTTON_PRESS()) {
+		WDT_HIT();
+		if (ledcontrol) LED_A_ON();
+
+		DoAcquisition125k_internal(-1,true);
+		size  = sizeof(BigBuf);
+
+		// FSK demodulator
+		size = fsk_demod(dest, size);
+
+		// we now have a set of cycle counts, loop over previous results and aggregate data into bit patterns
+		// 1->0 : fc/8 in sets of 7
+		// 0->1 : fc/10 in sets of 6
+		size = aggregate_bits(dest, size, 7,6,13);
+
+		WDT_HIT();
+		
+		//Handle the data
+ 	    uint8_t mask[] = {0,0,0,0,0,0,0,0,0,1};
+		for( idx=0; idx < size - 64; idx++) {
+
+ 	    	if ( memcmp(dest + idx, mask, sizeof(mask)) ) continue;
+
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx],   dest[idx+1],   dest[idx+2],dest[idx+3],dest[idx+4],dest[idx+5],dest[idx+6],dest[idx+7]);
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+8], dest[idx+9], dest[idx+10],dest[idx+11],dest[idx+12],dest[idx+13],dest[idx+14],dest[idx+15]);			  
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+16],dest[idx+17],dest[idx+18],dest[idx+19],dest[idx+20],dest[idx+21],dest[idx+22],dest[idx+23]);
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+24],dest[idx+25],dest[idx+26],dest[idx+27],dest[idx+28],dest[idx+29],dest[idx+30],dest[idx+31]);
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+32],dest[idx+33],dest[idx+34],dest[idx+35],dest[idx+36],dest[idx+37],dest[idx+38],dest[idx+39]);
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+40],dest[idx+41],dest[idx+42],dest[idx+43],dest[idx+44],dest[idx+45],dest[idx+46],dest[idx+47]);
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+48],dest[idx+49],dest[idx+50],dest[idx+51],dest[idx+52],dest[idx+53],dest[idx+54],dest[idx+55]);
+		    Dbprintf("%d%d%d%d%d%d%d%d",dest[idx+56],dest[idx+57],dest[idx+58],dest[idx+59],dest[idx+60],dest[idx+61],dest[idx+62],dest[idx+63]);
+		
+		    code = bytebits_to_byte(dest+idx,32);
+		    code2 = bytebits_to_byte(dest+idx+32,32); 
+			
+		    short version = bytebits_to_byte(dest+idx+14,4); 
+		    char unknown = bytebits_to_byte(dest+idx+19,8) ;
+		    uint16_t number = bytebits_to_byte(dest+idx+36,9); 
+		    
+		    Dbprintf("XSF(%02d)%02x:%d (%08x%08x)",version,unknown,number,code,code2);
+		    if (ledcontrol)	LED_D_OFF();
+		
+		// if we're only looking for one tag 
+		if (findone){
+			LED_A_OFF();
+			return;
+		}
+	}
+	WDT_HIT();
+	}
+	DbpString("Stopped");
+	if (ledcontrol) LED_A_OFF();
+}
+
 /*------------------------------
  * T5555/T5557/T5567 routines
  *------------------------------
  */
 
 /* T55x7 configuration register definitions */
-#define T55x7_POR_DELAY			0x00000001
-#define T55x7_ST_TERMINATOR		0x00000008
-#define T55x7_PWD			0x00000010
+#define T55x7_POR_DELAY				0x00000001
+#define T55x7_ST_TERMINATOR			0x00000008
+#define T55x7_PWD					0x00000010
 #define T55x7_MAXBLOCK_SHIFT		5
-#define T55x7_AOR			0x00000200
-#define T55x7_PSKCF_RF_2		0
-#define T55x7_PSKCF_RF_4		0x00000400
-#define T55x7_PSKCF_RF_8		0x00000800
+#define T55x7_AOR					0x00000200
+#define T55x7_PSKCF_RF_2			0
+#define T55x7_PSKCF_RF_4			0x00000400
+#define T55x7_PSKCF_RF_8			0x00000800
 #define T55x7_MODULATION_DIRECT		0
 #define T55x7_MODULATION_PSK1		0x00001000
 #define T55x7_MODULATION_PSK2		0x00002000
@@ -830,17 +893,17 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 #define T55x7_MODULATION_FSK2a		0x00007000
 #define T55x7_MODULATION_MANCHESTER	0x00008000
 #define T55x7_MODULATION_BIPHASE	0x00010000
-#define T55x7_BITRATE_RF_8		0
-#define T55x7_BITRATE_RF_16		0x00040000
-#define T55x7_BITRATE_RF_32		0x00080000
-#define T55x7_BITRATE_RF_40		0x000C0000
-#define T55x7_BITRATE_RF_50		0x00100000
-#define T55x7_BITRATE_RF_64		0x00140000
+#define T55x7_BITRATE_RF_8			0
+#define T55x7_BITRATE_RF_16			0x00040000
+#define T55x7_BITRATE_RF_32			0x00080000
+#define T55x7_BITRATE_RF_40			0x000C0000
+#define T55x7_BITRATE_RF_50			0x00100000
+#define T55x7_BITRATE_RF_64			0x00140000
 #define T55x7_BITRATE_RF_100		0x00180000
 #define T55x7_BITRATE_RF_128		0x001C0000
 
 /* T5555 (Q5) configuration register definitions */
-#define T5555_ST_TERMINATOR		0x00000001
+#define T5555_ST_TERMINATOR			0x00000001
 #define T5555_MAXBLOCK_SHIFT		0x00000001
 #define T5555_MODULATION_MANCHESTER	0
 #define T5555_MODULATION_PSK1		0x00000010
@@ -850,32 +913,43 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
 #define T5555_MODULATION_FSK2		0x00000050
 #define T5555_MODULATION_BIPHASE	0x00000060
 #define T5555_MODULATION_DIRECT		0x00000070
-#define T5555_INVERT_OUTPUT		0x00000080
-#define T5555_PSK_RF_2			0
-#define T5555_PSK_RF_4			0x00000100
-#define T5555_PSK_RF_8			0x00000200
-#define T5555_USE_PWD			0x00000400
-#define T5555_USE_AOR			0x00000800
-#define T5555_BITRATE_SHIFT		12
-#define T5555_FAST_WRITE		0x00004000
-#define T5555_PAGE_SELECT		0x00008000
+#define T5555_INVERT_OUTPUT			0x00000080
+#define T5555_PSK_RF_2				0
+#define T5555_PSK_RF_4				0x00000100
+#define T5555_PSK_RF_8				0x00000200
+#define T5555_USE_PWD				0x00000400
+#define T5555_USE_AOR				0x00000800
+#define T5555_BITRATE_SHIFT			12
+#define T5555_FAST_WRITE			0x00004000
+#define T5555_PAGE_SELECT			0x00008000
 
