X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/da9d456e9fabb82fcaefdddcaac50d38b35cf3d9..961658bba9f9deac3d1fd58a13fd92b428b1af40:/client/proxmark3.c

diff --git a/client/proxmark3.c b/client/proxmark3.c
index 91bc7b31..d2bb2011 100644
--- a/client/proxmark3.c
+++ b/client/proxmark3.c
@@ -23,6 +23,8 @@
 #include "uart.h"
 #include "ui.h"
 #include "sleep.h"
+#include "cmdparser.h"
+#include "cmdmain.h"
 
 // a global mutex to prevent interlaced printing from different threads
 pthread_mutex_t print_lock;
@@ -31,7 +33,6 @@ static serial_port sp;
 static UsbCommand txcmd;
 volatile static bool txcmd_pending = false;
 
-
 void SendCommand(UsbCommand *c) {
 #if 0
   printf("Sending %d bytes\n", sizeof(UsbCommand));
@@ -47,6 +48,11 @@ void SendCommand(UsbCommand *c) {
       return;
     }
 
+	/**
+	The while-loop below causes hangups at times, when the pm3 unit is unresponsive
+	or disconnected. The main console thread is alive, but comm thread just spins here.
+	Not good.../holiman
+	**/
   while(txcmd_pending);
   txcmd = *c;
   txcmd_pending = true;
@@ -61,21 +67,6 @@ struct main_loop_arg {
   char *script_cmds_file;
 };
 
-//static void *usb_receiver(void *targ) {
-//  struct receiver_arg *arg = (struct receiver_arg*)targ;
-//  UsbCommand cmdbuf;
-//
-//  while (arg->run) {
-//    if (ReceiveCommandPoll(&cmdbuf)) {
-//      UsbCommandReceived(&cmdbuf);
-//      fflush(NULL);
-//    }
-//  }
-//
-//  pthread_exit(NULL);
-//  return NULL;
-//}
-
 byte_t rx[0x1000000];
 byte_t* prx = rx;
 
@@ -206,15 +197,38 @@ static void *main_loop(void *targ) {
   return NULL;
 }
 
+static void dumpAllHelp(int markdown)
+{
+  printf("\n%sProxmark3 command dump%s\n\n",markdown?"# ":"",markdown?"":"\n======================");
+  printf("Some commands are available only if a Proxmark is actually connected.%s\n",markdown?"  ":"");
+  printf("Check column \"offline\" for their availability.\n");
+  printf("\n");
+  command_t *cmds = getTopLevelCommandTable();
+  dumpCommandsRecursive(cmds, markdown);
+}
+
 int main(int argc, char* argv[]) {
 	srand(time(0));
   
 	if (argc < 2) {
 		printf("syntax: %s <port>\n\n",argv[0]);
 		printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
+		printf("help:   %s -h\n\n", argv[0]);
+		printf("\tDump all interactive help at once\n");
+		printf("markdown:   %s -m\n\n", argv[0]);
+		printf("\tDump all interactive help at once in markdown syntax\n");
 		return 1;
 	}
-  
+	if (strcmp(argv[1], "-h") == 0) {
+		printf("syntax: %s <port>\n\n",argv[0]);
+		printf("\tLinux example:'%s /dev/ttyACM0'\n\n", argv[0]);
+		dumpAllHelp(0);
+		return 0;
+	}
+	if (strcmp(argv[1], "-m") == 0) {
+		dumpAllHelp(1);
+		return 0;
+	}
 	// Make sure to initialize
 	struct main_loop_arg marg = {
 		.usb_present = 0,
@@ -222,17 +236,6 @@ int main(int argc, char* argv[]) {
 	};
 	pthread_t main_loop_t;
 
-/*
-  usb_init();
-  if (!OpenProxmark(1)) {
-    fprintf(stderr,"PROXMARK3: NOT FOUND!\n");
-    marg.usb_present = 0;
-    offline = 1;
-  } else {
-    marg.usb_present = 1;
-    offline = 0;
-  }
-*/
   
 	sp = uart_open(argv[1]);
 	if (sp == INVALID_SERIAL_PORT) {
@@ -273,10 +276,6 @@ int main(int argc, char* argv[]) {
 
 	pthread_join(main_loop_t, NULL);
 
-//  if (marg.usb_present == 1) {
-//    CloseProxmark();
-//  }
-
 	// Clean up the port
 	uart_close(sp);