X-Git-Url: http://cvs.zerfleddert.de/cgi-bin/gitweb.cgi/proxmark3-svn/blobdiff_plain/e12b82d362238b49d3b4b88ff7d7a1d7e618bac8..1c70664ae75332e17466e8d7bcba718e406da36c:/client/flash.c?ds=sidebyside

diff --git a/client/flash.c b/client/flash.c
index 9f547915..0b940e99 100644
--- a/client/flash.c
+++ b/client/flash.c
@@ -11,9 +11,10 @@
 #include <stdio.h>
 #include <string.h>
 #include <stdlib.h>
+#include <inttypes.h>
+#include <unistd.h>
 #include "proxmark3.h"
-#include "sleep.h"
-//#include "proxusb.h"
+#include "util.h"
 #include "flash.h"
 #include "elf.h"
 #include "proxendian.h"
@@ -276,7 +277,6 @@ static int get_proxmark_state(uint32_t *state)
 {
 	UsbCommand c;
 	c.cmd = CMD_DEVICE_INFO;
-//	SendCommand_(&c);
   SendCommand(&c);
 	UsbCommand resp;
 	ReceiveCommand(&resp);
@@ -297,7 +297,7 @@ static int get_proxmark_state(uint32_t *state)
 			*state = resp.arg[0];
 			break;
 		default:
-			fprintf(stderr, "Error: Couldn't get proxmark state, bad response type: 0x%04"llx"\n", resp.cmd);
+			fprintf(stderr, "Error: Couldn't get proxmark state, bad response type: 0x%04" PRIx64 "\n", resp.cmd);
 			return -1;
 			break;
 	}
@@ -340,8 +340,7 @@ static int enter_bootloader(char *serial_port_name)
     msleep(100);
 		CloseProxmark();
 
-		fprintf(stderr,"Waiting for Proxmark to reappear on ");
-		fprintf(stderr,serial_port_name);
+		fprintf(stderr,"Waiting for Proxmark to reappear on %s",serial_port_name);
     do {
 			sleep(1);
 			fprintf(stderr, ".");
@@ -360,7 +359,7 @@ static int wait_for_ack(void)
   UsbCommand ack;
 	ReceiveCommand(&ack);
 	if (ack.cmd != CMD_ACK) {
-		printf("Error: Unexpected reply 0x%04"llx" (expected ACK)\n", ack.cmd);
+		printf("Error: Unexpected reply 0x%04" PRIx64 " (expected ACK)\n", ack.cmd);
 		return -1;
 	}
 	return 0;
@@ -392,7 +391,6 @@ int flash_start_flashing(int enable_bl_writes,char *serial_port_name)
 			c.arg[2] = 0;
 		}
 		SendCommand(&c);
-//		SendCommand_(&c);
 		return wait_for_ack();
 	} else {
 		fprintf(stderr, "Note: Your bootloader does not understand the new START_FLASH command\n");
@@ -409,22 +407,8 @@ static int write_block(uint32_t address, uint8_t *data, uint32_t length)
 	memset(block_buf, 0xFF, BLOCK_SIZE);
 	memcpy(block_buf, data, length);
   UsbCommand c;
-/*
-	c.cmd = {CMD_SETUP_WRITE};
-	for (int i = 0; i < 240; i += 48) {
-		memcpy(c.d.asBytes, block_buf + i, 48);
-		c.arg[0] = i / 4;
-		SendCommand(&c);
-//		SendCommand_(&c);
-		if (wait_for_ack() < 0) {
-			return -1;
-    }
-	}
-*/
 	c.cmd = CMD_FINISH_WRITE;
 	c.arg[0] = address;
-//	memcpy(c.d.asBytes, block_buf+240, 16);
-//	SendCommand_(&c);
 	memcpy(c.d.asBytes, block_buf, length);
   SendCommand(&c);
   return wait_for_ack();
@@ -487,7 +471,6 @@ void flash_free(flash_file_t *ctx)
 // just reset the unit
 int flash_stop_flashing(void) {
 	UsbCommand c = {CMD_HARDWARE_RESET};
-//	SendCommand_(&c);
   SendCommand(&c);
   msleep(100);
   return 0;