 /*
  * Relevant times in microsecond
  * To compensate antenna falling times shorten the write times
  * and enlarge the gap ones.
  */
-#define START_GAP 250
-#define WRITE_GAP 160
-#define WRITE_0   144 // 192
-#define WRITE_1   400 // 432 for T55x7; 448 for E5550
+#define START_GAP 30*8 // 10 - 50fc 250
+#define WRITE_GAP 20*8 //  8 - 30fc
+#define WRITE_0   24*8 // 16 - 31fc 24fc 192
+#define WRITE_1   54*8 // 48 - 63fc 54fc 432 for T55x7; 448 for E5550
+
+//  VALUES TAKEN FROM EM4x function: SendForward
+//  START_GAP = 440;       (55*8) cycles at 125Khz (8us = 1cycle)
+//  WRITE_GAP = 128;       (16*8)
+//  WRITE_1   = 256 32*8;  (32*8) 
+
+//  These timings work for 4469/4269/4305 (with the 55*8 above)
+//  WRITE_0 = 23*8 , 9*8  SpinDelayUs(23*8); 
+
+#define T55xx_SAMPLES_SIZE		12000 // 32 x 32 x 10  (32 bit times numofblock (7), times clock skip..)
 
 // Write one bit to card
 void T55xxWriteBit(int bit)
 {
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-	if (bit == 0)
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+	if (!bit)
 		SpinDelayUs(WRITE_0);
 	else
 		SpinDelayUs(WRITE_1);
@@ -886,14 +960,11 @@ void T55xxWriteBit(int bit)
 // Write one card block in page 0, no lock
 void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 {
-	unsigned int i;
+	uint32_t i = 0;
 
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
+	// Set up FPGA, 125kHz
+	// Wait for config.. (192+8190xPOW)x8 == 67ms
+	LFSetupFPGAForADC(0, true);
 
 	// Now start writting
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
@@ -906,7 +977,7 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod
 		// Pwd
 		for (i = 0x80000000; i != 0; i >>= 1)
 			T55xxWriteBit(Pwd & i);
-	}	
+	}
 	// Lock bit
 	T55xxWriteBit(0);
 
@@ -921,38 +992,28 @@ void T55xxWriteBlock(uint32_t Data, uint32_t Block, uint32_t Pwd, uint8_t PwdMod
 	// Now perform write (nominal is 5.6 ms for T55x7 and 18ms for E5550,
 	// so wait a little more)
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
 	SpinDelay(20);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 }
 
-
-// Read one card block in page 0 
+// Read one card block in page 0
 void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 {
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int m=0, i=0;
- 
-	m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-	memset(dest, 128, m);
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
+	uint8_t *dest =  mifare_get_bigbufptr();
+	uint16_t bufferlength = T55xx_SAMPLES_SIZE;
+	uint32_t i = 0;
 
-	LED_D_ON();
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
+	// Clear destination buffer before sending the command  0x80 = average.
+	memset(dest, 0x80, bufferlength);
 
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
+	// Set up FPGA, 125kHz
+	// Wait for config.. (192+8190xPOW)x8 == 67ms
+	LFSetupFPGAForADC(0, true);
 
-	// Now start writting
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	SpinDelayUs(START_GAP);
-
+  
 	// Opcode
 	T55xxWriteBit(1);
 	T55xxWriteBit(0); //Page 0
@@ -960,96 +1021,92 @@ void T55xxReadBlock(uint32_t Block, uint32_t Pwd, uint8_t PwdMode)
 		// Pwd
 		for (i = 0x80000000; i != 0; i >>= 1)
 			T55xxWriteBit(Pwd & i);
-	}	
+	}
 	// Lock bit
 	T55xxWriteBit(0);
 	// Block
 	for (i = 0x04; i != 0; i >>= 1)
 		T55xxWriteBit(Block & i);
   
-  // Turn field on to read the response
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-
-	// Now do the acquisition 
+	// Turn field on to read the response
+	TurnReadLFOn();
+  
+	// Now do the acquisition
 	i = 0;
 	for(;;) {
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
 			AT91C_BASE_SSC->SSC_THR = 0x43;
+			LED_D_ON();
 		}
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
 			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			// we don't care about actual value, only if it's more or less than a
-			// threshold essentially we capture zero crossings for later analysis
-//			if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
-			i++;
-			if (i >= m) break;
+			++i;
+			LED_D_OFF();
+			if (i > bufferlength) break;
 		}
 	}
-
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+ 
+	cmd_send(CMD_ACK,0,0,0,0,0);
+    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
 	LED_D_OFF();
-	DbpString("DONE!");
 }
 
 // Read card traceability data (page 1)
-void T55xxReadTrace(void){ 
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int m=0, i=0;
- 
-	m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-	memset(dest, 128, m);
-	// Connect the A/D to the peak-detected low-frequency path.
-	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
-	// Now set up the SSC to get the ADC samples that are now streaming at us.
-	FpgaSetupSsc();
-
-	LED_D_ON();
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
-
-	// Now start writting
+void T55xxReadTrace(void){
+	uint8_t *dest =  mifare_get_bigbufptr();
+	uint16_t bufferlength = T55xx_SAMPLES_SIZE;
+	int i=0;
+	
+	// Clear destination buffer before sending the command 0x80 = average
+	memset(dest, 0x80, bufferlength);  
+  
+	LFSetupFPGAForADC(0, true);
+  
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	SpinDelayUs(START_GAP);
-
+  
 	// Opcode
 	T55xxWriteBit(1);
 	T55xxWriteBit(1); //Page 1
   
-  // Turn field on to read the response
-	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-
-	// Now do the acquisition 
-	i = 0;
+	// Turn field on to read the response
+	TurnReadLFOn();
+  
+	// Now do the acquisition
 	for(;;) {
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
 			AT91C_BASE_SSC->SSC_THR = 0x43;
+			LED_D_ON();
 		}
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
 			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			i++;
-			if (i >= m) break;
+			++i;
+			LED_D_OFF();
+		
+			if (i >= bufferlength) break;
 		}
 	}
-
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+  
+	cmd_send(CMD_ACK,0,0,0,0,0);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
 	LED_D_OFF();
-	DbpString("DONE!");
+}
+
+void TurnReadLFOn(){
+	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+	// Give it a bit of time for the resonant antenna to settle.
+	//SpinDelay(30);
+	SpinDelayUs(8*150);
 }
 
 /*-------------- Cloning routines -----------*/
 // Copy HID id to card and setup block 0 config
 void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
 {
-	int data1, data2, data3, data4, data5, data6; //up to six blocks for long format
+	int data1=0, data2=0, data3=0, data4=0, data5=0, data6=0; //up to six blocks for long format
 	int last_block = 0;
-
+  
   if (longFMT){
 	  // Ensure no more than 84 bits supplied
 	  if (hi2>0xFFFFF) {
@@ -1065,7 +1122,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
 		  else
 			  data1 |= (1<<((3-i)*2)); // 0 -> 01
 	  }
-
+    
   	data2 = 0;
   	for (int i=0;i<16;i++) {
   		if (hi2 & (1<<(15-i)))
@@ -1073,7 +1130,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
   		else
   			data2 |= (1<<((15-i)*2)); // 0 -> 01
     }
-
+    
   	data3 = 0;
   	for (int i=0;i<16;i++) {
   		if (hi & (1<<(31-i)))
@@ -1081,7 +1138,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
   		else
   			data3 |= (1<<((15-i)*2)); // 0 -> 01
   	}
-  
+    
   	data4 = 0;
   	for (int i=0;i<16;i++) {
   		if (hi & (1<<(15-i)))
@@ -1097,7 +1154,7 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
   		else
   			data5 |= (1<<((15-i)*2)); // 0 -> 01
   	}
-  
+    
   	data6 = 0;
   	for (int i=0;i<16;i++) {
   		if (lo & (1<<(15-i)))
@@ -1106,25 +1163,25 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
   			data6 |= (1<<((15-i)*2)); // 0 -> 01
     }
   }
-  else {	
+  else {
 	  // Ensure no more than 44 bits supplied
 	  if (hi>0xFFF) {
 		  DbpString("Tags can only have 44 bits.");
 		  return;
 	  }
-
+    
   	// Build the 3 data blocks for supplied 44bit ID
   	last_block = 3;
   	
   	data1 = 0x1D000000; // load preamble
-  
-  	for (int i=0;i<12;i++) {
-  		if (hi & (1<<(11-i)))
-  			data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
-  		else
-  			data1 |= (1<<((11-i)*2)); // 0 -> 01
-  	}
-  
+    
+    for (int i=0;i<12;i++) {
+      if (hi & (1<<(11-i)))
+        data1 |= (1<<(((11-i)*2)+1)); // 1 -> 10
+      else
+        data1 |= (1<<((11-i)*2)); // 0 -> 01
+    }
+    
   	data2 = 0;
   	for (int i=0;i<16;i++) {
   		if (lo & (1<<(31-i)))
@@ -1132,16 +1189,16 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
   		else
   			data2 |= (1<<((15-i)*2)); // 0 -> 01
   	}
-  
+    
   	data3 = 0;
   	for (int i=0;i<16;i++) {
   		if (lo & (1<<(15-i)))
   			data3 |= (1<<(((15-i)*2)+1)); // 1 -> 10
   		else
   			data3 |= (1<<((15-i)*2)); // 0 -> 01
-  	}		
+  	}
   }
-
+  
 	LED_D_ON();
 	// Program the data blocks for supplied ID
 	// and the block 0 for HID format
@@ -1154,18 +1211,38 @@ void CopyHIDtoT55x7(uint32_t hi2, uint32_t hi, uint32_t lo, uint8_t longFMT)
 	  T55xxWriteBlock(data5,5,0,0);
 	  T55xxWriteBlock(data6,6,0,0);
   }
-
+  
 	// Config for HID (RF/50, FSK2a, Maxblock=3 for short/6 for long)
-	T55xxWriteBlock(T55x7_BITRATE_RF_50    |
-			T55x7_MODULATION_FSK2a |
-			last_block << T55x7_MAXBLOCK_SHIFT,
-			0,0,0);
+	T55xxWriteBlock(T55x7_BITRATE_RF_50  |
+                  T55x7_MODULATION_FSK2a |
+                  last_block << T55x7_MAXBLOCK_SHIFT,
+                  0,0,0);
   
 	LED_D_OFF();
 	
 	DbpString("DONE!");
 }
 
+void CopyIOtoT55x7(uint32_t hi, uint32_t lo, uint8_t longFMT)
+{
+   int data1=0, data2=0; //up to six blocks for long format
+  	
+    data1 = hi;  // load preamble
+    data2 = lo;
+    
+    LED_D_ON();
+    // Program the data blocks for supplied ID
+    // and the block 0 for HID format
+    T55xxWriteBlock(data1,1,0,0);
+    T55xxWriteBlock(data2,2,0,0);
+	
+    //Config Block
+    T55xxWriteBlock(0x00147040,0,0,0);
+    LED_D_OFF();
+	
+    DbpString("DONE!");
+}
+
 // Define 9bit header for EM410x tags
 #define EM410X_HEADER		0x1FF
 #define EM410X_ID_LENGTH	40
@@ -1177,6 +1254,7 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
 	uint64_t rev_id = 0;	// reversed ID
 	int c_parity[4];	// column parity
 	int r_parity = 0;	// row parity
+	uint32_t clock = 0;
 
 	// Reverse ID bits given as parameter (for simpler operations)
 	for (i = 0; i < EM410X_ID_LENGTH; ++i) {
@@ -1234,12 +1312,35 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
 	T55xxWriteBlock((uint32_t)id, 2, 0, 0);
 
 	// Config for EM410x (RF/64, Manchester, Maxblock=2)
-	if (card)
+	if (card) {
+		// Clock rate is stored in bits 8-15 of the card value
+		clock = (card & 0xFF00) >> 8;
+		Dbprintf("Clock rate: %d", clock);
+		switch (clock)
+		{
+			case 32:
+				clock = T55x7_BITRATE_RF_32;
+				break;
+			case 16:
+				clock = T55x7_BITRATE_RF_16;
+				break;
+			case 0:
+				// A value of 0 is assumed to be 64 for backwards-compatibility
+				// Fall through...
+			case 64:
+				clock = T55x7_BITRATE_RF_64;
+				break;      
+			default:
+				Dbprintf("Invalid clock rate: %d", clock);
+				return;
+		}
+
 		// Writing configuration for T55x7 tag
-		T55xxWriteBlock(T55x7_BITRATE_RF_64	    |
+		T55xxWriteBlock(clock	    |
 				T55x7_MODULATION_MANCHESTER |
 				2 << T55x7_MAXBLOCK_SHIFT,
 				0, 0, 0);
+  }
 	else
 		// Writing configuration for T5555(Q5) tag
 		T55xxWriteBlock(0x1F << T5555_BITRATE_SHIFT |
@@ -1255,7 +1356,6 @@ void WriteEM410x(uint32_t card, uint32_t id_hi, uint32_t id_lo)
 // Clone Indala 64-bit tag by UID to T55x7
 void CopyIndala64toT55x7(int hi, int lo)
 {
-
 	//Program the 2 data blocks for supplied 64bit UID
 	// and the block 0 for Indala64 format
 	T55xxWriteBlock(hi,1,0,0);
@@ -1264,17 +1364,15 @@ void CopyIndala64toT55x7(int hi, int lo)
 	T55xxWriteBlock(T55x7_BITRATE_RF_32    |
 			T55x7_MODULATION_PSK1 |
 			2 << T55x7_MAXBLOCK_SHIFT,
-			0,0,0);
+			0, 0, 0);
 	//Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=2;Inverse data)
-//	T5567WriteBlock(0x603E1042,0);
+	//	T5567WriteBlock(0x603E1042,0);
 
 	DbpString("DONE!");
-
 }	
 
 void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int uid6, int uid7)
 {
-
 	//Program the 7 data blocks for supplied 224bit UID
 	// and the block 0 for Indala224 format
 	T55xxWriteBlock(uid1,1,0,0);
@@ -1290,171 +1388,170 @@ void CopyIndala224toT55x7(int uid1, int uid2, int uid3, int uid4, int uid5, int
 			7 << T55x7_MAXBLOCK_SHIFT,
 			0,0,0);
 	//Alternative config for Indala (Extended mode;RF/32;PSK1 with RF/2;Maxblock=7;Inverse data)
-//	T5567WriteBlock(0x603E10E2,0);
+	//	T5567WriteBlock(0x603E10E2,0);
 
 	DbpString("DONE!");
-
 }
 
+
 #define abs(x) ( ((x)<0) ? -(x) : (x) )
 #define max(x,y) ( x<y ? y:x)
 
 int DemodPCF7931(uint8_t **outBlocks) {
-  uint8_t BitStream[256];
-  uint8_t Blocks[8][16];
-  uint8_t *GraphBuffer = (uint8_t *)BigBuf;
-  int GraphTraceLen = sizeof(BigBuf);
-  int i, j, lastval, bitidx, half_switch;
-  int clock = 64;
-  int tolerance = clock / 8;
-  int pmc, block_done;
-  int lc, warnings = 0;
-  int num_blocks = 0;
-  int lmin=128, lmax=128;
-  uint8_t dir;
-
-  AcquireRawAdcSamples125k(0);
-
-  lmin = 64;
-  lmax = 192;
-
-  i = 2;
-
-  /* Find first local max/min */
-  if(GraphBuffer[1] > GraphBuffer[0]) {
+	uint8_t BitStream[256];
+	uint8_t Blocks[8][16];
+	uint8_t *GraphBuffer = (uint8_t *)BigBuf;
+	int GraphTraceLen = sizeof(BigBuf);
+	int i, j, lastval, bitidx, half_switch;
+	int clock = 64;
+	int tolerance = clock / 8;
+	int pmc, block_done;
+	int lc, warnings = 0;
+	int num_blocks = 0;
+	int lmin=128, lmax=128;
+	uint8_t dir;
+	
+	AcquireRawAdcSamples125k(0);
+	
+	lmin = 64;
+	lmax = 192;
+	
+	i = 2;
+	
+	/* Find first local max/min */
+	if(GraphBuffer[1] > GraphBuffer[0]) {
     while(i < GraphTraceLen) {
       if( !(GraphBuffer[i] > GraphBuffer[i-1]) && GraphBuffer[i] > lmax)
-	break;
+        break;
       i++;
     }
     dir = 0;
-  }
-  else {
+	}
+	else {
     while(i < GraphTraceLen) {
       if( !(GraphBuffer[i] < GraphBuffer[i-1]) && GraphBuffer[i] < lmin)
-	break;
+        break;
       i++;
     }
     dir = 1;
-  }
-  
-  lastval = i++;
-  half_switch = 0;
-  pmc = 0;
-  block_done = 0;
-  
-  for (bitidx = 0; i < GraphTraceLen; i++)
-    {
-      if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin))
-	{
-	  lc = i - lastval;
-	  lastval = i;
-	  
-	  // Switch depending on lc length:
-	  // Tolerance is 1/8 of clock rate (arbitrary)
-	  if (abs(lc-clock/4) < tolerance) {
-	    // 16T0
-	    if((i - pmc) == lc) { /* 16T0 was previous one */
-	      /* It's a PMC ! */
-	      i += (128+127+16+32+33+16)-1;
-	      lastval = i;
-	      pmc = 0;
-	      block_done = 1;
-	    }
-	    else {
-	      pmc = i;
-	    }
-	  } else if (abs(lc-clock/2) < tolerance) {
-	    // 32TO
-	    if((i - pmc) == lc) { /* 16T0 was previous one */
-	      /* It's a PMC ! */
-	      i += (128+127+16+32+33)-1;
-	      lastval = i;
-	      pmc = 0;
-	      block_done = 1;
-	    }
-	    else if(half_switch == 1) {
-	      BitStream[bitidx++] = 0;
-	      half_switch = 0;
-	    }
-	    else
-	      half_switch++;
-	  } else if (abs(lc-clock) < tolerance) {
-	    // 64TO
-	    BitStream[bitidx++] = 1;
-	  } else {
-	    // Error
-	    warnings++;
-	    if (warnings > 10)
-	      {
-		Dbprintf("Error: too many detection errors, aborting.");
-		return 0;
-	      }
-	  }
-	  
-	  if(block_done == 1) {
-	    if(bitidx == 128) {
-	      for(j=0; j<16; j++) {
-		Blocks[num_blocks][j] = 128*BitStream[j*8+7]+
-		  64*BitStream[j*8+6]+
-		  32*BitStream[j*8+5]+
-		  16*BitStream[j*8+4]+
-		  8*BitStream[j*8+3]+
-		  4*BitStream[j*8+2]+
-		  2*BitStream[j*8+1]+
-		  BitStream[j*8];
-	      }
-	      num_blocks++;
-	    }
-	    bitidx = 0;
-	    block_done = 0;
-	    half_switch = 0;
-	  }
-	  if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0;
-	  else dir = 1;
 	}
-      if(bitidx==255)
-	bitidx=0;
-      warnings = 0;
-      if(num_blocks == 4) break;
+	
+	lastval = i++;
+	half_switch = 0;
+	pmc = 0;
+	block_done = 0;
+	
+	for (bitidx = 0; i < GraphTraceLen; i++)
+	{
+    if ( (GraphBuffer[i-1] > GraphBuffer[i] && dir == 1 && GraphBuffer[i] > lmax) || (GraphBuffer[i-1] < GraphBuffer[i] && dir == 0 && GraphBuffer[i] < lmin))
+    {
+      lc = i - lastval;
+      lastval = i;
+      
+      // Switch depending on lc length:
+      // Tolerance is 1/8 of clock rate (arbitrary)
+      if (abs(lc-clock/4) < tolerance) {
+        // 16T0
+        if((i - pmc) == lc) { /* 16T0 was previous one */
+          /* It's a PMC ! */
+          i += (128+127+16+32+33+16)-1;
+          lastval = i;
+          pmc = 0;
+          block_done = 1;
+        }
+        else {
+          pmc = i;
+        }
+      } else if (abs(lc-clock/2) < tolerance) {
+        // 32TO
+        if((i - pmc) == lc) { /* 16T0 was previous one */
+          /* It's a PMC ! */
+          i += (128+127+16+32+33)-1;
+          lastval = i;
+          pmc = 0;
+          block_done = 1;
+        }
+        else if(half_switch == 1) {
+          BitStream[bitidx++] = 0;
+          half_switch = 0;
+        }
+        else
+          half_switch++;
+      } else if (abs(lc-clock) < tolerance) {
+        // 64TO
+        BitStream[bitidx++] = 1;
+      } else {
+        // Error
+        warnings++;
+        if (warnings > 10)
+        {
+          Dbprintf("Error: too many detection errors, aborting.");
+          return 0;
+        }
+      }
+      
+      if(block_done == 1) {
+        if(bitidx == 128) {
+          for(j=0; j<16; j++) {
+            Blocks[num_blocks][j] = 128*BitStream[j*8+7]+
+            64*BitStream[j*8+6]+
+            32*BitStream[j*8+5]+
+            16*BitStream[j*8+4]+
+            8*BitStream[j*8+3]+
+            4*BitStream[j*8+2]+
+            2*BitStream[j*8+1]+
+            BitStream[j*8];
+          }
+          num_blocks++;
+        }
+        bitidx = 0;
+        block_done = 0;
+        half_switch = 0;
+      }
+      if (GraphBuffer[i-1] > GraphBuffer[i]) dir=0;
+      else dir = 1;
     }
-  memcpy(outBlocks, Blocks, 16*num_blocks);
-  return num_blocks;
+    if(bitidx==255)
+      bitidx=0;
+    warnings = 0;
+    if(num_blocks == 4) break;
+	}
+	memcpy(outBlocks, Blocks, 16*num_blocks);
+	return num_blocks;
 }
 
 int IsBlock0PCF7931(uint8_t *Block) {
-  // Assume RFU means 0 :)
-  if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled
+	// Assume RFU means 0 :)
+	if((memcmp(Block, "\x00\x00\x00\x00\x00\x00\x00\x01", 8) == 0) && memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) // PAC enabled
     return 1;
-  if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ?
+	if((memcmp(Block+9, "\x00\x00\x00\x00\x00\x00\x00", 7) == 0) && Block[7] == 0) // PAC disabled, can it *really* happen ?
     return 1;
-  return 0;
+	return 0;
 }
 
 int IsBlock1PCF7931(uint8_t *Block) {
-  // Assume RFU means 0 :)
-  if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0)
+	// Assume RFU means 0 :)
+	if(Block[10] == 0 && Block[11] == 0 && Block[12] == 0 && Block[13] == 0)
     if((Block[14] & 0x7f) <= 9 && Block[15] <= 9)
       return 1;
-
-  return 0;
+	
+	return 0;
 }
-
 #define ALLOC 16
 
 void ReadPCF7931() {
-  uint8_t Blocks[8][17];
-  uint8_t tmpBlocks[4][16];
-  int i, j, ind, ind2, n;
-  int num_blocks = 0;
-  int max_blocks = 8;
-  int ident = 0;
-  int error = 0;
-  int tries = 0;
-  
-  memset(Blocks, 0, 8*17*sizeof(uint8_t));
-
-  do {
+	uint8_t Blocks[8][17];
+	uint8_t tmpBlocks[4][16];
+	int i, j, ind, ind2, n;
+	int num_blocks = 0;
+	int max_blocks = 8;
+	int ident = 0;
+	int error = 0;
+	int tries = 0;
+	
+	memset(Blocks, 0, 8*17*sizeof(uint8_t));
+	
+	do {
     memset(tmpBlocks, 0, 4*16*sizeof(uint8_t));
     n = DemodPCF7931((uint8_t**)tmpBlocks);
     if(!n)
@@ -1471,272 +1568,279 @@ void ReadPCF7931() {
     
     for(i=0; i<n; i++)
       Dbprintf("(dbg) %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-	       tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7], 
-	       tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]);
+               tmpBlocks[i][0], tmpBlocks[i][1], tmpBlocks[i][2], tmpBlocks[i][3], tmpBlocks[i][4], tmpBlocks[i][5], tmpBlocks[i][6], tmpBlocks[i][7],
+               tmpBlocks[i][8], tmpBlocks[i][9], tmpBlocks[i][10], tmpBlocks[i][11], tmpBlocks[i][12], tmpBlocks[i][13], tmpBlocks[i][14], tmpBlocks[i][15]);
     if(!ident) {
       for(i=0; i<n; i++) {
-	if(IsBlock0PCF7931(tmpBlocks[i])) {
-	  // Found block 0 ?
-	  if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) {
-	    // Found block 1!
-	    // \o/
-	    ident = 1;
-	    memcpy(Blocks[0], tmpBlocks[i], 16);
-	    Blocks[0][ALLOC] = 1;
-	    memcpy(Blocks[1], tmpBlocks[i+1], 16);
-	    Blocks[1][ALLOC] = 1;
-	    max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1;
-	    // Debug print
-	    Dbprintf("(dbg) Max blocks: %d", max_blocks);
-	    num_blocks = 2;
-	    // Handle following blocks
-	    for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) {
-	      if(j==n) j=0;
-	      if(j==i) break;
-	      memcpy(Blocks[ind2], tmpBlocks[j], 16);
-	      Blocks[ind2][ALLOC] = 1;
-	    }
-	    break;
-	  }
-	}
+        if(IsBlock0PCF7931(tmpBlocks[i])) {
+          // Found block 0 ?
+          if(i < n-1 && IsBlock1PCF7931(tmpBlocks[i+1])) {
+            // Found block 1!
+            // \o/
+            ident = 1;
+            memcpy(Blocks[0], tmpBlocks[i], 16);
+            Blocks[0][ALLOC] = 1;
+            memcpy(Blocks[1], tmpBlocks[i+1], 16);
+            Blocks[1][ALLOC] = 1;
+            max_blocks = max((Blocks[1][14] & 0x7f), Blocks[1][15]) + 1;
+            // Debug print
+            Dbprintf("(dbg) Max blocks: %d", max_blocks);
+            num_blocks = 2;
+            // Handle following blocks
+            for(j=i+2, ind2=2; j!=i; j++, ind2++, num_blocks++) {
+              if(j==n) j=0;
+              if(j==i) break;
+              memcpy(Blocks[ind2], tmpBlocks[j], 16);
+              Blocks[ind2][ALLOC] = 1;
+            }
+            break;
+          }
+        }
       }
     }
     else {
       for(i=0; i<n; i++) { // Look for identical block in known blocks
-	if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00
-	  for(j=0; j<max_blocks; j++) {
-	    if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) {
-	      // Found an identical block
-	      for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) {
-		if(ind2 < 0)
-		  ind2 = max_blocks;
-		if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
-		  // Dbprintf("Tmp %d -> Block %d", ind, ind2);
-		  memcpy(Blocks[ind2], tmpBlocks[ind], 16);
-		  Blocks[ind2][ALLOC] = 1;
-		  num_blocks++;
-		  if(num_blocks == max_blocks) goto end;
-		}
-	      }
-	      for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) {
-		if(ind2 > max_blocks)
-		  ind2 = 0;
-		if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
-		  // Dbprintf("Tmp %d -> Block %d", ind, ind2);
-		  memcpy(Blocks[ind2], tmpBlocks[ind], 16);
-		  Blocks[ind2][ALLOC] = 1;
-		  num_blocks++;
-		  if(num_blocks == max_blocks) goto end;
-		}
-	      }
-	    }
-	  }
-	}
+        if(memcmp(tmpBlocks[i], "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 16)) { // Block is not full of 00
+          for(j=0; j<max_blocks; j++) {
+            if(Blocks[j][ALLOC] == 1 && !memcmp(tmpBlocks[i], Blocks[j], 16)) {
+              // Found an identical block
+              for(ind=i-1,ind2=j-1; ind >= 0; ind--,ind2--) {
+                if(ind2 < 0)
+                  ind2 = max_blocks;
+                if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
+                  // Dbprintf("Tmp %d -> Block %d", ind, ind2);
+                  memcpy(Blocks[ind2], tmpBlocks[ind], 16);
+                  Blocks[ind2][ALLOC] = 1;
+                  num_blocks++;
+                  if(num_blocks == max_blocks) goto end;
+                }
+              }
+              for(ind=i+1,ind2=j+1; ind < n; ind++,ind2++) {
+                if(ind2 > max_blocks)
+                  ind2 = 0;
+                if(!Blocks[ind2][ALLOC]) { // Block ind2 not already found
+                  // Dbprintf("Tmp %d -> Block %d", ind, ind2);
+                  memcpy(Blocks[ind2], tmpBlocks[ind], 16);
+                  Blocks[ind2][ALLOC] = 1;
+                  num_blocks++;
+                  if(num_blocks == max_blocks) goto end;
+                }
+              }
+            }
+          }
+        }
       }
     }
     tries++;
     if (BUTTON_PRESS()) return;
-  } while (num_blocks != max_blocks);
- end:
-  Dbprintf("-----------------------------------------");
-  Dbprintf("Memory content:");
-  Dbprintf("-----------------------------------------");
-  for(i=0; i<max_blocks; i++) {
+	} while (num_blocks != max_blocks);
+end:
+	Dbprintf("-----------------------------------------");
+	Dbprintf("Memory content:");
+	Dbprintf("-----------------------------------------");
+	for(i=0; i<max_blocks; i++) {
     if(Blocks[i][ALLOC]==1)
       Dbprintf("%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-	       Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7], 
-	       Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]);
+               Blocks[i][0], Blocks[i][1], Blocks[i][2], Blocks[i][3], Blocks[i][4], Blocks[i][5], Blocks[i][6], Blocks[i][7],
+               Blocks[i][8], Blocks[i][9], Blocks[i][10], Blocks[i][11], Blocks[i][12], Blocks[i][13], Blocks[i][14], Blocks[i][15]);
     else
       Dbprintf("<missing block %d>", i);
-  }
-  Dbprintf("-----------------------------------------");
-  
-  return ;
+	}
+	Dbprintf("-----------------------------------------");
+	
+	return ;
 }
 
 
 //-----------------------------------
-//   EM4469 / EM4305 routines
+// EM4469 / EM4305 routines
 //-----------------------------------
-#define FWD_CMD_LOGIN   0xC      //including the even parity, binary mirrored 
-#define FWD_CMD_WRITE   0xA 
-#define FWD_CMD_READ    0x9 
-#define FWD_CMD_DISABLE 0x5 
+#define FWD_CMD_LOGIN 0xC //including the even parity, binary mirrored
+#define FWD_CMD_WRITE 0xA
+#define FWD_CMD_READ 0x9
+#define FWD_CMD_DISABLE 0x5
+
+
+uint8_t forwardLink_data[64]; //array of forwarded bits
+uint8_t * forward_ptr; //ptr for forward message preparation
+uint8_t fwd_bit_sz; //forwardlink bit counter
+uint8_t * fwd_write_ptr; //forwardlink bit pointer
+
+//====================================================================
+// prepares command bits
+// see EM4469 spec
+//====================================================================
+//--------------------------------------------------------------------
+uint8_t Prepare_Cmd( uint8_t cmd ) {
+  //--------------------------------------------------------------------
+  
+  *forward_ptr++ = 0; //start bit
+  *forward_ptr++ = 0; //second pause for 4050 code
+  
+  *forward_ptr++ = cmd;
+  cmd >>= 1;
+  *forward_ptr++ = cmd;
+  cmd >>= 1;
+  *forward_ptr++ = cmd;
+  cmd >>= 1;
+  *forward_ptr++ = cmd;
+  
+  return 6; //return number of emited bits
+}
 
+//====================================================================
+// prepares address bits
+// see EM4469 spec
+//====================================================================
 
-uint8_t forwardLink_data[64];       //array of forwarded bits  
-uint8_t * forward_ptr;              //ptr for forward message preparation 
-uint8_t fwd_bit_sz;                 //forwardlink bit counter
-uint8_t * fwd_write_ptr;            //forwardlink bit pointer
- 
-//==================================================================== 
-// prepares command bits 
-// see EM4469 spec 
-//==================================================================== 
-//-------------------------------------------------------------------- 
-uint8_t Prepare_Cmd( uint8_t cmd ) { 
-//--------------------------------------------------------------------  
- 
-  *forward_ptr++ = 0;               //start bit 
-  *forward_ptr++ = 0;               //second pause for 4050 code 
- 
-  *forward_ptr++ = cmd; 
-  cmd >>= 1; 
-  *forward_ptr++ = cmd; 
-  cmd >>= 1; 
-  *forward_ptr++ = cmd; 
-  cmd >>= 1;
-  *forward_ptr++ = cmd; 
- 
-  return 6;                         //return number of emited bits 
-} 
- 
-//==================================================================== 
-// prepares address bits 
-// see EM4469 spec 
-//==================================================================== 
- 
-//-------------------------------------------------------------------- 
-uint8_t Prepare_Addr( uint8_t addr ) { 
-//-------------------------------------------------------------------- 
- 
-  register uint8_t line_parity; 
- 
+//--------------------------------------------------------------------
+uint8_t Prepare_Addr( uint8_t addr ) {
+  //--------------------------------------------------------------------
+  
+  register uint8_t line_parity;
+  
   uint8_t i;
   line_parity = 0;
   for(i=0;i<6;i++) {
-    *forward_ptr++ = addr; 
-    line_parity ^= addr; 
+    *forward_ptr++ = addr;
+    line_parity ^= addr;
     addr >>= 1;
   }
   
-  *forward_ptr++ = (line_parity & 1);  
- 
-  return 7;                      //return number of emited bits 
-} 
- 
-//==================================================================== 
-// prepares data bits intreleaved with parity bits 
-// see EM4469 spec 
-//==================================================================== 
- 
-//-------------------------------------------------------------------- 
-uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) { 
-//-------------------------------------------------------------------- 
- 
-  register uint8_t line_parity; 
-  register uint8_t column_parity; 
-  register uint8_t i, j; 
-  register uint16_t data; 
- 
-  data = data_low; 
-  column_parity = 0; 
- 
-  for(i=0; i<4; i++) { 
-    line_parity = 0; 
-    for(j=0; j<8; j++) { 
-      line_parity ^= data; 
-      column_parity ^= (data & 1) << j; 
-      *forward_ptr++ = data; 
-      data >>= 1; 
-    } 
-    *forward_ptr++ = line_parity; 
-    if(i == 1) 
-      data = data_hi; 
-  } 
- 
-  for(j=0; j<8; j++) { 
-    *forward_ptr++ = column_parity; 
-    column_parity >>= 1; 
-  } 
-  *forward_ptr = 0; 
- 
-  return 45;                             //return number of emited bits 
-} 
- 
-//==================================================================== 
-// Forward Link send function 
-// Requires: forwarLink_data filled with valid bits (1 bit per byte) 
-//           fwd_bit_count set with number of bits to be sent 
-//==================================================================== 
-void SendForward(uint8_t fwd_bit_count) {
+  *forward_ptr++ = (line_parity & 1);
+  
+  return 7; //return number of emited bits
+}
 
-  fwd_write_ptr = forwardLink_data;
-  fwd_bit_sz = fwd_bit_count;
+//====================================================================
+// prepares data bits intreleaved with parity bits
+// see EM4469 spec
+//====================================================================
 
-	LED_D_ON();
+//--------------------------------------------------------------------
+uint8_t Prepare_Data( uint16_t data_low, uint16_t data_hi) {
+  //--------------------------------------------------------------------
+  
+  register uint8_t line_parity;
+  register uint8_t column_parity;
+  register uint8_t i, j;
+  register uint16_t data;
+  
+  data = data_low;
+  column_parity = 0;
+  
+  for(i=0; i<4; i++) {
+    line_parity = 0;
+    for(j=0; j<8; j++) {
+      line_parity ^= data;
+      column_parity ^= (data & 1) << j;
+      *forward_ptr++ = data;
+      data >>= 1;
+    }
+    *forward_ptr++ = line_parity;
+    if(i == 1)
+      data = data_hi;
+  }
+  
+  for(j=0; j<8; j++) {
+    *forward_ptr++ = column_parity;
+    column_parity >>= 1;
+  }
+  *forward_ptr = 0;
+  
+  return 45; //return number of emited bits
+}
 
+//====================================================================
+// Forward Link send function
+// Requires: forwarLink_data filled with valid bits (1 bit per byte)
+// fwd_bit_count set with number of bits to be sent
+//====================================================================
+void SendForward(uint8_t fwd_bit_count) {
+  
+  fwd_write_ptr = forwardLink_data;
+  fwd_bit_sz = fwd_bit_count;
+  
+  LED_D_ON();
+  
   //Field on
- 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);
-	
-	// Give it a bit of time for the resonant antenna to settle.
-	// And for the tag to fully power up
-	SpinDelay(150);
-	
+  FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+  FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);
+  
+  // Give it a bit of time for the resonant antenna to settle.
+  // And for the tag to fully power up
+  SpinDelay(150);
+  
   // force 1st mod pulse (start gap must be longer for 4305)
-  fwd_bit_sz--;                        //prepare next bit modulation 
-  fwd_write_ptr++; 
+  fwd_bit_sz--; //prepare next bit modulation
+  fwd_write_ptr++;
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
   SpinDelayUs(55*8); //55 cycles off (8us each)for 4305
   FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);//field on
+  FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
   SpinDelayUs(16*8); //16 cycles on (8us each)
-
-	// now start writting
-  while(fwd_bit_sz-- > 0) {                   //prepare next bit modulation
-    if(((*fwd_write_ptr++) & 1) == 1) 
+  
+  // now start writting
+  while(fwd_bit_sz-- > 0) { //prepare next bit modulation
+    if(((*fwd_write_ptr++) & 1) == 1)
       SpinDelayUs(32*8); //32 cycles at 125Khz (8us each)
     else {
       //These timings work for 4469/4269/4305 (with the 55*8 above)
-	    FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+      FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
       SpinDelayUs(23*8); //16-4 cycles off (8us each)
- 	    FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
-	    FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_READER);//field on
+      FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
+      FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD);//field on
       SpinDelayUs(9*8); //16 cycles on (8us each)
     }
-  } 
+  }
 }
 
-void Login (uint32_t Password) {
-
-  uint8_t fwd_bit_count;
-
-  forward_ptr = forwardLink_data; 
-  fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN ); 
-  fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 ); 
 
-  SendForward(fwd_bit_count); 
+void EM4xLogin(uint32_t Password) {
   
-  //Wait for command to complete 
-	SpinDelay(20);
-
-} 
-
-void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { 
- 
   uint8_t fwd_bit_count;
-	uint8_t *dest = (uint8_t *)BigBuf;
-	int m=0, i=0;
- 
-  //If password mode do login
-  if (PwdMode == 1) Login(Pwd);
+  
+  forward_ptr = forwardLink_data;
+  fwd_bit_count = Prepare_Cmd( FWD_CMD_LOGIN );
+  fwd_bit_count += Prepare_Data( Password&0xFFFF, Password>>16 );
+  
+  SendForward(fwd_bit_count);
+  
+  //Wait for command to complete
+  SpinDelay(20);
+  
+}
 
-  forward_ptr = forwardLink_data; 
-  fwd_bit_count  = Prepare_Cmd( FWD_CMD_READ ); 
-  fwd_bit_count += Prepare_Addr( Address ); 
+void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
+  
+  	uint8_t *dest =  mifare_get_bigbufptr();
+	uint16_t bufferlength = 12000;
+	uint32_t i = 0;
 
-	m = sizeof(BigBuf);
-  // Clear destination buffer before sending the command
-	memset(dest, 128, m);
+	// Clear destination buffer before sending the command  0x80 = average.
+	memset(dest, 0x80, bufferlength);
+	
+	uint8_t fwd_bit_count;
+  
+	//If password mode do login
+	if (PwdMode == 1) EM4xLogin(Pwd);
+  
+	forward_ptr = forwardLink_data;
+	fwd_bit_count = Prepare_Cmd( FWD_CMD_READ );
+	fwd_bit_count += Prepare_Addr( Address );
+  
 	// Connect the A/D to the peak-detected low-frequency path.
 	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
 	// Now set up the SSC to get the ADC samples that are now streaming at us.
 	FpgaSetupSsc();
-
-  SendForward(fwd_bit_count); 
   
-	// Now do the acquisition 
+	SendForward(fwd_bit_count);
+  
+	// // Turn field on to read the response
+	// TurnReadLFOn();
+	
+	// Now do the acquisition
 	i = 0;
 	for(;;) {
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_TXRDY) {
@@ -1744,31 +1848,32 @@ void EM4xReadWord(uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
 		}
 		if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
 			dest[i] = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
-			i++;
-			if (i >= m) break;
+			++i;
+			if (i >= bufferlength) break;
 		}
 	}
-  FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
+  
+	cmd_send(CMD_ACK,0,0,0,0,0);
+	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
 	LED_D_OFF();
 }
 
-void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) { 
- 
+void EM4xWriteWord(uint32_t Data, uint8_t Address, uint32_t Pwd, uint8_t PwdMode) {
+  
   uint8_t fwd_bit_count;
- 
+  
   //If password mode do login
-  if (PwdMode == 1) Login(Pwd);
-  	
-  forward_ptr = forwardLink_data; 
-  fwd_bit_count  = Prepare_Cmd( FWD_CMD_WRITE ); 
-  fwd_bit_count += Prepare_Addr( Address ); 
-  fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 ); 
-
-  SendForward(fwd_bit_count); 
+  if (PwdMode == 1) EM4xLogin(Pwd);
   
-  //Wait for write to complete 
-	SpinDelay(20);
+  forward_ptr = forwardLink_data;
+  fwd_bit_count = Prepare_Cmd( FWD_CMD_WRITE );
+  fwd_bit_count += Prepare_Addr( Address );
+  fwd_bit_count += Prepare_Data( Data&0xFFFF, Data>>16 );
+  
+  SendForward(fwd_bit_count);
+  
+  //Wait for write to complete
+  SpinDelay(20);
   FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF); // field off
-	LED_D_OFF();
+  LED_D_OFF();
 }
-